diff options
Diffstat (limited to 'hw/riscv')
| -rw-r--r-- | hw/riscv/virt.c | 191 |
1 files changed, 101 insertions, 90 deletions
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index 643fee2..f849052 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -1162,6 +1162,100 @@ static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, int aia_guests, return aplic_m; } +static void virt_machine_done(Notifier *notifier, void *data) +{ + RISCVVirtState *s = container_of(notifier, RISCVVirtState, + machine_done); + const MemMapEntry *memmap = virt_memmap; + MachineState *machine = MACHINE(s); + target_ulong start_addr = memmap[VIRT_DRAM].base; + target_ulong firmware_end_addr, kernel_start_addr; + uint32_t fdt_load_addr; + uint64_t kernel_entry; + + /* + * Only direct boot kernel is currently supported for KVM VM, + * so the "-bios" parameter is not supported when KVM is enabled. + */ + if (kvm_enabled()) { + if (machine->firmware) { + if (strcmp(machine->firmware, "none")) { + error_report("Machine mode firmware is not supported in " + "combination with KVM."); + exit(1); + } + } else { + machine->firmware = g_strdup("none"); + } + } + + if (riscv_is_32bit(&s->soc[0])) { + firmware_end_addr = riscv_find_and_load_firmware(machine, + RISCV32_BIOS_BIN, start_addr, NULL); + } else { + firmware_end_addr = riscv_find_and_load_firmware(machine, + RISCV64_BIOS_BIN, start_addr, NULL); + } + + if (machine->kernel_filename) { + kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], + firmware_end_addr); + + kernel_entry = riscv_load_kernel(machine->kernel_filename, + kernel_start_addr, NULL); + + if (machine->initrd_filename) { + hwaddr start; + hwaddr end = riscv_load_initrd(machine->initrd_filename, + machine->ram_size, kernel_entry, + &start); + qemu_fdt_setprop_cell(machine->fdt, "/chosen", + "linux,initrd-start", start); + qemu_fdt_setprop_cell(machine->fdt, "/chosen", "linux,initrd-end", + end); + } + } else { + /* + * If dynamic firmware is used, it doesn't know where is the next mode + * if kernel argument is not set. + */ + kernel_entry = 0; + } + + if (drive_get(IF_PFLASH, 0, 0)) { + /* + * Pflash was supplied, let's overwrite the address we jump to after + * reset to the base of the flash. + */ + start_addr = virt_memmap[VIRT_FLASH].base; + } + + /* + * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device + * tree cannot be altered and we get FDT_ERR_NOSPACE. + */ + s->fw_cfg = create_fw_cfg(machine); + rom_set_fw(s->fw_cfg); + + /* Compute the fdt load address in dram */ + fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base, + machine->ram_size, machine->fdt); + /* load the reset vector */ + riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr, + virt_memmap[VIRT_MROM].base, + virt_memmap[VIRT_MROM].size, kernel_entry, + fdt_load_addr, machine->fdt); + + /* + * Only direct boot kernel is currently supported for KVM VM, + * So here setup kernel start address and fdt address. + * TODO:Support firmware loading and integrate to TCG start + */ + if (kvm_enabled()) { + riscv_setup_direct_kernel(kernel_entry, fdt_load_addr); + } +} + static void virt_machine_init(MachineState *machine) { const MemMapEntry *memmap = virt_memmap; @@ -1169,10 +1263,6 @@ static void virt_machine_init(MachineState *machine) MemoryRegion *system_memory = get_system_memory(); MemoryRegion *mask_rom = g_new(MemoryRegion, 1); char *soc_name; - target_ulong start_addr = memmap[VIRT_DRAM].base; - target_ulong firmware_end_addr, kernel_start_addr; - uint32_t fdt_load_addr; - uint64_t kernel_entry; DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip; int i, base_hartid, hart_count; @@ -1302,98 +1392,12 @@ static void virt_machine_init(MachineState *machine) memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, machine->ram); - /* create device tree */ - create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, - riscv_is_32bit(&s->soc[0])); - /* boot rom */ memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom", memmap[VIRT_MROM].size, &error_fatal); memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base, mask_rom); - /* - * Only direct boot kernel is currently supported for KVM VM, - * so the "-bios" parameter is not supported when KVM is enabled. - */ - if (kvm_enabled()) { - if (machine->firmware) { - if (strcmp(machine->firmware, "none")) { - error_report("Machine mode firmware is not supported in " - "combination with KVM."); - exit(1); - } - } else { - machine->firmware = g_strdup("none"); - } - } - - if (riscv_is_32bit(&s->soc[0])) { - firmware_end_addr = riscv_find_and_load_firmware(machine, - RISCV32_BIOS_BIN, start_addr, NULL); - } else { - firmware_end_addr = riscv_find_and_load_firmware(machine, - RISCV64_BIOS_BIN, start_addr, NULL); - } - - if (machine->kernel_filename) { - kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], - firmware_end_addr); - - kernel_entry = riscv_load_kernel(machine->kernel_filename, - kernel_start_addr, NULL); - - if (machine->initrd_filename) { - hwaddr start; - hwaddr end = riscv_load_initrd(machine->initrd_filename, - machine->ram_size, kernel_entry, - &start); - qemu_fdt_setprop_cell(machine->fdt, "/chosen", - "linux,initrd-start", start); - qemu_fdt_setprop_cell(machine->fdt, "/chosen", "linux,initrd-end", - end); - } - } else { - /* - * If dynamic firmware is used, it doesn't know where is the next mode - * if kernel argument is not set. - */ - kernel_entry = 0; - } - - if (drive_get(IF_PFLASH, 0, 0)) { - /* - * Pflash was supplied, let's overwrite the address we jump to after - * reset to the base of the flash. - */ - start_addr = virt_memmap[VIRT_FLASH].base; - } - - /* - * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device - * tree cannot be altered and we get FDT_ERR_NOSPACE. - */ - s->fw_cfg = create_fw_cfg(machine); - rom_set_fw(s->fw_cfg); - - /* Compute the fdt load address in dram */ - fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base, - machine->ram_size, machine->fdt); - /* load the reset vector */ - riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr, - virt_memmap[VIRT_MROM].base, - virt_memmap[VIRT_MROM].size, kernel_entry, - fdt_load_addr, machine->fdt); - - /* - * Only direct boot kernel is currently supported for KVM VM, - * So here setup kernel start address and fdt address. - * TODO:Support firmware loading and integrate to TCG start - */ - if (kvm_enabled()) { - riscv_setup_direct_kernel(kernel_entry, fdt_load_addr); - } - /* SiFive Test MMIO device */ sifive_test_create(memmap[VIRT_TEST].base); @@ -1429,6 +1433,13 @@ static void virt_machine_init(MachineState *machine) drive_get(IF_PFLASH, 0, i)); } virt_flash_map(s, system_memory); + + /* create device tree */ + create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, + riscv_is_32bit(&s->soc[0])); + + s->machine_done.notify = virt_machine_done; + qemu_add_machine_init_done_notifier(&s->machine_done); } static void virt_machine_instance_init(Object *obj) |