diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 116 |
1 files changed, 58 insertions, 58 deletions
@@ -2073,8 +2073,8 @@ fi for target in $target_list; do target_dir="$target" -config_mak=$target_dir/config.mak -config_h=$target_dir/config.h +config_target_mak=$target_dir/config-target.mak +config_target_h=$target_dir/config-target.h target_arch2=`echo $target | cut -d '-' -f 1` target_bigendian="no" case "$target_arch2" in @@ -2109,9 +2109,9 @@ case "$target" in ;; esac -#echo "Creating $config_mak, $config_h and $target_dir/Makefile" +#echo "Creating $config_target_mak, $config_target_h and $target_dir/Makefile" -test -f $config_h && mv $config_h ${config_h}~ +test -f $config_target_h && mv $config_target_h ${config_target_h}~ mkdir -p $target_dir mkdir -p $target_dir/fpu @@ -2128,13 +2128,13 @@ rm -f $target_dir/Makefile ln -s $source_path/Makefile.target $target_dir/Makefile -echo "# Automatically generated by configure - do not modify" > $config_mak +echo "# Automatically generated by configure - do not modify" > $config_target_mak bflt="no" elfload32="no" target_nptl="no" interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"` -echo "CONFIG_QEMU_PREFIX=\"$interp_prefix1\"" >> $config_mak +echo "CONFIG_QEMU_PREFIX=\"$interp_prefix1\"" >> $config_target_mak gdb_xml_files="" TARGET_ARCH="$target_arch2" @@ -2175,20 +2175,20 @@ case "$target_arch2" in ;; mips|mipsel) TARGET_ARCH=mips - echo "TARGET_ABI_MIPSO32=y" >> $config_mak + echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak target_nptl="yes" target_phys_bits=64 ;; mipsn32|mipsn32el) TARGET_ARCH=mipsn32 TARGET_BASE_ARCH=mips - echo "TARGET_ABI_MIPSN32=y" >> $config_mak + echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak target_phys_bits=64 ;; mips64|mips64el) TARGET_ARCH=mips64 TARGET_BASE_ARCH=mips - echo "TARGET_ABI_MIPSN64=y" >> $config_mak + echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak target_phys_bits=64 ;; ppc) @@ -2213,7 +2213,7 @@ case "$target_arch2" in TARGET_ARCH=ppc64 TARGET_BASE_ARCH=ppc TARGET_ABI_DIR=ppc - echo "TARGET_ABI32=y" >> $config_mak + echo "TARGET_ABI32=y" >> $config_target_mak gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" target_phys_bits=64 ;; @@ -2235,7 +2235,7 @@ case "$target_arch2" in TARGET_ARCH=sparc64 TARGET_BASE_ARCH=sparc TARGET_ABI_DIR=sparc - echo "TARGET_ABI32=y" >> $config_mak + echo "TARGET_ABI32=y" >> $config_target_mak target_phys_bits=64 ;; *) @@ -2243,26 +2243,26 @@ case "$target_arch2" in exit 1 ;; esac -echo "TARGET_ARCH=$TARGET_ARCH" >> $config_mak +echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak target_arch_name="`echo $TARGET_ARCH | tr '[:lower:]' '[:upper:]'`" -echo "TARGET_$target_arch_name=y" >> $config_mak -echo "TARGET_ARCH2=$target_arch2" >> $config_mak +echo "TARGET_$target_arch_name=y" >> $config_target_mak +echo "TARGET_ARCH2=$target_arch2" >> $config_target_mak # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH if [ "$TARGET_BASE_ARCH" = "" ]; then TARGET_BASE_ARCH=$TARGET_ARCH fi -echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_mak +echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak if [ "$TARGET_ABI_DIR" = "" ]; then TARGET_ABI_DIR=$TARGET_ARCH fi -echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_mak +echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak if [ $target_phys_bits -lt $hostlongbits ] ; then target_phys_bits=$hostlongbits fi case "$target_arch2" in i386|x86_64) if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then - echo "CONFIG_XEN=y" >> $config_mak + echo "CONFIG_XEN=y" >> $config_target_mak fi esac case "$target_arch2" in @@ -2274,28 +2274,28 @@ case "$target_arch2" in \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \ \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \ \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then - echo "CONFIG_KVM=y" >> $config_mak - echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak + echo "CONFIG_KVM=y" >> $config_target_mak + echo "KVM_CFLAGS=$kvm_cflags" >> $config_target_mak fi esac -echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_mak +echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_target_mak if test "$target_bigendian" = "yes" ; then - echo "TARGET_WORDS_BIGENDIAN=y" >> $config_mak + echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak fi if test "$target_softmmu" = "yes" ; then - echo "CONFIG_SOFTMMU=y" >> $config_mak - echo "LIBS+=$libs_softmmu" >> $config_mak - echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak + echo "CONFIG_SOFTMMU=y" >> $config_target_mak + echo "LIBS+=$libs_softmmu" >> $config_target_mak + echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_target_mak echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak fi if test "$target_user_only" = "yes" ; then - echo "CONFIG_USER_ONLY=y" >> $config_mak + echo "CONFIG_USER_ONLY=y" >> $config_target_mak fi if test "$target_linux_user" = "yes" ; then - echo "CONFIG_LINUX_USER=y" >> $config_mak + echo "CONFIG_LINUX_USER=y" >> $config_target_mak fi if test "$target_darwin_user" = "yes" ; then - echo "CONFIG_DARWIN_USER=y" >> $config_mak + echo "CONFIG_DARWIN_USER=y" >> $config_target_mak fi list="" if test ! -z "$gdb_xml_files" ; then @@ -2303,33 +2303,33 @@ if test ! -z "$gdb_xml_files" ; then list="$list $source_path/gdb-xml/$x" done fi -echo "TARGET_XML_FILES=$list" >> $config_mak +echo "TARGET_XML_FILES=$list" >> $config_target_mak case "$target_arch2" in arm|armeb|m68k|microblaze|mips|mipsel|mipsn32|mipsn32el|mips64|mips64el|ppc|ppc64|ppc64abi32|ppcemb|sparc|sparc64|sparc32plus) - echo "CONFIG_SOFTFLOAT=y" >> $config_mak + echo "CONFIG_SOFTFLOAT=y" >> $config_target_mak ;; *) - echo "CONFIG_NOSOFTFLOAT=y" >> $config_mak + echo "CONFIG_NOSOFTFLOAT=y" >> $config_target_mak ;; esac if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then - echo "TARGET_HAS_BFLT=y" >> $config_mak + echo "TARGET_HAS_BFLT=y" >> $config_target_mak fi if test "$target_user_only" = "yes" \ -a "$nptl" = "yes" -a "$target_nptl" = "yes"; then - echo "CONFIG_USE_NPTL=y" >> $config_mak + echo "CONFIG_USE_NPTL=y" >> $config_target_mak fi # 32 bit ELF loader in addition to native 64 bit loader? if test "$target_user_only" = "yes" -a "$elfload32" = "yes"; then - echo "TARGET_HAS_ELFLOAD32=y" >> $config_mak + echo "TARGET_HAS_ELFLOAD32=y" >> $config_target_mak fi if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then - echo "CONFIG_USE_GUEST_BASE=y" >> $config_mak + echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak fi if test "$target_bsd_user" = "yes" ; then - echo "CONFIG_BSD_USER=y" >> $config_mak + echo "CONFIG_BSD_USER=y" >> $config_target_mak fi # generate QEMU_CFLAGS/LDFLAGS for targets @@ -2348,40 +2348,40 @@ cflags="-I\$(SRC_PATH)/fpu $cflags" for i in $ARCH $TARGET_BASE_ARCH ; do case "$i" in alpha) - echo "CONFIG_ALPHA_DIS=y" >> $config_mak + echo "CONFIG_ALPHA_DIS=y" >> $config_target_mak ;; arm) - echo "CONFIG_ARM_DIS=y" >> $config_mak + echo "CONFIG_ARM_DIS=y" >> $config_target_mak ;; cris) - echo "CONFIG_CRIS_DIS=y" >> $config_mak + echo "CONFIG_CRIS_DIS=y" >> $config_target_mak ;; hppa) - echo "CONFIG_HPPA_DIS=y" >> $config_mak + echo "CONFIG_HPPA_DIS=y" >> $config_target_mak ;; i386|x86_64) - echo "CONFIG_I386_DIS=y" >> $config_mak + echo "CONFIG_I386_DIS=y" >> $config_target_mak ;; m68k) - echo "CONFIG_M68K_DIS=y" >> $config_mak + echo "CONFIG_M68K_DIS=y" >> $config_target_mak ;; microblaze) - echo "CONFIG_MICROBLAZE_DIS=y" >> $config_mak + echo "CONFIG_MICROBLAZE_DIS=y" >> $config_target_mak ;; mips*) - echo "CONFIG_MIPS_DIS=y" >> $config_mak + echo "CONFIG_MIPS_DIS=y" >> $config_target_mak ;; ppc*) - echo "CONFIG_PPC_DIS=y" >> $config_mak + echo "CONFIG_PPC_DIS=y" >> $config_target_mak ;; s390) - echo "CONFIG_S390_DIS=y" >> $config_mak + echo "CONFIG_S390_DIS=y" >> $config_target_mak ;; sh4) - echo "CONFIG_SH4_DIS=y" >> $config_mak + echo "CONFIG_SH4_DIS=y" >> $config_target_mak ;; sparc*) - echo "CONFIG_SPARC_DIS=y" >> $config_mak + echo "CONFIG_SPARC_DIS=y" >> $config_target_mak ;; esac done @@ -2416,18 +2416,18 @@ fi if test "$target_softmmu" = "yes" -a \( \ "$TARGET_ARCH" = "microblaze" -o \ "$TARGET_ARCH" = "cris" \) ; then - echo "CONFIG_NEED_MMU=y" >> $config_mak + echo "CONFIG_NEED_MMU=y" >> $config_target_mak fi if test "$gprof" = "yes" ; then - echo "TARGET_GPROF=yes" >> $config_mak + echo "TARGET_GPROF=yes" >> $config_target_mak if test "$target_linux_user" = "yes" ; then cflags="-p $cflags" ldflags="-p $ldflags" fi if test "$target_softmmu" = "yes" ; then ldflags="-p $ldflags" - echo "GPROF_CFLAGS=-p" >> $config_mak + echo "GPROF_CFLAGS=-p" >> $config_target_mak fi fi @@ -2454,18 +2454,18 @@ if test "$target_softmmu" = "yes" ; then esac fi -echo "LDFLAGS+=$ldflags" >> $config_mak -echo "QEMU_CFLAGS+=$cflags" >> $config_mak +echo "LDFLAGS+=$ldflags" >> $config_target_mak +echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak -echo "#include \"../config-host.h\"" > $config_h +echo "#include \"../config-host.h\"" > $config_target_h -/bin/sh $source_path/create_config < $config_mak >> $config_h +/bin/sh $source_path/create_config < $config_target_mak >> $config_target_h -if test -f ${config_h}~ ; then - if cmp -s $config_h ${config_h}~ ; then - mv ${config_h}~ $config_h +if test -f ${config_target_h}~ ; then + if cmp -s $config_target_h ${config_target_h}~ ; then + mv ${config_target_h}~ $config_target_h else - rm ${config_h}~ + rm ${config_target_h}~ fi fi |