aboutsummaryrefslogtreecommitdiff
path: root/hw/fdc.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/fdc.c')
-rw-r--r--hw/fdc.c96
1 files changed, 14 insertions, 82 deletions
diff --git a/hw/fdc.c b/hw/fdc.c
index e56d679..cf8527d 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -69,10 +69,6 @@ typedef enum fdrive_type_t {
FDRIVE_DRV_NONE = 0x03, /* No drive connected */
} fdrive_type_t;
-typedef enum fdrive_flags_t {
- FDRIVE_MOTOR_ON = 0x01, /* motor on/off */
-} fdrive_flags_t;
-
typedef enum fdisk_flags_t {
FDISK_DBL_SIDES = 0x01,
} fdisk_flags_t;
@@ -81,7 +77,6 @@ typedef struct fdrive_t {
BlockDriverState *bs;
/* Drive status */
fdrive_type_t drive;
- fdrive_flags_t drflags;
uint8_t perpendicular; /* 2.88 MB access mode */
/* Position */
uint8_t head;
@@ -103,7 +98,6 @@ static void fd_init (fdrive_t *drv, BlockDriverState *bs)
/* Drive */
drv->bs = bs;
drv->drive = FDRIVE_DRV_NONE;
- drv->drflags = 0;
drv->perpendicular = 0;
/* Disk */
drv->last_sect = 0;
@@ -296,24 +290,6 @@ static void fd_revalidate (fdrive_t *drv)
}
}
-/* Motor control */
-static void fd_start (fdrive_t *drv)
-{
- drv->drflags |= FDRIVE_MOTOR_ON;
-}
-
-static void fd_stop (fdrive_t *drv)
-{
- drv->drflags &= ~FDRIVE_MOTOR_ON;
-}
-
-/* Re-initialise a drives (motor off, repositioned) */
-static void fd_reset (fdrive_t *drv)
-{
- fd_stop(drv);
- fd_recalibrate(drv);
-}
-
/********************************************************/
/* Intel 82078 floppy disk controller emulation */
@@ -337,7 +313,6 @@ static uint32_t fdctrl_read_dir (fdctrl_t *fdctrl);
enum {
FD_CTRL_ACTIVE = 0x01, /* XXX: suppress that */
- FD_CTRL_RESET = 0x02,
FD_CTRL_SLEEP = 0x04, /* XXX: suppress that */
FD_CTRL_BUSY = 0x08, /* dma transfer in progress */
};
@@ -621,10 +596,6 @@ static CPUWriteMemoryFunc *fdctrl_mem_write_strict[3] = {
static void fd_save (QEMUFile *f, fdrive_t *fd)
{
- uint8_t tmp;
-
- tmp = fd->drflags;
- qemu_put_8s(f, &tmp);
qemu_put_8s(f, &fd->head);
qemu_put_8s(f, &fd->track);
qemu_put_8s(f, &fd->sect);
@@ -662,10 +633,6 @@ static void fdc_save (QEMUFile *f, void *opaque)
static int fd_load (QEMUFile *f, fdrive_t *fd)
{
- uint8_t tmp;
-
- qemu_get_8s(f, &tmp);
- fd->drflags = tmp;
qemu_get_8s(f, &fd->head);
qemu_get_8s(f, &fd->track);
qemu_get_8s(f, &fd->sect);
@@ -773,7 +740,7 @@ static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
if (!fdctrl->drives[1].bs)
fdctrl->sra |= FD_SRA_nDRV2;
fdctrl->cur_drv = 0;
- fdctrl->dor = 0;
+ fdctrl->dor = FD_DOR_nRESET;
fdctrl->dor |= (fdctrl->dma_chann != -1) ? FD_DOR_DMAEN : 0;
fdctrl->msr = 0;
/* FIFO state */
@@ -782,7 +749,7 @@ static void fdctrl_reset (fdctrl_t *fdctrl, int do_irq)
fdctrl->data_state = FD_STATE_CMD;
fdctrl->data_dir = FD_DIR_WRITE;
for (i = 0; i < MAX_FD; i++)
- fd_reset(&fdctrl->drives[i]);
+ fd_recalibrate(&fdctrl->drives[i]);
fdctrl_reset_fifo(fdctrl);
if (do_irq)
fdctrl_raise_irq(fdctrl, FD_SR0_RDYCHG);
@@ -826,19 +793,8 @@ static uint32_t fdctrl_read_statusB (fdctrl_t *fdctrl)
/* Digital output register : 0x02 */
static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl)
{
- uint32_t retval = 0;
+ uint32_t retval = fdctrl->dor;
- /* Drive motors state indicators */
- if (drv0(fdctrl)->drflags & FDRIVE_MOTOR_ON)
- retval |= FD_DOR_MOTEN0;
- if (drv1(fdctrl)->drflags & FDRIVE_MOTOR_ON)
- retval |= FD_DOR_MOTEN1;
- /* DMA enable */
- if (fdctrl->dor & FD_DOR_DMAEN)
- retval |= FD_DOR_DMAEN;
- /* Reset indicator */
- if (!(fdctrl->state & FD_CTRL_RESET))
- retval |= FD_DOR_nRESET;
/* Selected drive */
retval |= fdctrl->cur_drv;
FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval);
@@ -848,13 +804,6 @@ static uint32_t fdctrl_read_dor (fdctrl_t *fdctrl)
static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
{
- /* Reset mode */
- if (fdctrl->state & FD_CTRL_RESET) {
- if (!(value & FD_DOR_nRESET)) {
- FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
- return;
- }
- }
FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
/* Motors */
@@ -873,31 +822,16 @@ static void fdctrl_write_dor (fdctrl_t *fdctrl, uint32_t value)
else
fdctrl->srb &= ~FD_SRB_DR0;
- /* Drive motors state indicators */
- if (value & FD_DOR_MOTEN1)
- fd_start(drv1(fdctrl));
- else
- fd_stop(drv1(fdctrl));
- if (value & FD_DOR_MOTEN0)
- fd_start(drv0(fdctrl));
- else
- fd_stop(drv0(fdctrl));
- /* DMA enable */
-#if 0
- if (fdctrl->dma_chann != -1)
- fdctrl->dma_en = value & FD_DOR_DMAEN ? 1 : 0;
-#endif
/* Reset */
if (!(value & FD_DOR_nRESET)) {
- if (!(fdctrl->state & FD_CTRL_RESET)) {
+ if (fdctrl->dor & FD_DOR_nRESET) {
FLOPPY_DPRINTF("controller enter RESET state\n");
- fdctrl->state |= FD_CTRL_RESET;
}
} else {
- if (fdctrl->state & FD_CTRL_RESET) {
+ if (!(fdctrl->dor & FD_DOR_nRESET)) {
FLOPPY_DPRINTF("controller out of RESET state\n");
fdctrl_reset(fdctrl, 1);
- fdctrl->state &= ~(FD_CTRL_RESET | FD_CTRL_SLEEP);
+ fdctrl->state &= ~FD_CTRL_SLEEP;
}
}
/* Selected drive */
@@ -922,7 +856,7 @@ static uint32_t fdctrl_read_tape (fdctrl_t *fdctrl)
static void fdctrl_write_tape (fdctrl_t *fdctrl, uint32_t value)
{
/* Reset mode */
- if (fdctrl->state & FD_CTRL_RESET) {
+ if (!(fdctrl->dor & FD_DOR_nRESET)) {
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
@@ -937,7 +871,8 @@ static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
{
uint32_t retval = 0;
- fdctrl->state &= ~(FD_CTRL_SLEEP | FD_CTRL_RESET);
+ fdctrl->dor |= FD_DOR_nRESET;
+ fdctrl->state &= ~FD_CTRL_SLEEP;
if (!(fdctrl->state & FD_CTRL_BUSY)) {
/* Data transfer allowed */
retval |= FD_MSR_RQM;
@@ -959,16 +894,16 @@ static uint32_t fdctrl_read_main_status (fdctrl_t *fdctrl)
static void fdctrl_write_rate (fdctrl_t *fdctrl, uint32_t value)
{
/* Reset mode */
- if (fdctrl->state & FD_CTRL_RESET) {
+ if (!(fdctrl->dor & FD_DOR_nRESET)) {
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}
FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
/* Reset: autoclear */
if (value & FD_DSR_SWRESET) {
- fdctrl->state |= FD_CTRL_RESET;
+ fdctrl->dor &= ~FD_DOR_nRESET;
fdctrl_reset(fdctrl, 1);
- fdctrl->state &= ~FD_CTRL_RESET;
+ fdctrl->dor |= FD_DOR_nRESET;
}
if (value & FD_DSR_PWRDOWN) {
fdctrl->state |= FD_CTRL_SLEEP;
@@ -1618,7 +1553,6 @@ static void fdctrl_handle_seek (fdctrl_t *fdctrl, int direction)
fdctrl->cur_drv = fdctrl->fifo[1] & FD_DOR_SELMASK;
cur_drv = get_cur_drv(fdctrl);
- fd_start(cur_drv);
if (fdctrl->fifo[2] <= cur_drv->track)
cur_drv->dir = 1;
else
@@ -1640,7 +1574,7 @@ static void fdctrl_handle_perpendicular_mode (fdctrl_t *fdctrl, int direction)
if (fdctrl->fifo[1] & 0x80)
cur_drv->perpendicular = fdctrl->fifo[1] & 0x7;
/* No result back */
- fdctrl_reset_fifo(fdctrl);
+ fdctrl_reset_fifo(fdctrl);
}
static void fdctrl_handle_configure (fdctrl_t *fdctrl, int direction)
@@ -1692,7 +1626,6 @@ static void fdctrl_handle_relative_seek_out (fdctrl_t *fdctrl, int direction)
fdctrl->cur_drv = fdctrl->fifo[1] & FD_DOR_SELMASK;
cur_drv = get_cur_drv(fdctrl);
- fd_start(cur_drv);
cur_drv->dir = 0;
if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
cur_drv->track = cur_drv->max_track - 1;
@@ -1709,7 +1642,6 @@ static void fdctrl_handle_relative_seek_in (fdctrl_t *fdctrl, int direction)
fdctrl->cur_drv = fdctrl->fifo[1] & FD_DOR_SELMASK;
cur_drv = get_cur_drv(fdctrl);
- fd_start(cur_drv);
cur_drv->dir = 1;
if (fdctrl->fifo[2] > cur_drv->track) {
cur_drv->track = 0;
@@ -1772,7 +1704,7 @@ static void fdctrl_write_data (fdctrl_t *fdctrl, uint32_t value)
cur_drv = get_cur_drv(fdctrl);
/* Reset mode */
- if (fdctrl->state & FD_CTRL_RESET) {
+ if (!(fdctrl->dor & FD_DOR_nRESET)) {
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
return;
}