aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--hw/intc/arm_gicv3.c14
-rw-r--r--hw/intc/arm_gicv3_common.c1
-rw-r--r--hw/intc/arm_gicv3_cpuif.c7
-rw-r--r--hw/intc/arm_gicv3_its.c23
-rw-r--r--hw/intc/arm_gicv3_redist.c141
-rw-r--r--hw/intc/gicv3_internal.h9
-rw-r--r--include/hw/intc/arm_gicv3_common.h7
7 files changed, 200 insertions, 2 deletions
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index d63f8af..3f24707 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -165,6 +165,16 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq);
}
+ if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable &&
+ (cs->hpplpi.prio != 0xff)) {
+ if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) {
+ cs->hppi.irq = cs->hpplpi.irq;
+ cs->hppi.prio = cs->hpplpi.prio;
+ cs->hppi.grp = cs->hpplpi.grp;
+ seenbetter = true;
+ }
+ }
+
/* If the best interrupt we just found would preempt whatever
* was the previous best interrupt before this update, then
* we know it's definitely the best one now.
@@ -339,9 +349,13 @@ static void gicv3_set_irq(void *opaque, int irq, int level)
static void arm_gicv3_post_load(GICv3State *s)
{
+ int i;
/* Recalculate our cached idea of the current highest priority
* pending interrupt, but don't set IRQ or FIQ lines.
*/
+ for (i = 0; i < s->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->cpu[i]);
+ }
gicv3_full_update_noirqset(s);
/* Repopulate the cache of GICv3CPUState pointers for target CPUs */
gicv3_cache_all_target_cpustates(s);
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 53dea2a..223db16 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -435,6 +435,7 @@ static void arm_gicv3_common_reset(DeviceState *dev)
memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));
cs->hppi.prio = 0xff;
+ cs->hpplpi.prio = 0xff;
/* State in the CPU interface must *not* be reset here, because it
* is part of the CPU's reset domain, not the GIC device's.
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index a032d50..462a35f 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -899,10 +899,12 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq)
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
gicv3_redist_update(cs);
- } else {
+ } else if (irq < GICV3_LPI_INTID_START) {
gicv3_gicd_active_set(cs->gic, irq);
gicv3_gicd_pending_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
+ } else {
+ gicv3_redist_lpi_pending(cs, irq, 0);
}
}
@@ -1318,7 +1320,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1,
gicv3_redist_affid(cs), value);
- if (irq >= cs->gic->num_irq) {
+ if ((irq >= cs->gic->num_irq) &&
+ !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
* to the GICC_EOIR, the GIC ignores that write.
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 9761b64..84bcbb5 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -233,6 +233,7 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
uint64_t cte = 0;
bool cte_valid = false;
bool result = false;
+ uint64_t rdbase;
if (cmd == NONE) {
devid = offset;
@@ -293,6 +294,18 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
* Current implementation only supports rdbase == procnum
* Hence rdbase physical address is ignored
*/
+ rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U;
+
+ if (rdbase > s->gicv3->num_cpu) {
+ return result;
+ }
+
+ if ((cmd == CLEAR) || (cmd == DISCARD)) {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0);
+ } else {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1);
+ }
+
if (cmd == DISCARD) {
IteEntry ite = {};
/* remove mapping from interrupt translation table */
@@ -621,6 +634,7 @@ static void process_cmdq(GICv3ITSState *s)
MemTxResult res = MEMTX_OK;
bool result = true;
uint8_t cmd;
+ int i;
if (!(s->ctlr & ITS_CTLR_ENABLED)) {
return;
@@ -685,6 +699,15 @@ static void process_cmdq(GICv3ITSState *s)
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
+ /*
+ * Current implementation doesn't cache any ITS tables,
+ * but the calculated lpi priority information. We only
+ * need to trigger lpi priority re-calculation to be in
+ * sync with LPI config table or pending table changes.
+ */
+ for (i = 0; i < s->gicv3->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
+ }
break;
default:
break;
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 2108abfe9..7072bfc 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -254,6 +254,9 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
if (cs->gicr_typer & GICR_TYPER_PLPIS) {
if (value & GICR_CTLR_ENABLE_LPIS) {
cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ /* Check for any pending interr in pending table */
+ gicv3_redist_update_lpi(cs);
+ gicv3_redist_update(cs);
} else {
cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
}
@@ -532,6 +535,144 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
return r;
}
+static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq)
+{
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpict_baddr;
+ uint8_t lpite;
+ uint8_t prio;
+
+ lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) *
+ sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite,
+ sizeof(lpite));
+
+ if (!(lpite & LPI_CTE_ENABLED)) {
+ return;
+ }
+
+ if (cs->gic->gicd_ctlr & GICD_CTLR_DS) {
+ prio = lpite & LPI_PRIORITY_MASK;
+ } else {
+ prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80;
+ }
+
+ if ((prio < cs->hpplpi.prio) ||
+ ((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) {
+ cs->hpplpi.irq = irq;
+ cs->hpplpi.prio = prio;
+ /* LPIs are always non-secure Grp1 interrupts */
+ cs->hpplpi.grp = GICV3_G1NS;
+ }
+}
+
+void gicv3_redist_update_lpi(GICv3CPUState *cs)
+{
+ /*
+ * This function scans the LPI pending table and for each pending
+ * LPI, reads the corresponding entry from LPI configuration table
+ * to extract the priority info and determine if the current LPI
+ * priority is lower than the last computed high priority lpi interrupt.
+ * If yes, replace current LPI as the new high priority lpi interrupt.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ uint32_t pendt_size = 0;
+ uint8_t pend;
+ int i, bit;
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser) {
+ return;
+ }
+
+ cs->hpplpi.prio = 0xff;
+
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ /* Determine the highest priority pending interrupt among LPIs */
+ pendt_size = (1ULL << (idbits + 1));
+
+ for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
+ address_space_read(as, lpipt_baddr + i, MEMTXATTRS_UNSPECIFIED, &pend,
+ sizeof(pend));
+
+ while (pend) {
+ bit = ctz32(pend);
+ gicv3_redist_check_lpi_priority(cs, i * 8 + bit);
+ pend &= ~(1 << bit);
+ }
+ }
+}
+
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
+{
+ /*
+ * This function updates the pending bit in lpi pending table for
+ * the irq being activated or deactivated.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ bool ispend = false;
+ uint8_t pend;
+
+ /*
+ * get the bit value corresponding to this irq in the
+ * lpi pending table
+ */
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ ispend = extract32(pend, irq % 8, 1);
+
+ /* no change in the value of pending bit, return */
+ if (ispend == level) {
+ return;
+ }
+ pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
+
+ address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ /*
+ * check if this LPI is better than the current hpplpi, if yes
+ * just set hpplpi.prio and .irq without doing a full rescan
+ */
+ if (level) {
+ gicv3_redist_check_lpi_priority(cs, irq);
+ } else {
+ if (irq == cs->hpplpi.irq) {
+ gicv3_redist_update_lpi(cs);
+ }
+ }
+}
+
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
+{
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser || (irq > (1ULL << (idbits + 1)) - 1) ||
+ irq < GICV3_LPI_INTID_START) {
+ return;
+ }
+
+ /* set/clear the pending bit for this irq */
+ gicv3_redist_lpi_pending(cs, irq, level);
+
+ gicv3_redist_update(cs);
+}
+
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 530d1c1..a0369da 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -140,6 +140,8 @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
FIELD(GICR_PENDBASER, PTZ, 62, 1)
+#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd
+
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
#define ICC_CTLR_EL1_PMHE (1U << 6)
@@ -305,6 +307,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
+#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK
+#define LPI_PRIORITY_MASK 0xfc
+
#define GITS_CMDQ_ENTRY_SIZE 32
#define NUM_BYTES_IN_DW 8
@@ -397,6 +402,7 @@ FIELD(MAPC, RDBASE, 16, 32)
* Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
*/
#define GITS_CTE_SIZE (0x8ULL)
+#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH)
/* Special interrupt IDs */
#define INTID_SECURE 1020
@@ -455,6 +461,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs);
void gicv3_dist_set_irq(GICv3State *s, int irq, int level);
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_update_lpi(GICv3CPUState *cs);
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
void gicv3_init_cpuif(GICv3State *s);
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index c1348cc..aa4f0d6 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -204,6 +204,13 @@ struct GICv3CPUState {
* real state above; it doesn't need to be migrated.
*/
PendingIrq hppi;
+
+ /*
+ * Cached information recalculated from LPI tables
+ * in guest memory
+ */
+ PendingIrq hpplpi;
+
/* This is temporary working state, to avoid a malloc in gicv3_update() */
bool seenbetter;
};
generated by cgit v1.1 at 2024-12-27 06:25:44 +0000