diff options
Diffstat (limited to 'hw')
-rw-r--r-- | hw/virtio-pci.c | 152 |
1 files changed, 112 insertions, 40 deletions
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index cc23048..f4bc152 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -18,6 +18,7 @@ #include "virtio.h" #include "pci.h" //#include "sysemu.h" +#include "msix.h" /* from Linux's linux/virtio_pci.h */ @@ -47,7 +48,24 @@ * a read-and-acknowledge. */ #define VIRTIO_PCI_ISR 19 -#define VIRTIO_PCI_CONFIG 20 +/* MSI-X registers: only enabled if MSI-X is enabled. */ +/* A 16-bit vector for configuration changes. */ +#define VIRTIO_MSI_CONFIG_VECTOR 20 +/* A 16-bit vector for selected queue notifications. */ +#define VIRTIO_MSI_QUEUE_VECTOR 22 + +/* Config space size */ +#define VIRTIO_PCI_CONFIG_NOMSI 20 +#define VIRTIO_PCI_CONFIG_MSI 24 +#define VIRTIO_PCI_REGION_SIZE(dev) (msix_present(dev) ? \ + VIRTIO_PCI_CONFIG_MSI : \ + VIRTIO_PCI_CONFIG_NOMSI) + +/* The remaining space is defined by each driver as the per-driver + * configuration space */ +#define VIRTIO_PCI_CONFIG(dev) (msix_enabled(dev) ? \ + VIRTIO_PCI_CONFIG_MSI : \ + VIRTIO_PCI_CONFIG_NOMSI) /* Virtio ABI version, if we increment this, we break the guest driver. */ #define VIRTIO_PCI_ABI_VERSION 0 @@ -81,14 +99,17 @@ typedef struct { static void virtio_pci_notify(void *opaque, uint16_t vector) { VirtIOPCIProxy *proxy = opaque; - - qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1); + if (msix_enabled(&proxy->pci_dev)) + msix_notify(&proxy->pci_dev, vector); + else + qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1); } static void virtio_pci_reset(void *opaque) { VirtIOPCIProxy *proxy = opaque; virtio_reset(proxy->vdev); + msix_reset(&proxy->pci_dev); } static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val) @@ -97,8 +118,6 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val) VirtIODevice *vdev = proxy->vdev; target_phys_addr_t pa; - addr -= proxy->addr; - switch (addr) { case VIRTIO_PCI_GUEST_FEATURES: /* Guest does not negotiate properly? We have to assume nothing. */ @@ -131,17 +150,33 @@ static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val) if (vdev->status == 0) virtio_pci_reset(proxy); break; + case VIRTIO_MSI_CONFIG_VECTOR: + msix_vector_unuse(&proxy->pci_dev, vdev->config_vector); + /* Make it possible for guest to discover an error took place. */ + if (msix_vector_use(&proxy->pci_dev, val) < 0) + val = VIRTIO_NO_VECTOR; + vdev->config_vector = val; + break; + case VIRTIO_MSI_QUEUE_VECTOR: + msix_vector_unuse(&proxy->pci_dev, + virtio_queue_vector(vdev, vdev->queue_sel)); + /* Make it possible for guest to discover an error took place. */ + if (msix_vector_use(&proxy->pci_dev, val) < 0) + val = VIRTIO_NO_VECTOR; + virtio_queue_set_vector(vdev, vdev->queue_sel, val); + break; + default: + fprintf(stderr, "%s: unexpected address 0x%x value 0x%x\n", + __func__, addr, val); + break; } } -static uint32_t virtio_ioport_read(void *opaque, uint32_t addr) +static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr) { - VirtIOPCIProxy *proxy = opaque; VirtIODevice *vdev = proxy->vdev; uint32_t ret = 0xFFFFFFFF; - addr -= proxy->addr; - switch (addr) { case VIRTIO_PCI_HOST_FEATURES: ret = vdev->get_features(vdev); @@ -171,6 +206,12 @@ static uint32_t virtio_ioport_read(void *opaque, uint32_t addr) vdev->isr = 0; qemu_set_irq(proxy->pci_dev.irq[0], 0); break; + case VIRTIO_MSI_CONFIG_VECTOR: + ret = vdev->config_vector; + break; + case VIRTIO_MSI_QUEUE_VECTOR: + ret = virtio_queue_vector(vdev, vdev->queue_sel); + break; default: break; } @@ -181,42 +222,72 @@ static uint32_t virtio_ioport_read(void *opaque, uint32_t addr) static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) + return virtio_ioport_read(proxy, addr); + addr -= config; return virtio_config_readb(proxy->vdev, addr); } static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) + return virtio_ioport_read(proxy, addr); + addr -= config; return virtio_config_readw(proxy->vdev, addr); } static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) + return virtio_ioport_read(proxy, addr); + addr -= config; return virtio_config_readl(proxy->vdev, addr); } static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) { + virtio_ioport_write(proxy, addr, val); + return; + } + addr -= config; virtio_config_writeb(proxy->vdev, addr, val); } static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) { + virtio_ioport_write(proxy, addr, val); + return; + } + addr -= config; virtio_config_writew(proxy->vdev, addr, val); } static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val) { VirtIOPCIProxy *proxy = opaque; - addr -= proxy->addr + VIRTIO_PCI_CONFIG; + uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); + addr -= proxy->addr; + if (addr < config) { + virtio_ioport_write(proxy, addr, val); + return; + } + addr -= config; virtio_config_writel(proxy->vdev, addr, val); } @@ -225,32 +296,26 @@ static void virtio_map(PCIDevice *pci_dev, int region_num, { VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev); VirtIODevice *vdev = proxy->vdev; - int i; + unsigned config_len = VIRTIO_PCI_REGION_SIZE(pci_dev) + vdev->config_len; proxy->addr = addr; - for (i = 0; i < 3; i++) { - register_ioport_write(addr, VIRTIO_PCI_CONFIG, 1 << i, - virtio_ioport_write, proxy); - register_ioport_read(addr, VIRTIO_PCI_CONFIG, 1 << i, - virtio_ioport_read, proxy); - } - if (vdev->config_len) { - register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 1, - virtio_pci_config_writeb, proxy); - register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 2, - virtio_pci_config_writew, proxy); - register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 4, - virtio_pci_config_writel, proxy); - register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 1, - virtio_pci_config_readb, proxy); - register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 2, - virtio_pci_config_readw, proxy); - register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 4, - virtio_pci_config_readl, proxy); + register_ioport_write(addr, config_len, 1, virtio_pci_config_writeb, proxy); + register_ioport_write(addr, config_len, 2, virtio_pci_config_writew, proxy); + register_ioport_write(addr, config_len, 4, virtio_pci_config_writel, proxy); + register_ioport_read(addr, config_len, 1, virtio_pci_config_readb, proxy); + register_ioport_read(addr, config_len, 2, virtio_pci_config_readw, proxy); + register_ioport_read(addr, config_len, 4, virtio_pci_config_readl, proxy); + if (vdev->config_len) vdev->get_config(vdev, vdev->config); - } +} + +static void virtio_write_config(PCIDevice *pci_dev, uint32_t address, + uint32_t val, int len) +{ + pci_default_write_config(pci_dev, address, val, len); + msix_write_config(pci_dev, address, val, len); } static const VirtIOBindings virtio_pci_bindings = { @@ -266,9 +331,6 @@ static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev, proxy->vdev = vdev; - /* No support for multiple vectors yet. */ - proxy->vdev->nvectors = 0; - config = proxy->pci_dev.config; pci_config_set_vendor_id(config, vendor); pci_config_set_device_id(config, device); @@ -286,7 +348,17 @@ static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev, config[0x3d] = 1; - size = 20 + vdev->config_len; + if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) { + pci_register_bar(&proxy->pci_dev, 1, + msix_bar_size(&proxy->pci_dev), + PCI_ADDRESS_SPACE_MEM, + msix_mmio_map); + proxy->pci_dev.config_write = virtio_write_config; + proxy->pci_dev.unregister = msix_uninit; + } else + vdev->nvectors = 0; + + size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) + vdev->config_len; if (size & (size-1)) size = 1 << qemu_fls(size); |