diff options
Diffstat (limited to 'hw/sd/ssi-sd.c')
| -rw-r--r-- | hw/sd/ssi-sd.c | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c new file mode 100644 index 0000000..4d3c4f6 --- /dev/null +++ b/hw/sd/ssi-sd.c @@ -0,0 +1,274 @@ +/* + * SSI to SD card adapter. + * + * Copyright (c) 2007-2009 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "sysemu/blockdev.h" +#include "hw/ssi.h" +#include "hw/sd.h" + +//#define DEBUG_SSI_SD 1 + +#ifdef DEBUG_SSI_SD +#define DPRINTF(fmt, ...) \ +do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) +#else +#define DPRINTF(fmt, ...) do {} while(0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0) +#endif + +typedef enum { + SSI_SD_CMD, + SSI_SD_CMDARG, + SSI_SD_RESPONSE, + SSI_SD_DATA_START, + SSI_SD_DATA_READ, +} ssi_sd_mode; + +typedef struct { + SSISlave ssidev; + ssi_sd_mode mode; + int cmd; + uint8_t cmdarg[4]; + uint8_t response[5]; + int arglen; + int response_pos; + int stopping; + SDState *sd; +} ssi_sd_state; + +/* State word bits. */ +#define SSI_SDR_LOCKED 0x0001 +#define SSI_SDR_WP_ERASE 0x0002 +#define SSI_SDR_ERROR 0x0004 +#define SSI_SDR_CC_ERROR 0x0008 +#define SSI_SDR_ECC_FAILED 0x0010 +#define SSI_SDR_WP_VIOLATION 0x0020 +#define SSI_SDR_ERASE_PARAM 0x0040 +#define SSI_SDR_OUT_OF_RANGE 0x0080 +#define SSI_SDR_IDLE 0x0100 +#define SSI_SDR_ERASE_RESET 0x0200 +#define SSI_SDR_ILLEGAL_COMMAND 0x0400 +#define SSI_SDR_COM_CRC_ERROR 0x0800 +#define SSI_SDR_ERASE_SEQ_ERROR 0x1000 +#define SSI_SDR_ADDRESS_ERROR 0x2000 +#define SSI_SDR_PARAMETER_ERROR 0x4000 + +static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) +{ + ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); + + /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ + if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { + s->mode = SSI_SD_CMD; + /* There must be at least one byte delay before the card responds. */ + s->stopping = 1; + } + + switch (s->mode) { + case SSI_SD_CMD: + if (val == 0xff) { + DPRINTF("NULL command\n"); + return 0xff; + } + s->cmd = val & 0x3f; + s->mode = SSI_SD_CMDARG; + s->arglen = 0; + return 0xff; + case SSI_SD_CMDARG: + if (s->arglen == 4) { + SDRequest request; + uint8_t longresp[16]; + /* FIXME: Check CRC. */ + request.cmd = s->cmd; + request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16) + | (s->cmdarg[2] << 8) | s->cmdarg[3]; + DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg); + s->arglen = sd_do_command(s->sd, &request, longresp); + if (s->arglen <= 0) { + s->arglen = 1; + s->response[0] = 4; + DPRINTF("SD command failed\n"); + } else if (s->cmd == 58) { + /* CMD58 returns R3 response (OCR) */ + DPRINTF("Returned OCR\n"); + s->arglen = 5; + s->response[0] = 1; + memcpy(&s->response[1], longresp, 4); + } else if (s->arglen != 4) { + BADF("Unexpected response to cmd %d\n", s->cmd); + /* Illegal command is about as near as we can get. */ + s->arglen = 1; + s->response[0] = 4; + } else { + /* All other commands return status. */ + uint32_t cardstatus; + uint16_t status; + /* CMD13 returns a 2-byte statuse work. Other commands + only return the first byte. */ + s->arglen = (s->cmd == 13) ? 2 : 1; + cardstatus = (longresp[0] << 24) | (longresp[1] << 16) + | (longresp[2] << 8) | longresp[3]; + status = 0; + if (((cardstatus >> 9) & 0xf) < 4) + status |= SSI_SDR_IDLE; + if (cardstatus & ERASE_RESET) + status |= SSI_SDR_ERASE_RESET; + if (cardstatus & ILLEGAL_COMMAND) + status |= SSI_SDR_ILLEGAL_COMMAND; + if (cardstatus & COM_CRC_ERROR) + status |= SSI_SDR_COM_CRC_ERROR; + if (cardstatus & ERASE_SEQ_ERROR) + status |= SSI_SDR_ERASE_SEQ_ERROR; + if (cardstatus & ADDRESS_ERROR) + status |= SSI_SDR_ADDRESS_ERROR; + if (cardstatus & CARD_IS_LOCKED) + status |= SSI_SDR_LOCKED; + if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP)) + status |= SSI_SDR_WP_ERASE; + if (cardstatus & SD_ERROR) + status |= SSI_SDR_ERROR; + if (cardstatus & CC_ERROR) + status |= SSI_SDR_CC_ERROR; + if (cardstatus & CARD_ECC_FAILED) + status |= SSI_SDR_ECC_FAILED; + if (cardstatus & WP_VIOLATION) + status |= SSI_SDR_WP_VIOLATION; + if (cardstatus & ERASE_PARAM) + status |= SSI_SDR_ERASE_PARAM; + if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE)) + status |= SSI_SDR_OUT_OF_RANGE; + /* ??? Don't know what Parameter Error really means, so + assume it's set if the second byte is nonzero. */ + if (status & 0xff) + status |= SSI_SDR_PARAMETER_ERROR; + s->response[0] = status >> 8; + s->response[1] = status; + DPRINTF("Card status 0x%02x\n", status); + } + s->mode = SSI_SD_RESPONSE; + s->response_pos = 0; + } else { + s->cmdarg[s->arglen++] = val; + } + return 0xff; + case SSI_SD_RESPONSE: + if (s->stopping) { + s->stopping = 0; + return 0xff; + } + if (s->response_pos < s->arglen) { + DPRINTF("Response 0x%02x\n", s->response[s->response_pos]); + return s->response[s->response_pos++]; + } + if (sd_data_ready(s->sd)) { + DPRINTF("Data read\n"); + s->mode = SSI_SD_DATA_START; + } else { + DPRINTF("End of command\n"); + s->mode = SSI_SD_CMD; + } + return 0xff; + case SSI_SD_DATA_START: + DPRINTF("Start read block\n"); + s->mode = SSI_SD_DATA_READ; + return 0xfe; + case SSI_SD_DATA_READ: + val = sd_read_data(s->sd); + if (!sd_data_ready(s->sd)) { + DPRINTF("Data read end\n"); + s->mode = SSI_SD_CMD; + } + return val; + } + /* Should never happen. */ + return 0xff; +} + +static void ssi_sd_save(QEMUFile *f, void *opaque) +{ + SSISlave *ss = SSI_SLAVE(opaque); + ssi_sd_state *s = (ssi_sd_state *)opaque; + int i; + + qemu_put_be32(f, s->mode); + qemu_put_be32(f, s->cmd); + for (i = 0; i < 4; i++) + qemu_put_be32(f, s->cmdarg[i]); + for (i = 0; i < 5; i++) + qemu_put_be32(f, s->response[i]); + qemu_put_be32(f, s->arglen); + qemu_put_be32(f, s->response_pos); + qemu_put_be32(f, s->stopping); + + qemu_put_be32(f, ss->cs); +} + +static int ssi_sd_load(QEMUFile *f, void *opaque, int version_id) +{ + SSISlave *ss = SSI_SLAVE(opaque); + ssi_sd_state *s = (ssi_sd_state *)opaque; + int i; + + if (version_id != 1) + return -EINVAL; + + s->mode = qemu_get_be32(f); + s->cmd = qemu_get_be32(f); + for (i = 0; i < 4; i++) + s->cmdarg[i] = qemu_get_be32(f); + for (i = 0; i < 5; i++) + s->response[i] = qemu_get_be32(f); + s->arglen = qemu_get_be32(f); + s->response_pos = qemu_get_be32(f); + s->stopping = qemu_get_be32(f); + + ss->cs = qemu_get_be32(f); + + return 0; +} + +static int ssi_sd_init(SSISlave *dev) +{ + ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); + DriveInfo *dinfo; + + s->mode = SSI_SD_CMD; + dinfo = drive_get_next(IF_SD); + s->sd = sd_init(dinfo ? dinfo->bdrv : NULL, 1); + register_savevm(&dev->qdev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s); + return 0; +} + +static void ssi_sd_class_init(ObjectClass *klass, void *data) +{ + SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + + k->init = ssi_sd_init; + k->transfer = ssi_sd_transfer; + k->cs_polarity = SSI_CS_LOW; +} + +static const TypeInfo ssi_sd_info = { + .name = "ssi-sd", + .parent = TYPE_SSI_SLAVE, + .instance_size = sizeof(ssi_sd_state), + .class_init = ssi_sd_class_init, +}; + +static void ssi_sd_register_types(void) +{ + type_register_static(&ssi_sd_info); +} + +type_init(ssi_sd_register_types) |