hw/riscv: Move sifive_gpio model to hw/gpio

This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_gpio model to hw/gpio directory.

Note this also removes the trace-events in the hw/riscv directory,
since gpio is the only supported trace target in that directory.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

1 files changed, 76 insertions, 0 deletions

diff --git a/include/hw/gpio/sifive_gpio.h b/include/hw/gpio/sifive_gpio.h
new file mode 100644
index 0000000..cf12fcf
--- /dev/null
+++ b/include/hw/gpio/sifive_gpio.h
@@ -0,0 +1,76 @@
+/*
+ * SiFive System-on-Chip general purpose input/output register definition
+ *
+ * Copyright 2019 AdaCore
+ *
+ * Base on nrf51_gpio.c:
+ *
+ * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef SIFIVE_GPIO_H
+#define SIFIVE_GPIO_H
+
+#include "hw/sysbus.h"
+
+#define TYPE_SIFIVE_GPIO "sifive_soc.gpio"
+#define SIFIVE_GPIO(obj) OBJECT_CHECK(SIFIVEGPIOState, (obj), TYPE_SIFIVE_GPIO)
+
+#define SIFIVE_GPIO_PINS 32
+
+#define SIFIVE_GPIO_SIZE 0x100
+
+#define SIFIVE_GPIO_REG_VALUE      0x000
+#define SIFIVE_GPIO_REG_INPUT_EN   0x004
+#define SIFIVE_GPIO_REG_OUTPUT_EN  0x008
+#define SIFIVE_GPIO_REG_PORT       0x00C
+#define SIFIVE_GPIO_REG_PUE        0x010
+#define SIFIVE_GPIO_REG_DS         0x014
+#define SIFIVE_GPIO_REG_RISE_IE    0x018
+#define SIFIVE_GPIO_REG_RISE_IP    0x01C
+#define SIFIVE_GPIO_REG_FALL_IE    0x020
+#define SIFIVE_GPIO_REG_FALL_IP    0x024
+#define SIFIVE_GPIO_REG_HIGH_IE    0x028
+#define SIFIVE_GPIO_REG_HIGH_IP    0x02C
+#define SIFIVE_GPIO_REG_LOW_IE     0x030
+#define SIFIVE_GPIO_REG_LOW_IP     0x034
+#define SIFIVE_GPIO_REG_IOF_EN     0x038
+#define SIFIVE_GPIO_REG_IOF_SEL    0x03C
+#define SIFIVE_GPIO_REG_OUT_XOR    0x040
+
+typedef struct SIFIVEGPIOState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+
+    qemu_irq irq[SIFIVE_GPIO_PINS];
+    qemu_irq output[SIFIVE_GPIO_PINS];
+
+    uint32_t value;             /* Actual value of the pin */
+    uint32_t input_en;
+    uint32_t output_en;
+    uint32_t port;              /* Pin value requested by the user */
+    uint32_t pue;
+    uint32_t ds;
+    uint32_t rise_ie;
+    uint32_t rise_ip;
+    uint32_t fall_ie;
+    uint32_t fall_ip;
+    uint32_t high_ie;
+    uint32_t high_ip;
+    uint32_t low_ie;
+    uint32_t low_ip;
+    uint32_t iof_en;
+    uint32_t iof_sel;
+    uint32_t out_xor;
+    uint32_t in;
+    uint32_t in_mask;
+
+    /* config */
+    uint32_t ngpio;
+} SIFIVEGPIOState;
+
+#endif /* SIFIVE_GPIO_H */