diff options
-rw-r--r-- | .gitignore | 2 | ||||
-rw-r--r-- | Makefile | 8 | ||||
-rw-r--r-- | Makefile.hw | 36 | ||||
-rw-r--r-- | Makefile.target | 21 | ||||
-rwxr-xr-x | configure | 33 | ||||
-rw-r--r-- | cpu-all.h | 85 | ||||
-rw-r--r-- | cpu-common.h | 96 | ||||
-rw-r--r-- | cpu-defs.h | 25 | ||||
-rw-r--r-- | dma.h | 3 | ||||
-rw-r--r-- | hw/etraxfs_pic.c | 4 | ||||
-rw-r--r-- | hw/hw.h | 7 | ||||
-rw-r--r-- | hw/poison.h | 27 | ||||
-rw-r--r-- | hw/virtio-pci.c | 2 | ||||
-rw-r--r-- | sysemu.h | 4 | ||||
-rw-r--r-- | target-mips/mips-defs.h | 3 | ||||
-rw-r--r-- | target-ppc/cpu.h | 1 | ||||
-rw-r--r-- | target-sparc/cpu.h | 2 | ||||
-rw-r--r-- | targphys.h | 22 |
18 files changed, 248 insertions, 133 deletions
@@ -4,6 +4,8 @@ i386 *-darwin-user *-linux-user *-bsd-user +libhw32 +libhw64 qemu-doc.html qemu-tech.html qemu-doc.info @@ -1,6 +1,8 @@ # Makefile for QEMU. ifneq ($(wildcard config-host.mak),) +# Put the all: rule here so that config-host.mak can contain dependencies. +all: build-all include config-host.mak include $(SRC_PATH)/rules.mak else @@ -41,7 +43,7 @@ ifdef CONFIG_WIN32 LIBS+=-lwinmm -lws2_32 -liphlpapi endif -all: $(TOOLS) $(DOCS) recurse-all +build-all: $(TOOLS) $(DOCS) recurse-all config-host.mak: configure ifneq ($(wildcard config-host.mak),) @@ -237,14 +239,14 @@ clean: rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~ rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d $(MAKE) -C tests clean - for d in $(TARGET_DIRS); do \ + for d in $(TARGET_DIRS) libhw32 libhw64; do \ $(MAKE) -C $$d $@ || exit 1 ; \ done distclean: clean rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr} - for d in $(TARGET_DIRS); do \ + for d in $(TARGET_DIRS) libhw32 libhw64; do \ rm -rf $$d || exit 1 ; \ done diff --git a/Makefile.hw b/Makefile.hw new file mode 100644 index 0000000..a8c7174 --- /dev/null +++ b/Makefile.hw @@ -0,0 +1,36 @@ +# Makefile for qemu target independent devices. + +include config.mak +include ../config-host.mak +include $(SRC_PATH)/rules.mak + +.PHONY: all + +VPATH=$(SRC_PATH):$(SRC_PATH)/hw + +CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS) +LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS) + +CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@ +CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE +CPPFLAGS+=-I$(SRC_PATH)/fpu + +OBJS= +OBJS+= virtio.o virtio-pci.o +OBJS+= fw_cfg.o +OBJS+= watchdog.o +OBJS+= nand.o ecc.o + +OBJS+= m48t59.o + +OBJS+= dma-helpers.o sysbus.o + +all: $(HWLIB) + +$(HWLIB): $(OBJS) + +clean: + rm -f *.o *.d *.a *~ + +# Include automatically generated dependency files +-include $(wildcard *.d */*.d) diff --git a/Makefile.target b/Makefile.target index 4f7f47d..60dcf30 100644 --- a/Makefile.target +++ b/Makefile.target @@ -485,13 +485,11 @@ endif #CONFIG_BSD_USER # System emulator target ifndef CONFIG_USER_ONLY -OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o dma-helpers.o \ - gdbstub.o gdbstub-xml.o sysbus.o +OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o \ + gdbstub.o gdbstub-xml.o # virtio has to be here due to weird dependency between PCI and virtio-net. # need to fix this properly -OBJS+=virtio.o virtio-pci.o OBJS+=virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o -OBJS+=fw_cfg.o ifdef CONFIG_KVM OBJS+=kvm.o kvm-all.o endif @@ -564,7 +562,6 @@ OBJS += rtl8139.o OBJS += e1000.o # Generic watchdog support and some watchdog devices -OBJS += watchdog.o OBJS += wdt_ib700.o wdt_i6300esb.o ifeq ($(TARGET_BASE_ARCH), i386) @@ -581,7 +578,7 @@ CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE # shared objects OBJS+= ppc.o ide.o vga.o $(SOUND_HW) dma.o openpic.o # PREP target -OBJS+= pckbd.o serial.o i8259.o i8254.o fdc.o m48t59.o mc146818rtc.o +OBJS+= pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o OBJS+= prep_pci.o ppc_prep.o # Mac shared devices OBJS+= macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o escc.o @@ -624,15 +621,15 @@ OBJS+= etraxfs_eth.o OBJS+= etraxfs_timer.o OBJS+= etraxfs_ser.o -OBJS+= pflash_cfi02.o nand.o +OBJS+= pflash_cfi02.o endif ifeq ($(TARGET_BASE_ARCH), sparc) ifeq ($(TARGET_ARCH), sparc64) OBJS+= sun4u.o ide.o pckbd.o vga.o apb_pci.o -OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o +OBJS+= fdc.o mc146818rtc.o serial.o OBJS+= cirrus_vga.o parallel.o else -OBJS+= sun4m.o tcx.o iommu.o m48t59.o slavio_intctl.o +OBJS+= sun4m.o tcx.o iommu.o slavio_intctl.o OBJS+= slavio_timer.o escc.o slavio_misc.o fdc.o sparc32_dma.o OBJS+= cs4231.o eccmemctl.o sbi.o sun4c_intctl.o endif @@ -648,7 +645,7 @@ OBJS+= arm-semi.o OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o OBJS+= pflash_cfi01.o gumstix.o -OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o +OBJS+= zaurus.o ide.o serial.o spitz.o tosa.o tc6393xb.o OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o OBJS+= omap2.o omap_dss.o soc_dma.o OBJS+= omap_sx1.o palm.o tsc210x.o @@ -717,8 +714,8 @@ endif vl.o: qemu-options.h $(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS) -$(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a -$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a +$(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a $(HWLIB) +$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a $(HWLIB) $(call LINK,$(OBJS)) endif # !CONFIG_USER_ONLY @@ -1724,6 +1724,7 @@ fi echo "TOOLS=$tools" >> $config_mak test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h +config_host_mak=${config_mak} for target in $target_list; do target_dir="$target" @@ -1844,6 +1845,7 @@ case "$target_cpu" in echo "CONFIG_XEN=yes" >> $config_mak echo "#define CONFIG_XEN 1" >> $config_h fi + target_phys_bits=32 ;; x86_64) echo "TARGET_ARCH=x86_64" >> $config_mak @@ -1865,11 +1867,13 @@ case "$target_cpu" in echo "CONFIG_XEN=yes" >> $config_mak echo "#define CONFIG_XEN 1" >> $config_h fi + target_phys_bits=64 ;; alpha) echo "TARGET_ARCH=alpha" >> $config_mak echo "#define TARGET_ARCH \"alpha\"" >> $config_h echo "#define TARGET_ALPHA 1" >> $config_h + target_phys_bits=64 ;; arm|armeb) echo "TARGET_ARCH=arm" >> $config_mak @@ -1878,12 +1882,14 @@ case "$target_cpu" in bflt="yes" target_nptl="yes" gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" + target_phys_bits=32 ;; cris) echo "TARGET_ARCH=cris" >> $config_mak echo "#define TARGET_ARCH \"cris\"" >> $config_h echo "#define TARGET_CRIS 1" >> $config_h target_nptl="yes" + target_phys_bits=32 ;; m68k) echo "TARGET_ARCH=m68k" >> $config_mak @@ -1891,18 +1897,21 @@ case "$target_cpu" in echo "#define TARGET_M68K 1" >> $config_h bflt="yes" gdb_xml_files="cf-core.xml cf-fp.xml" + target_phys_bits=32 ;; mips|mipsel) echo "TARGET_ARCH=mips" >> $config_mak echo "#define TARGET_ARCH \"mips\"" >> $config_h echo "#define TARGET_MIPS 1" >> $config_h echo "#define TARGET_ABI_MIPSO32 1" >> $config_h + target_phys_bits=64 ;; mipsn32|mipsn32el) echo "TARGET_ARCH=mipsn32" >> $config_mak echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h echo "#define TARGET_MIPS 1" >> $config_h echo "#define TARGET_ABI_MIPSN32 1" >> $config_h + target_phys_bits=64 ;; mips64|mips64el) echo "TARGET_ARCH=mips64" >> $config_mak @@ -1910,12 +1919,14 @@ case "$target_cpu" in echo "#define TARGET_MIPS 1" >> $config_h echo "#define TARGET_MIPS64 1" >> $config_h echo "#define TARGET_ABI_MIPSN64 1" >> $config_h + target_phys_bits=64 ;; ppc) echo "TARGET_ARCH=ppc" >> $config_mak echo "#define TARGET_ARCH \"ppc\"" >> $config_h echo "#define TARGET_PPC 1" >> $config_h gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=32 ;; ppcemb) echo "TARGET_ARCH=ppcemb" >> $config_mak @@ -1929,6 +1940,7 @@ case "$target_cpu" in echo "#define CONFIG_KVM 1" >> $config_h fi gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 ;; ppc64) echo "TARGET_ARCH=ppc64" >> $config_mak @@ -1937,6 +1949,7 @@ case "$target_cpu" in echo "#define TARGET_PPC 1" >> $config_h echo "#define TARGET_PPC64 1" >> $config_h gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 ;; ppc64abi32) echo "TARGET_ARCH=ppc64" >> $config_mak @@ -1947,6 +1960,7 @@ case "$target_cpu" in echo "#define TARGET_PPC64 1" >> $config_h echo "#define TARGET_ABI32 1" >> $config_h gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 ;; sh4|sh4eb) echo "TARGET_ARCH=sh4" >> $config_mak @@ -1954,11 +1968,13 @@ case "$target_cpu" in echo "#define TARGET_SH4 1" >> $config_h bflt="yes" target_nptl="yes" + target_phys_bits=32 ;; sparc) echo "TARGET_ARCH=sparc" >> $config_mak echo "#define TARGET_ARCH \"sparc\"" >> $config_h echo "#define TARGET_SPARC 1" >> $config_h + target_phys_bits=64 ;; sparc64) echo "TARGET_ARCH=sparc64" >> $config_mak @@ -1966,6 +1982,7 @@ case "$target_cpu" in echo "#define TARGET_SPARC 1" >> $config_h echo "#define TARGET_SPARC64 1" >> $config_h elfload32="yes" + target_phys_bits=64 ;; sparc32plus) echo "TARGET_ARCH=sparc64" >> $config_mak @@ -1975,12 +1992,19 @@ case "$target_cpu" in echo "#define TARGET_SPARC 1" >> $config_h echo "#define TARGET_SPARC64 1" >> $config_h echo "#define TARGET_ABI32 1" >> $config_h + target_phys_bits=64 ;; *) echo "Unsupported target CPU" exit 1 ;; esac +if [ $target_phys_bits -lt $hostlongbits ] ; then + target_phys_bits=$hostlongbits +fi +echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak +echo "#define TARGET_PHYS_ADDR_BITS $target_phys_bits" >> $config_h +echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak if test "$target_bigendian" = "yes" ; then echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h @@ -2065,3 +2089,12 @@ if test "$source_path_used" = "yes" ; then ln -s $source_path/$f $f done fi + +for hwlib in 32 64; do + d=libhw$hwlib + mkdir -p $d + rm -f $d/Makefile + ln -s $source_path/Makefile.hw $d/Makefile + echo "HWLIB=libqemuhw$hwlib.a" > $d/config.mak + echo "CPPFLAGS=-DTARGET_PHYS_ADDR_BITS=$hwlib" >> $d/config.mak +done @@ -21,10 +21,7 @@ #define CPU_ALL_H #include "qemu-common.h" - -#if defined(__arm__) || defined(__sparc__) || defined(__mips__) || defined(__hppa__) -#define WORDS_ALIGNED -#endif +#include "cpu-common.h" /* some important defines: * @@ -39,7 +36,6 @@ * TARGET_WORDS_BIGENDIAN : same for target cpu */ -#include "bswap.h" #include "softfloat.h" #if defined(WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN) @@ -847,13 +843,6 @@ int cpu_inw(CPUState *env, int addr); int cpu_inl(CPUState *env, int addr); #endif -/* address in the RAM (different from a physical address) */ -#ifdef CONFIG_KQEMU -typedef uint32_t ram_addr_t; -#else -typedef unsigned long ram_addr_t; -#endif - /* memory API */ extern int phys_ram_fd; @@ -867,19 +856,8 @@ extern ram_addr_t last_ram_offset; 3 flags. The ROMD code stores the page ram offset in iotlb entry, so only a limited number of ids are avaiable. */ -#define IO_MEM_SHIFT 3 #define IO_MEM_NB_ENTRIES (1 << (TARGET_PAGE_BITS - IO_MEM_SHIFT)) -#define IO_MEM_RAM (0 << IO_MEM_SHIFT) /* hardcoded offset */ -#define IO_MEM_ROM (1 << IO_MEM_SHIFT) /* hardcoded offset */ -#define IO_MEM_UNASSIGNED (2 << IO_MEM_SHIFT) -#define IO_MEM_NOTDIRTY (3 << IO_MEM_SHIFT) - -/* Acts like a ROM when read and like a device when written. */ -#define IO_MEM_ROMD (1) -#define IO_MEM_SUBPAGE (2) -#define IO_MEM_SUBWIDTH (4) - /* Flags stored in the low bits of the TLB virtual address. These are defined so that fast path ram access is all zeros. */ /* Zero if TLB entry is valid. */ @@ -890,67 +868,6 @@ extern ram_addr_t last_ram_offset; /* Set if TLB entry is an IO callback. */ #define TLB_MMIO (1 << 5) -typedef void CPUWriteMemoryFunc(void *opaque, target_phys_addr_t addr, uint32_t value); -typedef uint32_t CPUReadMemoryFunc(void *opaque, target_phys_addr_t addr); - -void cpu_register_physical_memory_offset(target_phys_addr_t start_addr, - ram_addr_t size, - ram_addr_t phys_offset, - ram_addr_t region_offset); -static inline void cpu_register_physical_memory(target_phys_addr_t start_addr, - ram_addr_t size, - ram_addr_t phys_offset) -{ - cpu_register_physical_memory_offset(start_addr, size, phys_offset, 0); -} - -ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr); -ram_addr_t qemu_ram_alloc(ram_addr_t); -void qemu_ram_free(ram_addr_t addr); -/* This should only be used for ram local to a device. */ -void *qemu_get_ram_ptr(ram_addr_t addr); -/* This should not be used by devices. */ -ram_addr_t qemu_ram_addr_from_host(void *ptr); - -int cpu_register_io_memory(int io_index, - CPUReadMemoryFunc **mem_read, - CPUWriteMemoryFunc **mem_write, - void *opaque); -void cpu_unregister_io_memory(int table_address); - -void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf, - int len, int is_write); -static inline void cpu_physical_memory_read(target_phys_addr_t addr, - uint8_t *buf, int len) -{ - cpu_physical_memory_rw(addr, buf, len, 0); -} -static inline void cpu_physical_memory_write(target_phys_addr_t addr, - const uint8_t *buf, int len) -{ - cpu_physical_memory_rw(addr, (uint8_t *)buf, len, 1); -} -void *cpu_physical_memory_map(target_phys_addr_t addr, - target_phys_addr_t *plen, - int is_write); -void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len, - int is_write, target_phys_addr_t access_len); -void *cpu_register_map_client(void *opaque, void (*callback)(void *opaque)); -void cpu_unregister_map_client(void *cookie); - -uint32_t ldub_phys(target_phys_addr_t addr); -uint32_t lduw_phys(target_phys_addr_t addr); -uint32_t ldl_phys(target_phys_addr_t addr); -uint64_t ldq_phys(target_phys_addr_t addr); -void stl_phys_notdirty(target_phys_addr_t addr, uint32_t val); -void stq_phys_notdirty(target_phys_addr_t addr, uint64_t val); -void stb_phys(target_phys_addr_t addr, uint32_t val); -void stw_phys(target_phys_addr_t addr, uint32_t val); -void stl_phys(target_phys_addr_t addr, uint32_t val); -void stq_phys(target_phys_addr_t addr, uint64_t val); - -void cpu_physical_memory_write_rom(target_phys_addr_t addr, - const uint8_t *buf, int len); int cpu_memory_rw_debug(CPUState *env, target_ulong addr, uint8_t *buf, int len, int is_write); diff --git a/cpu-common.h b/cpu-common.h new file mode 100644 index 0000000..4640924 --- /dev/null +++ b/cpu-common.h @@ -0,0 +1,96 @@ +#ifndef CPU_COMMON_H +#define CPU_COMMON_H 1 + +/* CPU interfaces that are target indpendent. */ + +#if defined(__arm__) || defined(__sparc__) || defined(__mips__) || defined(__hppa__) +#define WORDS_ALIGNED +#endif + +#include "bswap.h" + +/* address in the RAM (different from a physical address) */ +#ifdef CONFIG_KQEMU +/* FIXME: This is wrong. */ +typedef uint32_t ram_addr_t; +#else +typedef unsigned long ram_addr_t; +#endif + +/* memory API */ + +typedef void CPUWriteMemoryFunc(void *opaque, target_phys_addr_t addr, uint32_t value); +typedef uint32_t CPUReadMemoryFunc(void *opaque, target_phys_addr_t addr); + +void cpu_register_physical_memory_offset(target_phys_addr_t start_addr, + ram_addr_t size, + ram_addr_t phys_offset, + ram_addr_t region_offset); +static inline void cpu_register_physical_memory(target_phys_addr_t start_addr, + ram_addr_t size, + ram_addr_t phys_offset) +{ + cpu_register_physical_memory_offset(start_addr, size, phys_offset, 0); +} + +ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr); +ram_addr_t qemu_ram_alloc(ram_addr_t); +void qemu_ram_free(ram_addr_t addr); +/* This should only be used for ram local to a device. */ +void *qemu_get_ram_ptr(ram_addr_t addr); +/* This should not be used by devices. */ +ram_addr_t qemu_ram_addr_from_host(void *ptr); + +int cpu_register_io_memory(int io_index, + CPUReadMemoryFunc **mem_read, + CPUWriteMemoryFunc **mem_write, + void *opaque); +void cpu_unregister_io_memory(int table_address); + +void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf, + int len, int is_write); +static inline void cpu_physical_memory_read(target_phys_addr_t addr, + uint8_t *buf, int len) +{ + cpu_physical_memory_rw(addr, buf, len, 0); +} +static inline void cpu_physical_memory_write(target_phys_addr_t addr, + const uint8_t *buf, int len) +{ + cpu_physical_memory_rw(addr, (uint8_t *)buf, len, 1); +} +void *cpu_physical_memory_map(target_phys_addr_t addr, + target_phys_addr_t *plen, + int is_write); +void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len, + int is_write, target_phys_addr_t access_len); +void *cpu_register_map_client(void *opaque, void (*callback)(void *opaque)); +void cpu_unregister_map_client(void *cookie); + +uint32_t ldub_phys(target_phys_addr_t addr); +uint32_t lduw_phys(target_phys_addr_t addr); +uint32_t ldl_phys(target_phys_addr_t addr); +uint64_t ldq_phys(target_phys_addr_t addr); +void stl_phys_notdirty(target_phys_addr_t addr, uint32_t val); +void stq_phys_notdirty(target_phys_addr_t addr, uint64_t val); +void stb_phys(target_phys_addr_t addr, uint32_t val); +void stw_phys(target_phys_addr_t addr, uint32_t val); +void stl_phys(target_phys_addr_t addr, uint32_t val); +void stq_phys(target_phys_addr_t addr, uint64_t val); + +void cpu_physical_memory_write_rom(target_phys_addr_t addr, + const uint8_t *buf, int len); + +#define IO_MEM_SHIFT 3 + +#define IO_MEM_RAM (0 << IO_MEM_SHIFT) /* hardcoded offset */ +#define IO_MEM_ROM (1 << IO_MEM_SHIFT) /* hardcoded offset */ +#define IO_MEM_UNASSIGNED (2 << IO_MEM_SHIFT) +#define IO_MEM_NOTDIRTY (3 << IO_MEM_SHIFT) + +/* Acts like a ROM when read and like a device when written. */ +#define IO_MEM_ROMD (1) +#define IO_MEM_SUBPAGE (2) +#define IO_MEM_SUBWIDTH (4) + +#endif /* !CPU_COMMON_H */ @@ -30,19 +30,12 @@ #include <signal.h> #include "osdep.h" #include "sys-queue.h" +#include "targphys.h" #ifndef TARGET_LONG_BITS #error TARGET_LONG_BITS must be defined before including this header #endif -#ifndef TARGET_PHYS_ADDR_BITS -#if TARGET_LONG_BITS >= HOST_LONG_BITS -#define TARGET_PHYS_ADDR_BITS TARGET_LONG_BITS -#else -#define TARGET_PHYS_ADDR_BITS HOST_LONG_BITS -#endif -#endif - #define TARGET_LONG_SIZE (TARGET_LONG_BITS / 8) /* target_ulong is the type of a virtual address */ @@ -62,22 +55,6 @@ typedef uint64_t target_ulong; #error TARGET_LONG_SIZE undefined #endif -/* target_phys_addr_t is the type of a physical address (its size can - be different from 'target_ulong'). We have sizeof(target_phys_addr) - = max(sizeof(unsigned long), - sizeof(size_of_target_physical_address)) because we must pass a - host pointer to memory operations in some cases */ - -#if TARGET_PHYS_ADDR_BITS == 32 -typedef uint32_t target_phys_addr_t; -#define TARGET_FMT_plx "%08x" -#elif TARGET_PHYS_ADDR_BITS == 64 -typedef uint64_t target_phys_addr_t; -#define TARGET_FMT_plx "%016" PRIx64 -#else -#error TARGET_PHYS_ADDR_BITS undefined -#endif - #define HOST_LONG_SIZE (HOST_LONG_BITS / 8) #define EXCP_INTERRUPT 0x10000 /* async interruption */ @@ -11,7 +11,8 @@ #define DMA_H #include <stdio.h> -#include "cpu.h" +//#include "cpu.h" +#include "hw/hw.h" #include "block.h" typedef struct { diff --git a/hw/etraxfs_pic.c b/hw/etraxfs_pic.c index 9f650de..da9d0c3 100644 --- a/hw/etraxfs_pic.c +++ b/hw/etraxfs_pic.c @@ -24,8 +24,8 @@ #include "sysbus.h" #include "hw.h" -#include "pc.h" -#include "etraxfs.h" +//#include "pc.h" +//#include "etraxfs.h" #define D(x) @@ -3,6 +3,13 @@ #define QEMU_HW_H #include "qemu-common.h" + +#if defined(TARGET_PHYS_ADDR_BITS) && !defined(NEED_CPU_H) +#include "targphys.h" +#include "poison.h" +#include "cpu-common.h" +#endif + #include "irq.h" /* VM Load/Save */ diff --git a/hw/poison.h b/hw/poison.h new file mode 100644 index 0000000..94abff2 --- /dev/null +++ b/hw/poison.h @@ -0,0 +1,27 @@ +/* Poison identifiers that should not be used when building + target independent device code. */ + +#ifndef HW_POISON_H +#define HW_POISON_H +#ifdef __GNUC__ + +#pragma GCC poison TARGET_I386 +#pragma GCC poison TARGET_X86_64 +#pragma GCC poison TARGET_ALPHA +#pragma GCC poison TARGET_ARM +#pragma GCC poison TARGET_CRIS +#pragma GCC poison TARGET_M68K +#pragma GCC poison TARGET_MIPS +#pragma GCC poison TARGET_MIPS64 +#pragma GCC poison TARGET_PPC +#pragma GCC poison TARGET_PPCEMB +#pragma GCC poison TARGET_PPC64 +#pragma GCC poison TARGET_ABI32 +#pragma GCC poison TARGET_SH4 +#pragma GCC poison TARGET_SPARC +#pragma GCC poison TARGET_SPARC64 + +#pragma GCC poison TARGET_WORDS_BIGENDIAN + +#endif +#endif diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index ebc84cc..c072423 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -17,7 +17,7 @@ #include "virtio.h" #include "pci.h" -#include "sysemu.h" +//#include "sysemu.h" /* from Linux's linux/virtio_pci.h */ @@ -38,12 +38,14 @@ void qemu_system_powerdown_request(void); int qemu_shutdown_requested(void); int qemu_reset_requested(void); int qemu_powerdown_requested(void); +#ifdef NEED_CPU_H #if !defined(TARGET_SPARC) && !defined(TARGET_I386) // Please implement a power failure function to signal the OS #define qemu_system_powerdown() do{}while(0) #else void qemu_system_powerdown(void); #endif +#endif void qemu_system_reset(void); void do_savevm(Monitor *mon, const char *name); @@ -117,11 +119,13 @@ extern uint64_t node_mem[MAX_NODES]; extern const char *option_rom[MAX_OPTION_ROMS]; extern int nb_option_roms; +#ifdef NEED_CPU_H #if defined(TARGET_SPARC) || defined(TARGET_PPC) #define MAX_PROM_ENVS 128 extern const char *prom_envs[MAX_PROM_ENVS]; extern unsigned int nb_prom_envs; #endif +#endif typedef enum { IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN, diff --git a/target-mips/mips-defs.h b/target-mips/mips-defs.h index 2d0c138..54e80f1 100644 --- a/target-mips/mips-defs.h +++ b/target-mips/mips-defs.h @@ -14,9 +14,6 @@ #define TARGET_LONG_BITS 32 #endif -/* Even MIPS32 can have 36 bits physical address space. */ -#define TARGET_PHYS_ADDR_BITS 64 - /* Masks used to mark instructions to indicate which ISA level they were introduced in. */ #define ISA_MIPS1 0x00000001 diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h index 8dbc45d..59d47d2 100644 --- a/target-ppc/cpu.h +++ b/target-ppc/cpu.h @@ -37,7 +37,6 @@ #if defined(TARGET_PPCEMB) /* Specific definitions for PowerPC embedded */ /* BookE have 36 bits physical address space */ -#define TARGET_PHYS_ADDR_BITS 64 #if defined(CONFIG_USER_ONLY) /* It looks like a lot of Linux programs assume page size * is 4kB long. This is evil, but we have to deal with it... diff --git a/target-sparc/cpu.h b/target-sparc/cpu.h index 32b45f94..d592bea 100644 --- a/target-sparc/cpu.h +++ b/target-sparc/cpu.h @@ -13,8 +13,6 @@ #define TARGET_PAGE_BITS 13 /* 8k */ #endif -#define TARGET_PHYS_ADDR_BITS 64 - #define CPUState struct CPUSPARCState #include "cpu-defs.h" diff --git a/targphys.h b/targphys.h new file mode 100644 index 0000000..81a9c37 --- /dev/null +++ b/targphys.h @@ -0,0 +1,22 @@ +/* Define target_phys_addr_t if it exists. */ + +#ifndef TARGPHYS_H +#define TARGPHYS_H + +#ifdef TARGET_PHYS_ADDR_BITS +/* target_phys_addr_t is the type of a physical address (its size can + be different from 'target_ulong'). We have sizeof(target_phys_addr) + = max(sizeof(unsigned long), + sizeof(size_of_target_physical_address)) because we must pass a + host pointer to memory operations in some cases */ + +#if TARGET_PHYS_ADDR_BITS == 32 +typedef uint32_t target_phys_addr_t; +#define TARGET_FMT_plx "%08x" +#elif TARGET_PHYS_ADDR_BITS == 64 +typedef uint64_t target_phys_addr_t; +#define TARGET_FMT_plx "%016" PRIx64 +#endif +#endif + +#endif |