aboutsummaryrefslogtreecommitdiff
path: root/block/mirror.c
diff options
context:
space:
mode:
Diffstat (limited to 'block/mirror.c')
-rw-r--r--block/mirror.c10
1 files changed, 4 insertions, 6 deletions
diff --git a/block/mirror.c b/block/mirror.c
index 76fddb3..820f512 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -869,11 +869,8 @@ static void coroutine_fn mirror_run(void *opaque)
ret = 0;
trace_mirror_before_sleep(s, cnt, s->synced, delay_ns);
- if (!s->synced) {
- block_job_sleep_ns(&s->common, delay_ns);
- if (block_job_is_cancelled(&s->common)) {
- break;
- }
+ if (block_job_is_cancelled(&s->common) && s->common.force) {
+ break;
} else if (!should_complete) {
delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, delay_ns);
@@ -887,7 +884,8 @@ immediate_exit:
* or it was cancelled prematurely so that we do not guarantee that
* the target is a copy of the source.
*/
- assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
+ assert(ret < 0 || ((s->common.force || !s->synced) &&
+ block_job_is_cancelled(&s->common)));
assert(need_drain);
mirror_wait_for_all_io(s);
}
generated by cgit v1.1 at 2025-01-01 06:12:00 +0000
f='#n136'>136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 
/*
 * VT82C686B south bridge support
 *
 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
 * This code is licensed under the GNU GPL v2.
 */

#include "hw.h"
#include "pc.h"
#include "vt82c686.h"
#include "i2c.h"
#include "smbus.h"
#include "pci.h"
#include "isa.h"
#include "sysbus.h"
#include "mips.h"
#include "apm.h"
#include "acpi.h"
#include "pm_smbus.h"
#include "sysemu.h"
#include "qemu-timer.h"

typedef uint32_t pci_addr_t;
#include "pci_host.h"
//#define DEBUG_VT82C686B

#ifdef DEBUG_VT82C686B
#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
#else
#define DPRINTF(fmt, ...)
#endif

typedef struct SuperIOConfig
{
    uint8_t config[0xff];
    uint8_t index;
    uint8_t data;
} SuperIOConfig;

typedef struct VT82C686BState {
    PCIDevice dev;
    SuperIOConfig superio_conf;
} VT82C686BState;

static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
{
    int can_write;
    SuperIOConfig *superio_conf = opaque;

    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x  \n", addr, data);
    if (addr == 0x3f0) {
        superio_conf->index = data & 0xff;
    } else {
        /* 0x3f1 */
        switch (superio_conf->index) {
        case 0x00 ... 0xdf:
        case 0xe4:
        case 0xe5:
        case 0xe9 ... 0xed:
        case 0xf3:
        case 0xf5:
        case 0xf7:
        case 0xf9 ... 0xfb:
        case 0xfd ... 0xff:
            can_write = 0;
            break;
        default:
            can_write = 1;

            if (can_write) {
                switch (superio_conf->index) {
                case 0xe7:
                    if ((data & 0xff) != 0xfe) {
                        DPRINTF("chage uart 1 base. unsupported yet \n");
                    }
                    break;
                case 0xe8:
                    if ((data & 0xff) != 0xbe) {
                        DPRINTF("chage uart 2 base. unsupported yet \n");
                    }
                    break;

                default:
                    superio_conf->config[superio_conf->index] = data & 0xff;
                }
            }
        }
        superio_conf->config[superio_conf->index] = data & 0xff;
    }
}

static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
{
    SuperIOConfig *superio_conf = opaque;

    DPRINTF("superio_ioport_readb  address 0x%x   \n", addr);
    return (superio_conf->config[superio_conf->index]);
}

static void vt82c686b_reset(void * opaque)
{
    PCIDevice *d = opaque;
    uint8_t *pci_conf = d->config;
    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);

    pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
                 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);

    pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
    pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
    pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
    pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
    pci_conf[0x59] = 0x04;
    pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
    pci_conf[0x5f] = 0x04;
    pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */

    vt82c->superio_conf.config[0xe0] = 0x3c;
    vt82c->superio_conf.config[0xe2] = 0x03;
    vt82c->superio_conf.config[0xe3] = 0xfc;
    vt82c->superio_conf.config[0xe6] = 0xde;
    vt82c->superio_conf.config[0xe7] = 0xfe;
    vt82c->superio_conf.config[0xe8] = 0xbe;
}

/* write config pci function0 registers. PCI-ISA bridge */
static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
                                   uint32_t val, int len)
{
    VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);

    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x \n",
           address, val, len);

    pci_default_write_config(d, address, val, len);
    if (address == 0x85) {  /* enable or disable super IO configure */
        if (val & 0x2) {
            /* floppy also uses 0x3f0 and 0x3f1.
             * But we do not emulate flopy,so just set it here. */
            isa_unassign_ioport(0x3f0, 2);
            register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
                                 &vt686->superio_conf);
            register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
                                  &vt686->superio_conf);
        } else {
            isa_unassign_ioport(0x3f0, 2);
        }
    }
}

#define ACPI_DBG_IO_ADDR  0xb044

typedef struct VT686PMState {
    PCIDevice dev;
    uint16_t pmsts;
    uint16_t pmen;
    uint16_t pmcntrl;
    APMState apm;
    QEMUTimer *tmr_timer;
    int64_t tmr_overflow_time;
    PMSMBus smb;
    uint32_t smb_io_base;
} VT686PMState;

typedef struct VT686AC97State {
    PCIDevice dev;
} VT686AC97State;

typedef struct VT686MC97State {
    PCIDevice dev;
} VT686MC97State;

#define RTC_EN    (1 << 10)
#define PWRBTN_EN (1 << 8)
#define GBL_EN    (1 << 5)
#define TMROF_EN  (1 << 0)
#define SUS_EN    (1 << 13)

#define ACPI_ENABLE  0xf1
#define ACPI_DISABLE 0xf0

static uint32_t get_pmtmr(VT686PMState *s)
{
    uint32_t d;
    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
    return d & 0xffffff;
}

static int get_pmsts(VT686PMState *s)
{
    int64_t d;
    int pmsts;
    pmsts = s->pmsts;
    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
    if (d >= s->tmr_overflow_time)
        s->pmsts |= TMROF_EN;
    return pmsts;
}

static void pm_update_sci(VT686PMState *s)
{
    int sci_level, pmsts;
    int64_t expire_time;

    pmsts = get_pmsts(s);
    sci_level = (((pmsts & s->pmen) &
                  (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
    qemu_set_irq(s->dev.irq[0], sci_level);
    /* schedule a timer interruption if needed */
    if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_TIMER_FREQUENCY);
        qemu_mod_timer(s->tmr_timer, expire_time);
    } else {
        qemu_del_timer(s->tmr_timer);
    }
}

static void pm_tmr_timer(void *opaque)
{
    VT686PMState *s = opaque;
    pm_update_sci(s);
}

static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
    VT686PMState *s = opaque;

    addr &= 0x0f;
    switch (addr) {
    case 0x00:
        {
            int64_t d;
            int pmsts;
            pmsts = get_pmsts(s);
            if (pmsts & val & TMROF_EN) {
                /* if TMRSTS is reset, then compute the new overflow time */
                d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
                s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
            }
            s->pmsts &= ~val;
            pm_update_sci(s);
        }
        break;
    case 0x02:
        s->pmen = val;
        pm_update_sci(s);
        break;
    case 0x04:
        {
            int sus_typ;
            s->pmcntrl = val & ~(SUS_EN);
            if (val & SUS_EN) {
                /* change suspend type */
                sus_typ = (val >> 10) & 3;
                switch (sus_typ) {
                case 0: /* soft power off */
                    qemu_system_shutdown_request();
                    break;
                default:
                    break;
                }
            }
        }
        break;
    default:
        break;
    }
    DPRINTF("PM writew port=0x%04x val=0x%02x\n", addr, val);
}

static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
{
    VT686PMState *s = opaque;
    uint32_t val;

    addr &= 0x0f;
    switch (addr) {
    case 0x00:
        val = get_pmsts(s);
        break;
    case 0x02:
        val = s->pmen;
        break;
    case 0x04:
        val = s->pmcntrl;
        break;
    default:
        val = 0;
        break;
    }
    DPRINTF("PM readw port=0x%04x val=0x%02x\n", addr, val);
    return val;
}

static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
{
    addr &= 0x0f;
    DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr, val);
}

static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
{
    VT686PMState *s = opaque;
    uint32_t val;

    addr &= 0x0f;
    switch (addr) {
    case 0x08:
        val = get_pmtmr(s);
        break;
    default:
        val = 0;
        break;
    }
    DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
    return val;
}

static void pm_io_space_update(VT686PMState *s)
{
    uint32_t pm_io_base;

    if (s->dev.config[0x80] & 1) {
        pm_io_base = pci_get_long(s->dev.config + 0x40);
        pm_io_base &= 0xffc0;

        /* XXX: need to improve memory and ioport allocation */