diff options
Diffstat (limited to 'hw/nseries.c')
| -rw-r--r-- | hw/nseries.c | 43 |
1 files changed, 21 insertions, 22 deletions
diff --git a/hw/nseries.c b/hw/nseries.c index 2f84f53..d9a5428 100644 --- a/hw/nseries.c +++ b/hw/nseries.c @@ -134,9 +134,9 @@ static void n800_mmc_cs_cb(void *opaque, int line, int level) static void n8x0_gpio_setup(struct n800_s *s) { qemu_irq *mmc_cs = qemu_allocate_irqs(n800_mmc_cs_cb, s->cpu->mmc, 1); - omap2_gpio_out_set(s->cpu->gpif, N8X0_MMC_CS_GPIO, mmc_cs[0]); + qdev_connect_gpio_out(s->cpu->gpio, N8X0_MMC_CS_GPIO, mmc_cs[0]); - qemu_irq_lower(omap2_gpio_in_get(s->cpu->gpif, N800_BAT_COVER_GPIO)[0]); + qemu_irq_lower(qdev_get_gpio_in(s->cpu->gpio, N800_BAT_COVER_GPIO)); } #define MAEMO_CAL_HEADER(...) \ @@ -168,8 +168,8 @@ static void n8x0_nand_setup(struct n800_s *s) omap_gpmc_attach(s->cpu->gpmc, N8X0_ONENAND_CS, 0, onenand_base_update, onenand_base_unmap, (s->nand = onenand_init(0xec4800, 1, - omap2_gpio_in_get(s->cpu->gpif, - N8X0_ONENAND_GPIO)[0]))); + qdev_get_gpio_in(s->cpu->gpio, + N8X0_ONENAND_GPIO)))); otp_region = onenand_raw_otp(s->nand); memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac)); @@ -180,7 +180,7 @@ static void n8x0_nand_setup(struct n800_s *s) static void n8x0_i2c_setup(struct n800_s *s) { DeviceState *dev; - qemu_irq tmp_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_TMP105_GPIO)[0]; + qemu_irq tmp_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TMP105_GPIO); /* Attach the CPU on one end of our I2C bus. */ s->i2c = omap_i2c_bus(s->cpu->i2c[0]); @@ -249,8 +249,8 @@ static void n800_tsc_kbd_setup(struct n800_s *s) /* XXX: are the three pins inverted inside the chip between the * tsc and the cpu (N4111)? */ qemu_irq penirq = NULL; /* NC */ - qemu_irq kbirq = omap2_gpio_in_get(s->cpu->gpif, N800_TSC_KP_IRQ_GPIO)[0]; - qemu_irq dav = omap2_gpio_in_get(s->cpu->gpif, N800_TSC_TS_GPIO)[0]; + qemu_irq kbirq = qdev_get_gpio_in(s->cpu->gpio, N800_TSC_KP_IRQ_GPIO); + qemu_irq dav = qdev_get_gpio_in(s->cpu->gpio, N800_TSC_TS_GPIO); s->ts.chip = tsc2301_init(penirq, kbirq, dav); s->ts.opaque = s->ts.chip->opaque; @@ -269,7 +269,7 @@ static void n800_tsc_kbd_setup(struct n800_s *s) static void n810_tsc_setup(struct n800_s *s) { - qemu_irq pintdav = omap2_gpio_in_get(s->cpu->gpif, N810_TSC_TS_GPIO)[0]; + qemu_irq pintdav = qdev_get_gpio_in(s->cpu->gpio, N810_TSC_TS_GPIO); s->ts.opaque = tsc2005_init(pintdav); s->ts.txrx = tsc2005_txrx; @@ -361,7 +361,7 @@ static int n810_keys[0x80] = { static void n810_kbd_setup(struct n800_s *s) { - qemu_irq kbd_irq = omap2_gpio_in_get(s->cpu->gpif, N810_KEYBOARD_GPIO)[0]; + qemu_irq kbd_irq = qdev_get_gpio_in(s->cpu->gpio, N810_KEYBOARD_GPIO); DeviceState *dev; int i; @@ -726,15 +726,15 @@ static void n8x0_dss_setup(struct n800_s *s) static void n8x0_cbus_setup(struct n800_s *s) { - qemu_irq dat_out = omap2_gpio_in_get(s->cpu->gpif, N8X0_CBUS_DAT_GPIO)[0]; - qemu_irq retu_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_RETU_GPIO)[0]; - qemu_irq tahvo_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_TAHVO_GPIO)[0]; + qemu_irq dat_out = qdev_get_gpio_in(s->cpu->gpio, N8X0_CBUS_DAT_GPIO); + qemu_irq retu_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_RETU_GPIO); + qemu_irq tahvo_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TAHVO_GPIO); CBus *cbus = cbus_init(dat_out); - omap2_gpio_out_set(s->cpu->gpif, N8X0_CBUS_CLK_GPIO, cbus->clk); - omap2_gpio_out_set(s->cpu->gpif, N8X0_CBUS_DAT_GPIO, cbus->dat); - omap2_gpio_out_set(s->cpu->gpif, N8X0_CBUS_SEL_GPIO, cbus->sel); + qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk); + qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat); + qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel); cbus_attach(cbus, s->retu = retu_init(retu_irq, 1)); cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1)); @@ -743,12 +743,11 @@ static void n8x0_cbus_setup(struct n800_s *s) static void n8x0_uart_setup(struct n800_s *s) { CharDriverState *radio = uart_hci_init( - omap2_gpio_in_get(s->cpu->gpif, - N8X0_BT_HOST_WKUP_GPIO)[0]); + qdev_get_gpio_in(s->cpu->gpio, N8X0_BT_HOST_WKUP_GPIO)); - omap2_gpio_out_set(s->cpu->gpif, N8X0_BT_RESET_GPIO, + qdev_connect_gpio_out(s->cpu->gpio, N8X0_BT_RESET_GPIO, csrhci_pins_get(radio)[csrhci_pin_reset]); - omap2_gpio_out_set(s->cpu->gpif, N8X0_BT_WKUP_GPIO, + qdev_connect_gpio_out(s->cpu->gpio, N8X0_BT_WKUP_GPIO, csrhci_pins_get(radio)[csrhci_pin_wakeup]); omap_uart_attach(s->cpu->uart[BT_UART], radio); @@ -763,7 +762,7 @@ static void n8x0_usb_power_cb(void *opaque, int line, int level) static void n8x0_usb_setup(struct n800_s *s) { - qemu_irq tusb_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_TUSB_INT_GPIO)[0]; + qemu_irq tusb_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TUSB_INT_GPIO); qemu_irq tusb_pwr = qemu_allocate_irqs(n8x0_usb_power_cb, s, 1)[0]; TUSBState *tusb = tusb6010_init(tusb_irq); @@ -774,7 +773,7 @@ static void n8x0_usb_setup(struct n800_s *s) tusb6010_sync_io(tusb), NULL, NULL, tusb); s->usb = tusb; - omap2_gpio_out_set(s->cpu->gpif, N8X0_TUSB_ENABLE_GPIO, tusb_pwr); + qdev_connect_gpio_out(s->cpu->gpio, N8X0_TUSB_ENABLE_GPIO, tusb_pwr); } /* Setup done before the main bootloader starts by some early setup code @@ -1020,7 +1019,7 @@ static void n8x0_boot_init(void *opaque) /* If the machine has a slided keyboard, open it */ if (s->kbd) - qemu_irq_raise(omap2_gpio_in_get(s->cpu->gpif, N810_SLIDE_GPIO)[0]); + qemu_irq_raise(qdev_get_gpio_in(s->cpu->gpio, N810_SLIDE_GPIO)); } #define OMAP_TAG_NOKIA_BT 0x4e01 |