Merge remote-tracking branch 'bonzini/scsi-next' into staging

* bonzini/scsi-next: (32 commits)
  virtio-scsi: enable MSI-X support
  virtio-scsi: add ioeventfd support
  virtio-scsi: report parameter change events
  virtio-scsi: do not report dropped events after reset
  virtio-scsi: Report missed events
  virtio-scsi: Implement hotplug support for virtio-scsi
  scsi: report parameter changes to HBA drivers
  scsi-disk: report resized disk via sense codes
  scsi: establish precedence levels for unit attention
  scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus
  scsi: add tracepoint for scsi_req_cancel
  scsi-disk: removable hard disks support load/eject
  scsi-disk: Fail medium writes with proper sense for readonly LUNs
  scsi-disk: improve the lba-out-of-range tests for read/write/verify
  scsi-disk: rd/wr/vr-protect !=0 is an error
  scsi-disk: support toggling the write cache
  scsi-disk: parse MODE SELECT commands and parameters
  scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR
  scsi-disk: adjust offsets in MODE SENSE by 2
  scsi-disk: support emulated TO_DEV requests
  ...

7 files changed, 785 insertions, 316 deletions

diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index 2fe141d..5f6cb17 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -282,8 +282,6 @@ static inline int lsi_irq_on_rsl(LSIState *s)
 
 static void lsi_soft_reset(LSIState *s)
 {
-    lsi_request *p;
-
     DPRINTF("Reset\n");
     s->carry = 0;
 
@@ -350,15 +348,8 @@ static void lsi_soft_reset(LSIState *s)
     s->sbc = 0;
     s->csbc = 0;
     s->sbr = 0;
-    while (!QTAILQ_EMPTY(&s->queue)) {
-        p = QTAILQ_FIRST(&s->queue);
-        QTAILQ_REMOVE(&s->queue, p, next);
-        g_free(p);
-    }
-    if (s->current) {
-        g_free(s->current);
-        s->current = NULL;
-    }
+    assert(QTAILQ_EMPTY(&s->queue));
+    assert(!s->current);
 }
 
 static int lsi_dma_40bit(LSIState *s)
@@ -650,23 +641,24 @@ static lsi_request *lsi_find_by_tag(LSIState *s, uint32_t tag)
     return NULL;
 }
 
+static void lsi_request_free(LSIState *s, lsi_request *p)
+{
+    if (p == s->current) {
+        s->current = NULL;
+    } else {
+        QTAILQ_REMOVE(&s->queue, p, next);
+    }
+    g_free(p);
+}
+
 static void lsi_request_cancelled(SCSIRequest *req)
 {
     LSIState *s = DO_UPCAST(LSIState, dev.qdev, req->bus->qbus.parent);
     lsi_request *p = req->hba_private;
 
-    if (s->current && req == s->current->req) {
-        scsi_req_unref(req);
-        g_free(s->current);
-        s->current = NULL;
-        return;
-    }
-
-    if (p) {
-        QTAILQ_REMOVE(&s->queue, p, next);
-        scsi_req_unref(req);
-        g_free(p);
-    }
+    req->hba_private = NULL;
+    lsi_request_free(s, p);
+    scsi_req_unref(req);
 }
 
 /* Record that data is available for a queued command.  Returns zero if
@@ -714,10 +706,10 @@ static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid
         lsi_set_phase(s, PHASE_ST);
     }
 
-    if (s->current && req == s->current->req) {
-        scsi_req_unref(s->current->req);
-        g_free(s->current);
-        s->current = NULL;
+    if (req->hba_private == s->current) {
+        req->hba_private = NULL;
+        lsi_request_free(s, s->current);
+        scsi_req_unref(req);
     }
     lsi_resume_script(s);
 }
@@ -728,7 +720,8 @@ static void lsi_transfer_data(SCSIRequest *req, uint32_t len)
     LSIState *s = DO_UPCAST(LSIState, dev.qdev, req->bus->qbus.parent);
     int out;
 
-    if (s->waiting == 1 || !s->current || req->hba_private != s->current ||
+    assert(req->hba_private);
+    if (s->waiting == 1 || req->hba_private != s->current ||
         (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) {
         if (lsi_queue_req(s, req, len)) {
             return;
@@ -1738,7 +1731,7 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
             lsi_execute_script(s);
         }
         if (val & LSI_ISTAT0_SRST) {
-            lsi_soft_reset(s);
+            qdev_reset_all(&s->dev.qdev);
         }
         break;
     case 0x16: /* MBOX0 */
diff --git a/hw/megasas.c b/hw/megasas.c
index b99fa97..9a0eab1 100644
--- a/hw/megasas.c
+++ b/hw/megasas.c
@@ -544,7 +544,7 @@ static void megasas_reset_frames(MegasasState *s)
 static void megasas_abort_command(MegasasCmd *cmd)
 {
     if (cmd->req) {
-        scsi_req_abort(cmd->req, ABORTED_COMMAND);
+        scsi_req_cancel(cmd->req);
         cmd->req = NULL;
     }
 }
@@ -1290,35 +1290,16 @@ static int megasas_cluster_reset_ld(MegasasState *s, MegasasCmd *cmd)
 
 static int megasas_dcmd_set_properties(MegasasState *s, MegasasCmd *cmd)
 {
-    uint8_t *dummy = g_malloc(cmd->iov_size);
-
-    dma_buf_write(dummy, cmd->iov_size, &cmd->qsg);
-
-    trace_megasas_dcmd_dump_frame(0,
-            dummy[0x00], dummy[0x01], dummy[0x02], dummy[0x03],
-            dummy[0x04], dummy[0x05], dummy[0x06], dummy[0x07]);
-    trace_megasas_dcmd_dump_frame(1,
-            dummy[0x08], dummy[0x09], dummy[0x0a], dummy[0x0b],
-            dummy[0x0c], dummy[0x0d], dummy[0x0e], dummy[0x0f]);
-    trace_megasas_dcmd_dump_frame(2,
-            dummy[0x10], dummy[0x11], dummy[0x12], dummy[0x13],
-            dummy[0x14], dummy[0x15], dummy[0x16], dummy[0x17]);
-    trace_megasas_dcmd_dump_frame(3,
-            dummy[0x18], dummy[0x19], dummy[0x1a], dummy[0x1b],
-            dummy[0x1c], dummy[0x1d], dummy[0x1e], dummy[0x1f]);
-    trace_megasas_dcmd_dump_frame(4,
-            dummy[0x20], dummy[0x21], dummy[0x22], dummy[0x23],
-            dummy[0x24], dummy[0x25], dummy[0x26], dummy[0x27]);
-    trace_megasas_dcmd_dump_frame(5,
-            dummy[0x28], dummy[0x29], dummy[0x2a], dummy[0x2b],
-            dummy[0x2c], dummy[0x2d], dummy[0x2e], dummy[0x2f]);
-    trace_megasas_dcmd_dump_frame(6,
-            dummy[0x30], dummy[0x31], dummy[0x32], dummy[0x33],
-            dummy[0x34], dummy[0x35], dummy[0x36], dummy[0x37]);
-    trace_megasas_dcmd_dump_frame(7,
-            dummy[0x38], dummy[0x39], dummy[0x3a], dummy[0x3b],
-            dummy[0x3c], dummy[0x3d], dummy[0x3e], dummy[0x3f]);
-    g_free(dummy);
+    struct mfi_ctrl_props info;
+    size_t dcmd_size = sizeof(info);
+
+    if (cmd->iov_size < dcmd_size) {
+        trace_megasas_dcmd_invalid_xfer_len(cmd->index, cmd->iov_size,
+                                            dcmd_size);
+        return MFI_STAT_INVALID_PARAMETER;
+    }
+    dma_buf_write((uint8_t *)&info, cmd->iov_size, &cmd->qsg);
+    trace_megasas_dcmd_unsupported(cmd->index, cmd->iov_size);
     return MFI_STAT_OK;
 }
 
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index dc74063..e4ec19e 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -186,6 +186,10 @@ static int scsi_qdev_init(DeviceState *qdev)
                                                          dev);
     }
 
+    if (bus->info->hotplug) {
+        bus->info->hotplug(bus, dev);
+    }
+
 err:
     return rc;
 }
@@ -1068,6 +1072,16 @@ int scsi_req_parse(SCSICommand *cmd, SCSIDevice *dev, uint8_t *buf)
     return 0;
 }
 
+void scsi_device_report_change(SCSIDevice *dev, SCSISense sense)
+{
+    SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
+
+    scsi_device_set_ua(dev, sense);
+    if (bus->info->change) {
+        bus->info->change(bus, dev, sense);
+    }
+}
+
 /*
  * Predefined sense codes
  */
@@ -1112,6 +1126,16 @@ const struct SCSISense sense_code_INVALID_FIELD = {
     .key = ILLEGAL_REQUEST, .asc = 0x24, .ascq = 0x00
 };
 
+/* Illegal request, Invalid field in parameter list */
+const struct SCSISense sense_code_INVALID_PARAM = {
+    .key = ILLEGAL_REQUEST, .asc = 0x26, .ascq = 0x00
+};
+
+/* Illegal request, Parameter list length error */
+const struct SCSISense sense_code_INVALID_PARAM_LEN = {
+    .key = ILLEGAL_REQUEST, .asc = 0x1a, .ascq = 0x00
+};
+
 /* Illegal request, LUN not supported */
 const struct SCSISense sense_code_LUN_NOT_SUPPORTED = {
     .key = ILLEGAL_REQUEST, .asc = 0x25, .ascq = 0x00
@@ -1147,6 +1171,11 @@ const struct SCSISense sense_code_LUN_FAILURE = {
     .key = ABORTED_COMMAND, .asc = 0x3e, .ascq = 0x01
 };
 
+/* Unit attention, Capacity data has changed */
+const struct SCSISense sense_code_CAPACITY_CHANGED = {
+    .key = UNIT_ATTENTION, .asc = 0x2a, .ascq = 0x09
+};
+
 /* Unit attention, Power on, reset or bus device reset occurred */
 const struct SCSISense sense_code_RESET = {
     .key = UNIT_ATTENTION, .asc = 0x29, .ascq = 0x00
@@ -1172,6 +1201,11 @@ const struct SCSISense sense_code_DEVICE_INTERNAL_RESET = {
     .key = UNIT_ATTENTION, .asc = 0x29, .ascq = 0x04
 };
 
+/* Data Protection, Write Protected */
+const struct SCSISense sense_code_WRITE_PROTECTED = {
+    .key = DATA_PROTECT, .asc = 0x27, .ascq = 0x00
+};
+
 /*
  * scsi_build_sense
  *
@@ -1481,6 +1515,7 @@ void scsi_req_complete(SCSIRequest *req, int status)
 
 void scsi_req_cancel(SCSIRequest *req)
 {
+    trace_scsi_req_cancel(req->dev->id, req->lun, req->tag);
     if (!req->enqueued) {
         return;
     }
@@ -1511,6 +1546,55 @@ void scsi_req_abort(SCSIRequest *req, int status)
     scsi_req_unref(req);
 }
 
+static int scsi_ua_precedence(SCSISense sense)
+{
+    if (sense.key != UNIT_ATTENTION) {
+        return INT_MAX;
+    }
+    if (sense.asc == 0x29 && sense.ascq == 0x04) {
+        /* DEVICE INTERNAL RESET goes with POWER ON OCCURRED */
+        return 1;
+    } else if (sense.asc == 0x3F && sense.ascq == 0x01) {
+        /* MICROCODE HAS BEEN CHANGED goes with SCSI BUS RESET OCCURRED */
+        return 2;
+    } else if (sense.asc == 0x29 && (sense.ascq == 0x05 || sense.ascq == 0x06)) {
+        /* These two go with "all others". */
+        ;
+    } else if (sense.asc == 0x29 && sense.ascq <= 0x07) {
+        /* POWER ON, RESET OR BUS DEVICE RESET OCCURRED = 0
+         * POWER ON OCCURRED = 1
+         * SCSI BUS RESET OCCURRED = 2
+         * BUS DEVICE RESET FUNCTION OCCURRED = 3
+         * I_T NEXUS LOSS OCCURRED = 7
+         */
+        return sense.ascq;
+    } else if (sense.asc == 0x2F && sense.ascq == 0x01) {
+        /* COMMANDS CLEARED BY POWER LOSS NOTIFICATION  */
+        return 8;
+    }
+    return (sense.asc << 8) | sense.ascq;
+}
+
+void scsi_device_set_ua(SCSIDevice *sdev, SCSISense sense)
+{
+    int prec1, prec2;
+    if (sense.key != UNIT_ATTENTION) {
+        return;
+    }
+    trace_scsi_device_set_ua(sdev->id, sdev->lun, sense.key,
+                             sense.asc, sense.ascq);
+
+    /*
+     * Override a pre-existing unit attention condition, except for a more
+     * important reset condition.
+    */
+    prec1 = scsi_ua_precedence(sdev->unit_attention);
+    prec2 = scsi_ua_precedence(sense);
+    if (prec2 < prec1) {
+        sdev->unit_attention = sense;
+    }
+}
+
 void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)
 {
     SCSIRequest *req;
@@ -1519,7 +1603,8 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)
         req = QTAILQ_FIRST(&sdev->requests);
         scsi_req_cancel(req);
     }
-    sdev->unit_attention = sense;
+
+    scsi_device_set_ua(sdev, sense);
 }
 
 static char *scsibus_get_dev_path(DeviceState *dev)
@@ -1634,6 +1719,17 @@ static int get_scsi_requests(QEMUFile *f, void *pv, size_t size)
     return 0;
 }
 
+static int scsi_qdev_unplug(DeviceState *qdev)
+{
+    SCSIDevice *dev = SCSI_DEVICE(qdev);
+    SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus);
+
+    if (bus->info->hot_unplug) {
+        bus->info->hot_unplug(bus, dev);
+    }
+    return qdev_simple_unplug_cb(qdev);
+}
+
 static const VMStateInfo vmstate_info_scsi_requests = {
     .name = "scsi-requests",
     .get  = get_scsi_requests,
@@ -1670,7 +1766,7 @@ static void scsi_device_class_init(ObjectClass *klass, void *data)
     DeviceClass *k = DEVICE_CLASS(klass);
     k->bus_type = TYPE_SCSI_BUS;
     k->init     = scsi_qdev_init;
-    k->unplug   = qdev_simple_unplug_cb;
+    k->unplug   = scsi_qdev_unplug;
     k->exit     = scsi_qdev_exit;
     k->props    = scsi_props;
 }
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 525816c..84b63ff 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -43,6 +43,7 @@ do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
 
 #define SCSI_DMA_BUF_SIZE    131072
 #define SCSI_MAX_INQUIRY_LEN 256
+#define SCSI_MAX_MODE_LEN    256
 
 typedef struct SCSIDiskState SCSIDiskState;
 
@@ -72,6 +73,8 @@ struct SCSIDiskState
     QEMUBH *bh;
     char *version;
     char *serial;
+    char *vendor;
+    char *product;
     bool tray_open;
     bool tray_locked;
 };
@@ -167,7 +170,7 @@ static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req)
     qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 }
 
-static void scsi_flush_complete(void * opaque, int ret)
+static void scsi_aio_complete(void *opaque, int ret)
 {
     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
@@ -220,7 +223,7 @@ static void scsi_write_do_fua(SCSIDiskReq *r)
 
     if (scsi_is_cmd_fua(&r->req.cmd)) {
         bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
-        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
+        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
         return;
     }
 
@@ -341,13 +344,6 @@ static void scsi_read_data(SCSIRequest *req)
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
     bool first;
 
-    if (r->sector_count == (uint32_t)-1) {
-        DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
-        r->sector_count = 0;
-        r->started = true;
-        scsi_req_data(&r->req, r->iov.iov_len);
-        return;
-    }
     DPRINTF("Read sector_count=%d\n", r->sector_count);
     if (r->sector_count == 0) {
         /* This also clears the sense buffer for REQUEST SENSE.  */
@@ -669,12 +665,10 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
 
     outbuf[0] = s->qdev.type & 0x1f;
     outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0;
-    if (s->qdev.type == TYPE_ROM) {
-        memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
-    } else {
-        memcpy(&outbuf[16], "QEMU HARDDISK   ", 16);
-    }
-    memcpy(&outbuf[8], "QEMU    ", 8);
+
+    strpadcpy((char *) &outbuf[16], 16, s->product, ' ');
+    strpadcpy((char *) &outbuf[8], 8, s->vendor, ' ');
+
     memset(&outbuf[32], 0, 4);
     memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version)));
     /*
@@ -966,148 +960,157 @@ static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf,
         [MODE_PAGE_AUDIO_CTL]              = (1 << TYPE_ROM),
         [MODE_PAGE_CAPABILITIES]           = (1 << TYPE_ROM),
     };
-    uint8_t *p = *p_outbuf;
+
+    uint8_t *p = *p_outbuf + 2;
+    int length;
 
     if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) {
         return -1;
     }
 
-    p[0] = page;
-
     /*
      * If Changeable Values are requested, a mask denoting those mode parameters
      * that are changeable shall be returned. As we currently don't support
      * parameter changes via MODE_SELECT all bits are returned set to zero.
      * The buffer was already menset to zero by the caller of this function.
+     *
+     * The offsets here are off by two compared to the descriptions in the
+     * SCSI specs, because those include a 2-byte header.  This is unfortunate,
+     * but it is done so that offsets are consistent within our implementation
+     * of MODE SENSE and MODE SELECT.  MODE SELECT has to deal with both
+     * 2-byte and 4-byte headers.
      */
     switch (page) {
     case MODE_PAGE_HD_GEOMETRY:
-        p[1] = 0x16;
+        length = 0x16;
         if (page_control == 1) { /* Changeable Values */
             break;
         }
         /* if a geometry hint is available, use it */
-        p[2] = (s->qdev.conf.cyls >> 16) & 0xff;
-        p[3] = (s->qdev.conf.cyls >> 8) & 0xff;
-        p[4] = s->qdev.conf.cyls & 0xff;
-        p[5] = s->qdev.conf.heads & 0xff;
+        p[0] = (s->qdev.conf.cyls >> 16) & 0xff;
+        p[1] = (s->qdev.conf.cyls >> 8) & 0xff;
+        p[2] = s->qdev.conf.cyls & 0xff;
+        p[3] = s->qdev.conf.heads & 0xff;
         /* Write precomp start cylinder, disabled */
-        p[6] = (s->qdev.conf.cyls >> 16) & 0xff;
-        p[7] = (s->qdev.conf.cyls >> 8) & 0xff;
-        p[8] = s->qdev.conf.cyls & 0xff;
+        p[4] = (s->qdev.conf.cyls >> 16) & 0xff;
+        p[5] = (s->qdev.conf.cyls >> 8) & 0xff;
+        p[6] = s->qdev.conf.cyls & 0xff;
         /* Reduced current start cylinder, disabled */
-        p[9] = (s->qdev.conf.cyls >> 16) & 0xff;
-        p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
-        p[11] = s->qdev.conf.cyls & 0xff;
+        p[7] = (s->qdev.conf.cyls >> 16) & 0xff;
+        p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
+        p[9] = s->qdev.conf.cyls & 0xff;
         /* Device step rate [ns], 200ns */
-        p[12] = 0;
-        p[13] = 200;
+        p[10] = 0;
+        p[11] = 200;
         /* Landing zone cylinder */
+        p[12] = 0xff;
+        p[13] =  0xff;
         p[14] = 0xff;
-        p[15] =  0xff;
-        p[16] = 0xff;
         /* Medium rotation rate [rpm], 5400 rpm */
-        p[20] = (5400 >> 8) & 0xff;
-        p[21] = 5400 & 0xff;
+        p[18] = (5400 >> 8) & 0xff;
+        p[19] = 5400 & 0xff;
         break;
 
     case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY:
-        p[1] = 0x1e;
+        length = 0x1e;
         if (page_control == 1) { /* Changeable Values */
             break;
         }
         /* Transfer rate [kbit/s], 5Mbit/s */
-        p[2] = 5000 >> 8;
-        p[3] = 5000 & 0xff;
+        p[0] = 5000 >> 8;
+        p[1] = 5000 & 0xff;
         /* if a geometry hint is available, use it */
-        p[4] = s->qdev.conf.heads & 0xff;
-        p[5] = s->qdev.conf.secs & 0xff;
-        p[6] = s->qdev.blocksize >> 8;
+        p[2] = s->qdev.conf.heads & 0xff;
+        p[3] = s->qdev.conf.secs & 0xff;
+        p[4] = s->qdev.blocksize >> 8;
+        p[6] = (s->qdev.conf.cyls >> 8) & 0xff;
+        p[7] = s->qdev.conf.cyls & 0xff;
+        /* Write precomp start cylinder, disabled */
         p[8] = (s->qdev.conf.cyls >> 8) & 0xff;
         p[9] = s->qdev.conf.cyls & 0xff;
-        /* Write precomp start cylinder, disabled */
+        /* Reduced current start cylinder, disabled */
         p[10] = (s->qdev.conf.cyls >> 8) & 0xff;
         p[11] = s->qdev.conf.cyls & 0xff;
-        /* Reduced current start cylinder, disabled */
-        p[12] = (s->qdev.conf.cyls >> 8) & 0xff;
-        p[13] = s->qdev.conf.cyls & 0xff;
         /* Device step rate [100us], 100us */
-        p[14] = 0;
-        p[15] = 1;
+        p[12] = 0;
+        p[13] = 1;
         /* Device step pulse width [us], 1us */
-        p[16] = 1;
+        p[14] = 1;
         /* Device head settle delay [100us], 100us */
-        p[17] = 0;
-        p[18] = 1;
+        p[15] = 0;
+        p[16] = 1;
         /* Motor on delay [0.1s], 0.1s */
-        p[19] = 1;
+        p[17] = 1;
         /* Motor off delay [0.1s], 0.1s */
-        p[20] = 1;
+        p[18] = 1;
         /* Medium rotation rate [rpm], 5400 rpm */
-        p[28] = (5400 >> 8) & 0xff;
-        p[29] = 5400 & 0xff;
+        p[26] = (5400 >> 8) & 0xff;
+        p[27] = 5400 & 0xff;
         break;
 
     case MODE_PAGE_CACHING:
-        p[0] = 8;
-        p[1] = 0x12;
-        if (page_control == 1) { /* Changeable Values */
-            break;
-        }
-        if (bdrv_enable_write_cache(s->qdev.conf.bs)) {
-            p[2] = 4; /* WCE */
+        length = 0x12;
+        if (page_control == 1 || /* Changeable Values */
+            bdrv_enable_write_cache(s->qdev.conf.bs)) {
+            p[0] = 4; /* WCE */
         }
         break;
 
     case MODE_PAGE_R_W_ERROR:
-        p[1] = 10;
-        p[2] = 0x80; /* Automatic Write Reallocation Enabled */
+        length = 10;
+        if (page_control == 1) { /* Changeable Values */
+            break;
+        }
+        p[0] = 0x80; /* Automatic Write Reallocation Enabled */
         if (s->qdev.type == TYPE_ROM) {
-            p[3] = 0x20; /* Read Retry Count */
+            p[1] = 0x20; /* Read Retry Count */
         }
         break;
 
     case MODE_PAGE_AUDIO_CTL:
-        p[1] = 14;
+        length = 14;
         break;
 
     case MODE_PAGE_CAPABILITIES:
-        p[1] = 0x14;
+        length = 0x14;
         if (page_control == 1) { /* Changeable Values */
             break;
         }
 
-        p[2] = 0x3b; /* CD-R & CD-RW read */
-        p[3] = 0; /* Writing not supported */
-        p[4] = 0x7f; /* Audio, composite, digital out,
+        p[0] = 0x3b; /* CD-R & CD-RW read */
+        p[1] = 0; /* Writing not supported */
+        p[2] = 0x7f; /* Audio, composite, digital out,
                         mode 2 form 1&2, multi session */
-        p[5] = 0xff; /* CD DA, DA accurate, RW supported,
+        p[3] = 0xff; /* CD DA, DA accurate, RW supported,
                         RW corrected, C2 errors, ISRC,
                         UPC, Bar code */
-        p[6] = 0x2d | (s->tray_locked ? 2 : 0);
+        p[4] = 0x2d | (s->tray_locked ? 2 : 0);
         /* Locking supported, jumper present, eject, tray */
-        p[7] = 0; /* no volume & mute control, no
+        p[5] = 0; /* no volume & mute control, no
                      changer */
-        p[8] = (50 * 176) >> 8; /* 50x read speed */
-        p[9] = (50 * 176) & 0xff;
-        p[10] = 2 >> 8; /* Two volume levels */
-        p[11] = 2 & 0xff;
-        p[12] = 2048 >> 8; /* 2M buffer */
-        p[13] = 2048 & 0xff;
-        p[14] = (16 * 176) >> 8; /* 16x read speed current */
-        p[15] = (16 * 176) & 0xff;
-        p[18] = (16 * 176) >> 8; /* 16x write speed */
+        p[6] = (50 * 176) >> 8; /* 50x read speed */
+        p[7] = (50 * 176) & 0xff;
+        p[8] = 2 >> 8; /* Two volume levels */
+        p[9] = 2 & 0xff;
+        p[10] = 2048 >> 8; /* 2M buffer */
+        p[11] = 2048 & 0xff;
+        p[12] = (16 * 176) >> 8; /* 16x read speed current */
+        p[13] = (16 * 176) & 0xff;
+        p[16] = (16 * 176) >> 8; /* 16x write speed */
+        p[17] = (16 * 176) & 0xff;
+        p[18] = (16 * 176) >> 8; /* 16x write speed current */
         p[19] = (16 * 176) & 0xff;
-        p[20] = (16 * 176) >> 8; /* 16x write speed current */
-        p[21] = (16 * 176) & 0xff;
         break;
 
     default:
         return -1;
     }
 
-    *p_outbuf += p[1] + 2;
-    return p[1] + 2;
+    assert(length < 256);
+    (*p_outbuf)[0] = page;
+    (*p_outbuf)[1] = length;
+    *p_outbuf += length + 2;
+    return length + 2;
 }
 
 static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf)
@@ -1245,7 +1248,7 @@ static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
     bool start = req->cmd.buf[4] & 1;
     bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */
 
-    if (s->qdev.type == TYPE_ROM && loej) {
+    if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) {
         if (!start && !s->tray_open && s->tray_locked) {
             scsi_check_condition(r,
                                  bdrv_is_inserted(s->qdev.conf.bs)
@@ -1262,13 +1265,239 @@ static int scsi_disk_emulate_start_stop(SCSIDiskReq *r)
     return 0;
 }
 
-static int scsi_disk_emulate_command(SCSIDiskReq *r)
+static void scsi_disk_emulate_read_data(SCSIRequest *req)
 {
-    SCSIRequest *req = &r->req;
+    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+    int buflen = r->iov.iov_len;
+
+    if (buflen) {
+        DPRINTF("Read buf_len=%zd\n", buflen);
+        r->iov.iov_len = 0;
+        r->started = true;
+        scsi_req_data(&r->req, buflen);
+        return;
+    }
+
+    /* This also clears the sense buffer for REQUEST SENSE.  */
+    scsi_req_complete(&r->req, GOOD);
+}
+
+static int scsi_disk_check_mode_select(SCSIDiskState *s, int page,
+                                       uint8_t *inbuf, int inlen)
+{
+    uint8_t mode_current[SCSI_MAX_MODE_LEN];
+    uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
+    uint8_t *p;
+    int len, expected_len, changeable_len, i;
+
+    /* The input buffer does not include the page header, so it is
+     * off by 2 bytes.
+     */
+    expected_len = inlen + 2;
+    if (expected_len > SCSI_MAX_MODE_LEN) {
+        return -1;
+    }
+
+    p = mode_current;
+    memset(mode_current, 0, inlen + 2);
+    len = mode_sense_page(s, page, &p, 0);
+    if (len < 0 || len != expected_len) {
+        return -1;
+    }
+
+    p = mode_changeable;
+    memset(mode_changeable, 0, inlen + 2);
+    changeable_len = mode_sense_page(s, page, &p, 1);
+    assert(changeable_len == len);
+
+    /* Check that unchangeable bits are the same as what MODE SENSE
+     * would return.
+     */
+    for (i = 2; i < len; i++) {
+        if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
+            return -1;
+        }
+    }
+    return 0;
+}
+
+static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p)
+{
+    switch (page) {
+    case MODE_PAGE_CACHING:
+        bdrv_set_enable_write_cache(s->qdev.conf.bs, (p[0] & 4) != 0);
+        break;
+
+    default:
+        break;
+    }
+}
+
+static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change)
+{
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+
+    while (len > 0) {
+        int page, subpage, page_len;
+
+        /* Parse both possible formats for the mode page headers.  */
+        page = p[0] & 0x3f;
+        if (p[0] & 0x40) {
+            if (len < 4) {
+                goto invalid_param_len;
+            }
+            subpage = p[1];
+            page_len = lduw_be_p(&p[2]);
+            p += 4;
+            len -= 4;
+        } else {
+            if (len < 2) {
+                goto invalid_param_len;
+            }
+            subpage = 0;
+            page_len = p[1];
+            p += 2;
+            len -= 2;
+        }
+
+        if (subpage) {
+            goto invalid_param;
+        }
+        if (page_len > len) {
+            goto invalid_param_len;
+        }
+
+        if (!change) {
+            if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) {
+                goto invalid_param;
+            }
+        } else {
+            scsi_disk_apply_mode_select(s, page, p);
+        }
+
+        p += page_len;
+        len -= page_len;
+    }
+    return 0;
+
+invalid_param:
+    scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+    return -1;
+
+invalid_param_len:
+    scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+    return -1;
+}
+
+static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf)
+{
+    uint8_t *p = inbuf;
+    int cmd = r->req.cmd.buf[0];
+    int len = r->req.cmd.xfer;
+    int hdr_len = (cmd == MODE_SELECT ? 4 : 8);
+    int bd_len;
+    int pass;
+
+    /* We only support PF=1, SP=0.  */
+    if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
+        goto invalid_field;
+    }
+
+    if (len < hdr_len) {
+        goto invalid_param_len;
+    }
+
+    bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6]));
+    len -= hdr_len;
+    p += hdr_len;
+    if (len < bd_len) {
+        goto invalid_param_len;
+    }
+    if (bd_len != 0 && bd_len != 8) {
+        goto invalid_param;
+    }
+
+    len -= bd_len;
+    p += bd_len;
+
+    /* Ensure no change is made if there is an error!  */
+    for (pass = 0; pass < 2; pass++) {
+        if (mode_select_pages(r, p, len, pass == 1) < 0) {
+            assert(pass == 0);
+            return;
+        }
+    }
+    scsi_req_complete(&r->req, GOOD);
+    return;
+
+invalid_param:
+    scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+    return;
+
+invalid_param_len:
+    scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+    return;
+
+invalid_field:
+    scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+    return;
+}
+
+static void scsi_disk_emulate_write_data(SCSIRequest *req)
+{
+    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
+
+    if (r->iov.iov_len) {
+        int buflen = r->iov.iov_len;
+        DPRINTF("Write buf_len=%zd\n", buflen);
+        r->iov.iov_len = 0;
+        scsi_req_data(&r->req, buflen);
+        return;
+    }
+
+    switch (req->cmd.buf[0]) {
+    case MODE_SELECT:
+    case MODE_SELECT_10:
+        /* This also clears the sense buffer for REQUEST SENSE.  */
+        scsi_disk_emulate_mode_select(r, r->iov.iov_base);
+        break;
+
+    default:
+        abort();
+    }
+}
+
+static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf)
+{
+    SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
     uint64_t nb_sectors;
     uint8_t *outbuf;
-    int buflen = 0;
+    int buflen;
+
+    switch (req->cmd.buf[0]) {
+    case INQUIRY:
+    case MODE_SENSE:
+    case MODE_SENSE_10:
+    case RESERVE:
+    case RESERVE_10:
+    case RELEASE:
+    case RELEASE_10:
+    case START_STOP:
+    case ALLOW_MEDIUM_REMOVAL:
+    case GET_CONFIGURATION:
+    case GET_EVENT_STATUS_NOTIFICATION:
+    case MECHANISM_STATUS:
+    case REQUEST_SENSE:
+        break;
+
+    default:
+        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
+            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+            return 0;
+        }
+        break;
+    }
 
     if (!r->iov.iov_base) {
         /*
@@ -1286,6 +1515,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
         r->iov.iov_base = qemu_blockalign(s->qdev.conf.bs, r->buflen);
     }
 
+    buflen = req->cmd.xfer;
     outbuf = r->iov.iov_base;
     switch (req->cmd.buf[0]) {
     case TEST_UNIT_READY:
@@ -1332,7 +1562,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
         break;
     case START_STOP:
         if (scsi_disk_emulate_start_stop(r) < 0) {
-            return -1;
+            return 0;
         }
         break;
     case ALLOW_MEDIUM_REMOVAL:
@@ -1448,18 +1678,78 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r)
         }
         DPRINTF("Unsupported Service Action In\n");
         goto illegal_request;
+    case SYNCHRONIZE_CACHE:
+        /* The request is used as the AIO opaque value, so add a ref.  */
+        scsi_req_ref(&r->req);
+        bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
+        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_aio_complete, r);
+        return 0;
+    case SEEK_10:
+        DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
+        if (r->req.cmd.lba > s->qdev.max_lba) {
+            goto illegal_lba;
+        }
+        break;
+    case MODE_SELECT:
+        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
+        break;
+    case MODE_SELECT_10:
+        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
+        break;
+    case WRITE_SAME_10:
+        nb_sectors = lduw_be_p(&req->cmd.buf[7]);
+        goto write_same;
+    case WRITE_SAME_16:
+        nb_sectors = ldl_be_p(&req->cmd.buf[10]) & 0xffffffffULL;
+    write_same:
+        if (bdrv_is_read_only(s->qdev.conf.bs)) {
+            scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
+            return 0;
+        }
+        if (r->req.cmd.lba > s->qdev.max_lba) {
+            goto illegal_lba;
+        }
+
+        /*
+         * We only support WRITE SAME with the unmap bit set for now.
+         */
+        if (!(req->cmd.buf[1] & 0x8)) {
+            goto illegal_request;
+        }
+
+        /* The request is used as the AIO opaque value, so add a ref.  */
+        scsi_req_ref(&r->req);
+        r->req.aiocb = bdrv_aio_discard(s->qdev.conf.bs,
+                                        r->req.cmd.lba * (s->qdev.blocksize / 512),
+                                        nb_sectors * (s->qdev.blocksize / 512),
+                                        scsi_aio_complete, r);
+        return 0;
     default:
+        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
         scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
-        return -1;
+        return 0;
+    }
+    assert(!r->req.aiocb);
+    r->iov.iov_len = MIN(buflen, req->cmd.xfer);
+    if (r->iov.iov_len == 0) {
+        scsi_req_complete(&r->req, GOOD);
+    }
+    if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+        assert(r->iov.iov_len == req->cmd.xfer);
+        return -r->iov.iov_len;
+    } else {
+        return r->iov.iov_len;
     }
-    buflen = MIN(buflen, req->cmd.xfer);
-    return buflen;
 
 illegal_request:
     if (r->req.status == -1) {
         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
     }
-    return -1;
+    return 0;
+
+illegal_lba:
+    scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
+    return 0;
 }
 
 /* Execute a scsi command.  Returns the length of the data expected by the
@@ -1467,99 +1757,37 @@ illegal_request:
    (eg. disk reads), negative for transfers to the device (eg. disk writes),
    and zero if the command does not transfer any data.  */
 
-static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
+static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf)
 {
     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
     int32_t len;
     uint8_t command;
-    int rc;
 
     command = buf[0];
-    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", req->lun, req->tag, buf[0]);
-
-#ifdef DEBUG_SCSI
-    {
-        int i;
-        for (i = 1; i < r->req.cmd.len; i++) {
-            printf(" 0x%02x", buf[i]);
-        }
-        printf("\n");
-    }
-#endif
 
-    switch (command) {
-    case INQUIRY:
-    case MODE_SENSE:
-    case MODE_SENSE_10:
-    case RESERVE:
-    case RESERVE_10:
-    case RELEASE:
-    case RELEASE_10:
-    case START_STOP:
-    case ALLOW_MEDIUM_REMOVAL:
-    case GET_CONFIGURATION:
-    case GET_EVENT_STATUS_NOTIFICATION:
-    case MECHANISM_STATUS:
-    case REQUEST_SENSE:
-        break;
-
-    default:
-        if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
-            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
-            return 0;
-        }
-        break;
+    if (s->tray_open || !bdrv_is_inserted(s->qdev.conf.bs)) {
+        scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+        return 0;
     }
 
     switch (command) {
-    case TEST_UNIT_READY:
-    case INQUIRY:
-    case MODE_SENSE:
-    case MODE_SENSE_10:
-    case RESERVE:
-    case RESERVE_10:
-    case RELEASE:
-    case RELEASE_10:
-    case START_STOP:
-    case ALLOW_MEDIUM_REMOVAL:
-    case READ_CAPACITY_10:
-    case READ_TOC:
-    case READ_DISC_INFORMATION:
-    case READ_DVD_STRUCTURE:
-    case GET_CONFIGURATION:
-    case GET_EVENT_STATUS_NOTIFICATION:
-    case MECHANISM_STATUS:
-    case SERVICE_ACTION_IN_16:
-    case REQUEST_SENSE:
-        rc = scsi_disk_emulate_command(r);
-        if (rc < 0) {
-            return 0;
-        }
-
-        r->iov.iov_len = rc;
-        break;
-    case SYNCHRONIZE_CACHE:
-        /* The request is used as the AIO opaque value, so add a ref.  */
-        scsi_req_ref(&r->req);
-        bdrv_acct_start(s->qdev.conf.bs, &r->acct, 0, BDRV_ACCT_FLUSH);
-        r->req.aiocb = bdrv_aio_flush(s->qdev.conf.bs, scsi_flush_complete, r);
-        return 0;
     case READ_6:
     case READ_10:
     case READ_12:
     case READ_16:
         len = r->req.cmd.xfer / s->qdev.blocksize;
         DPRINTF("Read (sector %" PRId64 ", count %d)\n", r->req.cmd.lba, len);
-        if (r->req.cmd.lba > s->qdev.max_lba) {
+        if (r->req.cmd.buf[1] & 0xe0) {
+            goto illegal_request;
+        }
+        if (r->req.cmd.lba > r->req.cmd.lba + len ||
+            r->req.cmd.lba + len - 1 > s->qdev.max_lba) {
             goto illegal_lba;
         }
         r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
         r->sector_count = len * (s->qdev.blocksize / 512);
         break;
-    case VERIFY_10:
-    case VERIFY_12:
-    case VERIFY_16:
     case WRITE_6:
     case WRITE_10:
     case WRITE_12:
@@ -1567,90 +1795,45 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf)
     case WRITE_VERIFY_10:
     case WRITE_VERIFY_12:
     case WRITE_VERIFY_16:
+        if (bdrv_is_read_only(s->qdev.conf.bs)) {
+            scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
+            return 0;
+        }
+        /* fallthrough */
+    case VERIFY_10:
+    case VERIFY_12:
+    case VERIFY_16:
         len = r->req.cmd.xfer / s->qdev.blocksize;
         DPRINTF("Write %s(sector %" PRId64 ", count %d)\n",
                 (command & 0xe) == 0xe ? "And Verify " : "",
                 r->req.cmd.lba, len);
-        if (r->req.cmd.lba > s->qdev.max_lba) {
+        if (r->req.cmd.buf[1] & 0xe0) {
+            goto illegal_request;
+        }
+        if (r->req.cmd.lba > r->req.cmd.lba + len ||
+            r->req.cmd.lba + len - 1 > s->qdev.max_lba) {
             goto illegal_lba;
         }
         r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
         r->sector_count = len * (s->qdev.blocksize / 512);
         break;
-    case MODE_SELECT:
-        DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
-        /* We don't support mode parameter changes.
-           Allow the mode parameter header + block descriptors only. */
-        if (r->req.cmd.xfer > 12) {
-            goto fail;
-        }
-        break;
-    case MODE_SELECT_10:
-        DPRINTF("Mode Select(10) (len %lu)\n", (long)r->req.cmd.xfer);
-        /* We don't support mode parameter changes.
-           Allow the mode parameter header + block descriptors only. */
-        if (r->req.cmd.xfer > 16) {
-            goto fail;
-        }
-        break;
-    case SEEK_10:
-        DPRINTF("Seek(10) (sector %" PRId64 ")\n", r->req.cmd.lba);
-        if (r->req.cmd.lba > s->qdev.max_lba) {
-            goto illegal_lba;
-        }
-        break;
-    case WRITE_SAME_10:
-        len = lduw_be_p(&buf[7]);
-        goto write_same;
-    case WRITE_SAME_16:
-        len = ldl_be_p(&buf[10]) & 0xffffffffULL;
-    write_same:
-
-        DPRINTF("WRITE SAME() (sector %" PRId64 ", count %d)\n",
-                r->req.cmd.lba, len);
-
-        if (r->req.cmd.lba > s->qdev.max_lba) {
-            goto illegal_lba;
-        }
-
-        /*
-         * We only support WRITE SAME with the unmap bit set for now.
-         */
-        if (!(buf[1] & 0x8)) {
-            goto fail;
-        }
-
-        rc = bdrv_discard(s->qdev.conf.bs,
-                          r->req.cmd.lba * (s->qdev.blocksize / 512),
-                          len * (s->qdev.blocksize / 512));
-        if (rc < 0) {
-            /* XXX: better error code ?*/
-            goto fail;
-        }
-
-        break;
     default:
-        DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
-        scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
-        return 0;
-    fail:
+        abort();
+    illegal_request:
         scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
         return 0;
     illegal_lba:
         scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
         return 0;
     }
-    if (r->sector_count == 0 && r->iov.iov_len == 0) {
+    if (r->sector_count == 0) {
         scsi_req_complete(&r->req, GOOD);
     }
-    len = r->sector_count * 512 + r->iov.iov_len;
+    assert(r->iov.iov_len == 0);
     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
-        return -len;
+        return -r->sector_count * 512;
     } else {
-        if (!r->sector_count) {
-            r->sector_count = -1;
-        }
-        return len;
+        return r->sector_count * 512;
     }
 }
 
@@ -1677,6 +1860,19 @@ static void scsi_destroy(SCSIDevice *dev)
     blockdev_mark_auto_del(s->qdev.conf.bs);
 }
 
+static void scsi_disk_resize_cb(void *opaque)
+{
+    SCSIDiskState *s = opaque;
+
+    /* SPC lists this sense code as available only for
+     * direct-access devices.
+     */
+    if (s->qdev.type == TYPE_DISK) {
+        scsi_device_set_ua(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
+        scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED));
+    }
+}
+
 static void scsi_cd_change_media_cb(void *opaque, bool load)
 {
     SCSIDiskState *s = opaque;
@@ -1693,7 +1889,7 @@ static void scsi_cd_change_media_cb(void *opaque, bool load)
      */
     s->media_changed = load;
     s->tray_open = !load;
-    s->qdev.unit_attention = SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM);
+    scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM));
     s->media_event = true;
     s->eject_request = false;
 }
@@ -1718,11 +1914,17 @@ static bool scsi_cd_is_medium_locked(void *opaque)
     return ((SCSIDiskState *)opaque)->tray_locked;
 }
 
-static const BlockDevOps scsi_cd_block_ops = {
+static const BlockDevOps scsi_disk_removable_block_ops = {
     .change_media_cb = scsi_cd_change_media_cb,
     .eject_request_cb = scsi_cd_eject_request_cb,
     .is_tray_open = scsi_cd_is_tray_open,
     .is_medium_locked = scsi_cd_is_medium_locked,
+
+    .resize_cb = scsi_disk_resize_cb,
+};
+
+static const BlockDevOps scsi_disk_block_ops = {
+    .resize_cb = scsi_disk_resize_cb,
 };
 
 static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
@@ -1730,7 +1932,7 @@ static void scsi_disk_unit_attention_reported(SCSIDevice *dev)
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     if (s->media_changed) {
         s->media_changed = false;
-        s->qdev.unit_attention = SENSE_CODE(MEDIUM_CHANGED);
+        scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED));
     }
 }
 
@@ -1757,6 +1959,9 @@ static int scsi_initfn(SCSIDevice *dev)
     if (!s->version) {
         s->version = g_strdup(qemu_get_version());
     }
+    if (!s->vendor) {
+        s->vendor = g_strdup("QEMU");
+    }
 
     if (bdrv_is_sg(s->qdev.conf.bs)) {
         error_report("unwanted /dev/sg*");
@@ -1764,7 +1969,9 @@ static int scsi_initfn(SCSIDevice *dev)
     }
 
     if (s->features & (1 << SCSI_DISK_F_REMOVABLE)) {
-        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_cd_block_ops, s);
+        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_removable_block_ops, s);
+    } else {
+        bdrv_set_dev_ops(s->qdev.conf.bs, &scsi_disk_block_ops, s);
     }
     bdrv_set_buffer_alignment(s->qdev.conf.bs, s->qdev.blocksize);
 
@@ -1778,6 +1985,9 @@ static int scsi_hd_initfn(SCSIDevice *dev)
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
     s->qdev.blocksize = s->qdev.conf.logical_block_size;
     s->qdev.type = TYPE_DISK;
+    if (!s->product) {
+        s->product = g_strdup("QEMU HARDDISK");
+    }
     return scsi_initfn(&s->qdev);
 }
 
@@ -1787,6 +1997,9 @@ static int scsi_cd_initfn(SCSIDevice *dev)
     s->qdev.blocksize = 2048;
     s->qdev.type = TYPE_ROM;
     s->features |= 1 << SCSI_DISK_F_REMOVABLE;
+    if (!s->product) {
+        s->product = g_strdup("QEMU CD-ROM");
+    }
     return scsi_initfn(&s->qdev);
 }
 
@@ -1806,10 +2019,19 @@ static int scsi_disk_initfn(SCSIDevice *dev)
     }
 }
 
-static const SCSIReqOps scsi_disk_reqops = {
+static const SCSIReqOps scsi_disk_emulate_reqops = {
     .size         = sizeof(SCSIDiskReq),
     .free_req     = scsi_free_request,
-    .send_command = scsi_send_command,
+    .send_command = scsi_disk_emulate_command,
+    .read_data    = scsi_disk_emulate_read_data,
+    .write_data   = scsi_disk_emulate_write_data,
+    .get_buf      = scsi_get_buf,
+};
+
+static const SCSIReqOps scsi_disk_dma_reqops = {
+    .size         = sizeof(SCSIDiskReq),
+    .free_req     = scsi_free_request,
+    .send_command = scsi_disk_dma_command,
     .read_data    = scsi_read_data,
     .write_data   = scsi_write_data,
     .cancel_io    = scsi_cancel_io,
@@ -1818,13 +2040,70 @@ static const SCSIReqOps scsi_disk_reqops = {
     .save_request = scsi_disk_save_request,
 };
 
+static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = {
+    [TEST_UNIT_READY]                 = &scsi_disk_emulate_reqops,
+    [INQUIRY]                         = &scsi_disk_emulate_reqops,
+    [MODE_SENSE]                      = &scsi_disk_emulate_reqops,
+    [MODE_SENSE_10]                   = &scsi_disk_emulate_reqops,
+    [START_STOP]                      = &scsi_disk_emulate_reqops,
+    [ALLOW_MEDIUM_REMOVAL]            = &scsi_disk_emulate_reqops,
+    [READ_CAPACITY_10]                = &scsi_disk_emulate_reqops,
+    [READ_TOC]                        = &scsi_disk_emulate_reqops,
+    [READ_DVD_STRUCTURE]              = &scsi_disk_emulate_reqops,
+    [READ_DISC_INFORMATION]           = &scsi_disk_emulate_reqops,
+    [GET_CONFIGURATION]               = &scsi_disk_emulate_reqops,
+    [GET_EVENT_STATUS_NOTIFICATION]   = &scsi_disk_emulate_reqops,
+    [MECHANISM_STATUS]                = &scsi_disk_emulate_reqops,
+    [SERVICE_ACTION_IN_16]            = &scsi_disk_emulate_reqops,
+    [REQUEST_SENSE]                   = &scsi_disk_emulate_reqops,
+    [SYNCHRONIZE_CACHE]               = &scsi_disk_emulate_reqops,
+    [SEEK_10]                         = &scsi_disk_emulate_reqops,
+    [MODE_SELECT]                     = &scsi_disk_emulate_reqops,
+    [MODE_SELECT_10]                  = &scsi_disk_emulate_reqops,
+    [WRITE_SAME_10]                   = &scsi_disk_emulate_reqops,
+    [WRITE_SAME_16]                   = &scsi_disk_emulate_reqops,
+
+    [READ_6]                          = &scsi_disk_dma_reqops,
+    [READ_10]                         = &scsi_disk_dma_reqops,
+    [READ_12]                         = &scsi_disk_dma_reqops,
+    [READ_16]                         = &scsi_disk_dma_reqops,
+    [VERIFY_10]                       = &scsi_disk_dma_reqops,
+    [VERIFY_12]                       = &scsi_disk_dma_reqops,
+    [VERIFY_16]                       = &scsi_disk_dma_reqops,
+    [WRITE_6]                         = &scsi_disk_dma_reqops,
+    [WRITE_10]                        = &scsi_disk_dma_reqops,
+    [WRITE_12]                        = &scsi_disk_dma_reqops,
+    [WRITE_16]                        = &scsi_disk_dma_reqops,
+    [WRITE_VERIFY_10]                 = &scsi_disk_dma_reqops,
+    [WRITE_VERIFY_12]                 = &scsi_disk_dma_reqops,
+    [WRITE_VERIFY_16]                 = &scsi_disk_dma_reqops,
+};
+
 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
                                      uint8_t *buf, void *hba_private)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
     SCSIRequest *req;
+    const SCSIReqOps *ops;
+    uint8_t command;
+
+#ifdef DEBUG_SCSI
+    DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, buf[0]);
+    {
+        int i;
+        for (i = 1; i < r->req.cmd.len; i++) {
+            printf(" 0x%02x", buf[i]);
+        }
+        printf("\n");
+    }
+#endif
 
-    req = scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun, hba_private);
+    command = buf[0];
+    ops = scsi_disk_reqops_dispatch[command];
+    if (!ops) {
+        ops = &scsi_disk_emulate_reqops;
+    }
+    req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private);
     return req;
 }
 
@@ -1938,15 +2217,14 @@ static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
          * unreliable, too.  It is even possible that reads deliver random data
          * from the host page cache (this is probably a Linux bug).
          *
-         * We might use scsi_disk_reqops as long as no writing commands are
+         * We might use scsi_disk_dma_reqops as long as no writing commands are
          * seen, but performance usually isn't paramount on optical media.  So,
          * just make scsi-block operate the same as scsi-generic for them.
          */
-        if (s->qdev.type == TYPE_ROM) {
-            break;
-	}
-        return scsi_req_alloc(&scsi_disk_reqops, &s->qdev, tag, lun,
-                              hba_private);
+        if (s->qdev.type != TYPE_ROM) {
+            return scsi_req_alloc(&scsi_disk_dma_reqops, &s->qdev, tag, lun,
+                                  hba_private);
+        }
     }
 
     return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun,
@@ -1954,10 +2232,12 @@ static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag,
 }
 #endif
 
-#define DEFINE_SCSI_DISK_PROPERTIES()                           \
-    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
-    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
-    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)
+#define DEFINE_SCSI_DISK_PROPERTIES()                                \
+    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),               \
+    DEFINE_PROP_STRING("ver", SCSIDiskState, version),               \
+    DEFINE_PROP_STRING("serial", SCSIDiskState, serial),             \
+    DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor),             \
+    DEFINE_PROP_STRING("product", SCSIDiskState, product)
 
 static Property scsi_hd_properties[] = {
     DEFINE_SCSI_DISK_PROPERTIES(),
@@ -2040,7 +2320,7 @@ static TypeInfo scsi_cd_info = {
 
 #ifdef __linux__
 static Property scsi_block_properties[] = {
-    DEFINE_SCSI_DISK_PROPERTIES(),
+    DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.bs),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/scsi.h b/hw/scsi.h
index ea8a155..1aeee46 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -131,6 +131,9 @@ struct SCSIBusInfo {
     void (*transfer_data)(SCSIRequest *req, uint32_t arg);
     void (*complete)(SCSIRequest *req, uint32_t arg, size_t resid);
     void (*cancel)(SCSIRequest *req);
+    void (*hotplug)(SCSIBus *bus, SCSIDevice *dev);
+    void (*hot_unplug)(SCSIBus *bus, SCSIDevice *dev);
+    void (*change)(SCSIBus *bus, SCSIDevice *dev, SCSISense sense);
     QEMUSGList *(*get_sg_list)(SCSIRequest *req);
 
     void (*save_request)(QEMUFile *f, SCSIRequest *req);
@@ -180,6 +183,10 @@ extern const struct SCSISense sense_code_INVALID_OPCODE;
 extern const struct SCSISense sense_code_LBA_OUT_OF_RANGE;
 /* Illegal request, Invalid field in CDB */
 extern const struct SCSISense sense_code_INVALID_FIELD;
+/* Illegal request, Invalid field in parameter list */
+extern const struct SCSISense sense_code_INVALID_PARAM;
+/* Illegal request, Parameter list length error */
+extern const struct SCSISense sense_code_INVALID_PARAM_LEN;
 /* Illegal request, LUN not supported */
 extern const struct SCSISense sense_code_LUN_NOT_SUPPORTED;
 /* Illegal request, Saving parameters not supported */
@@ -194,6 +201,8 @@ extern const struct SCSISense sense_code_IO_ERROR;
 extern const struct SCSISense sense_code_I_T_NEXUS_LOSS;
 /* Command aborted, Logical Unit failure */
 extern const struct SCSISense sense_code_LUN_FAILURE;
+/* LUN not ready, Capacity data has changed */
+extern const struct SCSISense sense_code_CAPACITY_CHANGED;
 /* LUN not ready, Medium not present */
 extern const struct SCSISense sense_code_UNIT_ATTENTION_NO_MEDIUM;
 /* Unit attention, Power on, reset or bus device reset occurred */
@@ -204,6 +213,8 @@ extern const struct SCSISense sense_code_MEDIUM_CHANGED;
 extern const struct SCSISense sense_code_REPORTED_LUNS_CHANGED;
 /* Unit attention, Device internal reset */
 extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET;
+/* Data Protection, Write Protected */
+extern const struct SCSISense sense_code_WRITE_PROTECTED;
 
 #define SENSE_CODE(x) sense_code_ ## x
 
@@ -231,6 +242,8 @@ void scsi_req_abort(SCSIRequest *req, int status);
 void scsi_req_cancel(SCSIRequest *req);
 void scsi_req_retry(SCSIRequest *req);
 void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense);
+void scsi_device_set_ua(SCSIDevice *sdev, SCSISense sense);
+void scsi_device_report_change(SCSIDevice *dev, SCSISense sense);
 int scsi_device_get_sense(SCSIDevice *dev, uint8_t *buf, int len, bool fixed);
 SCSIDevice *scsi_device_find(SCSIBus *bus, int channel, int target, int lun);
 
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 4e03f0b..1109467 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -1023,7 +1023,9 @@ static int virtio_scsi_init_pci(PCIDevice *pci_dev)
         return -EINVAL;
     }
 
-    vdev->nvectors = proxy->nvectors;
+    vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
+                                        ? proxy->scsi.num_queues + 3
+                                        : proxy->nvectors;
     virtio_init_pci(proxy, vdev);
 
     /* make the actual value visible */
@@ -1040,7 +1042,8 @@ static int virtio_scsi_exit_pci(PCIDevice *pci_dev)
 }
 
 static Property virtio_scsi_properties[] = {
-    DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+    DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
+    DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED),
     DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi),
     DEFINE_PROP_END_OF_LIST(),
 };
diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index 0a5ac40..c4a5b22 100644
--- a/hw/virtio-scsi.c
+++ b/hw/virtio-scsi.c
@@ -24,6 +24,11 @@
 #define VIRTIO_SCSI_MAX_TARGET  255
 #define VIRTIO_SCSI_MAX_LUN     16383
 
+/* Feature Bits */
+#define VIRTIO_SCSI_F_INOUT                    0
+#define VIRTIO_SCSI_F_HOTPLUG                  1
+#define VIRTIO_SCSI_F_CHANGE                   2
+
 /* Response codes */
 #define VIRTIO_SCSI_S_OK                       0
 #define VIRTIO_SCSI_S_OVERRUN                  1
@@ -59,6 +64,12 @@
 #define VIRTIO_SCSI_T_NO_EVENT                 0
 #define VIRTIO_SCSI_T_TRANSPORT_RESET          1
 #define VIRTIO_SCSI_T_ASYNC_NOTIFY             2
+#define VIRTIO_SCSI_T_PARAM_CHANGE             3
+
+/* Reasons for transport reset event */
+#define VIRTIO_SCSI_EVT_RESET_HARD             0
+#define VIRTIO_SCSI_EVT_RESET_RESCAN           1
+#define VIRTIO_SCSI_EVT_RESET_REMOVED          2
 
 /* SCSI command request, followed by data-out */
 typedef struct {
@@ -132,6 +143,7 @@ typedef struct {
     uint32_t sense_size;
     uint32_t cdb_size;
     int resetting;
+    bool events_dropped;
     VirtQueue *ctrl_vq;
     VirtQueue *event_vq;
     VirtQueue *cmd_vqs[0];
@@ -206,11 +218,13 @@ static void qemu_sgl_init_external(QEMUSGList *qsgl, struct iovec *sg,
 static void virtio_scsi_parse_req(VirtIOSCSI *s, VirtQueue *vq,
                                   VirtIOSCSIReq *req)
 {
-    assert(req->elem.out_num && req->elem.in_num);
+    assert(req->elem.in_num);
     req->vq = vq;
     req->dev = s;
     req->sreq = NULL;
-    req->req.buf = req->elem.out_sg[0].iov_base;
+    if (req->elem.out_num) {
+        req->req.buf = req->elem.out_sg[0].iov_base;
+    }
     req->resp.buf = req->elem.in_sg[0].iov_base;
 
     if (req->elem.out_num > 1) {
@@ -405,10 +419,6 @@ static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
     }
 }
 
-static void virtio_scsi_handle_event(VirtIODevice *vdev, VirtQueue *vq)
-{
-}
-
 static void virtio_scsi_command_complete(SCSIRequest *r, uint32_t status,
                                          size_t resid)
 {
@@ -545,6 +555,8 @@ static void virtio_scsi_set_config(VirtIODevice *vdev,
 static uint32_t virtio_scsi_get_features(VirtIODevice *vdev,
                                          uint32_t requested_features)
 {
+    requested_features |= (1UL << VIRTIO_SCSI_F_HOTPLUG);
+    requested_features |= (1UL << VIRTIO_SCSI_F_CHANGE);
     return requested_features;
 }
 
@@ -554,6 +566,7 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
 
     s->sense_size = VIRTIO_SCSI_SENSE_SIZE;
     s->cdb_size = VIRTIO_SCSI_CDB_SIZE;
+    s->events_dropped = false;
 }
 
 /* The device does not have anything to save beyond the virtio data.
@@ -577,6 +590,93 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
     return 0;
 }
 
+static void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
+                                   uint32_t event, uint32_t reason)
+{
+    VirtIOSCSIReq *req = virtio_scsi_pop_req(s, s->event_vq);
+    VirtIOSCSIEvent *evt;
+    int in_size;
+
+    if (!req) {
+        s->events_dropped = true;
+        return;
+    }
+
+    if (req->elem.out_num || req->elem.in_num != 1) {
+        virtio_scsi_bad_req();
+    }
+
+    if (s->events_dropped) {
+        event |= VIRTIO_SCSI_T_EVENTS_MISSED;
+        s->events_dropped = false;
+    }
+
+    in_size = req->elem.in_sg[0].iov_len;
+    if (in_size < sizeof(VirtIOSCSIEvent)) {
+        virtio_scsi_bad_req();
+    }
+
+    evt = req->resp.event;
+    memset(evt, 0, sizeof(VirtIOSCSIEvent));
+    evt->event = event;
+    evt->reason = reason;
+    if (!dev) {
+        assert(event == VIRTIO_SCSI_T_NO_EVENT);
+    } else {
+        evt->lun[0] = 1;
+        evt->lun[1] = dev->id;
+
+        /* Linux wants us to keep the same encoding we use for REPORT LUNS.  */
+        if (dev->lun >= 256) {
+            evt->lun[2] = (dev->lun >> 8) | 0x40;
+        }
+        evt->lun[3] = dev->lun & 0xFF;
+    }
+    virtio_scsi_complete_req(req);
+}
+
+static void virtio_scsi_handle_event(VirtIODevice *vdev, VirtQueue *vq)
+{
+    VirtIOSCSI *s = (VirtIOSCSI *)vdev;
+
+    if (s->events_dropped) {
+        virtio_scsi_push_event(s, NULL, VIRTIO_SCSI_T_NO_EVENT, 0);
+    }
+}
+
+static void virtio_scsi_change(SCSIBus *bus, SCSIDevice *dev, SCSISense sense)
+{
+    VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
+
+    if (((s->vdev.guest_features >> VIRTIO_SCSI_F_CHANGE) & 1) &&
+        (s->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK) &&
+        dev->type != TYPE_ROM) {
+        virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_PARAM_CHANGE,
+                               sense.asc | (sense.ascq << 8));
+    }
+}
+
+static void virtio_scsi_hotplug(SCSIBus *bus, SCSIDevice *dev)
+{
+    VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
+
+    if (((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) &&
+        (s->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)) {
+        virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
+                               VIRTIO_SCSI_EVT_RESET_RESCAN);
+    }
+}
+
+static void virtio_scsi_hot_unplug(SCSIBus *bus, SCSIDevice *dev)
+{
+    VirtIOSCSI *s = container_of(bus, VirtIOSCSI, bus);
+
+    if ((s->vdev.guest_features >> VIRTIO_SCSI_F_HOTPLUG) & 1) {
+        virtio_scsi_push_event(s, dev, VIRTIO_SCSI_T_TRANSPORT_RESET,
+                               VIRTIO_SCSI_EVT_RESET_REMOVED);
+    }
+}
+
 static struct SCSIBusInfo virtio_scsi_scsi_info = {
     .tcq = true,
     .max_channel = VIRTIO_SCSI_MAX_CHANNEL,
@@ -585,6 +685,9 @@ static struct SCSIBusInfo virtio_scsi_scsi_info = {
 
     .complete = virtio_scsi_command_complete,
     .cancel = virtio_scsi_request_cancelled,
+    .change = virtio_scsi_change,
+    .hotplug = virtio_scsi_hotplug,
+    .hot_unplug = virtio_scsi_hot_unplug,
     .get_sg_list = virtio_scsi_get_sg_list,
     .save_request = virtio_scsi_save_request,
     .load_request = virtio_scsi_load_request,