diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/arm/raspi.c | 41 |
1 files changed, 40 insertions, 1 deletions
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index ae15997..06f1e08 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -27,6 +27,7 @@ #define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */ #define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */ #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */ +#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */ /* Table of Linux board IDs for different Pi versions */ static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44}; @@ -63,6 +64,40 @@ static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info) info->smp_loader_start); } +static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info) +{ + /* Unlike the AArch32 version we don't need to call the board setup hook. + * The mechanism for doing the spin-table is also entirely different. + * We must have four 64-bit fields at absolute addresses + * 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for + * our CPUs, and which we must ensure are zero initialized before + * the primary CPU goes into the kernel. We put these variables inside + * a rom blob, so that the reset for ROM contents zeroes them for us. + */ + static const uint32_t smpboot[] = { + 0xd2801b05, /* mov x5, 0xd8 */ + 0xd53800a6, /* mrs x6, mpidr_el1 */ + 0x924004c6, /* and x6, x6, #0x3 */ + 0xd503205f, /* spin: wfe */ + 0xf86678a4, /* ldr x4, [x5,x6,lsl #3] */ + 0xb4ffffc4, /* cbz x4, spin */ + 0xd2800000, /* mov x0, #0x0 */ + 0xd2800001, /* mov x1, #0x0 */ + 0xd2800002, /* mov x2, #0x0 */ + 0xd2800003, /* mov x3, #0x0 */ + 0xd61f0080, /* br x4 */ + }; + + static const uint64_t spintables[] = { + 0, 0, 0, 0 + }; + + rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot), + info->smp_loader_start); + rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables), + SPINTABLE_ADDR); +} + static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info) { arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR); @@ -99,7 +134,11 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) /* Pi2 and Pi3 requires SMP setup */ if (version >= 2) { binfo.smp_loader_start = SMPBOOT_ADDR; - binfo.write_secondary_boot = write_smpboot; + if (version == 2) { + binfo.write_secondary_boot = write_smpboot; + } else { + binfo.write_secondary_boot = write_smpboot64; + } binfo.secondary_cpu_reset_hook = reset_secondary; } |