diff options
Diffstat (limited to 'include/hw/arm')
| -rw-r--r-- | include/hw/arm/devices.h | 70 | ||||
| -rw-r--r-- | include/hw/arm/exynos4210.h | 137 | ||||
| -rw-r--r-- | include/hw/arm/imx.h | 34 | ||||
| -rw-r--r-- | include/hw/arm/omap.h | 1015 | ||||
| -rw-r--r-- | include/hw/arm/primecell.h | 12 | ||||
| -rw-r--r-- | include/hw/arm/pxa.h | 191 | ||||
| -rw-r--r-- | include/hw/arm/sharpsl.h | 17 | ||||
| -rw-r--r-- | include/hw/arm/soc_dma.h | 116 |
8 files changed, 1592 insertions, 0 deletions
diff --git a/include/hw/arm/devices.h b/include/hw/arm/devices.h new file mode 100644 index 0000000..c60bcab --- /dev/null +++ b/include/hw/arm/devices.h @@ -0,0 +1,70 @@ +#ifndef QEMU_DEVICES_H +#define QEMU_DEVICES_H + +#include "hw/irq.h" + +/* ??? Not all users of this file can include cpu-common.h. */ +struct MemoryRegion; + +/* Devices that have nowhere better to go. */ + +/* smc91c111.c */ +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +/* lan9118.c */ +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, + MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +/* blizzard.c */ +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +/* cbus.c */ +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +/* tc6393xb.c */ +typedef struct TC6393xbState TC6393xbState; +#define TC6393XB_RAM 0x110000 /* amount of ram for Video and USB */ +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +void tc6393xb_gpio_out_set(TC6393xbState *s, int line, + qemu_irq handler); +qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +/* sm501.c */ +void sm501_init(struct MemoryRegion *address_space_mem, uint32_t base, + uint32_t local_mem_bytes, qemu_irq irq, + CharDriverState *chr); + +#endif diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h new file mode 100644 index 0000000..bb9a1dd --- /dev/null +++ b/include/hw/arm/exynos4210.h @@ -0,0 +1,137 @@ +/* + * Samsung exynos4210 SoC emulation + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved. + * Maksim Kozlov <m.kozlov@samsung.com> + * Evgeny Voevodin <e.voevodin@samsung.com> + * Igor Mitsyanko <i.mitsyanko@samsung.com> + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + + +#ifndef EXYNOS4210_H_ +#define EXYNOS4210_H_ + +#include "qemu-common.h" +#include "exec/memory.h" + +#define EXYNOS4210_NCPUS 2 + +#define EXYNOS4210_DRAM0_BASE_ADDR 0x40000000 +#define EXYNOS4210_DRAM1_BASE_ADDR 0xa0000000 +#define EXYNOS4210_DRAM_MAX_SIZE 0x60000000 /* 1.5 GB */ + +#define EXYNOS4210_IROM_BASE_ADDR 0x00000000 +#define EXYNOS4210_IROM_SIZE 0x00010000 /* 64 KB */ +#define EXYNOS4210_IROM_MIRROR_BASE_ADDR 0x02000000 +#define EXYNOS4210_IROM_MIRROR_SIZE 0x00010000 /* 64 KB */ + +#define EXYNOS4210_IRAM_BASE_ADDR 0x02020000 +#define EXYNOS4210_IRAM_SIZE 0x00020000 /* 128 KB */ + +/* Secondary CPU startup code is in IROM memory */ +#define EXYNOS4210_SMP_BOOT_ADDR EXYNOS4210_IROM_BASE_ADDR +#define EXYNOS4210_SMP_BOOT_SIZE 0x1000 +#define EXYNOS4210_BASE_BOOT_ADDR EXYNOS4210_DRAM0_BASE_ADDR +/* Secondary CPU polling address to get loader start from */ +#define EXYNOS4210_SECOND_CPU_BOOTREG 0x10020814 + +#define EXYNOS4210_SMP_PRIVATE_BASE_ADDR 0x10500000 +#define EXYNOS4210_L2X0_BASE_ADDR 0x10502000 + +/* + * exynos4210 IRQ subsystem stub definitions. + */ +#define EXYNOS4210_IRQ_GATE_NINPUTS 2 /* Internal and External GIC */ + +#define EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ 64 +#define EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ 16 +#define EXYNOS4210_MAX_INT_COMBINER_IN_IRQ \ + (EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ * 8) +#define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ + (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) + +#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit)) +#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) +#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ + ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) + +/* IRQs number for external and internal GIC */ +#define EXYNOS4210_EXT_GIC_NIRQ (160-32) +#define EXYNOS4210_INT_GIC_NIRQ 64 + +#define EXYNOS4210_I2C_NUMBER 9 + +typedef struct Exynos4210Irq { + qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; + qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; + qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ]; + qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; + qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; +} Exynos4210Irq; + +typedef struct Exynos4210State { + ARMCPU *cpu[EXYNOS4210_NCPUS]; + Exynos4210Irq irqs; + qemu_irq *irq_table; + + MemoryRegion chipid_mem; + MemoryRegion iram_mem; + MemoryRegion irom_mem; + MemoryRegion irom_alias_mem; + MemoryRegion dram0_mem; + MemoryRegion dram1_mem; + MemoryRegion boot_secondary; + MemoryRegion bootreg_mem; + i2c_bus *i2c_if[EXYNOS4210_I2C_NUMBER]; +} Exynos4210State; + +void exynos4210_write_secondary(ARMCPU *cpu, + const struct arm_boot_info *info); + +Exynos4210State *exynos4210_init(MemoryRegion *system_mem, + unsigned long ram_size); + +/* Initialize exynos4210 IRQ subsystem stub */ +qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); + +/* Initialize board IRQs. + * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ +void exynos4210_init_board_irqs(Exynos4210Irq *s); + +/* Get IRQ number from exynos4210 IRQ subsystem stub. + * To identify IRQ source use internal combiner group and bit number + * grp - group number + * bit - bit number inside group */ +uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit); + +/* + * Get Combiner input GPIO into irqs structure + */ +void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, + int ext); + +/* + * exynos4210 UART + */ +DeviceState *exynos4210_uart_create(hwaddr addr, + int fifo_size, + int channel, + CharDriverState *chr, + qemu_irq irq); + +#endif /* EXYNOS4210_H_ */ diff --git a/include/hw/arm/imx.h b/include/hw/arm/imx.h new file mode 100644 index 0000000..ea9e093 --- /dev/null +++ b/include/hw/arm/imx.h @@ -0,0 +1,34 @@ +/* + * i.MX31 emulation + * + * Copyright (C) 2012 Peter Chubb + * NICTA + * + * This code is released under the GPL, version 2.0 or later + * See the file `../COPYING' for details. + */ + +#ifndef IMX_H +#define IMX_H + +void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq); + +typedef enum { + NOCLK, + MCU, + HSP, + IPG, + CLK_32k +} IMXClk; + +uint32_t imx_clock_frequency(DeviceState *s, IMXClk clock); + +void imx_timerp_create(const hwaddr addr, + qemu_irq irq, + DeviceState *ccm); +void imx_timerg_create(const hwaddr addr, + qemu_irq irq, + DeviceState *ccm); + + +#endif /* IMX_H */ diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h new file mode 100644 index 0000000..188cda8 --- /dev/null +++ b/include/hw/arm/omap.h @@ -0,0 +1,1015 @@ +/* + * Texas Instruments OMAP processors. + * + * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef hw_omap_h +#include "exec/memory.h" +# define hw_omap_h "omap.h" +#include "hw/irq.h" + +# define OMAP_EMIFS_BASE 0x00000000 +# define OMAP2_Q0_BASE 0x00000000 +# define OMAP_CS0_BASE 0x00000000 +# define OMAP_CS1_BASE 0x04000000 +# define OMAP_CS2_BASE 0x08000000 +# define OMAP_CS3_BASE 0x0c000000 +# define OMAP_EMIFF_BASE 0x10000000 +# define OMAP_IMIF_BASE 0x20000000 +# define OMAP_LOCALBUS_BASE 0x30000000 +# define OMAP2_Q1_BASE 0x40000000 +# define OMAP2_L4_BASE 0x48000000 +# define OMAP2_SRAM_BASE 0x40200000 +# define OMAP2_L3_BASE 0x68000000 +# define OMAP2_Q2_BASE 0x80000000 +# define OMAP2_Q3_BASE 0xc0000000 +# define OMAP_MPUI_BASE 0xe1000000 + +# define OMAP730_SRAM_SIZE 0x00032000 +# define OMAP15XX_SRAM_SIZE 0x00030000 +# define OMAP16XX_SRAM_SIZE 0x00004000 +# define OMAP1611_SRAM_SIZE 0x0003e800 +# define OMAP242X_SRAM_SIZE 0x000a0000 +# define OMAP243X_SRAM_SIZE 0x00010000 +# define OMAP_CS0_SIZE 0x04000000 +# define OMAP_CS1_SIZE 0x04000000 +# define OMAP_CS2_SIZE 0x04000000 +# define OMAP_CS3_SIZE 0x04000000 + +/* omap_clk.c */ +struct omap_mpu_state_s; +typedef struct clk *omap_clk; +omap_clk omap_findclk(struct omap_mpu_state_s *mpu, const char *name); +void omap_clk_init(struct omap_mpu_state_s *mpu); +void omap_clk_adduser(struct clk *clk, qemu_irq user); +void omap_clk_get(omap_clk clk); +void omap_clk_put(omap_clk clk); +void omap_clk_onoff(omap_clk clk, int on); +void omap_clk_canidle(omap_clk clk, int can); +void omap_clk_setrate(omap_clk clk, int divide, int multiply); +int64_t omap_clk_getrate(omap_clk clk); +void omap_clk_reparent(omap_clk clk, omap_clk parent); + +/* OMAP2 l4 Interconnect */ +struct omap_l4_s; +struct omap_l4_region_s { + hwaddr offset; + size_t size; + int access; +}; +struct omap_l4_agent_info_s { + int ta; + int region; + int regions; + int ta_region; +}; +struct omap_target_agent_s { + MemoryRegion iomem; + struct omap_l4_s *bus; + int regions; + const struct omap_l4_region_s *start; + hwaddr base; + uint32_t component; + uint32_t control; + uint32_t status; +}; +struct omap_l4_s *omap_l4_init(MemoryRegion *address_space, + hwaddr base, int ta_num); + +struct omap_target_agent_s; +struct omap_target_agent_s *omap_l4ta_get( + struct omap_l4_s *bus, + const struct omap_l4_region_s *regions, + const struct omap_l4_agent_info_s *agents, + int cs); +hwaddr omap_l4_attach(struct omap_target_agent_s *ta, + int region, MemoryRegion *mr); +hwaddr omap_l4_region_base(struct omap_target_agent_s *ta, + int region); +hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, + int region); + +/* OMAP2 SDRAM controller */ +struct omap_sdrc_s; +struct omap_sdrc_s *omap_sdrc_init(MemoryRegion *sysmem, + hwaddr base); +void omap_sdrc_reset(struct omap_sdrc_s *s); + +/* OMAP2 general purpose memory controller */ +struct omap_gpmc_s; +struct omap_gpmc_s *omap_gpmc_init(struct omap_mpu_state_s *mpu, + hwaddr base, + qemu_irq irq, qemu_irq drq); +void omap_gpmc_reset(struct omap_gpmc_s *s); +void omap_gpmc_attach(struct omap_gpmc_s *s, int cs, MemoryRegion *iomem); +void omap_gpmc_attach_nand(struct omap_gpmc_s *s, int cs, DeviceState *nand); + +/* + * Common IRQ numbers for level 1 interrupt handler + * See /usr/include/asm-arm/arch-omap/irqs.h in Linux. + */ +# define OMAP_INT_CAMERA 1 +# define OMAP_INT_FIQ 3 +# define OMAP_INT_RTDX 6 +# define OMAP_INT_DSP_MMU_ABORT 7 +# define OMAP_INT_HOST 8 +# define OMAP_INT_ABORT 9 +# define OMAP_INT_BRIDGE_PRIV 13 +# define OMAP_INT_GPIO_BANK1 14 +# define OMAP_INT_UART3 15 +# define OMAP_INT_TIMER3 16 +# define OMAP_INT_DMA_CH0_6 19 +# define OMAP_INT_DMA_CH1_7 20 +# define OMAP_INT_DMA_CH2_8 21 +# define OMAP_INT_DMA_CH3 22 +# define OMAP_INT_DMA_CH4 23 +# define OMAP_INT_DMA_CH5 24 +# define OMAP_INT_DMA_LCD 25 +# define OMAP_INT_TIMER1 26 +# define OMAP_INT_WD_TIMER 27 +# define OMAP_INT_BRIDGE_PUB 28 +# define OMAP_INT_TIMER2 30 +# define OMAP_INT_LCD_CTRL 31 + +/* + * Common OMAP-15xx IRQ numbers for level 1 interrupt handler + */ +# define OMAP_INT_15XX_IH2_IRQ 0 +# define OMAP_INT_15XX_LB_MMU 17 +# define OMAP_INT_15XX_LOCAL_BUS 29 + +/* + * OMAP-1510 specific IRQ numbers for level 1 interrupt handler + */ +# define OMAP_INT_1510_SPI_TX 4 +# define OMAP_INT_1510_SPI_RX 5 +# define OMAP_INT_1510_DSP_MAILBOX1 10 +# define OMAP_INT_1510_DSP_MAILBOX2 11 + +/* + * OMAP-310 specific IRQ numbers for level 1 interrupt handler + */ +# define OMAP_INT_310_McBSP2_TX 4 +# define OMAP_INT_310_McBSP2_RX 5 +# define OMAP_INT_310_HSB_MAILBOX1 12 +# define OMAP_INT_310_HSAB_MMU 18 + +/* + * OMAP-1610 specific IRQ numbers for level 1 interrupt handler + */ +# define OMAP_INT_1610_IH2_IRQ 0 +# define OMAP_INT_1610_IH2_FIQ 2 +# define OMAP_INT_1610_McBSP2_TX 4 +# define OMAP_INT_1610_McBSP2_RX 5 +# define OMAP_INT_1610_DSP_MAILBOX1 10 +# define OMAP_INT_1610_DSP_MAILBOX2 11 +# define OMAP_INT_1610_LCD_LINE 12 +# define OMAP_INT_1610_GPTIMER1 17 +# define OMAP_INT_1610_GPTIMER2 18 +# define OMAP_INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-730 specific IRQ numbers for level 1 interrupt handler + */ +# define OMAP_INT_730_IH2_FIQ 0 +# define OMAP_INT_730_IH2_IRQ 1 +# define OMAP_INT_730_USB_NON_ISO 2 +# define OMAP_INT_730_USB_ISO 3 +# define OMAP_INT_730_ICR 4 +# define OMAP_INT_730_EAC 5 +# define OMAP_INT_730_GPIO_BANK1 6 +# define OMAP_INT_730_GPIO_BANK2 7 +# define OMAP_INT_730_GPIO_BANK3 8 +# define OMAP_INT_730_McBSP2TX 10 +# define OMAP_INT_730_McBSP2RX 11 +# define OMAP_INT_730_McBSP2RX_OVF 12 +# define OMAP_INT_730_LCD_LINE 14 +# define OMAP_INT_730_GSM_PROTECT 15 +# define OMAP_INT_730_TIMER3 16 +# define OMAP_INT_730_GPIO_BANK5 17 +# define OMAP_INT_730_GPIO_BANK6 18 +# define OMAP_INT_730_SPGIO_WR 29 + +/* + * Common IRQ numbers for level 2 interrupt handler + */ +# define OMAP_INT_KEYBOARD 1 +# define OMAP_INT_uWireTX 2 +# define OMAP_INT_uWireRX 3 +# define OMAP_INT_I2C 4 +# define OMAP_INT_MPUIO 5 +# define OMAP_INT_USB_HHC_1 6 +# define OMAP_INT_McBSP3TX 10 +# define OMAP_INT_McBSP3RX 11 +# define OMAP_INT_McBSP1TX 12 +# define OMAP_INT_McBSP1RX 13 +# define OMAP_INT_UART1 14 +# define OMAP_INT_UART2 15 +# define OMAP_INT_USB_W2FC 20 +# define OMAP_INT_1WIRE 21 +# define OMAP_INT_OS_TIMER 22 +# define OMAP_INT_OQN 23 +# define OMAP_INT_GAUGE_32K 24 +# define OMAP_INT_RTC_TIMER 25 +# define OMAP_INT_RTC_ALARM 26 +# define OMAP_INT_DSP_MMU 28 + +/* + * OMAP-1510 specific IRQ numbers for level 2 interrupt handler + */ +# define OMAP_INT_1510_BT_MCSI1TX 16 +# define OMAP_INT_1510_BT_MCSI1RX 17 +# define OMAP_INT_1510_SoSSI_MATCH 19 +# define OMAP_INT_1510_MEM_STICK 27 +# define OMAP_INT_1510_COM_SPI_RO 31 + +/* + * OMAP-310 specific IRQ numbers for level 2 interrupt handler + */ +# define OMAP_INT_310_FAC 0 +# define OMAP_INT_310_USB_HHC_2 7 +# define OMAP_INT_310_MCSI1_FE 16 +# define OMAP_INT_310_MCSI2_FE 17 +# define OMAP_INT_310_USB_W2FC_ISO 29 +# define OMAP_INT_310_USB_W2FC_NON_ISO 30 +# define OMAP_INT_310_McBSP2RX_OF 31 + +/* + * OMAP-1610 specific IRQ numbers for level 2 interrupt handler + */ +# define OMAP_INT_1610_FAC 0 +# define OMAP_INT_1610_USB_HHC_2 7 +# define OMAP_INT_1610_USB_OTG 8 +# define OMAP_INT_1610_SoSSI 9 +# define OMAP_INT_1610_BT_MCSI1TX 16 +# define OMAP_INT_1610_BT_MCSI1RX 17 +# define OMAP_INT_1610_SoSSI_MATCH 19 +# define OMAP_INT_1610_MEM_STICK 27 +# define OMAP_INT_1610_McBSP2RX_OF 31 +# define OMAP_INT_1610_STI 32 +# define OMAP_INT_1610_STI_WAKEUP 33 +# define OMAP_INT_1610_GPTIMER3 34 +# define OMAP_INT_1610_GPTIMER4 35 +# define OMAP_INT_1610_GPTIMER5 36 +# define OMAP_INT_1610_GPTIMER6 37 +# define OMAP_INT_1610_GPTIMER7 38 +# define OMAP_INT_1610_GPTIMER8 39 +# define OMAP_INT_1610_GPIO_BANK2 40 +# define OMAP_INT_1610_GPIO_BANK3 41 +# define OMAP_INT_1610_MMC2 42 +# define OMAP_INT_1610_CF 43 +# define OMAP_INT_1610_WAKE_UP_REQ 46 +# define OMAP_INT_1610_GPIO_BANK4 48 +# define OMAP_INT_1610_SPI 49 +# define OMAP_INT_1610_DMA_CH6 53 +# define OMAP_INT_1610_DMA_CH7 54 +# define OMAP_INT_1610_DMA_CH8 55 +# define OMAP_INT_1610_DMA_CH9 56 +# define OMAP_INT_1610_DMA_CH10 57 +# define OMAP_INT_1610_DMA_CH11 58 +# define OMAP_INT_1610_DMA_CH12 59 +# define OMAP_INT_1610_DMA_CH13 60 +# define OMAP_INT_1610_DMA_CH14 61 +# define OMAP_INT_1610_DMA_CH15 62 +# define OMAP_INT_1610_NAND 63 + +/* + * OMAP-730 specific IRQ numbers for level 2 interrupt handler + */ +# define OMAP_INT_730_HW_ERRORS 0 +# define OMAP_INT_730_NFIQ_PWR_FAIL 1 +# define OMAP_INT_730_CFCD 2 +# define OMAP_INT_730_CFIREQ 3 +# define OMAP_INT_730_I2C 4 +# define OMAP_INT_730_PCC 5 +# define OMAP_INT_730_MPU_EXT_NIRQ 6 +# define OMAP_INT_730_SPI_100K_1 7 +# define OMAP_INT_730_SYREN_SPI 8 +# define OMAP_INT_730_VLYNQ 9 +# define OMAP_INT_730_GPIO_BANK4 10 +# define OMAP_INT_730_McBSP1TX 11 +# define OMAP_INT_730_McBSP1RX 12 +# define OMAP_INT_730_McBSP1RX_OF 13 +# define OMAP_INT_730_UART_MODEM_IRDA_2 14 +# define OMAP_INT_730_UART_MODEM_1 15 +# define OMAP_INT_730_MCSI 16 +# define OMAP_INT_730_uWireTX 17 +# define OMAP_INT_730_uWireRX 18 +# define OMAP_INT_730_SMC_CD 19 +# define OMAP_INT_730_SMC_IREQ 20 +# define OMAP_INT_730_HDQ_1WIRE 21 +# define OMAP_INT_730_TIMER32K 22 +# define OMAP_INT_730_MMC_SDIO 23 +# define OMAP_INT_730_UPLD 24 +# define OMAP_INT_730_USB_HHC_1 27 +# define OMAP_INT_730_USB_HHC_2 28 +# define OMAP_INT_730_USB_GENI 29 +# define OMAP_INT_730_USB_OTG 30 +# define OMAP_INT_730_CAMERA_IF 31 +# define OMAP_INT_730_RNG 32 +# define OMAP_INT_730_DUAL_MODE_TIMER 33 +# define OMAP_INT_730_DBB_RF_EN 34 +# define OMAP_INT_730_MPUIO_KEYPAD 35 +# define OMAP_INT_730_SHA1_MD5 36 +# define OMAP_INT_730_SPI_100K_2 37 +# define OMAP_INT_730_RNG_IDLE 38 +# define OMAP_INT_730_MPUIO 39 +# define OMAP_INT_730_LLPC_LCD_CTRL_OFF 40 +# define OMAP_INT_730_LLPC_OE_FALLING 41 +# define OMAP_INT_730_LLPC_OE_RISING 42 +# define OMAP_INT_730_LLPC_VSYNC 43 +# define OMAP_INT_730_WAKE_UP_REQ 46 +# define OMAP_INT_730_DMA_CH6 53 +# define OMAP_INT_730_DMA_CH7 54 +# define OMAP_INT_730_DMA_CH8 55 +# define OMAP_INT_730_DMA_CH9 56 +# define OMAP_INT_730_DMA_CH10 57 +# define OMAP_INT_730_DMA_CH11 58 +# define OMAP_INT_730_DMA_CH12 59 +# define OMAP_INT_730_DMA_CH13 60 +# define OMAP_INT_730_DMA_CH14 61 +# define OMAP_INT_730_DMA_CH15 62 +# define OMAP_INT_730_NAND 63 + +/* + * OMAP-24xx common IRQ numbers + */ +# define OMAP_INT_24XX_STI 4 +# define OMAP_INT_24XX_SYS_NIRQ 7 +# define OMAP_INT_24XX_L3_IRQ 10 +# define OMAP_INT_24XX_PRCM_MPU_IRQ 11 +# define OMAP_INT_24XX_SDMA_IRQ0 12 +# define OMAP_INT_24XX_SDMA_IRQ1 13 +# define OMAP_INT_24XX_SDMA_IRQ2 14 +# define OMAP_INT_24XX_SDMA_IRQ3 15 +# define OMAP_INT_243X_MCBSP2_IRQ 16 +# define OMAP_INT_243X_MCBSP3_IRQ 17 +# define OMAP_INT_243X_MCBSP4_IRQ 18 +# define OMAP_INT_243X_MCBSP5_IRQ 19 +# define OMAP_INT_24XX_GPMC_IRQ 20 +# define OMAP_INT_24XX_GUFFAW_IRQ 21 +# define OMAP_INT_24XX_IVA_IRQ 22 +# define OMAP_INT_24XX_EAC_IRQ 23 +# define OMAP_INT_24XX_CAM_IRQ 24 +# define OMAP_INT_24XX_DSS_IRQ 25 +# define OMAP_INT_24XX_MAIL_U0_MPU 26 +# define OMAP_INT_24XX_DSP_UMA 27 +# define OMAP_INT_24XX_DSP_MMU 28 +# define OMAP_INT_24XX_GPIO_BANK1 29 +# define OMAP_INT_24XX_GPIO_BANK2 30 +# define OMAP_INT_24XX_GPIO_BANK3 31 +# define OMAP_INT_24XX_GPIO_BANK4 32 +# define OMAP_INT_243X_GPIO_BANK5 33 +# define OMAP_INT_24XX_MAIL_U3_MPU 34 +# define OMAP_INT_24XX_WDT3 35 +# define OMAP_INT_24XX_WDT4 36 +# define OMAP_INT_24XX_GPTIMER1 37 +# define OMAP_INT_24XX_GPTIMER2 38 +# define OMAP_INT_24XX_GPTIMER3 39 +# define OMAP_INT_24XX_GPTIMER4 40 +# define OMAP_INT_24XX_GPTIMER5 41 +# define OMAP_INT_24XX_GPTIMER6 42 +# define OMAP_INT_24XX_GPTIMER7 43 +# define OMAP_INT_24XX_GPTIMER8 44 +# define OMAP_INT_24XX_GPTIMER9 45 +# define OMAP_INT_24XX_GPTIMER10 46 +# define OMAP_INT_24XX_GPTIMER11 47 +# define OMAP_INT_24XX_GPTIMER12 48 +# define OMAP_INT_24XX_PKA_IRQ 50 +# define OMAP_INT_24XX_SHA1MD5_IRQ 51 +# define OMAP_INT_24XX_RNG_IRQ 52 +# define OMAP_INT_24XX_MG_IRQ 53 +# define OMAP_INT_24XX_I2C1_IRQ 56 +# define OMAP_INT_24XX_I2C2_IRQ 57 +# define OMAP_INT_24XX_MCBSP1_IRQ_TX 59 +# define OMAP_INT_24XX_MCBSP1_IRQ_RX 60 +# define OMAP_INT_24XX_MCBSP2_IRQ_TX 62 +# define OMAP_INT_24XX_MCBSP2_IRQ_RX 63 +# define OMAP_INT_243X_MCBSP1_IRQ 64 +# define OMAP_INT_24XX_MCSPI1_IRQ 65 +# define OMAP_INT_24XX_MCSPI2_IRQ 66 +# define OMAP_INT_24XX_SSI1_IRQ0 67 +# define OMAP_INT_24XX_SSI1_IRQ1 68 +# define OMAP_INT_24XX_SSI2_IRQ0 69 +# define OMAP_INT_24XX_SSI2_IRQ1 70 +# define OMAP_INT_24XX_SSI_GDD_IRQ 71 +# define OMAP_INT_24XX_UART1_IRQ 72 +# define OMAP_INT_24XX_UART2_IRQ 73 +# define OMAP_INT_24XX_UART3_IRQ 74 +# define OMAP_INT_24XX_USB_IRQ_GEN 75 +# define OMAP_INT_24XX_USB_IRQ_NISO 76 +# define OMAP_INT_24XX_USB_IRQ_ISO 77 +# define OMAP_INT_24XX_USB_IRQ_HGEN 78 +# define OMAP_INT_24XX_USB_IRQ_HSOF 79 +# define OMAP_INT_24XX_USB_IRQ_OTG 80 +# define OMAP_INT_24XX_VLYNQ_IRQ 81 +# define OMAP_INT_24XX_MMC_IRQ 83 +# define OMAP_INT_24XX_MS_IRQ 84 +# define OMAP_INT_24XX_FAC_IRQ 85 +# define OMAP_INT_24XX_MCSPI3_IRQ 91 +# define OMAP_INT_243X_HS_USB_MC 92 +# define OMAP_INT_243X_HS_USB_DMA 93 +# define OMAP_INT_243X_CARKIT 94 +# define OMAP_INT_34XX_GPTIMER12 95 + +/* omap_dma.c */ +enum omap_dma_model { + omap_dma_3_0, + omap_dma_3_1, + omap_dma_3_2, + omap_dma_4, +}; + +struct soc_dma_s; +struct soc_dma_s *omap_dma_init(hwaddr base, qemu_irq *irqs, + MemoryRegion *sysmem, + qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk, + enum omap_dma_model model); +struct soc_dma_s *omap_dma4_init(hwaddr base, qemu_irq *irqs, + MemoryRegion *sysmem, + struct omap_mpu_state_s *mpu, int fifo, + int chans, omap_clk iclk, omap_clk fclk); +void omap_dma_reset(struct soc_dma_s *s); + +struct dma_irq_map { + int ih; + int intr; +}; + +/* Only used in OMAP DMA 3.x gigacells */ +enum omap_dma_port { + emiff = 0, + emifs, + imif, /* omap16xx: ocp_t1 */ + tipb, + local, /* omap16xx: ocp_t2 */ + tipb_mpui, + __omap_dma_port_last, +}; + +typedef enum { + constant = 0, + post_incremented, + single_index, + double_index, +} omap_dma_addressing_t; + +/* Only used in OMAP DMA 3.x gigacells */ +struct omap_dma_lcd_channel_s { + enum omap_dma_port src; + hwaddr src_f1_top; + hwaddr src_f1_bottom; + hwaddr src_f2_top; + hwaddr src_f2_bottom; + + /* Used in OMAP DMA 3.2 gigacell */ + unsigned char brust_f1; + unsigned char pack_f1; + unsigned char data_type_f1; + unsigned char brust_f2; + unsigned char pack_f2; + unsigned char data_type_f2; + unsigned char end_prog; + unsigned char repeat; + unsigned char auto_init; + unsigned char priority; + unsigned char fs; + unsigned char running; + unsigned char bs; + unsigned char omap_3_1_compatible_disable; + unsigned char dst; + unsigned char lch_type; + int16_t element_index_f1; + int16_t element_index_f2; + int32_t frame_index_f1; + int32_t frame_index_f2; + uint16_t elements_f1; + uint16_t frames_f1; + uint16_t elements_f2; + uint16_t frames_f2; + omap_dma_addressing_t mode_f1; + omap_dma_addressing_t mode_f2; + + /* Destination port is fixed. */ + int interrupts; + int condition; + int dual; + + int current_frame; + hwaddr phys_framebuffer[2]; + qemu_irq irq; + struct omap_mpu_state_s *mpu; +} *omap_dma_get_lcdch(struct soc_dma_s *s); + +/* + * DMA request numbers for OMAP1 + * See /usr/include/asm-arm/arch-omap/dma.h in Linux. + */ +# define OMAP_DMA_NO_DEVICE 0 +# define OMAP_DMA_MCSI1_TX 1 +# define OMAP_DMA_MCSI1_RX 2 +# define OMAP_DMA_I2C_RX 3 +# define OMAP_DMA_I2C_TX 4 +# define OMAP_DMA_EXT_NDMA_REQ0 5 +# define OMAP_DMA_EXT_NDMA_REQ1 6 +# define OMAP_DMA_UWIRE_TX 7 +# define OMAP_DMA_MCBSP1_TX 8 +# define OMAP_DMA_MCBSP1_RX 9 +# define OMAP_DMA_MCBSP3_TX 10 +# define OMAP_DMA_MCBSP3_RX 11 +# define OMAP_DMA_UART1_TX 12 +# define OMAP_DMA_UART1_RX 13 +# define OMAP_DMA_UART2_TX 14 +# define OMAP_DMA_UART2_RX 15 +# define OMAP_DMA_MCBSP2_TX 16 +# define OMAP_DMA_MCBSP2_RX 17 +# define OMAP_DMA_UART3_TX 18 +# define OMAP_DMA_UART3_RX 19 +# define OMAP_DMA_CAMERA_IF_RX 20 +# define OMAP_DMA_MMC_TX 21 +# define OMAP_DMA_MMC_RX 22 +# define OMAP_DMA_NAND 23 /* Not in OMAP310 */ +# define OMAP_DMA_IRQ_LCD_LINE 24 /* Not in OMAP310 */ +# define OMAP_DMA_MEMORY_STICK 25 /* Not in OMAP310 */ +# define OMAP_DMA_USB_W2FC_RX0 26 +# define OMAP_DMA_USB_W2FC_RX1 27 +# define OMAP_DMA_USB_W2FC_RX2 28 +# define OMAP_DMA_USB_W2FC_TX0 29 +# define OMAP_DMA_USB_W2FC_TX1 30 +# define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +# define OMAP_DMA_CRYPTO_DES_IN 32 +# define OMAP_DMA_SPI_TX 33 +# define OMAP_DMA_SPI_RX 34 +# define OMAP_DMA_CRYPTO_HASH 35 +# define OMAP_DMA_CCP_ATTN 36 +# define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +# define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +# define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +# define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +# define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +# define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +# define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +# define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +# define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +# define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +# define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +# define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +# define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +# define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +# define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +# define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +# define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +# define OMAP_DMA_MMC2_TX 54 +# define OMAP_DMA_MMC2_RX 55 +# define OMAP_DMA_CRYPTO_DES_OUT 56 + +/* + * DMA request numbers for the OMAP2 + */ +# define OMAP24XX_DMA_NO_DEVICE 0 +# define OMAP24XX_DMA_XTI_DMA 1 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_EXT_DMAREQ0 2 +# define OMAP24XX_DMA_EXT_DMAREQ1 3 +# define OMAP24XX_DMA_GPMC 4 +# define OMAP24XX_DMA_GFX 5 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_DSS 6 +# define OMAP24XX_DMA_VLYNQ_TX 7 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_CWT 8 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_AES_TX 9 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_AES_RX 10 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_DES_TX 11 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_DES_RX 12 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_SHA1MD5_RX 13 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_EXT_DMAREQ2 14 +# define OMAP24XX_DMA_EXT_DMAREQ3 15 +# define OMAP24XX_DMA_EXT_DMAREQ4 16 +# define OMAP24XX_DMA_EAC_AC_RD 17 +# define OMAP24XX_DMA_EAC_AC_WR 18 +# define OMAP24XX_DMA_EAC_MD_UL_RD 19 +# define OMAP24XX_DMA_EAC_MD_UL_WR 20 +# define OMAP24XX_DMA_EAC_MD_DL_RD 21 +# define OMAP24XX_DMA_EAC_MD_DL_WR 22 +# define OMAP24XX_DMA_EAC_BT_UL_RD 23 +# define OMAP24XX_DMA_EAC_BT_UL_WR 24 +# define OMAP24XX_DMA_EAC_BT_DL_RD 25 +# define OMAP24XX_DMA_EAC_BT_DL_WR 26 +# define OMAP24XX_DMA_I2C1_TX 27 +# define OMAP24XX_DMA_I2C1_RX 28 +# define OMAP24XX_DMA_I2C2_TX 29 +# define OMAP24XX_DMA_I2C2_RX 30 +# define OMAP24XX_DMA_MCBSP1_TX 31 +# define OMAP24XX_DMA_MCBSP1_RX 32 +# define OMAP24XX_DMA_MCBSP2_TX 33 +# define OMAP24XX_DMA_MCBSP2_RX 34 +# define OMAP24XX_DMA_SPI1_TX0 35 +# define OMAP24XX_DMA_SPI1_RX0 36 +# define OMAP24XX_DMA_SPI1_TX1 37 +# define OMAP24XX_DMA_SPI1_RX1 38 +# define OMAP24XX_DMA_SPI1_TX2 39 +# define OMAP24XX_DMA_SPI1_RX2 40 +# define OMAP24XX_DMA_SPI1_TX3 41 +# define OMAP24XX_DMA_SPI1_RX3 42 +# define OMAP24XX_DMA_SPI2_TX0 43 +# define OMAP24XX_DMA_SPI2_RX0 44 +# define OMAP24XX_DMA_SPI2_TX1 45 +# define OMAP24XX_DMA_SPI2_RX1 46 + +# define OMAP24XX_DMA_UART1_TX 49 +# define OMAP24XX_DMA_UART1_RX 50 +# define OMAP24XX_DMA_UART2_TX 51 +# define OMAP24XX_DMA_UART2_RX 52 +# define OMAP24XX_DMA_UART3_TX 53 +# define OMAP24XX_DMA_UART3_RX 54 +# define OMAP24XX_DMA_USB_W2FC_TX0 55 +# define OMAP24XX_DMA_USB_W2FC_RX0 56 +# define OMAP24XX_DMA_USB_W2FC_TX1 57 +# define OMAP24XX_DMA_USB_W2FC_RX1 58 +# define OMAP24XX_DMA_USB_W2FC_TX2 59 +# define OMAP24XX_DMA_USB_W2FC_RX2 60 +# define OMAP24XX_DMA_MMC1_TX 61 +# define OMAP24XX_DMA_MMC1_RX 62 +# define OMAP24XX_DMA_MS 63 /* Not in OMAP2420 */ +# define OMAP24XX_DMA_EXT_DMAREQ5 64 + +/* omap[123].c */ +/* OMAP2 gp timer */ +struct omap_gp_timer_s; +struct omap_gp_timer_s *omap_gp_timer_init(struct omap_target_agent_s *ta, + qemu_irq irq, omap_clk fclk, omap_clk iclk); +void omap_gp_timer_reset(struct omap_gp_timer_s *s); + +/* OMAP2 sysctimer */ +struct omap_synctimer_s; +struct omap_synctimer_s *omap_synctimer_init(struct omap_target_agent_s *ta, + struct omap_mpu_state_s *mpu, omap_clk fclk, omap_clk iclk); +void omap_synctimer_reset(struct omap_synctimer_s *s); + +struct omap_uart_s; +struct omap_uart_s *omap_uart_init(hwaddr base, + qemu_irq irq, omap_clk fclk, omap_clk iclk, + qemu_irq txdma, qemu_irq rxdma, + const char *label, CharDriverState *chr); +struct omap_uart_s *omap2_uart_init(MemoryRegion *sysmem, + struct omap_target_agent_s *ta, + qemu_irq irq, omap_clk fclk, omap_clk iclk, + qemu_irq txdma, qemu_irq rxdma, + const char *label, CharDriverState *chr); +void omap_uart_reset(struct omap_uart_s *s); +void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr); + +struct omap_mpuio_s; +qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); +void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); +void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); + +struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +}; +struct omap_uwire_s; +void omap_uwire_attach(struct omap_uwire_s *s, + uWireSlave *slave, int chipselect); + +/* OMAP2 spi */ +struct omap_mcspi_s; +struct omap_mcspi_s *omap_mcspi_init(struct omap_target_agent_s *ta, int chnum, + qemu_irq irq, qemu_irq *drq, omap_clk fclk, omap_clk iclk); +void omap_mcspi_attach(struct omap_mcspi_s *s, + uint32_t (*txrx)(void *opaque, uint32_t, int), void *opaque, + int chipselect); +void omap_mcspi_reset(struct omap_mcspi_s *s); + +struct I2SCodec { + void *opaque; + + /* The CPU can call this if it is generating the clock signal on the + * i2s port. The CODEC can ignore it if it is set up as a clock + * master and generates its own clock. */ + void (*set_rate)(void *opaque, int in, int out); + + void (*tx_swallow)(void *opaque); + qemu_irq rx_swallow; + qemu_irq tx_start; + + int tx_rate; + int cts; + int rx_rate; + int rts; + + struct i2s_fifo_s { + uint8_t *fifo; + int len; + int start; + int size; + } in, out; +}; +struct omap_mcbsp_s; +void omap_mcbsp_i2s_attach(struct omap_mcbsp_s *s, I2SCodec *slave); + +void omap_tap_init(struct omap_target_agent_s *ta, + struct omap_mpu_state_s *mpu); + +/* omap_lcdc.c */ +struct omap_lcd_panel_s; +void omap_lcdc_reset(struct omap_lcd_panel_s *s); +struct omap_lcd_panel_s *omap_lcdc_init(MemoryRegion *sysmem, + hwaddr base, + qemu_irq irq, + struct omap_dma_lcd_channel_s *dma, + omap_clk clk); + +/* omap_dss.c */ +struct rfbi_chip_s { + void *opaque; + void (*write)(void *opaque, int dc, uint16_t value); + void (*block)(void *opaque, int dc, void *buf, size_t len, int pitch); + uint16_t (*read)(void *opaque, int dc); +}; +struct omap_dss_s; +void omap_dss_reset(struct omap_dss_s *s); +struct omap_dss_s *omap_dss_init(struct omap_target_agent_s *ta, + MemoryRegion *sysmem, + hwaddr l3_base, + qemu_irq irq, qemu_irq drq, + omap_clk fck1, omap_clk fck2, omap_clk ck54m, + omap_clk ick1, omap_clk ick2); +void omap_rfbi_attach(struct omap_dss_s *s, int cs, struct rfbi_chip_s *chip); + +/* omap_mmc.c */ +struct omap_mmc_s; +struct omap_mmc_s *omap_mmc_init(hwaddr base, + MemoryRegion *sysmem, + BlockDriverState *bd, + qemu_irq irq, qemu_irq dma[], omap_clk clk); +struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta, + BlockDriverState *bd, qemu_irq irq, qemu_irq dma[], + omap_clk fclk, omap_clk iclk); +void omap_mmc_reset(struct omap_mmc_s *s); +void omap_mmc_handlers(struct omap_mmc_s *s, qemu_irq ro, qemu_irq cover); +void omap_mmc_enable(struct omap_mmc_s *s, int enable); + +/* omap_i2c.c */ +i2c_bus *omap_i2c_bus(DeviceState *omap_i2c); + +# define cpu_is_omap310(cpu) (cpu->mpu_model == omap310) +# define cpu_is_omap1510(cpu) (cpu->mpu_model == omap1510) +# define cpu_is_omap1610(cpu) (cpu->mpu_model == omap1610) +# define cpu_is_omap1710(cpu) (cpu->mpu_model == omap1710) +# define cpu_is_omap2410(cpu) (cpu->mpu_model == omap2410) +# define cpu_is_omap2420(cpu) (cpu->mpu_model == omap2420) +# define cpu_is_omap2430(cpu) (cpu->mpu_model == omap2430) +# define cpu_is_omap3430(cpu) (cpu->mpu_model == omap3430) +# define cpu_is_omap3630(cpu) (cpu->mpu_model == omap3630) + +# define cpu_is_omap15xx(cpu) \ + (cpu_is_omap310(cpu) || cpu_is_omap1510(cpu)) +# define cpu_is_omap16xx(cpu) \ + (cpu_is_omap1610(cpu) || cpu_is_omap1710(cpu)) +# define cpu_is_omap24xx(cpu) \ + (cpu_is_omap2410(cpu) || cpu_is_omap2420(cpu) || cpu_is_omap2430(cpu)) + +# define cpu_class_omap1(cpu) \ + (cpu_is_omap15xx(cpu) || cpu_is_omap16xx(cpu)) +# define cpu_class_omap2(cpu) cpu_is_omap24xx(cpu) +# define cpu_class_omap3(cpu) \ + (cpu_is_omap3430(cpu) || cpu_is_omap3630(cpu)) + +struct omap_mpu_state_s { + enum omap_mpu_model { + omap310, + omap1510, + omap1610, + omap1710, + omap2410, + omap2420, + omap2422, + omap2423, + omap2430, + omap3430, + omap3630, + } mpu_model; + + ARMCPU *cpu; + + qemu_irq *drq; + + qemu_irq wakeup; + + MemoryRegion ulpd_pm_iomem; + MemoryRegion pin_cfg_iomem; + MemoryRegion id_iomem; + MemoryRegion id_iomem_e18; + MemoryRegion id_iomem_ed4; + MemoryRegion id_iomem_e20; + MemoryRegion mpui_iomem; + MemoryRegion tcmi_iomem; + MemoryRegion clkm_iomem; + MemoryRegion clkdsp_iomem; + MemoryRegion mpui_io_iomem; + MemoryRegion tap_iomem; + MemoryRegion imif_ram; + MemoryRegion emiff_ram; + MemoryRegion sdram; + MemoryRegion sram; + + struct omap_dma_port_if_s { + uint32_t (*read[3])(struct omap_mpu_state_s *s, + hwaddr offset); + void (*write[3])(struct omap_mpu_state_s *s, + hwaddr offset, uint32_t value); + int (*addr_valid)(struct omap_mpu_state_s *s, + hwaddr addr); + } port[__omap_dma_port_last]; + + unsigned long sdram_size; + unsigned long sram_size; + + /* MPUI-TIPB peripherals */ + struct omap_uart_s *uart[3]; + + DeviceState *gpio; + + struct omap_mcbsp_s *mcbsp1; + struct omap_mcbsp_s *mcbsp3; + + /* MPU public TIPB peripherals */ + struct omap_32khz_timer_s *os_timer; + + struct omap_mmc_s *mmc; + + struct omap_mpuio_s *mpuio; + + struct omap_uwire_s *microwire; + + struct omap_pwl_s *pwl; + struct omap_pwt_s *pwt; + DeviceState *i2c[2]; + + struct omap_rtc_s *rtc; + + struct omap_mcbsp_s *mcbsp2; + + struct omap_lpg_s *led[2]; + + /* MPU private TIPB peripherals */ + DeviceState *ih[2]; + + struct soc_dma_s *dma; + + struct omap_mpu_timer_s *timer[3]; + struct omap_watchdog_timer_s *wdt; + + struct omap_lcd_panel_s *lcd; + + uint32_t ulpd_pm_regs[21]; + int64_t ulpd_gauge_start; + + uint32_t func_mux_ctrl[14]; + uint32_t comp_mode_ctrl[1]; + uint32_t pull_dwn_ctrl[4]; + uint32_t gate_inh_ctrl[1]; + uint32_t voltage_ctrl[1]; + uint32_t test_dbg_ctrl[1]; + uint32_t mod_conf_ctrl[1]; + int compat1509; + + uint32_t mpui_ctrl; + + struct omap_tipb_bridge_s *private_tipb; + struct omap_tipb_bridge_s *public_tipb; + + uint32_t tcmi_regs[17]; + + struct dpll_ctl_s *dpll[3]; + + omap_clk clks; + struct { + int cold_start; + int clocking_scheme; + uint16_t arm_ckctl; + uint16_t arm_idlect1; + uint16_t arm_idlect2; + uint16_t arm_ewupct; + uint16_t arm_rstct1; + uint16_t arm_rstct2; + uint16_t arm_ckout1; + int dpll1_mode; + uint16_t dsp_idlect1; + uint16_t dsp_idlect2; + uint16_t dsp_rstct2; + } clkm; + + /* OMAP2-only peripherals */ + struct omap_l4_s *l4; + + struct omap_gp_timer_s *gptimer[12]; + struct omap_synctimer_s *synctimer; + + struct omap_prcm_s *prcm; + struct omap_sdrc_s *sdrc; + struct omap_gpmc_s *gpmc; + struct omap_sysctl_s *sysc; + + struct omap_mcspi_s *mcspi[2]; + + struct omap_dss_s *dss; + + struct omap_eac_s *eac; +}; + +/* omap1.c */ +struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, + unsigned long sdram_size, + const char *core); + +/* omap2.c */ +struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, + unsigned long sdram_size, + const char *core); + +#define OMAP_FMT_plx "%#08" HWADDR_PRIx + +uint32_t omap_badwidth_read8(void *opaque, hwaddr addr); +void omap_badwidth_write8(void *opaque, hwaddr addr, + uint32_t value); +uint32_t omap_badwidth_read16(void *opaque, hwaddr addr); +void omap_badwidth_write16(void *opaque, hwaddr addr, + uint32_t value); +uint32_t omap_badwidth_read32(void *opaque, hwaddr addr); +void omap_badwidth_write32(void *opaque, hwaddr addr, + uint32_t value); + +void omap_mpu_wakeup(void *opaque, int irq, int req); + +# define OMAP_BAD_REG(paddr) \ + fprintf(stderr, "%s: Bad register " OMAP_FMT_plx "\n", \ + __FUNCTION__, paddr) +# define OMAP_RO_REG(paddr) \ + fprintf(stderr, "%s: Read-only register " OMAP_FMT_plx "\n", \ + __FUNCTION__, paddr) + +/* OMAP-specific Linux bootloader tags for the ATAG_BOARD area + (Board-specifc tags are not here) */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_MMC 0x4f02 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a +#define OMAP_TAG_PARTITION 0x4f0b +#define OMAP_TAG_TEA5761 0x4f10 +#define OMAP_TAG_TMP105 0x4f11 +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART_STR 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +enum { + OMAP_GPIOSW_TYPE_COVER = 0 << 4, + OMAP_GPIOSW_TYPE_CONNECTION = 1 << 4, + OMAP_GPIOSW_TYPE_ACTIVITY = 2 << 4, +}; + +#define OMAP_GPIOSW_INVERTED 0x0001 +#define OMAP_GPIOSW_OUTPUT 0x0002 + +# define TCMI_VERBOSE 1 + +# ifdef TCMI_VERBOSE +# define OMAP_8B_REG(paddr) \ + fprintf(stderr, "%s: 8-bit register " OMAP_FMT_plx "\n", \ + __FUNCTION__, paddr) +# define OMAP_16B_REG(paddr) \ + fprintf(stderr, "%s: 16-bit register " OMAP_FMT_plx "\n", \ + __FUNCTION__, paddr) +# define OMAP_32B_REG(paddr) \ + fprintf(stderr, "%s: 32-bit register " OMAP_FMT_plx "\n", \ + __FUNCTION__, paddr) +# else +# define OMAP_8B_REG(paddr) +# define OMAP_16B_REG(paddr) +# define OMAP_32B_REG(paddr) +# endif + +# define OMAP_MPUI_REG_MASK 0x000007ff + +#endif /* hw_omap_h */ diff --git a/include/hw/arm/primecell.h b/include/hw/arm/primecell.h new file mode 100644 index 0000000..7337c3b --- /dev/null +++ b/include/hw/arm/primecell.h @@ -0,0 +1,12 @@ +#ifndef PRIMECELL_H +#define PRIMECELL_H + +/* Declarations for ARM PrimeCell based periperals. */ +/* Also includes some devices that are currently only used by the + ARM boards. */ + +/* arm_sysctl GPIO lines */ +#define ARM_SYSCTL_GPIO_MMC_WPROT 0 +#define ARM_SYSCTL_GPIO_MMC_CARDIN 1 + +#endif diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h new file mode 100644 index 0000000..668232c --- /dev/null +++ b/include/hw/arm/pxa.h @@ -0,0 +1,191 @@ +/* + * Intel XScale PXA255/270 processor support. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski <balrog@zabor.org> + * + * This code is licensed under the GNU GPL v2. + */ +#ifndef PXA_H +# define PXA_H "pxa.h" + +#include "exec/memory.h" + +/* Interrupt numbers */ +# define PXA2XX_PIC_SSP3 0 +# define PXA2XX_PIC_USBH2 2 +# define PXA2XX_PIC_USBH1 3 +# define PXA2XX_PIC_KEYPAD 4 +# define PXA2XX_PIC_PWRI2C 6 +# define PXA25X_PIC_HWUART 7 +# define PXA27X_PIC_OST_4_11 7 +# define PXA2XX_PIC_GPIO_0 8 +# define PXA2XX_PIC_GPIO_1 9 +# define PXA2XX_PIC_GPIO_X 10 +# define PXA2XX_PIC_I2S 13 +# define PXA26X_PIC_ASSP 15 +# define PXA25X_PIC_NSSP 16 +# define PXA27X_PIC_SSP2 16 +# define PXA2XX_PIC_LCD 17 +# define PXA2XX_PIC_I2C 18 +# define PXA2XX_PIC_ICP 19 +# define PXA2XX_PIC_STUART 20 +# define PXA2XX_PIC_BTUART 21 +# define PXA2XX_PIC_FFUART 22 +# define PXA2XX_PIC_MMC 23 +# define PXA2XX_PIC_SSP 24 +# define PXA2XX_PIC_DMA 25 +# define PXA2XX_PIC_OST_0 26 +# define PXA2XX_PIC_RTC1HZ 30 +# define PXA2XX_PIC_RTCALARM 31 + +/* DMA requests */ +# define PXA2XX_RX_RQ_I2S 2 +# define PXA2XX_TX_RQ_I2S 3 +# define PXA2XX_RX_RQ_BTUART 4 +# define PXA2XX_TX_RQ_BTUART 5 +# define PXA2XX_RX_RQ_FFUART 6 +# define PXA2XX_TX_RQ_FFUART 7 +# define PXA2XX_RX_RQ_SSP1 13 +# define PXA2XX_TX_RQ_SSP1 14 +# define PXA2XX_RX_RQ_SSP2 15 +# define PXA2XX_TX_RQ_SSP2 16 +# define PXA2XX_RX_RQ_ICP 17 +# define PXA2XX_TX_RQ_ICP 18 +# define PXA2XX_RX_RQ_STUART 19 +# define PXA2XX_TX_RQ_STUART 20 +# define PXA2XX_RX_RQ_MMCI 21 +# define PXA2XX_TX_RQ_MMCI 22 +# define PXA2XX_USB_RQ(x) ((x) + 24) +# define PXA2XX_RX_RQ_SSP3 66 +# define PXA2XX_TX_RQ_SSP3 67 + +# define PXA2XX_SDRAM_BASE 0xa0000000 +# define PXA2XX_INTERNAL_BASE 0x5c000000 +# define PXA2XX_INTERNAL_SIZE 0x40000 + +/* pxa2xx_pic.c */ +DeviceState *pxa2xx_pic_init(hwaddr base, ARMCPU *cpu); + +/* pxa2xx_gpio.c */ +DeviceState *pxa2xx_gpio_init(hwaddr base, + ARMCPU *cpu, DeviceState *pic, int lines); +void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler); + +/* pxa2xx_dma.c */ +DeviceState *pxa255_dma_init(hwaddr base, qemu_irq irq); +DeviceState *pxa27x_dma_init(hwaddr base, qemu_irq irq); + +/* pxa2xx_lcd.c */ +typedef struct PXA2xxLCDState PXA2xxLCDState; +PXA2xxLCDState *pxa2xx_lcdc_init(MemoryRegion *sysmem, + hwaddr base, qemu_irq irq); +void pxa2xx_lcd_vsync_notifier(PXA2xxLCDState *s, qemu_irq handler); +void pxa2xx_lcdc_oritentation(void *opaque, int angle); + +/* pxa2xx_mmci.c */ +typedef struct PXA2xxMMCIState PXA2xxMMCIState; +PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem, + hwaddr base, + BlockDriverState *bd, qemu_irq irq, + qemu_irq rx_dma, qemu_irq tx_dma); +void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly, + qemu_irq coverswitch); + +/* pxa2xx_pcmcia.c */ +typedef struct PXA2xxPCMCIAState PXA2xxPCMCIAState; +PXA2xxPCMCIAState *pxa2xx_pcmcia_init(MemoryRegion *sysmem, + hwaddr base); +int pxa2xx_pcmcia_attach(void *opaque, PCMCIACardState *card); +int pxa2xx_pcmcia_dettach(void *opaque); +void pxa2xx_pcmcia_set_irq_cb(void *opaque, qemu_irq irq, qemu_irq cd_irq); + +/* pxa2xx_keypad.c */ +struct keymap { + int column; + int row; +}; +typedef struct PXA2xxKeyPadState PXA2xxKeyPadState; +PXA2xxKeyPadState *pxa27x_keypad_init(MemoryRegion *sysmem, + hwaddr base, + qemu_irq irq); +void pxa27x_register_keypad(PXA2xxKeyPadState *kp, struct keymap *map, + int size); + +/* pxa2xx.c */ +typedef struct PXA2xxI2CState PXA2xxI2CState; +PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, + qemu_irq irq, uint32_t page_size); +i2c_bus *pxa2xx_i2c_bus(PXA2xxI2CState *s); + +typedef struct PXA2xxI2SState PXA2xxI2SState; +typedef struct PXA2xxFIrState PXA2xxFIrState; + +typedef struct { + ARMCPU *cpu; + DeviceState *pic; + qemu_irq reset; + MemoryRegion sdram; + MemoryRegion internal; + MemoryRegion cm_iomem; + MemoryRegion mm_iomem; + MemoryRegion pm_iomem; + DeviceState *dma; + DeviceState *gpio; + PXA2xxLCDState *lcd; + SSIBus **ssp; + PXA2xxI2CState *i2c[2]; + PXA2xxMMCIState *mmc; + PXA2xxPCMCIAState *pcmcia[2]; + PXA2xxI2SState *i2s; + PXA2xxFIrState *fir; + PXA2xxKeyPadState *kp; + + /* Power management */ + hwaddr pm_base; + uint32_t pm_regs[0x40]; + + /* Clock management */ + hwaddr cm_base; + uint32_t cm_regs[4]; + uint32_t clkcfg; + + /* Memory management */ + hwaddr mm_base; + uint32_t mm_regs[0x1a]; + + /* Performance monitoring */ + uint32_t pmnc; +} PXA2xxState; + +struct PXA2xxI2SState { + MemoryRegion iomem; + qemu_irq irq; + qemu_irq rx_dma; + qemu_irq tx_dma; + void (*data_req)(void *, int, int); + + uint32_t control[2]; + uint32_t status; + uint32_t mask; + uint32_t clk; + + int enable; + int rx_len; + int tx_len; + void (*codec_out)(void *, uint32_t); + uint32_t (*codec_in)(void *); + void *opaque; + + int fifo_len; + uint32_t fifo[16]; +}; + +# define PA_FMT "0x%08lx" +# define REG_FMT "0x" TARGET_FMT_plx + +PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, + const char *revision); +PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); + +#endif /* PXA_H */ diff --git a/include/hw/arm/sharpsl.h b/include/hw/arm/sharpsl.h new file mode 100644 index 0000000..13981a6 --- /dev/null +++ b/include/hw/arm/sharpsl.h @@ -0,0 +1,17 @@ +/* + * Common declarations for the Zaurii. + * + * This file is licensed under the GNU GPL. + */ +#ifndef QEMU_SHARPSL_H +#define QEMU_SHARPSL_H + +#define zaurus_printf(format, ...) \ + fprintf(stderr, "%s: " format, __FUNCTION__, ##__VA_ARGS__) + +/* zaurus.c */ + +#define SL_PXA_PARAM_BASE 0xa0000a00 +void sl_bootparam_write(hwaddr ptr); + +#endif diff --git a/include/hw/arm/soc_dma.h b/include/hw/arm/soc_dma.h new file mode 100644 index 0000000..7379731 --- /dev/null +++ b/include/hw/arm/soc_dma.h @@ -0,0 +1,116 @@ +/* + * On-chip DMA controller framework. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski <andrew@openedhand.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_SOC_DMA_H +#define HW_SOC_DMA_H 1 + + +#include "exec/memory.h" +#include "hw/irq.h" + +struct soc_dma_s; +struct soc_dma_ch_s; +typedef void (*soc_dma_io_t)(void *opaque, uint8_t *buf, int len); +typedef void (*soc_dma_transfer_t)(struct soc_dma_ch_s *ch); + +enum soc_dma_port_type { + soc_dma_port_mem, + soc_dma_port_fifo, + soc_dma_port_other, +}; + +enum soc_dma_access_type { + soc_dma_access_const, + soc_dma_access_linear, + soc_dma_access_other, +}; + +struct soc_dma_ch_s { + /* Private */ + struct soc_dma_s *dma; + int num; + QEMUTimer *timer; + + /* Set by soc_dma.c */ + int enable; + int update; + + /* This should be set by dma->setup_fn(). */ + int bytes; + /* Initialised by the DMA module, call soc_dma_ch_update after writing. */ + enum soc_dma_access_type type[2]; + hwaddr vaddr[2]; /* Updated by .transfer_fn(). */ + /* Private */ + void *paddr[2]; + soc_dma_io_t io_fn[2]; + void *io_opaque[2]; + + int running; + soc_dma_transfer_t transfer_fn; + + /* Set and used by the DMA module. */ + void *opaque; +}; + +struct soc_dma_s { + /* Following fields are set by the SoC DMA module and can be used + * by anybody. */ + uint64_t drqbmp; /* Is zeroed by soc_dma_reset() */ + qemu_irq *drq; + void *opaque; + int64_t freq; + soc_dma_transfer_t transfer_fn; + soc_dma_transfer_t setup_fn; + /* Set by soc_dma_init() for use by the DMA module. */ + struct soc_dma_ch_s *ch; +}; + +/* Call to activate or stop a DMA channel. */ +void soc_dma_set_request(struct soc_dma_ch_s *ch, int level); +/* Call after every write to one of the following fields and before + * calling soc_dma_set_request(ch, 1): + * ch->type[0...1], + * ch->vaddr[0...1], + * ch->paddr[0...1], + * or after a soc_dma_port_add_fifo() or soc_dma_port_add_mem(). */ +void soc_dma_ch_update(struct soc_dma_ch_s *ch); + +/* The SoC should call this when the DMA module is being reset. */ +void soc_dma_reset(struct soc_dma_s *s); +struct soc_dma_s *soc_dma_init(int n); + +void soc_dma_port_add_fifo(struct soc_dma_s *dma, hwaddr virt_base, + soc_dma_io_t fn, void *opaque, int out); +void soc_dma_port_add_mem(struct soc_dma_s *dma, uint8_t *phys_base, + hwaddr virt_base, size_t size); + +static inline void soc_dma_port_add_fifo_in(struct soc_dma_s *dma, + hwaddr virt_base, soc_dma_io_t fn, void *opaque) +{ + return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 0); +} + +static inline void soc_dma_port_add_fifo_out(struct soc_dma_s *dma, + hwaddr virt_base, soc_dma_io_t fn, void *opaque) +{ + return soc_dma_port_add_fifo(dma, virt_base, fn, opaque, 1); +} + +#endif |