keyval: New keyval_parse()

keyval_parse() parses KEY=VALUE,... into a QDict.  Works like
qemu_opts_parse(), except:

* Returns a QDict instead of a QemuOpts (d'oh).

* Supports nesting, unlike QemuOpts: a KEY is split into key
  fragments at '.' (dotted key convention; the block layer does
  something similar on top of QemuOpts).  The key fragments are QDict
  keys, and the last one's value is updated to VALUE.

* Each key fragment may be up to 127 bytes long.  qemu_opts_parse()
  limits the entire key to 127 bytes.

* Overlong key fragments are rejected.  qemu_opts_parse() silently
  truncates them.

* Empty key fragments are rejected.  qemu_opts_parse() happily
  accepts empty keys.

* It does not store the returned value.  qemu_opts_parse() stores it
  in the QemuOptsList.

* It does not treat parameter "id" specially.  qemu_opts_parse()
  ignores all but the first "id", and fails when its value isn't
  id_wellformed(), or duplicate (a QemuOpts with the same ID is
  already stored).  It also screws up when a value contains ",id=".

* Implied value is not supported.  qemu_opts_parse() desugars "foo" to
  "foo=on", and "nofoo" to "foo=off".

* An implied key's value can't be empty, and can't contain ','.

I intend to grow this into a saner replacement for QemuOpts.  It'll
take time, though.

Note: keyval_parse() provides no way to do lists, and its key syntax
is incompatible with the __RFQDN_ prefix convention for downstream
extensions, because it blindly splits at '.', even in __RFQDN_.  Both
issues will be addressed later in the series.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-4-git-send-email-armbru@redhat.com>

1 files changed, 231 insertions, 0 deletions

diff --git a/util/keyval.c b/util/keyval.c
new file mode 100644
index 0000000..089685d
--- /dev/null
+++ b/util/keyval.c
@@ -0,0 +1,231 @@
+/*
+ * Parsing KEY=VALUE,... strings
+ *
+ * Copyright (C) 2017 Red Hat Inc.
+ *
+ * Authors:
+ *  Markus Armbruster <armbru@redhat.com>,
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+/*
+ * KEY=VALUE,... syntax:
+ *
+ *   key-vals     = [ key-val { ',' key-val } [ ',' ] ]
+ *   key-val      = key '=' val
+ *   key          = key-fragment { '.' key-fragment }
+ *   key-fragment = / [^=,.]* /
+ *   val          = { / [^,]* / | ',,' }
+ *
+ * Semantics defined by reduction to JSON:
+ *
+ *   key-vals defines a tree of objects rooted at R
+ *   where for each key-val = key-fragment . ... = val in key-vals
+ *       R op key-fragment op ... = val'
+ *       where (left-associative) op is member reference L.key-fragment
+ *             val' is val with ',,' replaced by ','
+ *   and only R may be empty.
+ *
+ *   Duplicate keys are permitted; all but the last one are ignored.
+ *
+ *   The equations must have a solution.  Counter-example: a.b=1,a=2
+ *   doesn't have one, because R.a must be an object to satisfy a.b=1
+ *   and a string to satisfy a=2.
+ *
+ * The length of any key-fragment must be between 1 and 127.
+ *
+ * Design flaw: there is no way to denote an empty non-root object.
+ * While interpreting "key absent" as empty object seems natural
+ * (removing a key-val from the input string removes the member when
+ * there are more, so why not when it's the last), it doesn't work:
+ * "key absent" already means "optional object absent", which isn't
+ * the same as "empty object present".
+ *
+ * Additional syntax for use with an implied key:
+ *
+ *   key-vals-ik  = val-no-key [ ',' key-vals ]
+ *   val-no-key   = / [^=,]* /
+ *
+ * where no-key is syntactic sugar for implied-key=val-no-key.
+ *
+ * TODO support lists
+ * TODO support key-fragment with __RFQDN_ prefix (downstream extensions)
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qapi/qmp/qstring.h"
+#include "qemu/option.h"
+
+/*
+ * Ensure @cur maps @key_in_cur the right way.
+ * If @value is null, it needs to map to a QDict, else to this
+ * QString.
+ * If @cur doesn't have @key_in_cur, put an empty QDict or @value,
+ * respectively.
+ * Else, if it needs to map to a QDict, and already does, do nothing.
+ * Else, if it needs to map to this QString, and already maps to a
+ * QString, replace it by @value.
+ * Else, fail because we have conflicting needs on how to map
+ * @key_in_cur.
+ * In any case, take over the reference to @value, i.e. if the caller
+ * wants to hold on to a reference, it needs to QINCREF().
+ * Use @key up to @key_cursor to identify the key in error messages.
+ * On success, return the mapped value.
+ * On failure, store an error through @errp and return NULL.
+ */
+static QObject *keyval_parse_put(QDict *cur,
+                                 const char *key_in_cur, QString *value,
+                                 const char *key, const char *key_cursor,
+                                 Error **errp)
+{
+    QObject *old, *new;
+
+    old = qdict_get(cur, key_in_cur);
+    if (old) {
+        if (qobject_type(old) != (value ? QTYPE_QSTRING : QTYPE_QDICT)) {
+            error_setg(errp, "Parameters '%.*s.*' used inconsistently",
+                       (int)(key_cursor - key), key);
+            QDECREF(value);
+            return NULL;
+        }
+        if (!value) {
+            return old;         /* already QDict, do nothing */
+        }
+        new = QOBJECT(value);   /* replacement */
+    } else {
+        new = value ? QOBJECT(value) : QOBJECT(qdict_new());
+    }
+    qdict_put_obj(cur, key_in_cur, new);
+    return new;
+}
+
+/*
+ * Parse one KEY=VALUE from @params, store result in @qdict.
+ * The first fragment of KEY applies to @qdict.  Subsequent fragments
+ * apply to nested QDicts, which are created on demand.  @implied_key
+ * is as in keyval_parse().
+ * On success, return a pointer to the next KEY=VALUE, or else to '\0'.
+ * On failure, return NULL.
+ */
+static const char *keyval_parse_one(QDict *qdict, const char *params,
+                                    const char *implied_key,
+                                    Error **errp)
+{
+    const char *key, *key_end, *s;
+    size_t len;
+    char key_in_cur[128];
+    QDict *cur;
+    QObject *next;
+    QString *val;
+
+    key = params;
+    len = strcspn(params, "=,");
+    if (implied_key && len && key[len] != '=') {
+        /* Desugar implied key */
+        key = implied_key;
+        len = strlen(implied_key);
+    }
+    key_end = key + len;
+
+    /*
+     * Loop over key fragments: @s points to current fragment, it
+     * applies to @cur.  @key_in_cur[] holds the previous fragment.
+     */
+    cur = qdict;
+    s = key;
+    for (;;) {
+        for (len = 0; s + len < key_end && s[len] != '.'; len++) {
+        }
+        if (!len) {
+            assert(key != implied_key);
+            error_setg(errp, "Invalid parameter '%.*s'",
+                       (int)(key_end - key), key);
+            return NULL;
+        }
+        if (len >= sizeof(key_in_cur)) {
+            assert(key != implied_key);
+            error_setg(errp, "Parameter%s '%.*s' is too long",
+                       s != key || s + len != key_end ? " fragment" : "",
+                       (int)len, s);
+            return NULL;
+        }
+
+        if (s != key) {
+            next = keyval_parse_put(cur, key_in_cur, NULL,
+                                    key, s - 1, errp);
+            if (!next) {
+                return NULL;
+            }
+            cur = qobject_to_qdict(next);
+            assert(cur);
+        }
+
+        memcpy(key_in_cur, s, len);
+        key_in_cur[len] = 0;
+        s += len;
+
+        if (*s != '.') {
+            break;
+        }
+        s++;
+    }
+
+    if (key == implied_key) {
+        assert(!*s);
+        s = params;
+    } else {
+        if (*s != '=') {
+            error_setg(errp, "Expected '=' after parameter '%.*s'",
+                       (int)(s - key), key);
+            return NULL;
+        }
+        s++;
+    }
+
+    val = qstring_new();
+    for (;;) {
+        if (!*s) {
+            break;
+        } else if (*s == ',') {
+            s++;
+            if (*s != ',') {
+                break;
+            }
+        }
+        qstring_append_chr(val, *s++);
+    }
+
+    if (!keyval_parse_put(cur, key_in_cur, val, key, key_end, errp)) {
+        return NULL;
+    }
+    return s;
+}
+
+/*
+ * Parse @params in QEMU's traditional KEY=VALUE,... syntax.
+ * If @implied_key, the first KEY= can be omitted.  @implied_key is
+ * implied then, and VALUE can't be empty or contain ',' or '='.
+ * On success, return a dictionary of the parsed keys and values.
+ * On failure, store an error through @errp and return NULL.
+ */
+QDict *keyval_parse(const char *params, const char *implied_key,
+                    Error **errp)
+{
+    QDict *qdict = qdict_new();
+    const char *s;
+
+    s = params;
+    while (*s) {
+        s = keyval_parse_one(qdict, s, implied_key, errp);
+        if (!s) {
+            QDECREF(qdict);
+            return NULL;
+        }
+        implied_key = NULL;
+    }
+
+    return qdict;
+}