tests/boot_linux_console: Add a SD card test for the CubieBoard

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/

The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  [...]
  console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
  console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
  console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
  console: ahci-sunxi 1c18000.sata: flags: ncq only
  console: scsi host0: ahci-sunxi
  console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
  console: of_cfs_init
  console: of_cfs_init: OK
  console: vcc3v0: disabling
  console: vcc5v0: disabling
  console: usb1-vbus: disabling
  console: usb2-vbus: disabling
  console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
  console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
  console: ata1.00: applying bridge limits
  console: ata1.00: configured for UDMA/100
  console: scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
  console: sd 0:0:0:0: Attached scsi generic sg0 type 0
  console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
  console: sd 0:0:0:0: [sda] Write Protect is off
  console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  console: sd 0:0:0:0: [sda] Attached SCSI disk
  console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
  console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
  console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
  [...]
  console: cat /proc/partitions
  console: / # cat /proc/partitions
  console: major minor  #blocks  name
  console: 1        0       4096 ram0
  console: 1        1       4096 ram1
  console: 1        2       4096 ram2
  console: 1        3       4096 ram3
  console: 8        0      20480 sda
  console: reboot
  console: / # reboot
  [...]
  console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
  console: reboot: Restarting system
  PASS (48.39 s)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index 4643f60..e40b846 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -441,6 +441,50 @@ class BootLinuxConsole(Test):
         exec_command_and_wait_for_pattern(self, 'reboot',
                                                 'reboot: Restarting system')
 
+    def test_arm_cubieboard_sata(self):
+        """
+        :avocado: tags=arch:arm
+        :avocado: tags=machine:cubieboard
+        """
+        deb_url = ('https://apt.armbian.com/pool/main/l/'
+                   'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb')
+        deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315'
+        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+        kernel_path = self.extract_from_deb(deb_path,
+                                            '/boot/vmlinuz-4.20.7-sunxi')
+        dtb_path = '/usr/lib/linux-image-dev-sunxi/sun4i-a10-cubieboard.dtb'
+        dtb_path = self.extract_from_deb(deb_path, dtb_path)
+        rootfs_url = ('https://github.com/groeck/linux-build-test/raw/'
+                      '2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/'
+                      'arm/rootfs-armv5.ext2.gz')
+        rootfs_hash = '093e89d2b4d982234bf528bc9fb2f2f17a9d1f93'
+        rootfs_path_gz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+        rootfs_path = os.path.join(self.workdir, 'rootfs.cpio')
+        archive.gzip_uncompress(rootfs_path_gz, rootfs_path)
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyS0,115200 '
+                               'usbcore.nousb '
+                               'root=/dev/sda ro '
+                               'panic=-1 noreboot')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-dtb', dtb_path,
+                         '-drive', 'if=none,format=raw,id=disk0,file='
+                                   + rootfs_path,
+                         '-device', 'ide-hd,bus=ide.0,drive=disk0',
+                         '-append', kernel_command_line,
+                         '-no-reboot')
+        self.vm.launch()
+        self.wait_for_console_pattern('Boot successful.')
+
+        exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+                                                'Allwinner sun4i/sun5i')
+        exec_command_and_wait_for_pattern(self, 'cat /proc/partitions',
+                                                'sda')
+        exec_command_and_wait_for_pattern(self, 'reboot',
+                                                'reboot: Restarting system')
+
     def test_s390x_s390_ccw_virtio(self):
         """
         :avocado: tags=arch:s390x