linux-user: move alpha cpu loop to alpha directory

No code change, only move code from main.c to
alpha/cpu_loop.c.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-15-laurent@vivier.eu>

1 files changed, 0 insertions, 204 deletions

diff --git a/linux-user/main.c b/linux-user/main.c
index 7c223a5..37cf3a7 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -149,200 +149,6 @@ void fork_end(int child)
     }
 }
 
-#ifdef TARGET_ALPHA
-void cpu_loop(CPUAlphaState *env)
-{
-    CPUState *cs = CPU(alpha_env_get_cpu(env));
-    int trapnr;
-    target_siginfo_t info;
-    abi_long sysret;
-
-    while (1) {
-        bool arch_interrupt = true;
-
-        cpu_exec_start(cs);
-        trapnr = cpu_exec(cs);
-        cpu_exec_end(cs);
-        process_queued_cpu_work(cs);
-
-        switch (trapnr) {
-        case EXCP_RESET:
-            fprintf(stderr, "Reset requested. Exit\n");
-            exit(EXIT_FAILURE);
-            break;
-        case EXCP_MCHK:
-            fprintf(stderr, "Machine check exception. Exit\n");
-            exit(EXIT_FAILURE);
-            break;
-        case EXCP_SMP_INTERRUPT:
-        case EXCP_CLK_INTERRUPT:
-        case EXCP_DEV_INTERRUPT:
-            fprintf(stderr, "External interrupt. Exit\n");
-            exit(EXIT_FAILURE);
-            break;
-        case EXCP_MMFAULT:
-            info.si_signo = TARGET_SIGSEGV;
-            info.si_errno = 0;
-            info.si_code = (page_get_flags(env->trap_arg0) & PAGE_VALID
-                            ? TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR);
-            info._sifields._sigfault._addr = env->trap_arg0;
-            queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            break;
-        case EXCP_UNALIGN:
-            info.si_signo = TARGET_SIGBUS;
-            info.si_errno = 0;
-            info.si_code = TARGET_BUS_ADRALN;
-            info._sifields._sigfault._addr = env->trap_arg0;
-            queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            break;
-        case EXCP_OPCDEC:
-        do_sigill:
-            info.si_signo = TARGET_SIGILL;
-            info.si_errno = 0;
-            info.si_code = TARGET_ILL_ILLOPC;
-            info._sifields._sigfault._addr = env->pc;
-            queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            break;
-        case EXCP_ARITH:
-            info.si_signo = TARGET_SIGFPE;
-            info.si_errno = 0;
-            info.si_code = TARGET_FPE_FLTINV;
-            info._sifields._sigfault._addr = env->pc;
-            queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            break;
-        case EXCP_FEN:
-            /* No-op.  Linux simply re-enables the FPU.  */
-            break;
-        case EXCP_CALL_PAL:
-            switch (env->error_code) {
-            case 0x80:
-                /* BPT */
-                info.si_signo = TARGET_SIGTRAP;
-                info.si_errno = 0;
-                info.si_code = TARGET_TRAP_BRKPT;
-                info._sifields._sigfault._addr = env->pc;
-                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-                break;
-            case 0x81:
-                /* BUGCHK */
-                info.si_signo = TARGET_SIGTRAP;
-                info.si_errno = 0;
-                info.si_code = 0;
-                info._sifields._sigfault._addr = env->pc;
-                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-                break;
-            case 0x83:
-                /* CALLSYS */
-                trapnr = env->ir[IR_V0];
-                sysret = do_syscall(env, trapnr,
-                                    env->ir[IR_A0], env->ir[IR_A1],
-                                    env->ir[IR_A2], env->ir[IR_A3],
-                                    env->ir[IR_A4], env->ir[IR_A5],
-                                    0, 0);
-                if (sysret == -TARGET_ERESTARTSYS) {
-                    env->pc -= 4;
-                    break;
-                }
-                if (sysret == -TARGET_QEMU_ESIGRETURN) {
-                    break;
-                }
-                /* Syscall writes 0 to V0 to bypass error check, similar
-                   to how this is handled internal to Linux kernel.
-                   (Ab)use trapnr temporarily as boolean indicating error.  */
-                trapnr = (env->ir[IR_V0] != 0 && sysret < 0);
-                env->ir[IR_V0] = (trapnr ? -sysret : sysret);
-                env->ir[IR_A3] = trapnr;
-                break;
-            case 0x86:
-                /* IMB */
-                /* ??? We can probably elide the code using page_unprotect
-                   that is checking for self-modifying code.  Instead we
-                   could simply call tb_flush here.  Until we work out the
-                   changes required to turn off the extra write protection,
-                   this can be a no-op.  */
-                break;
-            case 0x9E:
-                /* RDUNIQUE */
-                /* Handled in the translator for usermode.  */
-                abort();
-            case 0x9F:
-                /* WRUNIQUE */
-                /* Handled in the translator for usermode.  */
-                abort();
-            case 0xAA:
-                /* GENTRAP */
-                info.si_signo = TARGET_SIGFPE;
-                switch (env->ir[IR_A0]) {
-                case TARGET_GEN_INTOVF:
-                    info.si_code = TARGET_FPE_INTOVF;
-                    break;
-                case TARGET_GEN_INTDIV:
-                    info.si_code = TARGET_FPE_INTDIV;
-                    break;
-                case TARGET_GEN_FLTOVF:
-                    info.si_code = TARGET_FPE_FLTOVF;
-                    break;
-                case TARGET_GEN_FLTUND:
-                    info.si_code = TARGET_FPE_FLTUND;
-                    break;
-                case TARGET_GEN_FLTINV:
-                    info.si_code = TARGET_FPE_FLTINV;
-                    break;
-                case TARGET_GEN_FLTINE:
-                    info.si_code = TARGET_FPE_FLTRES;
-                    break;
-                case TARGET_GEN_ROPRAND:
-                    info.si_code = 0;
-                    break;
-                default:
-                    info.si_signo = TARGET_SIGTRAP;
-                    info.si_code = 0;
-                    break;
-                }
-                info.si_errno = 0;
-                info._sifields._sigfault._addr = env->pc;
-                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-                break;
-            default:
-                goto do_sigill;
-            }
-            break;
-        case EXCP_DEBUG:
-            info.si_signo = gdb_handlesig(cs, TARGET_SIGTRAP);
-            if (info.si_signo) {
-                info.si_errno = 0;
-                info.si_code = TARGET_TRAP_BRKPT;
-                queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            } else {
-                arch_interrupt = false;
-            }
-            break;
-        case EXCP_INTERRUPT:
-            /* Just indicate that signals should be handled asap.  */
-            break;
-        case EXCP_ATOMIC:
-            cpu_exec_step_atomic(cs);
-            arch_interrupt = false;
-            break;
-        default:
-            printf ("Unhandled trap: 0x%x\n", trapnr);
-            cpu_dump_state(cs, stderr, fprintf, 0);
-            exit(EXIT_FAILURE);
-        }
-        process_pending_signals (env);
-
-        /* Most of the traps imply a transition through PALcode, which
-           implies an REI instruction has been executed.  Which means
-           that RX and LOCK_ADDR should be cleared.  But there are a
-           few exceptions for traps internal to QEMU.  */
-        if (arch_interrupt) {
-            env->flags &= ~ENV_FLAG_RX_FLAG;
-            env->lock_addr = -1;
-        }
-    }
-}
-#endif /* TARGET_ALPHA */
-
 #ifdef TARGET_S390X
 
 /* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS */
@@ -1914,16 +1720,6 @@ int main(int argc, char **argv, char **envp)
         env->pc = regs->sepc;
         env->gpr[xSP] = regs->sp;
     }
-#elif defined(TARGET_ALPHA)
-    {
-        int i;
-
-        for(i = 0; i < 28; i++) {
-            env->ir[i] = ((abi_ulong *)regs)[i];
-        }
-        env->ir[IR_SP] = regs->usp;
-        env->pc = regs->pc;
-    }
 #elif defined(TARGET_S390X)
     {
             int i;