linux-headers: update to 5.16-rc1

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211111110604.207376-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

7 files changed, 205 insertions, 8 deletions

diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h
index 352b51f..2c025cb 100644
--- a/include/standard-headers/drm/drm_fourcc.h
+++ b/include/standard-headers/drm/drm_fourcc.h
@@ -103,6 +103,12 @@ extern "C" {
 /* 8 bpp Red */
 #define DRM_FORMAT_R8		fourcc_code('R', '8', ' ', ' ') /* [7:0] R */
 
+/* 10 bpp Red */
+#define DRM_FORMAT_R10		fourcc_code('R', '1', '0', ' ') /* [15:0] x:R 6:10 little endian */
+
+/* 12 bpp Red */
+#define DRM_FORMAT_R12		fourcc_code('R', '1', '2', ' ') /* [15:0] x:R 4:12 little endian */
+
 /* 16 bpp Red */
 #define DRM_FORMAT_R16		fourcc_code('R', '1', '6', ' ') /* [15:0] R little endian */
 
@@ -372,6 +378,12 @@ extern "C" {
 
 #define DRM_FORMAT_RESERVED	      ((1ULL << 56) - 1)
 
+#define fourcc_mod_get_vendor(modifier) \
+	(((modifier) >> 56) & 0xff)
+
+#define fourcc_mod_is_vendor(modifier, vendor) \
+	(fourcc_mod_get_vendor(modifier) == DRM_FORMAT_MOD_VENDOR_## vendor)
+
 #define fourcc_mod_code(vendor, val) \
 	((((uint64_t)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | ((val) & 0x00ffffffffffffffULL))
 
@@ -899,9 +911,9 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier)
 
 /*
  * The top 4 bits (out of the 56 bits alloted for specifying vendor specific
- * modifiers) denote the category for modifiers. Currently we have only two
- * categories of modifiers ie AFBC and MISC. We can have a maximum of sixteen
- * different categories.
+ * modifiers) denote the category for modifiers. Currently we have three
+ * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of
+ * sixteen different categories.
  */
 #define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \
 	fourcc_mod_code(ARM, ((uint64_t)(__type) << 52) | ((__val) & 0x000fffffffffffffULL))
@@ -1017,6 +1029,109 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier)
 #define AFBC_FORMAT_MOD_USM	(1ULL << 12)
 
 /*
+ * Arm Fixed-Rate Compression (AFRC) modifiers
+ *
+ * AFRC is a proprietary fixed rate image compression protocol and format,
+ * designed to provide guaranteed bandwidth and memory footprint
+ * reductions in graphics and media use-cases.
+ *
+ * AFRC buffers consist of one or more planes, with the same components
+ * and meaning as an uncompressed buffer using the same pixel format.
+ *
+ * Within each plane, the pixel/luma/chroma values are grouped into
+ * "coding unit" blocks which are individually compressed to a
+ * fixed size (in bytes). All coding units within a given plane of a buffer
+ * store the same number of values, and have the same compressed size.
+ *
+ * The coding unit size is configurable, allowing different rates of compression.
+ *
+ * The start of each AFRC buffer plane must be aligned to an alignment granule which
+ * depends on the coding unit size.
+ *
+ * Coding Unit Size   Plane Alignment
+ * ----------------   ---------------
+ * 16 bytes           1024 bytes
+ * 24 bytes           512  bytes
+ * 32 bytes           2048 bytes
+ *
+ * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned
+ * to a multiple of the paging tile dimensions.
+ * The dimensions of each paging tile depend on whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Layout   Paging Tile Width   Paging Tile Height
+ * ------   -----------------   ------------------
+ * SCAN     16 coding units     4 coding units
+ * ROT      8  coding units     8 coding units
+ *
+ * The dimensions of each coding unit depend on the number of components
+ * in the compressed plane and whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Number of Components in Plane   Layout      Coding Unit Width   Coding Unit Height
+ * -----------------------------   ---------   -----------------   ------------------
+ * 1                               SCAN        16 samples          4 samples
+ * Example: 16x4 luma samples in a 'Y' plane
+ *          16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 1                               ROT         8 samples           8 samples
+ * Example: 8x8 luma samples in a 'Y' plane
+ *          8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 2                               DONT CARE   8 samples           4 samples
+ * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 3                               DONT CARE   4 samples           4 samples
+ * Example: 4x4 pixels in an RGB buffer without alpha
+ * -----------------------------   ---------   -----------------   ------------------
+ * 4                               DONT CARE   4 samples           4 samples
+ * Example: 4x4 pixels in an RGB buffer with alpha
+ */
+
+#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02
+
+#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \
+	DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode)
+
+/*
+ * AFRC coding unit size modifier.
+ *
+ * Indicates the number of bytes used to store each compressed coding unit for
+ * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance
+ * is the same for both Cb and Cr, which may be stored in separate planes.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store
+ * each compressed coding unit in the first plane of the buffer. For RGBA buffers
+ * this is the only plane, while for semi-planar and fully-planar YUV buffers,
+ * this corresponds to the luma plane.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store
+ * each compressed coding unit in the second and third planes in the buffer.
+ * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s).
+ *
+ * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified
+ * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero.
+ * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified.
+ */
+#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf
+#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL)
+
+#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size)
+#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4)
+
+/*
+ * AFRC scanline memory layout.
+ *
+ * Indicates if the buffer uses the scanline-optimised layout
+ * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout.
+ * The memory layout is the same for all planes.
+ */
+#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8)
+
+/*
  * Arm 16x16 Block U-Interleaved modifier
  *
  * This is used by Arm Mali Utgard and Midgard GPUs. It divides the image
diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h
index 053d3fa..688eb8d 100644
--- a/include/standard-headers/linux/ethtool.h
+++ b/include/standard-headers/linux/ethtool.h
@@ -603,6 +603,7 @@ enum ethtool_link_ext_state {
 	ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
 	ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
 	ETHTOOL_LINK_EXT_STATE_OVERHEAT,
+	ETHTOOL_LINK_EXT_STATE_MODULE,
 };
 
 /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
@@ -639,6 +640,8 @@ enum ethtool_link_ext_substate_link_logical_mismatch {
 enum ethtool_link_ext_substate_bad_signal_integrity {
 	ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
 	ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST,
+	ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS,
 };
 
 /* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */
@@ -647,6 +650,11 @@ enum ethtool_link_ext_substate_cable_issue {
 	ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
 };
 
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */
+enum ethtool_link_ext_substate_module {
+	ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1,
+};
+
 #define ETH_GSTRING_LEN		32
 
 /**
@@ -705,6 +713,29 @@ enum ethtool_stringset {
 };
 
 /**
+ * enum ethtool_module_power_mode_policy - plug-in module power mode policy
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host
+ *	to high power mode when the first port using it is put administratively
+ *	up and to low power mode when the last port using it is put
+ *	administratively down.
+ */
+enum ethtool_module_power_mode_policy {
+	ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1,
+	ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO,
+};
+
+/**
+ * enum ethtool_module_power_mode - plug-in module power mode
+ * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.
+ */
+enum ethtool_module_power_mode {
+	ETHTOOL_MODULE_POWER_MODE_LOW = 1,
+	ETHTOOL_MODULE_POWER_MODE_HIGH,
+};
+
+/**
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
  * @string_set: String set ID; one of &enum ethtool_stringset
diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h
index cce105b..23ea317 100644
--- a/include/standard-headers/linux/fuse.h
+++ b/include/standard-headers/linux/fuse.h
@@ -181,6 +181,9 @@
  *  - add FUSE_OPEN_KILL_SUIDGID
  *  - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT
  *  - add FUSE_SETXATTR_ACL_KILL_SGID
+ *
+ *  7.34
+ *  - add FUSE_SYNCFS
  */
 
 #ifndef _LINUX_FUSE_H
@@ -212,7 +215,7 @@
 #define FUSE_KERNEL_VERSION 7
 
 /** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 33
+#define FUSE_KERNEL_MINOR_VERSION 34
 
 /** The node ID of the root inode */
 #define FUSE_ROOT_ID 1
@@ -505,6 +508,7 @@ enum fuse_opcode {
 	FUSE_COPY_FILE_RANGE	= 47,
 	FUSE_SETUPMAPPING	= 48,
 	FUSE_REMOVEMAPPING	= 49,
+	FUSE_SYNCFS		= 50,
 
 	/* CUSE specific operations */
 	CUSE_INIT		= 4096,
@@ -967,4 +971,8 @@ struct fuse_removemapping_one {
 #define FUSE_REMOVEMAPPING_MAX_ENTRY   \
 		(PAGE_SIZE / sizeof(struct fuse_removemapping_one))
 
+struct fuse_syncfs_in {
+	uint64_t	padding;
+};
+
 #endif /* _LINUX_FUSE_H */
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index e709ae8..ff6ccbc 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -504,6 +504,12 @@
 #define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
 #define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
 #define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */
+#define  PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */
+#define  PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */
+#define  PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */
+#define  PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */
+#define  PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */
 #define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
 #define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
 #define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
diff --git a/include/standard-headers/linux/virtio_gpu.h b/include/standard-headers/linux/virtio_gpu.h
index 1357e47..2da48d3 100644
--- a/include/standard-headers/linux/virtio_gpu.h
+++ b/include/standard-headers/linux/virtio_gpu.h
@@ -59,6 +59,11 @@
  * VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB
  */
 #define VIRTIO_GPU_F_RESOURCE_BLOB       3
+/*
+ * VIRTIO_GPU_CMD_CREATE_CONTEXT with
+ * context_init and multiple timelines
+ */
+#define VIRTIO_GPU_F_CONTEXT_INIT        4
 
 enum virtio_gpu_ctrl_type {
 	VIRTIO_GPU_UNDEFINED = 0,
@@ -122,14 +127,20 @@ enum virtio_gpu_shm_id {
 	VIRTIO_GPU_SHM_ID_HOST_VISIBLE = 1
 };
 
-#define VIRTIO_GPU_FLAG_FENCE (1 << 0)
+#define VIRTIO_GPU_FLAG_FENCE         (1 << 0)
+/*
+ * If the following flag is set, then ring_idx contains the index
+ * of the command ring that needs to used when creating the fence
+ */
+#define VIRTIO_GPU_FLAG_INFO_RING_IDX (1 << 1)
 
 struct virtio_gpu_ctrl_hdr {
 	uint32_t type;
 	uint32_t flags;
 	uint64_t fence_id;
 	uint32_t ctx_id;
-	uint32_t padding;
+	uint8_t ring_idx;
+	uint8_t padding[3];
 };
 
 /* data passed in the cursor vq */
@@ -269,10 +280,11 @@ struct virtio_gpu_resource_create_3d {
 };
 
 /* VIRTIO_GPU_CMD_CTX_CREATE */
+#define VIRTIO_GPU_CONTEXT_INIT_CAPSET_ID_MASK 0x000000ff
 struct virtio_gpu_ctx_create {
 	struct virtio_gpu_ctrl_hdr hdr;
 	uint32_t nlen;
-	uint32_t padding;
+	uint32_t context_init;
 	char debug_name[64];
 };
 
diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h
index 4fe842c..80d76b7 100644
--- a/include/standard-headers/linux/virtio_ids.h
+++ b/include/standard-headers/linux/virtio_ids.h
@@ -54,7 +54,31 @@
 #define VIRTIO_ID_SOUND			25 /* virtio sound */
 #define VIRTIO_ID_FS			26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM			27 /* virtio pmem */
+#define VIRTIO_ID_RPMB			28 /* virtio rpmb */
 #define VIRTIO_ID_MAC80211_HWSIM	29 /* virtio mac80211-hwsim */
+#define VIRTIO_ID_VIDEO_ENCODER		30 /* virtio video encoder */
+#define VIRTIO_ID_VIDEO_DECODER		31 /* virtio video decoder */
+#define VIRTIO_ID_SCMI			32 /* virtio SCMI */
+#define VIRTIO_ID_NITRO_SEC_MOD		33 /* virtio nitro secure module*/
+#define VIRTIO_ID_I2C_ADAPTER		34 /* virtio i2c adapter */
+#define VIRTIO_ID_WATCHDOG		35 /* virtio watchdog */
+#define VIRTIO_ID_CAN			36 /* virtio can */
+#define VIRTIO_ID_DMABUF		37 /* virtio dmabuf */
+#define VIRTIO_ID_PARAM_SERV		38 /* virtio parameter server */
+#define VIRTIO_ID_AUDIO_POLICY		39 /* virtio audio policy */
 #define VIRTIO_ID_BT			40 /* virtio bluetooth */
+#define VIRTIO_ID_GPIO			41 /* virtio gpio */
+
+/*
+ * Virtio Transitional IDs
+ */
+
+#define VIRTIO_TRANS_ID_NET		1000 /* transitional virtio net */
+#define VIRTIO_TRANS_ID_BLOCK		1001 /* transitional virtio block */
+#define VIRTIO_TRANS_ID_BALLOON		1002 /* transitional virtio balloon */
+#define VIRTIO_TRANS_ID_CONSOLE		1003 /* transitional virtio console */
+#define VIRTIO_TRANS_ID_SCSI		1004 /* transitional virtio SCSI */
+#define VIRTIO_TRANS_ID_RNG		1005 /* transitional virtio rng */
+#define VIRTIO_TRANS_ID_9P		1009 /* transitional virtio 9p console */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/standard-headers/linux/virtio_vsock.h b/include/standard-headers/linux/virtio_vsock.h
index 3a23488..467e751 100644
--- a/include/standard-headers/linux/virtio_vsock.h
+++ b/include/standard-headers/linux/virtio_vsock.h
@@ -97,7 +97,8 @@ enum virtio_vsock_shutdown {
 
 /* VIRTIO_VSOCK_OP_RW flags values */
 enum virtio_vsock_rw {
-	VIRTIO_VSOCK_SEQ_EOR = 1,
+	VIRTIO_VSOCK_SEQ_EOM = 1,
+	VIRTIO_VSOCK_SEQ_EOR = 2,
 };
 
 #endif /* _LINUX_VIRTIO_VSOCK_H */