Merge remote-tracking branch 'kraxel/usb.44' into staging

* kraxel/usb.44:
  Endian fix an assertion in usb-msd
  uhci: alloc can't fail, drop check.
  uhci: new uhci_handle_td return code for tds still in flight
  uhci: renumber uhci_handle_td return codes
  uhci: use enum for uhci_handle_td return codes
  uhci: tracing support
  uhci: cancel on schedule stop.
  uhci: fix uhci_async_cancel_all
  uhci: pass addr to uhci_async_alloc
  usb: improve packet state sanity checks
  usb-ohci: DMA writeback bug fixes
  usb-ehci: drop unused isoch_pause variable
  usb: zap hw/ush-{ohic,uhci}.h + init wrappers
  usb: the big rename

35 files changed, 4270 insertions, 201 deletions

diff --git a/hw/alpha_sys.h b/hw/alpha_sys.h
index d54b18f..f9506c6 100644
--- a/hw/alpha_sys.h
+++ b/hw/alpha_sys.h
@@ -8,7 +8,6 @@
 #include "ide.h"
 #include "net.h"
 #include "pc.h"
-#include "usb-ohci.h"
 #include "irq.h"
 
 
diff --git a/hw/mips_fulong2e.c b/hw/mips_fulong2e.c
index e3ba9dd..efdfdc2 100644
--- a/hw/mips_fulong2e.c
+++ b/hw/mips_fulong2e.c
@@ -29,7 +29,6 @@
 #include "mips.h"
 #include "mips_cpudevs.h"
 #include "pci.h"
-#include "usb-uhci.h"
 #include "qemu-char.h"
 #include "sysemu.h"
 #include "audio/audio.h"
@@ -355,8 +354,10 @@ static void mips_fulong2e_init(ram_addr_t ram_size, const char *boot_device,
     isa_bus_irqs(isa_bus, i8259);
 
     vt82c686b_ide_init(pci_bus, hd, PCI_DEVFN(FULONG2E_VIA_SLOT, 1));
-    usb_uhci_vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2));
-    usb_uhci_vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3));
+    pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2),
+                      "vt82c686b-usb-uhci");
+    pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3),
+                      "vt82c686b-usb-uhci");
 
     smbus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 4),
                               0xeee1, NULL);
diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index b1563ed..866699d 100644
--- a/hw/mips_malta.c
+++ b/hw/mips_malta.c
@@ -33,7 +33,6 @@
 #include "mips.h"
 #include "mips_cpudevs.h"
 #include "pci.h"
-#include "usb-uhci.h"
 #include "vmware_vga.h"
 #include "qemu-char.h"
 #include "sysemu.h"
@@ -965,7 +964,7 @@ void mips_malta_init (ram_addr_t ram_size,
 
     isa_bus_irqs(isa_bus, s->i8259);
     pci_piix4_ide_init(pci_bus, hd, piix4_devfn + 1);
-    usb_uhci_piix4_init(pci_bus, piix4_devfn + 2);
+    pci_create_simple(pci_bus, piix4_devfn + 2, "piix4-usb-uhci");
     smbus = piix4_pm_init(pci_bus, piix4_devfn + 3, 0x1100,
                           isa_get_irq(NULL, 9), NULL, 0);
     /* TODO: Populate SPD eeprom data.  */
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index 6c5c40f..3f99f9a 100644
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -28,8 +28,6 @@
 #include "pc.h"
 #include "apic.h"
 #include "pci.h"
-#include "usb-uhci.h"
-#include "usb-ohci.h"
 #include "net.h"
 #include "boards.h"
 #include "ide.h"
@@ -284,7 +282,7 @@ static void pc_init1(MemoryRegion *system_memory,
                  floppy, idebus[0], idebus[1], rtc_state);
 
     if (pci_enabled && usb_enabled) {
-        usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+        pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
     }
 
     if (pci_enabled && acpi_enabled) {
diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
index 506187b..2fec5b4 100644
--- a/hw/ppc_newworld.c
+++ b/hw/ppc_newworld.c
@@ -54,7 +54,6 @@
 #include "nvram.h"
 #include "pc.h"
 #include "pci.h"
-#include "usb-ohci.h"
 #include "net.h"
 #include "sysemu.h"
 #include "boards.h"
@@ -352,7 +351,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
                dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
 
     if (usb_enabled) {
-        usb_ohci_init_pci(pci_bus, -1);
+        pci_create_simple(pci_bus, -1, "pci-ohci");
     }
 
     /* U3 needs to use USB for input because Linux doesn't support via-cuda
diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
index 9295a34..49c2c97 100644
--- a/hw/ppc_oldworld.c
+++ b/hw/ppc_oldworld.c
@@ -34,7 +34,6 @@
 #include "net.h"
 #include "isa.h"
 #include "pci.h"
-#include "usb-ohci.h"
 #include "boards.h"
 #include "fw_cfg.h"
 #include "escc.h"
@@ -278,7 +277,7 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
                dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
 
     if (usb_enabled) {
-        usb_ohci_init_pci(pci_bus, -1);
+        pci_create_simple(pci_bus, -1, "pci-ohci");
     }
 
     if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
index eb43fb5..dc9edd7 100644
--- a/hw/ppc_prep.c
+++ b/hw/ppc_prep.c
@@ -30,7 +30,6 @@
 #include "isa.h"
 #include "pci.h"
 #include "pci_host.h"
-#include "usb-ohci.h"
 #include "ppc.h"
 #include "boards.h"
 #include "qemu-log.h"
@@ -688,7 +687,7 @@ static void ppc_prep_init (ram_addr_t ram_size,
 #endif
 
     if (usb_enabled) {
-        usb_ohci_init_pci(pci_bus, -1);
+        pci_create_simple(pci_bus, -1, "pci-ohci");
     }
 
     m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59);
diff --git a/hw/realview.c b/hw/realview.c
index ae1bbcd..50ea67c 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -12,7 +12,6 @@
 #include "primecell.h"
 #include "devices.h"
 #include "pci.h"
-#include "usb-ohci.h"
 #include "net.h"
 #include "sysemu.h"
 #include "boards.h"
@@ -305,7 +304,7 @@ static void realview_init(ram_addr_t ram_size,
         sysbus_connect_irq(busdev, 3, pic[51]);
         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
         if (usb_enabled) {
-            usb_ohci_init_pci(pci_bus, -1);
+            pci_create_simple(pci_bus, -1, "pci-ohci");
         }
         n = drive_get_max_bus(IF_SCSI);
         while (n >= 0) {
diff --git a/hw/usb-ohci.h b/hw/usb-ohci.h
deleted file mode 100644
index eefcef3..0000000
--- a/hw/usb-ohci.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef QEMU_USB_OHCI_H
-#define QEMU_USB_OHCI_H
-
-#include "qemu-common.h"
-
-void usb_ohci_init_pci(struct PCIBus *bus, int devfn);
-
-#endif
-
diff --git a/hw/usb-uhci.h b/hw/usb-uhci.h
deleted file mode 100644
index 3e4d377..0000000
--- a/hw/usb-uhci.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef QEMU_USB_UHCI_H
-#define QEMU_USB_UHCI_H
-
-#include "qemu-common.h"
-
-void usb_uhci_piix3_init(PCIBus *bus, int devfn);
-void usb_uhci_piix4_init(PCIBus *bus, int devfn);
-void usb_uhci_vt82c686b_init(PCIBus *bus, int devfn);
-
-#endif
diff --git a/hw/usb.h b/hw/usb.h
index d60d03d..e95085f 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -336,6 +336,7 @@ struct USBPacket {
 
 void usb_packet_init(USBPacket *p);
 void usb_packet_set_state(USBPacket *p, USBPacketState state);
+void usb_packet_check_state(USBPacket *p, USBPacketState expected);
 void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep);
 void usb_packet_addbuf(USBPacket *p, void *ptr, size_t len);
 int usb_packet_map(USBPacket *p, QEMUSGList *sgl);
diff --git a/hw/usb-bus.c b/hw/usb/bus.c
index 70b7ebc..d3f8358 100644
--- a/hw/usb-bus.c
+++ b/hw/usb/bus.c
@@ -1,6 +1,6 @@
-#include "hw.h"
-#include "usb.h"
-#include "qdev.h"
+#include "hw/hw.h"
+#include "hw/usb.h"
+#include "hw/qdev.h"
 #include "sysemu.h"
 #include "monitor.h"
 #include "trace.h"
diff --git a/hw/usb.c b/hw/usb/core.c
index 1ec2e90..a4048fe 100644
--- a/hw/usb.c
+++ b/hw/usb/core.c
@@ -24,7 +24,7 @@
  * THE SOFTWARE.
  */
 #include "qemu-common.h"
-#include "usb.h"
+#include "hw/usb.h"
 #include "iov.h"
 #include "trace.h"
 
@@ -378,7 +378,7 @@ int usb_handle_packet(USBDevice *dev, USBPacket *p)
     }
     assert(dev == p->ep->dev);
     assert(dev->state == USB_STATE_DEFAULT);
-    assert(p->state == USB_PACKET_SETUP);
+    usb_packet_check_state(p, USB_PACKET_SETUP);
     assert(p->ep != NULL);
 
     if (QTAILQ_EMPTY(&p->ep->queue) || p->ep->pipeline) {
@@ -406,7 +406,7 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
     USBEndpoint *ep = p->ep;
     int ret;
 
-    assert(p->state == USB_PACKET_ASYNC);
+    usb_packet_check_state(p, USB_PACKET_ASYNC);
     assert(QTAILQ_FIRST(&ep->queue) == p);
     usb_packet_set_state(p, USB_PACKET_COMPLETE);
     QTAILQ_REMOVE(&ep->queue, p, queue);
@@ -417,7 +417,7 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
         if (p->state == USB_PACKET_ASYNC) {
             break;
         }
-        assert(p->state == USB_PACKET_QUEUED);
+        usb_packet_check_state(p, USB_PACKET_QUEUED);
         ret = usb_process_one(p);
         if (ret == USB_RET_ASYNC) {
             usb_packet_set_state(p, USB_PACKET_ASYNC);
@@ -450,7 +450,7 @@ void usb_packet_init(USBPacket *p)
     qemu_iovec_init(&p->iov, 1);
 }
 
-void usb_packet_set_state(USBPacket *p, USBPacketState state)
+static const char *usb_packet_state_name(USBPacketState state)
 {
     static const char *name[] = {
         [USB_PACKET_UNDEFINED] = "undef",
@@ -460,11 +460,36 @@ void usb_packet_set_state(USBPacket *p, USBPacketState state)
         [USB_PACKET_COMPLETE]  = "complete",
         [USB_PACKET_CANCELED]  = "canceled",
     };
+    if (state < ARRAY_SIZE(name)) {
+        return name[state];
+    }
+    return "INVALID";
+}
+
+void usb_packet_check_state(USBPacket *p, USBPacketState expected)
+{
+    USBDevice *dev;
+    USBBus *bus;
+
+    if (p->state == expected) {
+        return;
+    }
+    dev = p->ep->dev;
+    bus = usb_bus_from_device(dev);
+    trace_usb_packet_state_fault(bus->busnr, dev->port->path, p->ep->nr, p,
+                                 usb_packet_state_name(p->state),
+                                 usb_packet_state_name(expected));
+    assert(!"usb packet state check failed");
+}
+
+void usb_packet_set_state(USBPacket *p, USBPacketState state)
+{
     USBDevice *dev = p->ep->dev;
     USBBus *bus = usb_bus_from_device(dev);
 
-    trace_usb_packet_state_change(bus->busnr, dev->port->path, p->ep->nr,
-                                  p, name[p->state], name[state]);
+    trace_usb_packet_state_change(bus->busnr, dev->port->path, p->ep->nr, p,
+                                  usb_packet_state_name(p->state),
+                                  usb_packet_state_name(state));
     p->state = state;
 }
 
diff --git a/hw/usb-desc.c b/hw/usb/desc.c
index ccf85ad..9847a75 100644
--- a/hw/usb-desc.c
+++ b/hw/usb/desc.c
@@ -1,5 +1,5 @@
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "trace.h"
 
 /* ------------------------------------------------------------------ */
diff --git a/hw/usb-desc.h b/hw/usb/desc.h
index d6e07ea..d6e07ea 100644
--- a/hw/usb-desc.h
+++ b/hw/usb/desc.h
diff --git a/hw/usb-audio.c b/hw/usb/dev-audio.c
index fed1361..426b95c 100644
--- a/hw/usb-audio.c
+++ b/hw/usb/dev-audio.c
@@ -30,10 +30,10 @@
  */
 
 #include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
-#include "hw.h"
-#include "audiodev.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+#include "hw/hw.h"
+#include "hw/audiodev.h"
 #include "audio/audio.h"
 
 #define USBAUDIO_VENDOR_NUM     0x46f4 /* CRC16() of "QEMU" */
diff --git a/hw/usb-bt.c b/hw/usb/dev-bluetooth.c
index 23c39ec..195370c 100644
--- a/hw/usb-bt.c
+++ b/hw/usb/dev-bluetooth.c
@@ -19,10 +19,10 @@
  */
 
 #include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "net.h"
-#include "bt.h"
+#include "hw/bt.h"
 
 struct USBBtState {
     USBDevice dev;
diff --git a/hw/usb-hid.c b/hw/usb/dev-hid.c
index 37bca78..f29544d 100644
--- a/hw/usb-hid.c
+++ b/hw/usb/dev-hid.c
@@ -22,12 +22,12 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */
-#include "hw.h"
+#include "hw/hw.h"
 #include "console.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "qemu-timer.h"
-#include "hid.h"
+#include "hw/hid.h"
 
 /* HID interface requests */
 #define GET_REPORT   0xa101
diff --git a/hw/usb-hub.c b/hw/usb/dev-hub.c
index a12856e..eb4e711 100644
--- a/hw/usb-hub.c
+++ b/hw/usb/dev-hub.c
@@ -22,8 +22,8 @@
  * THE SOFTWARE.
  */
 #include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 
 //#define DEBUG
 
diff --git a/hw/usb-net.c b/hw/usb/dev-network.c
index 22b8201..cff55f2 100644
--- a/hw/usb-net.c
+++ b/hw/usb/dev-network.c
@@ -24,8 +24,8 @@
  */
 
 #include "qemu-common.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "net.h"
 #include "qemu-queue.h"
 #include "sysemu.h"
diff --git a/hw/usb-serial.c b/hw/usb/dev-serial.c
index 0aae379..8dcac8b 100644
--- a/hw/usb-serial.c
+++ b/hw/usb/dev-serial.c
@@ -10,8 +10,8 @@
 
 #include "qemu-common.h"
 #include "qemu-error.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "qemu-char.h"
 
 //#define DEBUG_Serial
diff --git a/hw/usb-ccid.c b/hw/usb/dev-smartcard-reader.c
index ced687f..8e66675 100644
--- a/hw/usb-ccid.c
+++ b/hw/usb/dev-smartcard-reader.c
@@ -36,8 +36,8 @@
 
 #include "qemu-common.h"
 #include "qemu-error.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 #include "monitor.h"
 
 #include "hw/ccid.h"
diff --git a/hw/usb-msd.c b/hw/usb/dev-storage.c
index c6f08a0..bdbe7bd 100644
--- a/hw/usb-msd.c
+++ b/hw/usb/dev-storage.c
@@ -10,9 +10,9 @@
 #include "qemu-common.h"
 #include "qemu-option.h"
 #include "qemu-config.h"
-#include "usb.h"
-#include "usb-desc.h"
-#include "scsi.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+#include "hw/scsi.h"
 #include "console.h"
 #include "monitor.h"
 #include "sysemu.h"
@@ -193,9 +193,9 @@ static void usb_msd_send_status(MSDState *s, USBPacket *p)
     int len;
 
     DPRINTF("Command status %d tag 0x%x, len %zd\n",
-            s->csw.status, s->csw.tag, p->iov.size);
+            s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
 
-    assert(s->csw.sig == 0x53425355);
+    assert(s->csw.sig == cpu_to_le32(0x53425355));
     len = MIN(sizeof(s->csw), p->iov.size);
     usb_packet_copy(p, &s->csw, len);
     memset(&s->csw, 0, sizeof(s->csw));
@@ -233,7 +233,7 @@ static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t r
 
     s->csw.sig = cpu_to_le32(0x53425355);
     s->csw.tag = cpu_to_le32(req->tag);
-    s->csw.residue = s->residue;
+    s->csw.residue = cpu_to_le32(s->residue);
     s->csw.status = status != 0;
 
     if (s->packet) {
diff --git a/hw/usb-wacom.c b/hw/usb/dev-wacom.c
index 197e2dc..c1cfd74 100644
--- a/hw/usb-wacom.c
+++ b/hw/usb/dev-wacom.c
@@ -25,10 +25,10 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */
-#include "hw.h"
+#include "hw/hw.h"
 #include "console.h"
-#include "usb.h"
-#include "usb-desc.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
 
 /* Interface requests */
 #define WACOM_GET_REPORT	0x2101
diff --git a/hw/usb-ehci.c b/hw/usb/hcd-ehci.c
index df742f7..60f9f5b 100644
--- a/hw/usb-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -22,10 +22,10 @@
  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "hw.h"
+#include "hw/hw.h"
 #include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
 #include "monitor.h"
 #include "trace.h"
 #include "dma.h"
@@ -419,7 +419,6 @@ struct EHCIState {
 
     USBPacket ipacket;
     QEMUSGList isgl;
-    int isoch_pause;
 
     uint64_t last_run_ns;
 };
@@ -907,7 +906,6 @@ static void ehci_reset(void *opaque)
 
     s->astate = EST_INACTIVE;
     s->pstate = EST_INACTIVE;
-    s->isoch_pause = -1;
     s->attach_poll_counter = 0;
 
     for(i = 0; i < NB_PORTS; i++) {
@@ -2150,9 +2148,7 @@ static void ehci_frame_timer(void *opaque)
 
     for (i = 0; i < frames; i++) {
         if ( !(ehci->usbsts & USBSTS_HALT)) {
-            if (ehci->isoch_pause <= 0) {
-                ehci->frindex += 8;
-            }
+            ehci->frindex += 8;
 
             if (ehci->frindex > 0x00001fff) {
                 ehci->frindex = 0;
diff --git a/hw/usb-musb.c b/hw/usb/hcd-musb.c
index 820907a..fa9385e 100644
--- a/hw/usb-musb.c
+++ b/hw/usb/hcd-musb.c
@@ -22,9 +22,9 @@
  */
 #include "qemu-common.h"
 #include "qemu-timer.h"
-#include "usb.h"
-#include "irq.h"
-#include "hw.h"
+#include "hw/usb.h"
+#include "hw/irq.h"
+#include "hw/hw.h"
 
 /* Common USB registers */
 #define MUSB_HDRC_FADDR		0x00	/* 8-bit */
diff --git a/hw/usb-ohci.c b/hw/usb/hcd-ohci.c
index 20aaa74..1a1cc88 100644
--- a/hw/usb-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -26,13 +26,12 @@
  *  o BIOS work to boot from USB storage
 */
 
-#include "hw.h"
+#include "hw/hw.h"
 #include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
-#include "usb-ohci.h"
-#include "sysbus.h"
-#include "qdev-addr.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
+#include "hw/sysbus.h"
+#include "hw/qdev-addr.h"
 
 //#define DEBUG_OHCI
 /* Dump packet contents.  */
@@ -122,6 +121,11 @@ struct ohci_hcca {
     uint16_t frame, pad;
     uint32_t done;
 };
+#define HCCA_WRITEBACK_OFFSET   offsetof(struct ohci_hcca, frame)
+#define HCCA_WRITEBACK_SIZE     8 /* frame, pad, done */
+
+#define ED_WBACK_OFFSET offsetof(struct ohci_ed, head)
+#define ED_WBACK_SIZE   4
 
 static void ohci_bus_stop(OHCIState *ohci);
 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev);
@@ -569,7 +573,13 @@ static inline int ohci_read_hcca(OHCIState *ohci,
 static inline int ohci_put_ed(OHCIState *ohci,
                               uint32_t addr, struct ohci_ed *ed)
 {
-    return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2);
+    /* ed->tail is under control of the HCD.
+     * Since just ed->head is changed by HC, just write back this
+     */
+
+    return put_dwords(ohci, addr + ED_WBACK_OFFSET,
+                      (uint32_t *)((char *)ed + ED_WBACK_OFFSET),
+                      ED_WBACK_SIZE >> 2);
 }
 
 static inline int ohci_put_td(OHCIState *ohci,
@@ -588,7 +598,9 @@ static inline int ohci_put_iso_td(OHCIState *ohci,
 static inline int ohci_put_hcca(OHCIState *ohci,
                                 uint32_t addr, struct ohci_hcca *hcca)
 {
-    cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca));
+    cpu_physical_memory_write(addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET,
+                              (char *)hcca + HCCA_WRITEBACK_OFFSET,
+                              HCCA_WRITEBACK_SIZE);
     return 1;
 }
 
@@ -1815,11 +1827,6 @@ static int usb_ohci_initfn_pci(struct PCIDevice *dev)
     return 0;
 }
 
-void usb_ohci_init_pci(struct PCIBus *bus, int devfn)
-{
-    pci_create_simple(bus, devfn, "pci-ohci");
-}
-
 typedef struct {
     SysBusDevice busdev;
     OHCIState ohci;
diff --git a/hw/usb-uhci.c b/hw/usb/hcd-uhci.c
index 304b84b..e55dad9 100644
--- a/hw/usb-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -25,13 +25,13 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */
-#include "hw.h"
-#include "usb.h"
-#include "pci.h"
+#include "hw/hw.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
 #include "qemu-timer.h"
-#include "usb-uhci.h"
 #include "iov.h"
 #include "dma.h"
+#include "trace.h"
 
 //#define DEBUG
 //#define DEBUG_DUMP_DATA
@@ -77,22 +77,13 @@
 
 #define NB_PORTS 2
 
-#ifdef DEBUG
-#define DPRINTF printf
-
-static const char *pid2str(int pid)
-{
-    switch (pid) {
-    case USB_TOKEN_SETUP: return "SETUP";
-    case USB_TOKEN_IN:    return "IN";
-    case USB_TOKEN_OUT:   return "OUT";
-    }
-    return "?";
-}
-
-#else
-#define DPRINTF(...)
-#endif
+enum {
+    TD_RESULT_STOP_FRAME = 10,
+    TD_RESULT_COMPLETE,
+    TD_RESULT_NEXT_QH,
+    TD_RESULT_ASYNC_START,
+    TD_RESULT_ASYNC_CONT,
+};
 
 typedef struct UHCIState UHCIState;
 typedef struct UHCIAsync UHCIAsync;
@@ -188,6 +179,7 @@ static UHCIQueue *uhci_queue_get(UHCIState *s, UHCI_TD *td)
     queue->token = token;
     QTAILQ_INIT(&queue->asyncs);
     QTAILQ_INSERT_HEAD(&s->queues, queue, next);
+    trace_usb_uhci_queue_add(queue->token);
     return queue;
 }
 
@@ -195,23 +187,27 @@ static void uhci_queue_free(UHCIQueue *queue)
 {
     UHCIState *s = queue->uhci;
 
+    trace_usb_uhci_queue_del(queue->token);
     QTAILQ_REMOVE(&s->queues, queue, next);
     g_free(queue);
 }
 
-static UHCIAsync *uhci_async_alloc(UHCIQueue *queue)
+static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t addr)
 {
     UHCIAsync *async = g_new0(UHCIAsync, 1);
 
     async->queue = queue;
+    async->td = addr;
     usb_packet_init(&async->packet);
     pci_dma_sglist_init(&async->sgl, &queue->uhci->dev, 1);
+    trace_usb_uhci_packet_add(async->queue->token, async->td);
 
     return async;
 }
 
 static void uhci_async_free(UHCIAsync *async)
 {
+    trace_usb_uhci_packet_del(async->queue->token, async->td);
     usb_packet_cleanup(&async->packet);
     qemu_sglist_destroy(&async->sgl);
     g_free(async);
@@ -221,19 +217,19 @@ static void uhci_async_link(UHCIAsync *async)
 {
     UHCIQueue *queue = async->queue;
     QTAILQ_INSERT_TAIL(&queue->asyncs, async, next);
+    trace_usb_uhci_packet_link_async(async->queue->token, async->td);
 }
 
 static void uhci_async_unlink(UHCIAsync *async)
 {
     UHCIQueue *queue = async->queue;
     QTAILQ_REMOVE(&queue->asyncs, async, next);
+    trace_usb_uhci_packet_unlink_async(async->queue->token, async->td);
 }
 
 static void uhci_async_cancel(UHCIAsync *async)
 {
-    DPRINTF("uhci: cancel td 0x%x token 0x%x done %u\n",
-           async->td, async->token, async->done);
-
+    trace_usb_uhci_packet_cancel(async->queue->token, async->td, async->done);
     if (!async->done)
         usb_cancel_packet(&async->packet);
     uhci_async_free(async);
@@ -300,6 +296,7 @@ static void uhci_async_cancel_all(UHCIState *s)
             uhci_async_unlink(curr);
             uhci_async_cancel(curr);
         }
+        uhci_queue_free(queue);
     }
 }
 
@@ -350,7 +347,7 @@ static void uhci_reset(void *opaque)
     int i;
     UHCIPort *port;
 
-    DPRINTF("uhci: full reset\n");
+    trace_usb_uhci_reset();
 
     pci_conf = s->dev.config;
 
@@ -450,12 +447,13 @@ static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
     UHCIState *s = opaque;
 
     addr &= 0x1f;
-    DPRINTF("uhci: writew port=0x%04x val=0x%04x\n", addr, val);
+    trace_usb_uhci_mmio_writew(addr, val);
 
     switch(addr) {
     case 0x00:
         if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
             /* start frame processing */
+            trace_usb_uhci_schedule_start();
             s->expire_time = qemu_get_clock_ns(vm_clock) +
                 (get_ticks_per_sec() / FRAME_TIMER_FREQ);
             qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock));
@@ -560,7 +558,7 @@ static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
         break;
     }
 
-    DPRINTF("uhci: readw port=0x%04x val=0x%04x\n", addr, val);
+    trace_usb_uhci_mmio_readw(addr, val);
 
     return val;
 }
@@ -570,7 +568,7 @@ static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
     UHCIState *s = opaque;
 
     addr &= 0x1f;
-    DPRINTF("uhci: writel port=0x%04x val=0x%08x\n", addr, val);
+    trace_usb_uhci_mmio_writel(addr, val);
 
     switch(addr) {
     case 0x08:
@@ -593,6 +591,7 @@ static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
         val = 0xffffffff;
         break;
     }
+    trace_usb_uhci_mmio_readl(addr, val);
     return val;
 }
 
@@ -728,13 +727,15 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_
         if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
             *int_mask |= 0x02;
             /* short packet: do not update QH */
-            DPRINTF("uhci: short packet. td 0x%x token 0x%x\n", async->td, async->token);
-            return 1;
+            trace_usb_uhci_packet_complete_shortxfer(async->queue->token,
+                                                    async->td);
+            return TD_RESULT_NEXT_QH;
         }
     }
 
     /* success */
-    return 0;
+    trace_usb_uhci_packet_complete_success(async->queue->token, async->td);
+    return TD_RESULT_COMPLETE;
 
 out:
     switch(ret) {
@@ -746,7 +747,8 @@ out:
             *int_mask |= 0x01;
         }
         uhci_update_irq(s);
-        return 1;
+        trace_usb_uhci_packet_complete_stall(async->queue->token, async->td);
+        return TD_RESULT_NEXT_QH;
 
     case USB_RET_BABBLE:
         td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
@@ -757,13 +759,14 @@ out:
         }
         uhci_update_irq(s);
         /* frame interrupted */
-        return -1;
+        trace_usb_uhci_packet_complete_babble(async->queue->token, async->td);
+        return TD_RESULT_STOP_FRAME;
 
     case USB_RET_NAK:
         td->ctrl |= TD_CTRL_NAK;
         if (pid == USB_TOKEN_SETUP)
             break;
-	return 1;
+        return TD_RESULT_NEXT_QH;
 
     case USB_RET_IOERROR:
     case USB_RET_NODEV:
@@ -783,11 +786,13 @@ out:
             if (td->ctrl & TD_CTRL_IOC)
                 *int_mask |= 0x01;
             uhci_update_irq(s);
+            trace_usb_uhci_packet_complete_error(async->queue->token,
+                                                 async->td);
         }
     }
     td->ctrl = (td->ctrl & ~(3 << TD_CTRL_ERROR_SHIFT)) |
         (err << TD_CTRL_ERROR_SHIFT);
-    return 1;
+    return TD_RESULT_NEXT_QH;
 }
 
 static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *int_mask)
@@ -800,7 +805,7 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
 
     /* Is active ? */
     if (!(td->ctrl & TD_CTRL_ACTIVE))
-        return 1;
+        return TD_RESULT_NEXT_QH;
 
     async = uhci_async_find_td(s, addr, td);
     if (async) {
@@ -808,22 +813,19 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
         async->queue->valid = 32;
 
         if (!async->done)
-            return 1;
+            return TD_RESULT_ASYNC_CONT;
 
         uhci_async_unlink(async);
         goto done;
     }
 
     /* Allocate new packet */
-    async = uhci_async_alloc(uhci_queue_get(s, td));
-    if (!async)
-        return 1;
+    async = uhci_async_alloc(uhci_queue_get(s, td), addr);
 
     /* valid needs to be large enough to handle 10 frame delay
      * for initial isochronous requests
      */
     async->queue->valid = 32;
-    async->td    = addr;
     async->isoc  = td->ctrl & TD_CTRL_IOS;
 
     max_len = ((td->token >> 21) + 1) & 0x7ff;
@@ -852,12 +854,12 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *in
         uhci_async_free(async);
         s->status |= UHCI_STS_HCPERR;
         uhci_update_irq(s);
-        return -1;
+        return TD_RESULT_STOP_FRAME;
     }
  
     if (len == USB_RET_ASYNC) {
         uhci_async_link(async);
-        return 2;
+        return TD_RESULT_ASYNC_START;
     }
 
     async->packet.result = len;
@@ -874,8 +876,6 @@ static void uhci_async_complete(USBPort *port, USBPacket *packet)
     UHCIAsync *async = container_of(packet, UHCIAsync, packet);
     UHCIState *s = async->queue->uhci;
 
-    DPRINTF("uhci: async complete. td 0x%x token 0x%x\n", async->td, async->token);
-
     if (async->isoc) {
         UHCI_TD td;
         uint32_t link = async->td;
@@ -963,8 +963,9 @@ static void uhci_fill_queue(UHCIState *s, UHCI_TD *td)
         if (uhci_queue_token(&ptd) != token) {
             break;
         }
+        trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
         ret = uhci_handle_td(s, plink, &ptd, &int_mask);
-        assert(ret == 2); /* got USB_RET_ASYNC */
+        assert(ret == TD_RESULT_ASYNC_START);
         assert(int_mask == 0);
         plink = ptd.link;
     }
@@ -981,8 +982,6 @@ static void uhci_process_frame(UHCIState *s)
 
     frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
 
-    DPRINTF("uhci: processing frame %d addr 0x%x\n" , s->frnum, frame_addr);
-
     pci_dma_read(&s->dev, frame_addr, &link, 4);
     le32_to_cpus(&link);
 
@@ -994,6 +993,7 @@ static void uhci_process_frame(UHCIState *s)
     for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) {
         if (is_qh(link)) {
             /* QH */
+            trace_usb_uhci_qh_load(link & ~0xf);
 
             if (qhdb_insert(&qhdb, link)) {
                 /*
@@ -1006,14 +1006,14 @@ static void uhci_process_frame(UHCIState *s)
                  *  (b) we've reached the usb 1.1 bandwidth, which is
                  *      1280 bytes/frame.
                  */
-                DPRINTF("uhci: detected loop. qh 0x%x\n", link);
                 if (td_count == 0) {
-                    DPRINTF("uhci: no transaction last round, stop\n");
+                    trace_usb_uhci_frame_loop_stop_idle();
                     break;
                 } else if (bytes_count >= 1280) {
-                    DPRINTF("uhci: bandwidth limit reached, stop\n");
+                    trace_usb_uhci_frame_loop_stop_bandwidth();
                     break;
                 } else {
+                    trace_usb_uhci_frame_loop_continue();
                     td_count = 0;
                     qhdb_reset(&qhdb);
                     qhdb_insert(&qhdb, link);
@@ -1024,9 +1024,6 @@ static void uhci_process_frame(UHCIState *s)
             le32_to_cpus(&qh.link);
             le32_to_cpus(&qh.el_link);
 
-            DPRINTF("uhci: QH 0x%x load. link 0x%x elink 0x%x\n",
-                    link, qh.link, qh.el_link);
-
             if (!is_valid(qh.el_link)) {
                 /* QH w/o elements */
                 curr_qh = 0;
@@ -1045,9 +1042,7 @@ static void uhci_process_frame(UHCIState *s)
         le32_to_cpus(&td.ctrl);
         le32_to_cpus(&td.token);
         le32_to_cpus(&td.buffer);
-
-        DPRINTF("uhci: TD 0x%x load. link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n", 
-                link, td.link, td.ctrl, td.token, curr_qh);
+        trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
 
         old_td_ctrl = td.ctrl;
         ret = uhci_handle_td(s, link, &td, &int_mask);
@@ -1058,31 +1053,25 @@ static void uhci_process_frame(UHCIState *s)
         }
 
         switch (ret) {
-        case -1: /* interrupted frame */
+        case TD_RESULT_STOP_FRAME: /* interrupted frame */
             goto out;
 
-        case 1: /* goto next queue */
-            DPRINTF("uhci: TD 0x%x skip. "
-                    "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
-                    link, td.link, td.ctrl, td.token, curr_qh);
+        case TD_RESULT_NEXT_QH:
+        case TD_RESULT_ASYNC_CONT:
+            trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf);
             link = curr_qh ? qh.link : td.link;
             continue;
 
-        case 2: /* got USB_RET_ASYNC */
-            DPRINTF("uhci: TD 0x%x async. "
-                    "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
-                    link, td.link, td.ctrl, td.token, curr_qh);
+        case TD_RESULT_ASYNC_START:
+            trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf);
             if (is_valid(td.link)) {
                 uhci_fill_queue(s, &td);
             }
             link = curr_qh ? qh.link : td.link;
             continue;
 
-        case 0: /* completed TD */
-            DPRINTF("uhci: TD 0x%x done. "
-                    "link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n",
-                    link, td.link, td.ctrl, td.token, curr_qh);
-
+        case TD_RESULT_COMPLETE:
+            trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf);
             link = td.link;
             td_count++;
             bytes_count += (td.ctrl & 0x7ff) + 1;
@@ -1095,10 +1084,6 @@ static void uhci_process_frame(UHCIState *s)
 
                 if (!depth_first(link)) {
                     /* done with this QH */
-
-                    DPRINTF("uhci: QH 0x%x done. link 0x%x elink 0x%x\n",
-                            curr_qh, qh.link, qh.el_link);
-
                     curr_qh = 0;
                     link    = qh.link;
                 }
@@ -1125,11 +1110,11 @@ static void uhci_frame_timer(void *opaque)
 
     if (!(s->cmd & UHCI_CMD_RS)) {
         /* Full stop */
+        trace_usb_uhci_schedule_stop();
         qemu_del_timer(s->frame_timer);
+        uhci_async_cancel_all(s);
         /* set hchalted bit in status - UHCI11D 2.1.2 */
         s->status |= UHCI_STS_HCHALTED;
-
-        DPRINTF("uhci: halted\n");
         return;
     }
 
@@ -1144,7 +1129,7 @@ static void uhci_frame_timer(void *opaque)
     /* Start new frame */
     s->frnum = (s->frnum + 1) & 0x7ff;
 
-    DPRINTF("uhci: new frame #%u\n" , s->frnum);
+    trace_usb_uhci_frame_start(s->frnum);
 
     uhci_async_validate_begin(s);
 
@@ -1391,18 +1376,3 @@ static void uhci_register_types(void)
 }
 
 type_init(uhci_register_types)
-
-void usb_uhci_piix3_init(PCIBus *bus, int devfn)
-{
-    pci_create_simple(bus, devfn, "piix3-usb-uhci");
-}
-
-void usb_uhci_piix4_init(PCIBus *bus, int devfn)
-{
-    pci_create_simple(bus, devfn, "piix4-usb-uhci");
-}
-
-void usb_uhci_vt82c686b_init(PCIBus *bus, int devfn)
-{
-    pci_create_simple(bus, devfn, "vt82c686b-usb-uhci");
-}
diff --git a/hw/usb-xhci.c b/hw/usb/hcd-xhci.c
index e8f1b6e..73b0c7f 100644
--- a/hw/usb-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -18,12 +18,12 @@
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  */
-#include "hw.h"
+#include "hw/hw.h"
 #include "qemu-timer.h"
-#include "usb.h"
-#include "pci.h"
-#include "qdev-addr.h"
-#include "msi.h"
+#include "hw/usb.h"
+#include "hw/pci.h"
+#include "hw/qdev-addr.h"
+#include "hw/msi.h"
 
 //#define DEBUG_XHCI
 //#define DEBUG_DATA
diff --git a/hw/usb/host-bsd.c b/hw/usb/host-bsd.c
new file mode 100644
index 0000000..ec26266
--- /dev/null
+++ b/hw/usb/host-bsd.c
@@ -0,0 +1,647 @@
+/*
+ * BSD host USB redirector
+ *
+ * Copyright (c) 2006 Lonnie Mendez
+ * Portions of code and concepts borrowed from
+ * usb-linux.c and libusb's bsd.c and are copyright their respective owners.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "monitor.h"
+#include "hw/usb.h"
+
+/* usb.h declares these */
+#undef USB_SPEED_HIGH
+#undef USB_SPEED_FULL
+#undef USB_SPEED_LOW
+
+#include <sys/ioctl.h>
+#ifndef __DragonFly__
+#include <dev/usb/usb.h>
+#else
+#include <bus/usb/usb.h>
+#endif
+
+/* This value has maximum potential at 16.
+ * You should also set hw.usb.debug to gain
+ * more detailed view.
+ */
+//#define DEBUG
+#define UGEN_DEBUG_LEVEL 0
+
+
+typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id,
+                        int vendor_id, int product_id,
+                        const char *product_name, int speed);
+static int usb_host_find_device(int *pbus_num, int *paddr,
+                                const char *devname);
+
+typedef struct USBHostDevice {
+    USBDevice dev;
+    int ep_fd[USB_MAX_ENDPOINTS];
+    int devfd;
+    char devpath[32];
+} USBHostDevice;
+
+
+static int ensure_ep_open(USBHostDevice *dev, int ep, int mode)
+{
+    char buf[32];
+    int fd;
+
+    /* Get the address for this endpoint */
+    ep = UE_GET_ADDR(ep);
+
+    if (dev->ep_fd[ep] < 0) {
+#if defined(__FreeBSD__) || defined(__DragonFly__)
+        snprintf(buf, sizeof(buf) - 1, "%s.%d", dev->devpath, ep);
+#else
+        snprintf(buf, sizeof(buf) - 1, "%s.%02d", dev->devpath, ep);
+#endif
+        /* Try to open it O_RDWR first for those devices which have in and out
+         * endpoints with the same address (eg 0x02 and 0x82)
+         */
+        fd = open(buf, O_RDWR);
+        if (fd < 0 && errno == ENXIO)
+            fd = open(buf, mode);
+        if (fd < 0) {
+#ifdef DEBUG
+            printf("ensure_ep_open: failed to open device endpoint %s: %s\n",
+                   buf, strerror(errno));
+#endif
+        }
+        dev->ep_fd[ep] = fd;
+    }
+
+    return dev->ep_fd[ep];
+}
+
+static void ensure_eps_closed(USBHostDevice *dev)
+{
+    int epnum = 1;
+
+    if (!dev)
+        return;
+
+    while (epnum < USB_MAX_ENDPOINTS) {
+        if (dev->ep_fd[epnum] >= 0) {
+            close(dev->ep_fd[epnum]);
+            dev->ep_fd[epnum] = -1;
+        }
+        epnum++;
+    }
+}
+
+static void usb_host_handle_reset(USBDevice *dev)
+{
+#if 0
+    USBHostDevice *s = (USBHostDevice *)dev;
+#endif
+}
+
+/* XXX:
+ * -check device states against transfer requests
+ *  and return appropriate response
+ */
+static int usb_host_handle_control(USBDevice *dev,
+                                   USBPacket *p,
+                                   int request,
+                                   int value,
+                                   int index,
+                                   int length,
+                                   uint8_t *data)
+{
+    USBHostDevice *s = (USBHostDevice *)dev;
+    struct usb_ctl_request req;
+    struct usb_alt_interface aiface;
+    int ret, timeout = 50;
+
+    if ((request >> 8) == UT_WRITE_DEVICE &&
+        (request & 0xff) == UR_SET_ADDRESS) {
+
+        /* specific SET_ADDRESS support */
+        dev->addr = value;
+        return 0;
+    } else if ((request >> 8) == UT_WRITE_DEVICE &&
+               (request & 0xff) == UR_SET_CONFIG) {
+
+        ensure_eps_closed(s); /* can't do this without all eps closed */
+
+        ret = ioctl(s->devfd, USB_SET_CONFIG, &value);
+        if (ret < 0) {
+#ifdef DEBUG
+            printf("handle_control: failed to set configuration - %s\n",
+                   strerror(errno));
+#endif
+            return USB_RET_STALL;
+        }
+
+        return 0;
+    } else if ((request >> 8) == UT_WRITE_INTERFACE &&
+               (request & 0xff) == UR_SET_INTERFACE) {
+
+        aiface.uai_interface_index = index;
+        aiface.uai_alt_no = value;
+
+        ensure_eps_closed(s); /* can't do this without all eps closed */
+        ret = ioctl(s->devfd, USB_SET_ALTINTERFACE, &aiface);
+        if (ret < 0) {
+#ifdef DEBUG
+            printf("handle_control: failed to set alternate interface - %s\n",
+                   strerror(errno));
+#endif
+            return USB_RET_STALL;
+        }
+
+        return 0;
+    } else {
+        req.ucr_request.bmRequestType = request >> 8;
+        req.ucr_request.bRequest = request & 0xff;
+        USETW(req.ucr_request.wValue, value);
+        USETW(req.ucr_request.wIndex, index);
+        USETW(req.ucr_request.wLength, length);
+        req.ucr_data = data;
+        req.ucr_flags = USBD_SHORT_XFER_OK;
+
+        ret = ioctl(s->devfd, USB_SET_TIMEOUT, &timeout);
+#if defined(__NetBSD__) || defined(__OpenBSD__)
+        if (ret < 0 && errno != EINVAL) {
+#else
+        if (ret < 0) {
+#endif
+#ifdef DEBUG
+            printf("handle_control: setting timeout failed - %s\n",
+                   strerror(errno));
+#endif
+        }
+
+        ret = ioctl(s->devfd, USB_DO_REQUEST, &req);
+        /* ugen returns EIO for usbd_do_request_ no matter what
+         * happens with the transfer */
+        if (ret < 0) {
+#ifdef DEBUG
+            printf("handle_control: error after request - %s\n",
+                   strerror(errno));
+#endif
+            return USB_RET_NAK; // STALL
+        } else {
+            return req.ucr_actlen;
+        }
+    }
+}
+
+static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
+{
+    USBHostDevice *s = (USBHostDevice *)dev;
+    int ret, fd, mode;
+    int one = 1, shortpacket = 0, timeout = 50;
+    sigset_t new_mask, old_mask;
+    uint8_t devep = p->ep->nr;
+
+    /* protect data transfers from SIGALRM signal */
+    sigemptyset(&new_mask);
+    sigaddset(&new_mask, SIGALRM);
+    sigprocmask(SIG_BLOCK, &new_mask, &old_mask);
+
+    if (p->pid == USB_TOKEN_IN) {
+        devep |= 0x80;
+        mode = O_RDONLY;
+        shortpacket = 1;
+    } else {
+        mode = O_WRONLY;
+    }
+
+    fd = ensure_ep_open(s, devep, mode);
+    if (fd < 0) {
+        sigprocmask(SIG_SETMASK, &old_mask, NULL);
+        return USB_RET_NODEV;
+    }
+
+    if (ioctl(fd, USB_SET_TIMEOUT, &timeout) < 0) {
+#ifdef DEBUG
+        printf("handle_data: failed to set timeout - %s\n",
+               strerror(errno));
+#endif
+    }
+
+    if (shortpacket) {
+        if (ioctl(fd, USB_SET_SHORT_XFER, &one) < 0) {
+#ifdef DEBUG
+            printf("handle_data: failed to set short xfer mode - %s\n",
+                   strerror(errno));
+#endif
+            sigprocmask(SIG_SETMASK, &old_mask, NULL);
+        }
+    }
+
+    if (p->pid == USB_TOKEN_IN)
+        ret = readv(fd, p->iov.iov, p->iov.niov);
+    else
+        ret = writev(fd, p->iov.iov, p->iov.niov);
+
+    sigprocmask(SIG_SETMASK, &old_mask, NULL);
+
+    if (ret < 0) {
+#ifdef DEBUG
+        printf("handle_data: error after %s data - %s\n",
+               pid == USB_TOKEN_IN ? "reading" : "writing", strerror(errno));
+#endif
+        switch(errno) {
+        case ETIMEDOUT:
+        case EINTR:
+            return USB_RET_NAK;
+        default:
+            return USB_RET_STALL;
+        }
+    } else {
+        return ret;
+    }
+}
+
+static void usb_host_handle_destroy(USBDevice *opaque)
+{
+    USBHostDevice *s = (USBHostDevice *)opaque;
+    int i;
+
+    for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+        if (s->ep_fd[i] >= 0)
+            close(s->ep_fd[i]);
+
+    if (s->devfd < 0)
+        return;
+
+    close(s->devfd);
+
+    g_free(s);
+}
+
+static int usb_host_initfn(USBDevice *dev)
+{
+    return 0;
+}
+
+USBDevice *usb_host_device_open(USBBus *guest_bus, const char *devname)
+{
+    struct usb_device_info bus_info, dev_info;
+    USBDevice *d = NULL, *ret = NULL;
+    USBHostDevice *dev;
+    char ctlpath[PATH_MAX + 1];
+    char buspath[PATH_MAX + 1];
+    int bfd, dfd, bus, address, i;
+    int ugendebug = UGEN_DEBUG_LEVEL;
+
+    if (usb_host_find_device(&bus, &address, devname) < 0) {
+        goto fail;
+    }
+
+    snprintf(buspath, PATH_MAX, "/dev/usb%d", bus);
+
+    bfd = open(buspath, O_RDWR);
+    if (bfd < 0) {
+#ifdef DEBUG
+        printf("usb_host_device_open: failed to open usb bus - %s\n",
+               strerror(errno));
+#endif
+        goto fail;
+    }
+
+    bus_info.udi_addr = address;
+    if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0) {
+#ifdef DEBUG
+        printf("usb_host_device_open: failed to grab bus information - %s\n",
+               strerror(errno));
+#endif
+        goto fail_bfd;
+    }
+
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+    snprintf(ctlpath, PATH_MAX, "/dev/%s", bus_info.udi_devnames[0]);
+#else
+    snprintf(ctlpath, PATH_MAX, "/dev/%s.00", bus_info.udi_devnames[0]);
+#endif
+
+    dfd  = open(ctlpath, O_RDWR);
+    if (dfd < 0) {
+        dfd = open(ctlpath, O_RDONLY);
+        if (dfd < 0) {
+#ifdef DEBUG
+            printf("usb_host_device_open: failed to open usb device %s - %s\n",
+                   ctlpath, strerror(errno));
+#endif
+        }
+        goto fail_dfd;
+    }
+
+    if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0) {
+#ifdef DEBUG
+        printf("usb_host_device_open: failed to grab device info - %s\n",
+               strerror(errno));
+#endif
+        goto fail_dfd;
+    }
+
+    d = usb_create(guest_bus, "usb-host");
+    dev = DO_UPCAST(USBHostDevice, dev, d);
+
+    if (dev_info.udi_speed == 1) {
+        dev->dev.speed = USB_SPEED_LOW - 1;
+        dev->dev.speedmask = USB_SPEED_MASK_LOW;
+    } else {
+        dev->dev.speed = USB_SPEED_FULL - 1;
+        dev->dev.speedmask = USB_SPEED_MASK_FULL;
+    }
+
+    if (strncmp(dev_info.udi_product, "product", 7) != 0) {
+        pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+                dev_info.udi_product);
+    } else {
+        snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+                 "host:%s", devname);
+    }
+
+    pstrcpy(dev->devpath, sizeof(dev->devpath), "/dev/");
+    pstrcat(dev->devpath, sizeof(dev->devpath), dev_info.udi_devnames[0]);
+
+    /* Mark the endpoints as not yet open */
+    for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+        dev->ep_fd[i] = -1;
+    }
+
+    ioctl(dfd, USB_SETDEBUG, &ugendebug);
+
+    ret = (USBDevice *)dev;
+
+fail_dfd:
+    close(dfd);
+fail_bfd:
+    close(bfd);
+fail:
+    return ret;
+}
+
+static void usb_host_class_initfn(ObjectClass *klass, void *data)
+{
+    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+    uc->product_desc   = "USB Host Device";
+    uc->init           = usb_host_initfn;
+    uc->handle_reset   = usb_host_handle_reset;
+    uc->handle_control = usb_host_handle_control;
+    uc->handle_data    = usb_host_handle_data;
+    uc->handle_destroy = usb_host_handle_destroy;
+}
+
+static TypeInfo usb_host_dev_info = {
+    .name          = "usb-host",
+    .parent        = TYPE_USB_DEVICE,
+    .instance_size = sizeof(USBHostDevice),
+    .class_init    = usb_host_class_initfn,
+};
+
+static void usb_host_register_types(void)
+{
+    type_register_static(&usb_host_dev_info);
+}
+
+type_init(usb_host_register_types)
+
+static int usb_host_scan(void *opaque, USBScanFunc *func)
+{
+    struct usb_device_info bus_info;
+    struct usb_device_info dev_info;
+    uint16_t vendor_id, product_id, class_id, speed;
+    int bfd, dfd, bus, address;
+    char busbuf[20], devbuf[20], product_name[256];
+    int ret = 0;
+
+    for (bus = 0; bus < 10; bus++) {
+
+        snprintf(busbuf, sizeof(busbuf) - 1, "/dev/usb%d", bus);
+        bfd = open(busbuf, O_RDWR);
+        if (bfd < 0)
+	    continue;
+
+        for (address = 1; address < 127; address++) {
+
+            bus_info.udi_addr = address;
+            if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0)
+                continue;
+
+            /* only list devices that can be used by generic layer */
+            if (strncmp(bus_info.udi_devnames[0], "ugen", 4) != 0)
+                continue;
+
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
+            snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s", bus_info.udi_devnames[0]);
+#else
+            snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s.00", bus_info.udi_devnames[0]);
+#endif
+
+            dfd = open(devbuf, O_RDONLY);
+            if (dfd < 0) {
+#ifdef DEBUG
+                printf("usb_host_scan: couldn't open device %s - %s\n", devbuf,
+                       strerror(errno));
+#endif
+                continue;
+            }
+
+            if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0)
+                printf("usb_host_scan: couldn't get device information for %s - %s\n",
+                       devbuf, strerror(errno));
+
+            /* XXX: might need to fixup endianness of word values before copying over */
+
+            vendor_id = dev_info.udi_vendorNo;
+            product_id = dev_info.udi_productNo;
+            class_id = dev_info.udi_class;
+            speed = dev_info.udi_speed;
+
+            if (strncmp(dev_info.udi_product, "product", 7) != 0)
+                pstrcpy(product_name, sizeof(product_name),
+                        dev_info.udi_product);
+            else
+                product_name[0] = '\0';
+
+            ret = func(opaque, bus, address, class_id, vendor_id,
+                       product_id, product_name, speed);
+
+            close(dfd);
+
+            if (ret)
+                goto the_end;
+        }
+
+        close(bfd);
+    }
+
+the_end:
+    return ret;
+}
+
+typedef struct FindDeviceState {
+    int vendor_id;
+    int product_id;
+    int bus_num;
+    int addr;
+} FindDeviceState;
+
+static int usb_host_find_device_scan(void *opaque, int bus_num, int addr,
+                                     int class_id,
+                                     int vendor_id, int product_id,
+                                     const char *product_name, int speed)
+{
+    FindDeviceState *s = opaque;
+    if (vendor_id == s->vendor_id &&
+        product_id == s->product_id) {
+        s->bus_num = bus_num;
+        s->addr = addr;
+        return 1;
+     } else {
+        return 0;
+     }
+}
+
+
+/* the syntax is :
+   'bus.addr' (decimal numbers) or
+   'vendor_id:product_id' (hexa numbers) */
+static int usb_host_find_device(int *pbus_num, int *paddr,
+                                const char *devname)
+{
+    const char *p;
+    int ret;
+    FindDeviceState fs;
+
+    p = strchr(devname, '.');
+    if (p) {
+        *pbus_num = strtoul(devname, NULL, 0);
+        *paddr = strtoul(p + 1, NULL, 0);
+        return 0;
+    }
+    p = strchr(devname, ':');
+    if (p) {
+        fs.vendor_id = strtoul(devname, NULL, 16);
+        fs.product_id = strtoul(p + 1, NULL, 16);
+        ret = usb_host_scan(&fs, usb_host_find_device_scan);
+        if (ret) {
+            *pbus_num = fs.bus_num;
+            *paddr = fs.addr;
+            return 0;
+        }
+     }
+     return -1;
+}
+
+/**********************/
+/* USB host device info */
+
+struct usb_class_info {
+    int class;
+    const char *class_name;
+};
+
+static const struct usb_class_info usb_class_info[] = {
+    { USB_CLASS_AUDIO, "Audio"},
+    { USB_CLASS_COMM, "Communication"},
+    { USB_CLASS_HID, "HID"},
+    { USB_CLASS_HUB, "Hub" },
+    { USB_CLASS_PHYSICAL, "Physical" },
+    { USB_CLASS_PRINTER, "Printer" },
+    { USB_CLASS_MASS_STORAGE, "Storage" },
+    { USB_CLASS_CDC_DATA, "Data" },
+    { USB_CLASS_APP_SPEC, "Application Specific" },
+    { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
+    { USB_CLASS_STILL_IMAGE, "Still Image" },
+    { USB_CLASS_CSCID, "Smart Card" },
+    { USB_CLASS_CONTENT_SEC, "Content Security" },
+    { -1, NULL }
+};
+
+static const char *usb_class_str(uint8_t class)
+{
+    const struct usb_class_info *p;
+    for (p = usb_class_info; p->class != -1; p++) {
+        if (p->class == class)
+            break;
+    }
+    return p->class_name;
+}
+
+static void usb_info_device(Monitor *mon, int bus_num, int addr, int class_id,
+                            int vendor_id, int product_id,
+                            const char *product_name,
+                            int speed)
+{
+    const char *class_str, *speed_str;
+
+    switch(speed) {
+    case USB_SPEED_LOW:
+        speed_str = "1.5";
+        break;
+    case USB_SPEED_FULL:
+        speed_str = "12";
+        break;
+    case USB_SPEED_HIGH:
+        speed_str = "480";
+        break;
+    default:
+        speed_str = "?";
+        break;
+    }
+
+    monitor_printf(mon, "  Device %d.%d, speed %s Mb/s\n",
+                   bus_num, addr, speed_str);
+    class_str = usb_class_str(class_id);
+    if (class_str)
+        monitor_printf(mon, "    %s:", class_str);
+    else
+        monitor_printf(mon, "    Class %02x:", class_id);
+    monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
+    if (product_name[0] != '\0')
+        monitor_printf(mon, ", %s", product_name);
+    monitor_printf(mon, "\n");
+}
+
+static int usb_host_info_device(void *opaque,
+                                int bus_num, int addr,
+                                int class_id,
+                                int vendor_id, int product_id,
+                                const char *product_name,
+                                int speed)
+{
+    Monitor *mon = opaque;
+
+    usb_info_device(mon, bus_num, addr, class_id, vendor_id, product_id,
+                    product_name, speed);
+    return 0;
+}
+
+void usb_host_info(Monitor *mon)
+{
+    usb_host_scan(mon, usb_host_info_device);
+}
+
+/* XXX add this */
+int usb_host_device_close(const char *devname)
+{
+    return 0;
+}
diff --git a/hw/usb/host-linux.c b/hw/usb/host-linux.c
new file mode 100644
index 0000000..90919c2
--- /dev/null
+++ b/hw/usb/host-linux.c
@@ -0,0 +1,1913 @@
+/*
+ * Linux host USB redirector
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ *      Support for host device auto connect & disconnect
+ *      Major rewrite to support fully async operation
+ *
+ * Copyright 2008 TJ <linux@tjworld.net>
+ *      Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
+ *      to the legacy /proc/bus/usb USB device discovery and handling
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "monitor.h"
+#include "sysemu.h"
+#include "trace.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+
+#include <linux/usbdevice_fs.h>
+#include <linux/version.h>
+#include "hw/usb.h"
+
+/* We redefine it to avoid version problems */
+struct usb_ctrltransfer {
+    uint8_t  bRequestType;
+    uint8_t  bRequest;
+    uint16_t wValue;
+    uint16_t wIndex;
+    uint16_t wLength;
+    uint32_t timeout;
+    void *data;
+};
+
+typedef int USBScanFunc(void *opaque, int bus_num, int addr, const char *port,
+                        int class_id, int vendor_id, int product_id,
+                        const char *product_name, int speed);
+
+//#define DEBUG
+
+#ifdef DEBUG
+#define DPRINTF printf
+#else
+#define DPRINTF(...)
+#endif
+
+#define PRODUCT_NAME_SZ 32
+#define MAX_PORTLEN 16
+
+/* endpoint association data */
+#define ISO_FRAME_DESC_PER_URB 32
+
+/* devio.c limits single requests to 16k */
+#define MAX_USBFS_BUFFER_SIZE 16384
+
+typedef struct AsyncURB AsyncURB;
+
+struct endp_data {
+    uint8_t halted;
+    uint8_t iso_started;
+    AsyncURB *iso_urb;
+    int iso_urb_idx;
+    int iso_buffer_used;
+    int inflight;
+};
+
+struct USBAutoFilter {
+    uint32_t bus_num;
+    uint32_t addr;
+    char     *port;
+    uint32_t vendor_id;
+    uint32_t product_id;
+};
+
+typedef struct USBHostDevice {
+    USBDevice dev;
+    int       fd;
+    int       hub_fd;
+    int       hub_port;
+
+    uint8_t   descr[8192];
+    int       descr_len;
+    int       closing;
+    uint32_t  iso_urb_count;
+    Notifier  exit;
+
+    struct endp_data ep_in[USB_MAX_ENDPOINTS];
+    struct endp_data ep_out[USB_MAX_ENDPOINTS];
+    QLIST_HEAD(, AsyncURB) aurbs;
+
+    /* Host side address */
+    int bus_num;
+    int addr;
+    char port[MAX_PORTLEN];
+    struct USBAutoFilter match;
+    int seen, errcount;
+
+    QTAILQ_ENTRY(USBHostDevice) next;
+} USBHostDevice;
+
+static QTAILQ_HEAD(, USBHostDevice) hostdevs = QTAILQ_HEAD_INITIALIZER(hostdevs);
+
+static int usb_host_close(USBHostDevice *dev);
+static int parse_filter(const char *spec, struct USBAutoFilter *f);
+static void usb_host_auto_check(void *unused);
+static int usb_host_read_file(char *line, size_t line_size,
+                            const char *device_file, const char *device_name);
+static int usb_linux_update_endp_table(USBHostDevice *s);
+
+static int usb_host_usbfs_type(USBHostDevice *s, USBPacket *p)
+{
+    static const int usbfs[] = {
+        [USB_ENDPOINT_XFER_CONTROL] = USBDEVFS_URB_TYPE_CONTROL,
+        [USB_ENDPOINT_XFER_ISOC]    = USBDEVFS_URB_TYPE_ISO,
+        [USB_ENDPOINT_XFER_BULK]    = USBDEVFS_URB_TYPE_BULK,
+        [USB_ENDPOINT_XFER_INT]     = USBDEVFS_URB_TYPE_INTERRUPT,
+    };
+    uint8_t type = p->ep->type;
+    assert(type < ARRAY_SIZE(usbfs));
+    return usbfs[type];
+}
+
+static int usb_host_do_reset(USBHostDevice *dev)
+{
+    struct timeval s, e;
+    uint32_t usecs;
+    int ret;
+
+    gettimeofday(&s, NULL);
+    ret = ioctl(dev->fd, USBDEVFS_RESET);
+    gettimeofday(&e, NULL);
+    usecs = (e.tv_sec  - s.tv_sec) * 1000000;
+    usecs += e.tv_usec - s.tv_usec;
+    if (usecs > 1000000) {
+        /* more than a second, something is fishy, broken usb device? */
+        fprintf(stderr, "husb: device %d:%d reset took %d.%06d seconds\n",
+                dev->bus_num, dev->addr, usecs / 1000000, usecs % 1000000);
+    }
+    return ret;
+}
+
+static struct endp_data *get_endp(USBHostDevice *s, int pid, int ep)
+{
+    struct endp_data *eps = pid == USB_TOKEN_IN ? s->ep_in : s->ep_out;
+    assert(pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT);
+    assert(ep > 0 && ep <= USB_MAX_ENDPOINTS);
+    return eps + ep - 1;
+}
+
+static int is_isoc(USBHostDevice *s, int pid, int ep)
+{
+    return usb_ep_get_type(&s->dev, pid, ep) == USB_ENDPOINT_XFER_ISOC;
+}
+
+static int is_valid(USBHostDevice *s, int pid, int ep)
+{
+    return usb_ep_get_type(&s->dev, pid, ep) != USB_ENDPOINT_XFER_INVALID;
+}
+
+static int is_halted(USBHostDevice *s, int pid, int ep)
+{
+    return get_endp(s, pid, ep)->halted;
+}
+
+static void clear_halt(USBHostDevice *s, int pid, int ep)
+{
+    trace_usb_host_ep_clear_halt(s->bus_num, s->addr, ep);
+    get_endp(s, pid, ep)->halted = 0;
+}
+
+static void set_halt(USBHostDevice *s, int pid, int ep)
+{
+    if (ep != 0) {
+        trace_usb_host_ep_set_halt(s->bus_num, s->addr, ep);
+        get_endp(s, pid, ep)->halted = 1;
+    }
+}
+
+static int is_iso_started(USBHostDevice *s, int pid, int ep)
+{
+    return get_endp(s, pid, ep)->iso_started;
+}
+
+static void clear_iso_started(USBHostDevice *s, int pid, int ep)
+{
+    trace_usb_host_ep_stop_iso(s->bus_num, s->addr, ep);
+    get_endp(s, pid, ep)->iso_started = 0;
+}
+
+static void set_iso_started(USBHostDevice *s, int pid, int ep)
+{
+    struct endp_data *e = get_endp(s, pid, ep);
+
+    trace_usb_host_ep_start_iso(s->bus_num, s->addr, ep);
+    if (!e->iso_started) {
+        e->iso_started = 1;
+        e->inflight = 0;
+    }
+}
+
+static int change_iso_inflight(USBHostDevice *s, int pid, int ep, int value)
+{
+    struct endp_data *e = get_endp(s, pid, ep);
+
+    e->inflight += value;
+    return e->inflight;
+}
+
+static void set_iso_urb(USBHostDevice *s, int pid, int ep, AsyncURB *iso_urb)
+{
+    get_endp(s, pid, ep)->iso_urb = iso_urb;
+}
+
+static AsyncURB *get_iso_urb(USBHostDevice *s, int pid, int ep)
+{
+    return get_endp(s, pid, ep)->iso_urb;
+}
+
+static void set_iso_urb_idx(USBHostDevice *s, int pid, int ep, int i)
+{
+    get_endp(s, pid, ep)->iso_urb_idx = i;
+}
+
+static int get_iso_urb_idx(USBHostDevice *s, int pid, int ep)
+{
+    return get_endp(s, pid, ep)->iso_urb_idx;
+}
+
+static void set_iso_buffer_used(USBHostDevice *s, int pid, int ep, int i)
+{
+    get_endp(s, pid, ep)->iso_buffer_used = i;
+}
+
+static int get_iso_buffer_used(USBHostDevice *s, int pid, int ep)
+{
+    return get_endp(s, pid, ep)->iso_buffer_used;
+}
+
+/*
+ * Async URB state.
+ * We always allocate iso packet descriptors even for bulk transfers
+ * to simplify allocation and casts.
+ */
+struct AsyncURB
+{
+    struct usbdevfs_urb urb;
+    struct usbdevfs_iso_packet_desc isocpd[ISO_FRAME_DESC_PER_URB];
+    USBHostDevice *hdev;
+    QLIST_ENTRY(AsyncURB) next;
+
+    /* For regular async urbs */
+    USBPacket     *packet;
+    int more; /* large transfer, more urbs follow */
+
+    /* For buffered iso handling */
+    int iso_frame_idx; /* -1 means in flight */
+};
+
+static AsyncURB *async_alloc(USBHostDevice *s)
+{
+    AsyncURB *aurb = g_malloc0(sizeof(AsyncURB));
+    aurb->hdev = s;
+    QLIST_INSERT_HEAD(&s->aurbs, aurb, next);
+    return aurb;
+}
+
+static void async_free(AsyncURB *aurb)
+{
+    QLIST_REMOVE(aurb, next);
+    g_free(aurb);
+}
+
+static void do_disconnect(USBHostDevice *s)
+{
+    usb_host_close(s);
+    usb_host_auto_check(NULL);
+}
+
+static void async_complete(void *opaque)
+{
+    USBHostDevice *s = opaque;
+    AsyncURB *aurb;
+    int urbs = 0;
+
+    while (1) {
+        USBPacket *p;
+
+        int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb);
+        if (r < 0) {
+            if (errno == EAGAIN) {
+                if (urbs > 2) {
+                    fprintf(stderr, "husb: %d iso urbs finished at once\n", urbs);
+                }
+                return;
+            }
+            if (errno == ENODEV) {
+                if (!s->closing) {
+                    trace_usb_host_disconnect(s->bus_num, s->addr);
+                    do_disconnect(s);
+                }
+                return;
+            }
+
+            perror("USBDEVFS_REAPURBNDELAY");
+            return;
+        }
+
+        DPRINTF("husb: async completed. aurb %p status %d alen %d\n",
+                aurb, aurb->urb.status, aurb->urb.actual_length);
+
+        /* If this is a buffered iso urb mark it as complete and don't do
+           anything else (it is handled further in usb_host_handle_iso_data) */
+        if (aurb->iso_frame_idx == -1) {
+            int inflight;
+            int pid = (aurb->urb.endpoint & USB_DIR_IN) ?
+                USB_TOKEN_IN : USB_TOKEN_OUT;
+            int ep = aurb->urb.endpoint & 0xf;
+            if (aurb->urb.status == -EPIPE) {
+                set_halt(s, pid, ep);
+            }
+            aurb->iso_frame_idx = 0;
+            urbs++;
+            inflight = change_iso_inflight(s, pid, ep, -1);
+            if (inflight == 0 && is_iso_started(s, pid, ep)) {
+                fprintf(stderr, "husb: out of buffers for iso stream\n");
+            }
+            continue;
+        }
+
+        p = aurb->packet;
+        trace_usb_host_urb_complete(s->bus_num, s->addr, aurb, aurb->urb.status,
+                                    aurb->urb.actual_length, aurb->more);
+
+        if (p) {
+            switch (aurb->urb.status) {
+            case 0:
+                p->result += aurb->urb.actual_length;
+                break;
+
+            case -EPIPE:
+                set_halt(s, p->pid, p->ep->nr);
+                p->result = USB_RET_STALL;
+                break;
+
+            case -EOVERFLOW:
+                p->result = USB_RET_BABBLE;
+                break;
+
+            default:
+                p->result = USB_RET_IOERROR;
+                break;
+            }
+
+            if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL) {
+                trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
+                usb_generic_async_ctrl_complete(&s->dev, p);
+            } else if (!aurb->more) {
+                trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
+                usb_packet_complete(&s->dev, p);
+            }
+        }
+
+        async_free(aurb);
+    }
+}
+
+static void usb_host_async_cancel(USBDevice *dev, USBPacket *p)
+{
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+    AsyncURB *aurb;
+
+    QLIST_FOREACH(aurb, &s->aurbs, next) {
+        if (p != aurb->packet) {
+            continue;
+        }
+
+        DPRINTF("husb: async cancel: packet %p, aurb %p\n", p, aurb);
+
+        /* Mark it as dead (see async_complete above) */
+        aurb->packet = NULL;
+
+        int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb);
+        if (r < 0) {
+            DPRINTF("husb: async. discard urb failed errno %d\n", errno);
+        }
+    }
+}
+
+static int usb_host_open_device(int bus, int addr)
+{
+    const char *usbfs = NULL;
+    char filename[32];
+    struct stat st;
+    int fd, rc;
+
+    rc = stat("/dev/bus/usb", &st);
+    if (rc == 0 && S_ISDIR(st.st_mode)) {
+        /* udev-created device nodes available */
+        usbfs = "/dev/bus/usb";
+    } else {
+        /* fallback: usbfs mounted below /proc */
+        usbfs = "/proc/bus/usb";
+    }
+
+    snprintf(filename, sizeof(filename), "%s/%03d/%03d",
+             usbfs, bus, addr);
+    fd = open(filename, O_RDWR | O_NONBLOCK);
+    if (fd < 0) {
+        fprintf(stderr, "husb: open %s: %s\n", filename, strerror(errno));
+    }
+    return fd;
+}
+
+static int usb_host_claim_port(USBHostDevice *s)
+{
+#ifdef USBDEVFS_CLAIM_PORT
+    char *h, hub_name[64], line[1024];
+    int hub_addr, ret;
+
+    snprintf(hub_name, sizeof(hub_name), "%d-%s",
+             s->match.bus_num, s->match.port);
+
+    /* try strip off last ".$portnr" to get hub */
+    h = strrchr(hub_name, '.');
+    if (h != NULL) {
+        s->hub_port = atoi(h+1);
+        *h = '\0';
+    } else {
+        /* no dot in there -> it is the root hub */
+        snprintf(hub_name, sizeof(hub_name), "usb%d",
+                 s->match.bus_num);
+        s->hub_port = atoi(s->match.port);
+    }
+
+    if (!usb_host_read_file(line, sizeof(line), "devnum",
+                            hub_name)) {
+        return -1;
+    }
+    if (sscanf(line, "%d", &hub_addr) != 1) {
+        return -1;
+    }
+
+    s->hub_fd = usb_host_open_device(s->match.bus_num, hub_addr);
+    if (s->hub_fd < 0) {
+        return -1;
+    }
+
+    ret = ioctl(s->hub_fd, USBDEVFS_CLAIM_PORT, &s->hub_port);
+    if (ret < 0) {
+        close(s->hub_fd);
+        s->hub_fd = -1;
+        return -1;
+    }
+
+    trace_usb_host_claim_port(s->match.bus_num, hub_addr, s->hub_port);
+    return 0;
+#else
+    return -1;
+#endif
+}
+
+static void usb_host_release_port(USBHostDevice *s)
+{
+    if (s->hub_fd == -1) {
+        return;
+    }
+#ifdef USBDEVFS_RELEASE_PORT
+    ioctl(s->hub_fd, USBDEVFS_RELEASE_PORT, &s->hub_port);
+#endif
+    close(s->hub_fd);
+    s->hub_fd = -1;
+}
+
+static int usb_host_disconnect_ifaces(USBHostDevice *dev, int nb_interfaces)
+{
+    /* earlier Linux 2.4 do not support that */
+#ifdef USBDEVFS_DISCONNECT
+    struct usbdevfs_ioctl ctrl;
+    int ret, interface;
+
+    for (interface = 0; interface < nb_interfaces; interface++) {
+        ctrl.ioctl_code = USBDEVFS_DISCONNECT;
+        ctrl.ifno = interface;
+        ctrl.data = 0;
+        ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl);
+        if (ret < 0 && errno != ENODATA) {
+            perror("USBDEVFS_DISCONNECT");
+            return -1;
+        }
+    }
+#endif
+    return 0;
+}
+
+static int usb_linux_get_num_interfaces(USBHostDevice *s)
+{
+    char device_name[64], line[1024];
+    int num_interfaces = 0;
+
+    sprintf(device_name, "%d-%s", s->bus_num, s->port);
+    if (!usb_host_read_file(line, sizeof(line), "bNumInterfaces",
+                            device_name)) {
+        return -1;
+    }
+    if (sscanf(line, "%d", &num_interfaces) != 1) {
+        return -1;
+    }
+    return num_interfaces;
+}
+
+static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
+{
+    const char *op = NULL;
+    int dev_descr_len, config_descr_len;
+    int interface, nb_interfaces;
+    int ret, i;
+
+    for (i = 0; i < USB_MAX_INTERFACES; i++) {
+        dev->dev.altsetting[i] = 0;
+    }
+
+    if (configuration == 0) { /* address state - ignore */
+        dev->dev.ninterfaces   = 0;
+        dev->dev.configuration = 0;
+        return 1;
+    }
+
+    DPRINTF("husb: claiming interfaces. config %d\n", configuration);
+
+    i = 0;
+    dev_descr_len = dev->descr[0];
+    if (dev_descr_len > dev->descr_len) {
+        fprintf(stderr, "husb: update iface failed. descr too short\n");
+        return 0;
+    }
+
+    i += dev_descr_len;
+    while (i < dev->descr_len) {
+        DPRINTF("husb: i is %d, descr_len is %d, dl %d, dt %d\n",
+                i, dev->descr_len,
+               dev->descr[i], dev->descr[i+1]);
+
+        if (dev->descr[i+1] != USB_DT_CONFIG) {
+            i += dev->descr[i];
+            continue;
+        }
+        config_descr_len = dev->descr[i];
+
+        DPRINTF("husb: config #%d need %d\n", dev->descr[i + 5], configuration);
+
+        if (configuration == dev->descr[i + 5]) {
+            configuration = dev->descr[i + 5];
+            break;
+        }
+
+        i += config_descr_len;
+    }
+
+    if (i >= dev->descr_len) {
+        fprintf(stderr,
+                "husb: update iface failed. no matching configuration\n");
+        return 0;
+    }
+    nb_interfaces = dev->descr[i + 4];
+
+    if (usb_host_disconnect_ifaces(dev, nb_interfaces) < 0) {
+        goto fail;
+    }
+
+    /* XXX: only grab if all interfaces are free */
+    for (interface = 0; interface < nb_interfaces; interface++) {
+        op = "USBDEVFS_CLAIMINTERFACE";
+        ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface);
+        if (ret < 0) {
+            goto fail;
+        }
+    }
+
+    trace_usb_host_claim_interfaces(dev->bus_num, dev->addr,
+                                    nb_interfaces, configuration);
+
+    dev->dev.ninterfaces   = nb_interfaces;
+    dev->dev.configuration = configuration;
+    return 1;
+
+fail:
+    if (errno == ENODEV) {
+        do_disconnect(dev);
+    }
+    perror(op);
+    return 0;
+}
+
+static int usb_host_release_interfaces(USBHostDevice *s)
+{
+    int ret, i;
+
+    trace_usb_host_release_interfaces(s->bus_num, s->addr);
+
+    for (i = 0; i < s->dev.ninterfaces; i++) {
+        ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i);
+        if (ret < 0) {
+            perror("USBDEVFS_RELEASEINTERFACE");
+            return 0;
+        }
+    }
+    return 1;
+}
+
+static void usb_host_handle_reset(USBDevice *dev)
+{
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+
+    trace_usb_host_reset(s->bus_num, s->addr);
+
+    usb_host_do_reset(s);;
+
+    usb_host_claim_interfaces(s, 0);
+    usb_linux_update_endp_table(s);
+}
+
+static void usb_host_handle_destroy(USBDevice *dev)
+{
+    USBHostDevice *s = (USBHostDevice *)dev;
+
+    usb_host_release_port(s);
+    usb_host_close(s);
+    QTAILQ_REMOVE(&hostdevs, s, next);
+    qemu_remove_exit_notifier(&s->exit);
+}
+
+/* iso data is special, we need to keep enough urbs in flight to make sure
+   that the controller never runs out of them, otherwise the device will
+   likely suffer a buffer underrun / overrun. */
+static AsyncURB *usb_host_alloc_iso(USBHostDevice *s, int pid, uint8_t ep)
+{
+    AsyncURB *aurb;
+    int i, j, len = usb_ep_get_max_packet_size(&s->dev, pid, ep);
+
+    aurb = g_malloc0(s->iso_urb_count * sizeof(*aurb));
+    for (i = 0; i < s->iso_urb_count; i++) {
+        aurb[i].urb.endpoint      = ep;
+        aurb[i].urb.buffer_length = ISO_FRAME_DESC_PER_URB * len;
+        aurb[i].urb.buffer        = g_malloc(aurb[i].urb.buffer_length);
+        aurb[i].urb.type          = USBDEVFS_URB_TYPE_ISO;
+        aurb[i].urb.flags         = USBDEVFS_URB_ISO_ASAP;
+        aurb[i].urb.number_of_packets = ISO_FRAME_DESC_PER_URB;
+        for (j = 0 ; j < ISO_FRAME_DESC_PER_URB; j++)
+            aurb[i].urb.iso_frame_desc[j].length = len;
+        if (pid == USB_TOKEN_IN) {
+            aurb[i].urb.endpoint |= 0x80;
+            /* Mark as fully consumed (idle) */
+            aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB;
+        }
+    }
+    set_iso_urb(s, pid, ep, aurb);
+
+    return aurb;
+}
+
+static void usb_host_stop_n_free_iso(USBHostDevice *s, int pid, uint8_t ep)
+{
+    AsyncURB *aurb;
+    int i, ret, killed = 0, free = 1;
+
+    aurb = get_iso_urb(s, pid, ep);
+    if (!aurb) {
+        return;
+    }
+
+    for (i = 0; i < s->iso_urb_count; i++) {
+        /* in flight? */
+        if (aurb[i].iso_frame_idx == -1) {
+            ret = ioctl(s->fd, USBDEVFS_DISCARDURB, &aurb[i]);
+            if (ret < 0) {
+                perror("USBDEVFS_DISCARDURB");
+                free = 0;
+                continue;
+            }
+            killed++;
+        }
+    }
+
+    /* Make sure any urbs we've killed are reaped before we free them */
+    if (killed) {
+        async_complete(s);
+    }
+
+    for (i = 0; i < s->iso_urb_count; i++) {
+        g_free(aurb[i].urb.buffer);
+    }
+
+    if (free)
+        g_free(aurb);
+    else
+        printf("husb: leaking iso urbs because of discard failure\n");
+    set_iso_urb(s, pid, ep, NULL);
+    set_iso_urb_idx(s, pid, ep, 0);
+    clear_iso_started(s, pid, ep);
+}
+
+static int urb_status_to_usb_ret(int status)
+{
+    switch (status) {
+    case -EPIPE:
+        return USB_RET_STALL;
+    case -EOVERFLOW:
+        return USB_RET_BABBLE;
+    default:
+        return USB_RET_IOERROR;
+    }
+}
+
+static int usb_host_handle_iso_data(USBHostDevice *s, USBPacket *p, int in)
+{
+    AsyncURB *aurb;
+    int i, j, ret, max_packet_size, offset, len = 0;
+    uint8_t *buf;
+
+    max_packet_size = p->ep->max_packet_size;
+    if (max_packet_size == 0)
+        return USB_RET_NAK;
+
+    aurb = get_iso_urb(s, p->pid, p->ep->nr);
+    if (!aurb) {
+        aurb = usb_host_alloc_iso(s, p->pid, p->ep->nr);
+    }
+
+    i = get_iso_urb_idx(s, p->pid, p->ep->nr);
+    j = aurb[i].iso_frame_idx;
+    if (j >= 0 && j < ISO_FRAME_DESC_PER_URB) {
+        if (in) {
+            /* Check urb status  */
+            if (aurb[i].urb.status) {
+                len = urb_status_to_usb_ret(aurb[i].urb.status);
+                /* Move to the next urb */
+                aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB - 1;
+            /* Check frame status */
+            } else if (aurb[i].urb.iso_frame_desc[j].status) {
+                len = urb_status_to_usb_ret(
+                                        aurb[i].urb.iso_frame_desc[j].status);
+            /* Check the frame fits */
+            } else if (aurb[i].urb.iso_frame_desc[j].actual_length
+                       > p->iov.size) {
+                printf("husb: received iso data is larger then packet\n");
+                len = USB_RET_BABBLE;
+            /* All good copy data over */
+            } else {
+                len = aurb[i].urb.iso_frame_desc[j].actual_length;
+                buf  = aurb[i].urb.buffer +
+                    j * aurb[i].urb.iso_frame_desc[0].length;
+                usb_packet_copy(p, buf, len);
+            }
+        } else {
+            len = p->iov.size;
+            offset = (j == 0) ? 0 : get_iso_buffer_used(s, p->pid, p->ep->nr);
+
+            /* Check the frame fits */
+            if (len > max_packet_size) {
+                printf("husb: send iso data is larger then max packet size\n");
+                return USB_RET_NAK;
+            }
+
+            /* All good copy data over */
+            usb_packet_copy(p, aurb[i].urb.buffer + offset, len);
+            aurb[i].urb.iso_frame_desc[j].length = len;
+            offset += len;
+            set_iso_buffer_used(s, p->pid, p->ep->nr, offset);
+
+            /* Start the stream once we have buffered enough data */
+            if (!is_iso_started(s, p->pid, p->ep->nr) && i == 1 && j == 8) {
+                set_iso_started(s, p->pid, p->ep->nr);
+            }
+        }
+        aurb[i].iso_frame_idx++;
+        if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
+            i = (i + 1) % s->iso_urb_count;
+            set_iso_urb_idx(s, p->pid, p->ep->nr, i);
+        }
+    } else {
+        if (in) {
+            set_iso_started(s, p->pid, p->ep->nr);
+        } else {
+            DPRINTF("hubs: iso out error no free buffer, dropping packet\n");
+        }
+    }
+
+    if (is_iso_started(s, p->pid, p->ep->nr)) {
+        /* (Re)-submit all fully consumed / filled urbs */
+        for (i = 0; i < s->iso_urb_count; i++) {
+            if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
+                ret = ioctl(s->fd, USBDEVFS_SUBMITURB, &aurb[i]);
+                if (ret < 0) {
+                    perror("USBDEVFS_SUBMITURB");
+                    if (!in || len == 0) {
+                        switch(errno) {
+                        case ETIMEDOUT:
+                            len = USB_RET_NAK;
+                            break;
+                        case EPIPE:
+                        default:
+                            len = USB_RET_STALL;
+                        }
+                    }
+                    break;
+                }
+                aurb[i].iso_frame_idx = -1;
+                change_iso_inflight(s, p->pid, p->ep->nr, 1);
+            }
+        }
+    }
+
+    return len;
+}
+
+static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
+{
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+    struct usbdevfs_urb *urb;
+    AsyncURB *aurb;
+    int ret, rem, prem, v;
+    uint8_t *pbuf;
+    uint8_t ep;
+
+    trace_usb_host_req_data(s->bus_num, s->addr,
+                            p->pid == USB_TOKEN_IN,
+                            p->ep->nr, p->iov.size);
+
+    if (!is_valid(s, p->pid, p->ep->nr)) {
+        trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+        return USB_RET_NAK;
+    }
+
+    if (p->pid == USB_TOKEN_IN) {
+        ep = p->ep->nr | 0x80;
+    } else {
+        ep = p->ep->nr;
+    }
+
+    if (is_halted(s, p->pid, p->ep->nr)) {
+        unsigned int arg = ep;
+        ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &arg);
+        if (ret < 0) {
+            perror("USBDEVFS_CLEAR_HALT");
+            trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+            return USB_RET_NAK;
+        }
+        clear_halt(s, p->pid, p->ep->nr);
+    }
+
+    if (is_isoc(s, p->pid, p->ep->nr)) {
+        return usb_host_handle_iso_data(s, p, p->pid == USB_TOKEN_IN);
+    }
+
+    v = 0;
+    prem = p->iov.iov[v].iov_len;
+    pbuf = p->iov.iov[v].iov_base;
+    rem = p->iov.size;
+    while (rem) {
+        if (prem == 0) {
+            v++;
+            assert(v < p->iov.niov);
+            prem = p->iov.iov[v].iov_len;
+            pbuf = p->iov.iov[v].iov_base;
+            assert(prem <= rem);
+        }
+        aurb = async_alloc(s);
+        aurb->packet = p;
+
+        urb = &aurb->urb;
+        urb->endpoint      = ep;
+        urb->type          = usb_host_usbfs_type(s, p);
+        urb->usercontext   = s;
+        urb->buffer        = pbuf;
+        urb->buffer_length = prem;
+
+        if (urb->buffer_length > MAX_USBFS_BUFFER_SIZE) {
+            urb->buffer_length = MAX_USBFS_BUFFER_SIZE;
+        }
+        pbuf += urb->buffer_length;
+        prem -= urb->buffer_length;
+        rem  -= urb->buffer_length;
+        if (rem) {
+            aurb->more         = 1;
+        }
+
+        trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
+                                  urb->buffer_length, aurb->more);
+        ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+        DPRINTF("husb: data submit: ep 0x%x, len %u, more %d, packet %p, aurb %p\n",
+                urb->endpoint, urb->buffer_length, aurb->more, p, aurb);
+
+        if (ret < 0) {
+            perror("USBDEVFS_SUBMITURB");
+            async_free(aurb);
+
+            switch(errno) {
+            case ETIMEDOUT:
+                trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
+                return USB_RET_NAK;
+            case EPIPE:
+            default:
+                trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_STALL);
+                return USB_RET_STALL;
+            }
+        }
+    }
+
+    return USB_RET_ASYNC;
+}
+
+static int ctrl_error(void)
+{
+    if (errno == ETIMEDOUT) {
+        return USB_RET_NAK;
+    } else {
+        return USB_RET_STALL;
+    }
+}
+
+static int usb_host_set_address(USBHostDevice *s, int addr)
+{
+    trace_usb_host_set_address(s->bus_num, s->addr, addr);
+    s->dev.addr = addr;
+    return 0;
+}
+
+static int usb_host_set_config(USBHostDevice *s, int config)
+{
+    int ret, first = 1;
+
+    trace_usb_host_set_config(s->bus_num, s->addr, config);
+
+    usb_host_release_interfaces(s);
+
+again:
+    ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config);
+
+    DPRINTF("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno);
+
+    if (ret < 0 && errno == EBUSY && first) {
+        /* happens if usb device is in use by host drivers */
+        int count = usb_linux_get_num_interfaces(s);
+        if (count > 0) {
+            DPRINTF("husb: busy -> disconnecting %d interfaces\n", count);
+            usb_host_disconnect_ifaces(s, count);
+            first = 0;
+            goto again;
+        }
+    }
+
+    if (ret < 0) {
+        return ctrl_error();
+    }
+    usb_host_claim_interfaces(s, config);
+    usb_linux_update_endp_table(s);
+    return 0;
+}
+
+static int usb_host_set_interface(USBHostDevice *s, int iface, int alt)
+{
+    struct usbdevfs_setinterface si;
+    int i, ret;
+
+    trace_usb_host_set_interface(s->bus_num, s->addr, iface, alt);
+
+    for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
+        if (is_isoc(s, USB_TOKEN_IN, i)) {
+            usb_host_stop_n_free_iso(s, USB_TOKEN_IN, i);
+        }
+        if (is_isoc(s, USB_TOKEN_OUT, i)) {
+            usb_host_stop_n_free_iso(s, USB_TOKEN_OUT, i);
+        }
+    }
+
+    if (iface >= USB_MAX_INTERFACES) {
+        return USB_RET_STALL;
+    }
+
+    si.interface  = iface;
+    si.altsetting = alt;
+    ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si);
+
+    DPRINTF("husb: ctrl set iface %d altset %d ret %d errno %d\n",
+            iface, alt, ret, errno);
+
+    if (ret < 0) {
+        return ctrl_error();
+    }
+
+    s->dev.altsetting[iface] = alt;
+    usb_linux_update_endp_table(s);
+    return 0;
+}
+
+static int usb_host_handle_control(USBDevice *dev, USBPacket *p,
+               int request, int value, int index, int length, uint8_t *data)
+{
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+    struct usbdevfs_urb *urb;
+    AsyncURB *aurb;
+    int ret;
+
+    /*
+     * Process certain standard device requests.
+     * These are infrequent and are processed synchronously.
+     */
+
+    /* Note request is (bRequestType << 8) | bRequest */
+    trace_usb_host_req_control(s->bus_num, s->addr, request, value, index);
+
+    switch (request) {
+    case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+        return usb_host_set_address(s, value);
+
+    case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+        return usb_host_set_config(s, value & 0xff);
+
+    case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+        return usb_host_set_interface(s, index, value);
+    }
+
+    /* The rest are asynchronous */
+
+    if (length > sizeof(dev->data_buf)) {
+        fprintf(stderr, "husb: ctrl buffer too small (%d > %zu)\n",
+                length, sizeof(dev->data_buf));
+        return USB_RET_STALL;
+    }
+
+    aurb = async_alloc(s);
+    aurb->packet = p;
+
+    /*
+     * Setup ctrl transfer.
+     *
+     * s->ctrl is laid out such that data buffer immediately follows
+     * 'req' struct which is exactly what usbdevfs expects.
+     */
+    urb = &aurb->urb;
+
+    urb->type     = USBDEVFS_URB_TYPE_CONTROL;
+    urb->endpoint = p->ep->nr;
+
+    urb->buffer        = &dev->setup_buf;
+    urb->buffer_length = length + 8;
+
+    urb->usercontext = s;
+
+    trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
+                              urb->buffer_length, aurb->more);
+    ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
+
+    DPRINTF("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb);
+
+    if (ret < 0) {
+        DPRINTF("husb: submit failed. errno %d\n", errno);
+        async_free(aurb);
+
+        switch(errno) {
+        case ETIMEDOUT:
+            return USB_RET_NAK;
+        case EPIPE:
+        default:
+            return USB_RET_STALL;
+        }
+    }
+
+    return USB_RET_ASYNC;
+}
+
+static uint8_t usb_linux_get_alt_setting(USBHostDevice *s,
+    uint8_t configuration, uint8_t interface)
+{
+    char device_name[64], line[1024];
+    int alt_setting;
+
+    sprintf(device_name, "%d-%s:%d.%d", s->bus_num, s->port,
+            (int)configuration, (int)interface);
+
+    if (!usb_host_read_file(line, sizeof(line), "bAlternateSetting",
+                            device_name)) {
+        /* Assume alt 0 on error */
+        return 0;
+    }
+    if (sscanf(line, "%d", &alt_setting) != 1) {
+        /* Assume alt 0 on error */
+        return 0;
+    }
+    return alt_setting;
+}
+
+/* returns 1 on problem encountered or 0 for success */
+static int usb_linux_update_endp_table(USBHostDevice *s)
+{
+    uint8_t *descriptors;
+    uint8_t devep, type, alt_interface;
+    uint16_t raw;
+    int interface, length, i, ep, pid;
+    struct endp_data *epd;
+
+    usb_ep_init(&s->dev);
+
+    if (s->dev.configuration == 0) {
+        /* not configured yet -- leave all endpoints disabled */
+        return 0;
+    }
+
+    /* get the desired configuration, interface, and endpoint descriptors
+     * from device description */
+    descriptors = &s->descr[18];
+    length = s->descr_len - 18;
+    i = 0;
+
+    while (i < length) {
+        if (descriptors[i + 1] != USB_DT_CONFIG) {
+            fprintf(stderr, "invalid descriptor data\n");
+            return 1;
+        } else if (descriptors[i + 5] != s->dev.configuration) {
+            DPRINTF("not requested configuration %d\n", s->dev.configuration);
+            i += (descriptors[i + 3] << 8) + descriptors[i + 2];
+            continue;
+        }
+        i += descriptors[i];
+
+        if (descriptors[i + 1] != USB_DT_INTERFACE ||
+            (descriptors[i + 1] == USB_DT_INTERFACE &&
+             descriptors[i + 4] == 0)) {
+            i += descriptors[i];
+            continue;
+        }
+
+        interface = descriptors[i + 2];
+        alt_interface = usb_linux_get_alt_setting(s, s->dev.configuration,
+                                                  interface);
+
+        /* the current interface descriptor is the active interface
+         * and has endpoints */
+        if (descriptors[i + 3] != alt_interface) {
+            i += descriptors[i];
+            continue;
+        }
+
+        /* advance to the endpoints */
+        while (i < length && descriptors[i +1] != USB_DT_ENDPOINT) {
+            i += descriptors[i];
+        }
+
+        if (i >= length)
+            break;
+
+        while (i < length) {
+            if (descriptors[i + 1] != USB_DT_ENDPOINT) {
+                break;
+            }
+
+            devep = descriptors[i + 2];
+            pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT;
+            ep = devep & 0xf;
+            if (ep == 0) {
+                fprintf(stderr, "usb-linux: invalid ep descriptor, ep == 0\n");
+                return 1;
+            }
+
+            type = descriptors[i + 3] & 0x3;
+            raw = descriptors[i + 4] + (descriptors[i + 5] << 8);
+            usb_ep_set_max_packet_size(&s->dev, pid, ep, raw);
+            assert(usb_ep_get_type(&s->dev, pid, ep) ==
+                   USB_ENDPOINT_XFER_INVALID);
+            usb_ep_set_type(&s->dev, pid, ep, type);
+            usb_ep_set_ifnum(&s->dev, pid, ep, interface);
+            if (type == USB_ENDPOINT_XFER_BULK) {
+                usb_ep_set_pipeline(&s->dev, pid, ep, true);
+            }
+
+            epd = get_endp(s, pid, ep);
+            epd->halted = 0;
+
+            i += descriptors[i];
+        }
+    }
+#ifdef DEBUG
+    usb_ep_dump(&s->dev);
+#endif
+    return 0;
+}
+
+/*
+ * Check if we can safely redirect a usb2 device to a usb1 virtual controller,
+ * this function assumes this is safe, if:
+ * 1) There are no isoc endpoints
+ * 2) There are no interrupt endpoints with a max_packet_size > 64
+ * Note bulk endpoints with a max_packet_size > 64 in theory also are not
+ * usb1 compatible, but in practice this seems to work fine.
+ */
+static int usb_linux_full_speed_compat(USBHostDevice *dev)
+{
+    int i, packet_size;
+
+    /*
+     * usb_linux_update_endp_table only registers info about ep in the current
+     * interface altsettings, so we need to parse the descriptors again.
+     */
+    for (i = 0; (i + 5) < dev->descr_len; i += dev->descr[i]) {
+        if (dev->descr[i + 1] == USB_DT_ENDPOINT) {
+            switch (dev->descr[i + 3] & 0x3) {
+            case 0x00: /* CONTROL */
+                break;
+            case 0x01: /* ISO */
+                return 0;
+            case 0x02: /* BULK */
+                break;
+            case 0x03: /* INTERRUPT */
+                packet_size = dev->descr[i + 4] + (dev->descr[i + 5] << 8);
+                if (packet_size > 64)
+                    return 0;
+                break;
+            }
+        }
+    }
+    return 1;
+}
+
+static int usb_host_open(USBHostDevice *dev, int bus_num,
+                         int addr, const char *port,
+                         const char *prod_name, int speed)
+{
+    int fd = -1, ret;
+
+    trace_usb_host_open_started(bus_num, addr);
+
+    if (dev->fd != -1) {
+        goto fail;
+    }
+
+    fd = usb_host_open_device(bus_num, addr);
+    if (fd < 0) {
+        goto fail;
+    }
+    DPRINTF("husb: opened %s\n", buf);
+
+    dev->bus_num = bus_num;
+    dev->addr = addr;
+    strcpy(dev->port, port);
+    dev->fd = fd;
+
+    /* read the device description */
+    dev->descr_len = read(fd, dev->descr, sizeof(dev->descr));
+    if (dev->descr_len <= 0) {
+        perror("husb: reading device data failed");
+        goto fail;
+    }
+
+#ifdef DEBUG
+    {
+        int x;
+        printf("=== begin dumping device descriptor data ===\n");
+        for (x = 0; x < dev->descr_len; x++) {
+            printf("%02x ", dev->descr[x]);
+        }
+        printf("\n=== end dumping device descriptor data ===\n");
+    }
+#endif
+
+
+    /* start unconfigured -- we'll wait for the guest to set a configuration */
+    if (!usb_host_claim_interfaces(dev, 0)) {
+        goto fail;
+    }
+
+    ret = usb_linux_update_endp_table(dev);
+    if (ret) {
+        goto fail;
+    }
+
+    if (speed == -1) {
+        struct usbdevfs_connectinfo ci;
+
+        ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
+        if (ret < 0) {
+            perror("usb_host_device_open: USBDEVFS_CONNECTINFO");
+            goto fail;
+        }
+
+        if (ci.slow) {
+            speed = USB_SPEED_LOW;
+        } else {
+            speed = USB_SPEED_HIGH;
+        }
+    }
+    dev->dev.speed = speed;
+    dev->dev.speedmask = (1 << speed);
+    if (dev->dev.speed == USB_SPEED_HIGH && usb_linux_full_speed_compat(dev)) {
+        dev->dev.speedmask |= USB_SPEED_MASK_FULL;
+    }
+
+    trace_usb_host_open_success(bus_num, addr);
+
+    if (!prod_name || prod_name[0] == '\0') {
+        snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+                 "host:%d.%d", bus_num, addr);
+    } else {
+        pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc),
+                prod_name);
+    }
+
+    ret = usb_device_attach(&dev->dev);
+    if (ret) {
+        goto fail;
+    }
+
+    /* USB devio uses 'write' flag to check for async completions */
+    qemu_set_fd_handler(dev->fd, NULL, async_complete, dev);
+
+    return 0;
+
+fail:
+    trace_usb_host_open_failure(bus_num, addr);
+    if (dev->fd != -1) {
+        close(dev->fd);
+        dev->fd = -1;
+    }
+    return -1;
+}
+
+static int usb_host_close(USBHostDevice *dev)
+{
+    int i;
+
+    if (dev->fd == -1) {
+        return -1;
+    }
+
+    trace_usb_host_close(dev->bus_num, dev->addr);
+
+    qemu_set_fd_handler(dev->fd, NULL, NULL, NULL);
+    dev->closing = 1;
+    for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
+        if (is_isoc(dev, USB_TOKEN_IN, i)) {
+            usb_host_stop_n_free_iso(dev, USB_TOKEN_IN, i);
+        }
+        if (is_isoc(dev, USB_TOKEN_OUT, i)) {
+            usb_host_stop_n_free_iso(dev, USB_TOKEN_OUT, i);
+        }
+    }
+    async_complete(dev);
+    dev->closing = 0;
+    if (dev->dev.attached) {
+        usb_device_detach(&dev->dev);
+    }
+    usb_host_do_reset(dev);
+    close(dev->fd);
+    dev->fd = -1;
+    return 0;
+}
+
+static void usb_host_exit_notifier(struct Notifier *n, void *data)
+{
+    USBHostDevice *s = container_of(n, USBHostDevice, exit);
+
+    usb_host_release_port(s);
+    if (s->fd != -1) {
+        usb_host_do_reset(s);;
+    }
+}
+
+static int usb_host_initfn(USBDevice *dev)
+{
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+
+    dev->auto_attach = 0;
+    s->fd = -1;
+    s->hub_fd = -1;
+
+    QTAILQ_INSERT_TAIL(&hostdevs, s, next);
+    s->exit.notify = usb_host_exit_notifier;
+    qemu_add_exit_notifier(&s->exit);
+    usb_host_auto_check(NULL);
+
+    if (s->match.bus_num != 0 && s->match.port != NULL) {
+        usb_host_claim_port(s);
+    }
+    return 0;
+}
+
+static const VMStateDescription vmstate_usb_host = {
+    .name = "usb-host",
+    .unmigratable = 1,
+};
+
+static Property usb_host_dev_properties[] = {
+    DEFINE_PROP_UINT32("hostbus",  USBHostDevice, match.bus_num,    0),
+    DEFINE_PROP_UINT32("hostaddr", USBHostDevice, match.addr,       0),
+    DEFINE_PROP_STRING("hostport", USBHostDevice, match.port),
+    DEFINE_PROP_HEX32("vendorid",  USBHostDevice, match.vendor_id,  0),
+    DEFINE_PROP_HEX32("productid", USBHostDevice, match.product_id, 0),
+    DEFINE_PROP_UINT32("isobufs",  USBHostDevice, iso_urb_count,    4),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usb_host_class_initfn(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+
+    uc->init           = usb_host_initfn;
+    uc->product_desc   = "USB Host Device";
+    uc->cancel_packet  = usb_host_async_cancel;
+    uc->handle_data    = usb_host_handle_data;
+    uc->handle_control = usb_host_handle_control;
+    uc->handle_reset   = usb_host_handle_reset;
+    uc->handle_destroy = usb_host_handle_destroy;
+    dc->vmsd = &vmstate_usb_host;
+    dc->props = usb_host_dev_properties;
+}
+
+static TypeInfo usb_host_dev_info = {
+    .name          = "usb-host",
+    .parent        = TYPE_USB_DEVICE,
+    .instance_size = sizeof(USBHostDevice),
+    .class_init    = usb_host_class_initfn,
+};
+
+static void usb_host_register_types(void)
+{
+    type_register_static(&usb_host_dev_info);
+    usb_legacy_register("usb-host", "host", usb_host_device_open);
+}
+
+type_init(usb_host_register_types)
+
+USBDevice *usb_host_device_open(USBBus *bus, const char *devname)
+{
+    struct USBAutoFilter filter;
+    USBDevice *dev;
+    char *p;
+
+    dev = usb_create(bus, "usb-host");
+
+    if (strstr(devname, "auto:")) {
+        if (parse_filter(devname, &filter) < 0) {
+            goto fail;
+        }
+    } else {
+        if ((p = strchr(devname, '.'))) {
+            filter.bus_num    = strtoul(devname, NULL, 0);
+            filter.addr       = strtoul(p + 1, NULL, 0);
+            filter.vendor_id  = 0;
+            filter.product_id = 0;
+        } else if ((p = strchr(devname, ':'))) {
+            filter.bus_num    = 0;
+            filter.addr       = 0;
+            filter.vendor_id  = strtoul(devname, NULL, 16);
+            filter.product_id = strtoul(p + 1, NULL, 16);
+        } else {
+            goto fail;
+        }
+    }
+
+    qdev_prop_set_uint32(&dev->qdev, "hostbus",   filter.bus_num);
+    qdev_prop_set_uint32(&dev->qdev, "hostaddr",  filter.addr);
+    qdev_prop_set_uint32(&dev->qdev, "vendorid",  filter.vendor_id);
+    qdev_prop_set_uint32(&dev->qdev, "productid", filter.product_id);
+    qdev_init_nofail(&dev->qdev);
+    return dev;
+
+fail:
+    qdev_free(&dev->qdev);
+    return NULL;
+}
+
+int usb_host_device_close(const char *devname)
+{
+#if 0
+    char product_name[PRODUCT_NAME_SZ];
+    int bus_num, addr;
+    USBHostDevice *s;
+
+    if (strstr(devname, "auto:")) {
+        return usb_host_auto_del(devname);
+    }
+    if (usb_host_find_device(&bus_num, &addr, product_name,
+                                    sizeof(product_name), devname) < 0) {
+        return -1;
+    }
+    s = hostdev_find(bus_num, addr);
+    if (s) {
+        usb_device_delete_addr(s->bus_num, s->dev.addr);
+        return 0;
+    }
+#endif
+
+    return -1;
+}
+
+/*
+ * Read sys file-system device file
+ *
+ * @line address of buffer to put file contents in
+ * @line_size size of line
+ * @device_file path to device file (printf format string)
+ * @device_name device being opened (inserted into device_file)
+ *
+ * @return 0 failed, 1 succeeded ('line' contains data)
+ */
+static int usb_host_read_file(char *line, size_t line_size,
+                              const char *device_file, const char *device_name)
+{
+    FILE *f;
+    int ret = 0;
+    char filename[PATH_MAX];
+
+    snprintf(filename, PATH_MAX, "/sys/bus/usb/devices/%s/%s", device_name,
+             device_file);
+    f = fopen(filename, "r");
+    if (f) {
+        ret = fgets(line, line_size, f) != NULL;
+        fclose(f);
+    }
+
+    return ret;
+}
+
+/*
+ * Use /sys/bus/usb/devices/ directory to determine host's USB
+ * devices.
+ *
+ * This code is based on Robert Schiele's original patches posted to
+ * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950
+ */
+static int usb_host_scan(void *opaque, USBScanFunc *func)
+{
+    DIR *dir = NULL;
+    char line[1024];
+    int bus_num, addr, speed, class_id, product_id, vendor_id;
+    int ret = 0;
+    char port[MAX_PORTLEN];
+    char product_name[512];
+    struct dirent *de;
+
+    dir = opendir("/sys/bus/usb/devices");
+    if (!dir) {
+        perror("husb: opendir /sys/bus/usb/devices");
+        fprintf(stderr, "husb: please make sure sysfs is mounted at /sys\n");
+        goto the_end;
+    }
+
+    while ((de = readdir(dir))) {
+        if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) {
+            if (sscanf(de->d_name, "%d-%7[0-9.]", &bus_num, port) < 2) {
+                continue;
+            }
+
+            if (!usb_host_read_file(line, sizeof(line), "devnum", de->d_name)) {
+                goto the_end;
+            }
+            if (sscanf(line, "%d", &addr) != 1) {
+                goto the_end;
+            }
+            if (!usb_host_read_file(line, sizeof(line), "bDeviceClass",
+                                    de->d_name)) {
+                goto the_end;
+            }
+            if (sscanf(line, "%x", &class_id) != 1) {
+                goto the_end;
+            }
+
+            if (!usb_host_read_file(line, sizeof(line), "idVendor",
+                                    de->d_name)) {
+                goto the_end;
+            }
+            if (sscanf(line, "%x", &vendor_id) != 1) {
+                goto the_end;
+            }
+            if (!usb_host_read_file(line, sizeof(line), "idProduct",
+                                    de->d_name)) {
+                goto the_end;
+            }
+            if (sscanf(line, "%x", &product_id) != 1) {
+                goto the_end;
+            }
+            if (!usb_host_read_file(line, sizeof(line), "product",
+                                    de->d_name)) {
+                *product_name = 0;
+            } else {
+                if (strlen(line) > 0) {
+                    line[strlen(line) - 1] = '\0';
+                }
+                pstrcpy(product_name, sizeof(product_name), line);
+            }
+
+            if (!usb_host_read_file(line, sizeof(line), "speed", de->d_name)) {
+                goto the_end;
+            }
+            if (!strcmp(line, "5000\n")) {
+                speed = USB_SPEED_SUPER;
+            } else if (!strcmp(line, "480\n")) {
+                speed = USB_SPEED_HIGH;
+            } else if (!strcmp(line, "1.5\n")) {
+                speed = USB_SPEED_LOW;
+            } else {
+                speed = USB_SPEED_FULL;
+            }
+
+            ret = func(opaque, bus_num, addr, port, class_id, vendor_id,
+                       product_id, product_name, speed);
+            if (ret) {
+                goto the_end;
+            }
+        }
+    }
+ the_end:
+    if (dir) {
+        closedir(dir);
+    }
+    return ret;
+}
+
+static QEMUTimer *usb_auto_timer;
+
+static int usb_host_auto_scan(void *opaque, int bus_num,
+                              int addr, const char *port,
+                              int class_id, int vendor_id, int product_id,
+                              const char *product_name, int speed)
+{
+    struct USBAutoFilter *f;
+    struct USBHostDevice *s;
+
+    /* Ignore hubs */
+    if (class_id == 9)
+        return 0;
+
+    QTAILQ_FOREACH(s, &hostdevs, next) {
+        f = &s->match;
+
+        if (f->bus_num > 0 && f->bus_num != bus_num) {
+            continue;
+        }
+        if (f->addr > 0 && f->addr != addr) {
+            continue;
+        }
+        if (f->port != NULL && (port == NULL || strcmp(f->port, port) != 0)) {
+            continue;
+        }
+
+        if (f->vendor_id > 0 && f->vendor_id != vendor_id) {
+            continue;
+        }
+
+        if (f->product_id > 0 && f->product_id != product_id) {
+            continue;
+        }
+        /* We got a match */
+        s->seen++;
+        if (s->errcount >= 3) {
+            return 0;
+        }
+
+        /* Already attached ? */
+        if (s->fd != -1) {
+            return 0;
+        }
+        DPRINTF("husb: auto open: bus_num %d addr %d\n", bus_num, addr);
+
+        if (usb_host_open(s, bus_num, addr, port, product_name, speed) < 0) {
+            s->errcount++;
+        }
+        break;
+    }
+
+    return 0;
+}
+
+static void usb_host_auto_check(void *unused)
+{
+    struct USBHostDevice *s;
+    int unconnected = 0;
+
+    usb_host_scan(NULL, usb_host_auto_scan);
+
+    QTAILQ_FOREACH(s, &hostdevs, next) {
+        if (s->fd == -1) {
+            unconnected++;
+        }
+        if (s->seen == 0) {
+            s->errcount = 0;
+        }
+        s->seen = 0;
+    }
+
+    if (unconnected == 0) {
+        /* nothing to watch */
+        if (usb_auto_timer) {
+            qemu_del_timer(usb_auto_timer);
+            trace_usb_host_auto_scan_disabled();
+        }
+        return;
+    }
+
+    if (!usb_auto_timer) {
+        usb_auto_timer = qemu_new_timer_ms(rt_clock, usb_host_auto_check, NULL);
+        if (!usb_auto_timer) {
+            return;
+        }
+        trace_usb_host_auto_scan_enabled();
+    }
+    qemu_mod_timer(usb_auto_timer, qemu_get_clock_ms(rt_clock) + 2000);
+}
+
+/*
+ * Autoconnect filter
+ * Format:
+ *    auto:bus:dev[:vid:pid]
+ *    auto:bus.dev[:vid:pid]
+ *
+ *    bus  - bus number    (dec, * means any)
+ *    dev  - device number (dec, * means any)
+ *    vid  - vendor id     (hex, * means any)
+ *    pid  - product id    (hex, * means any)
+ *
+ *    See 'lsusb' output.
+ */
+static int parse_filter(const char *spec, struct USBAutoFilter *f)
+{
+    enum { BUS, DEV, VID, PID, DONE };
+    const char *p = spec;
+    int i;
+
+    f->bus_num    = 0;
+    f->addr       = 0;
+    f->vendor_id  = 0;
+    f->product_id = 0;
+
+    for (i = BUS; i < DONE; i++) {
+        p = strpbrk(p, ":.");
+        if (!p) {
+            break;
+        }
+        p++;
+
+        if (*p == '*') {
+            continue;
+        }
+        switch(i) {
+        case BUS: f->bus_num = strtol(p, NULL, 10);    break;
+        case DEV: f->addr    = strtol(p, NULL, 10);    break;
+        case VID: f->vendor_id  = strtol(p, NULL, 16); break;
+        case PID: f->product_id = strtol(p, NULL, 16); break;
+        }
+    }
+
+    if (i < DEV) {
+        fprintf(stderr, "husb: invalid auto filter spec %s\n", spec);
+        return -1;
+    }
+
+    return 0;
+}
+
+/**********************/
+/* USB host device info */
+
+struct usb_class_info {
+    int class;
+    const char *class_name;
+};
+
+static const struct usb_class_info usb_class_info[] = {
+    { USB_CLASS_AUDIO, "Audio"},
+    { USB_CLASS_COMM, "Communication"},
+    { USB_CLASS_HID, "HID"},
+    { USB_CLASS_HUB, "Hub" },
+    { USB_CLASS_PHYSICAL, "Physical" },
+    { USB_CLASS_PRINTER, "Printer" },
+    { USB_CLASS_MASS_STORAGE, "Storage" },
+    { USB_CLASS_CDC_DATA, "Data" },
+    { USB_CLASS_APP_SPEC, "Application Specific" },
+    { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
+    { USB_CLASS_STILL_IMAGE, "Still Image" },
+    { USB_CLASS_CSCID, "Smart Card" },
+    { USB_CLASS_CONTENT_SEC, "Content Security" },
+    { -1, NULL }
+};
+
+static const char *usb_class_str(uint8_t class)
+{
+    const struct usb_class_info *p;
+    for(p = usb_class_info; p->class != -1; p++) {
+        if (p->class == class) {
+            break;
+        }
+    }
+    return p->class_name;
+}
+
+static void usb_info_device(Monitor *mon, int bus_num,
+                            int addr, const char *port,
+                            int class_id, int vendor_id, int product_id,
+                            const char *product_name,
+                            int speed)
+{
+    const char *class_str, *speed_str;
+
+    switch(speed) {
+    case USB_SPEED_LOW:
+        speed_str = "1.5";
+        break;
+    case USB_SPEED_FULL:
+        speed_str = "12";
+        break;
+    case USB_SPEED_HIGH:
+        speed_str = "480";
+        break;
+    case USB_SPEED_SUPER:
+        speed_str = "5000";
+        break;
+    default:
+        speed_str = "?";
+        break;
+    }
+
+    monitor_printf(mon, "  Bus %d, Addr %d, Port %s, Speed %s Mb/s\n",
+                   bus_num, addr, port, speed_str);
+    class_str = usb_class_str(class_id);
+    if (class_str) {
+        monitor_printf(mon, "    %s:", class_str);
+    } else {
+        monitor_printf(mon, "    Class %02x:", class_id);
+    }
+    monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
+    if (product_name[0] != '\0') {
+        monitor_printf(mon, ", %s", product_name);
+    }
+    monitor_printf(mon, "\n");
+}
+
+static int usb_host_info_device(void *opaque, int bus_num, int addr,
+                                const char *path, int class_id,
+                                int vendor_id, int product_id,
+                                const char *product_name,
+                                int speed)
+{
+    Monitor *mon = opaque;
+
+    usb_info_device(mon, bus_num, addr, path, class_id, vendor_id, product_id,
+                    product_name, speed);
+    return 0;
+}
+
+static void dec2str(int val, char *str, size_t size)
+{
+    if (val == 0) {
+        snprintf(str, size, "*");
+    } else {
+        snprintf(str, size, "%d", val);
+    }
+}
+
+static void hex2str(int val, char *str, size_t size)
+{
+    if (val == 0) {
+        snprintf(str, size, "*");
+    } else {
+        snprintf(str, size, "%04x", val);
+    }
+}
+
+void usb_host_info(Monitor *mon)
+{
+    struct USBAutoFilter *f;
+    struct USBHostDevice *s;
+
+    usb_host_scan(mon, usb_host_info_device);
+
+    if (QTAILQ_EMPTY(&hostdevs)) {
+        return;
+    }
+
+    monitor_printf(mon, "  Auto filters:\n");
+    QTAILQ_FOREACH(s, &hostdevs, next) {
+        char bus[10], addr[10], vid[10], pid[10];
+        f = &s->match;
+        dec2str(f->bus_num, bus, sizeof(bus));
+        dec2str(f->addr, addr, sizeof(addr));
+        hex2str(f->vendor_id, vid, sizeof(vid));
+        hex2str(f->product_id, pid, sizeof(pid));
+        monitor_printf(mon, "    Bus %s, Addr %s, Port %s, ID %s:%s\n",
+                       bus, addr, f->port ? f->port : "*", vid, pid);
+    }
+}
diff --git a/hw/usb/host-stub.c b/hw/usb/host-stub.c
new file mode 100644
index 0000000..b4e10c1
--- /dev/null
+++ b/hw/usb/host-stub.c
@@ -0,0 +1,52 @@
+/*
+ * Stub host USB redirector
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ *      Support for host device auto connect & disconnect
+ *      Major rewrite to support fully async operation
+ *
+ * Copyright 2008 TJ <linux@tjworld.net>
+ *      Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
+ *      to the legacy /proc/bus/usb USB device discovery and handling
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "console.h"
+#include "hw/usb.h"
+#include "monitor.h"
+
+void usb_host_info(Monitor *mon)
+{
+    monitor_printf(mon, "USB host devices not supported\n");
+}
+
+/* XXX: modify configure to compile the right host driver */
+USBDevice *usb_host_device_open(USBBus *bus, const char *devname)
+{
+    return NULL;
+}
+
+int usb_host_device_close(const char *devname)
+{
+    return 0;
+}
diff --git a/hw/usb-libhw.c b/hw/usb/libhw.c
index 162b42b..2462351 100644
--- a/hw/usb-libhw.c
+++ b/hw/usb/libhw.c
@@ -21,7 +21,7 @@
  */
 #include "qemu-common.h"
 #include "cpu-common.h"
-#include "usb.h"
+#include "hw/usb.h"
 #include "dma.h"
 
 int usb_packet_map(USBPacket *p, QEMUSGList *sgl)
diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c
new file mode 100644
index 0000000..8e9f175
--- /dev/null
+++ b/hw/usb/redirect.c
@@ -0,0 +1,1485 @@
+/*
+ * USB redirector usb-guest
+ *
+ * Copyright (c) 2011 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "monitor.h"
+#include "sysemu.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+#include <usbredirparser.h>
+#include <usbredirfilter.h>
+
+#include "hw/usb.h"
+
+#define MAX_ENDPOINTS 32
+#define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f))
+#define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f))
+
+typedef struct AsyncURB AsyncURB;
+typedef struct USBRedirDevice USBRedirDevice;
+
+/* Struct to hold buffered packets (iso or int input packets) */
+struct buf_packet {
+    uint8_t *data;
+    int len;
+    int status;
+    QTAILQ_ENTRY(buf_packet)next;
+};
+
+struct endp_data {
+    uint8_t type;
+    uint8_t interval;
+    uint8_t interface; /* bInterfaceNumber this ep belongs to */
+    uint8_t iso_started;
+    uint8_t iso_error; /* For reporting iso errors to the HC */
+    uint8_t interrupt_started;
+    uint8_t interrupt_error;
+    uint8_t bufpq_prefilled;
+    uint8_t bufpq_dropping_packets;
+    QTAILQ_HEAD(, buf_packet) bufpq;
+    int bufpq_size;
+    int bufpq_target_size;
+};
+
+struct USBRedirDevice {
+    USBDevice dev;
+    /* Properties */
+    CharDriverState *cs;
+    uint8_t debug;
+    char *filter_str;
+    /* Data passed from chardev the fd_read cb to the usbredirparser read cb */
+    const uint8_t *read_buf;
+    int read_buf_size;
+    /* For async handling of open/close */
+    QEMUBH *open_close_bh;
+    /* To delay the usb attach in case of quick chardev close + open */
+    QEMUTimer *attach_timer;
+    int64_t next_attach_time;
+    struct usbredirparser *parser;
+    struct endp_data endpoint[MAX_ENDPOINTS];
+    uint32_t packet_id;
+    QTAILQ_HEAD(, AsyncURB) asyncq;
+    /* Data for device filtering */
+    struct usb_redir_device_connect_header device_info;
+    struct usb_redir_interface_info_header interface_info;
+    struct usbredirfilter_rule *filter_rules;
+    int filter_rules_count;
+};
+
+struct AsyncURB {
+    USBRedirDevice *dev;
+    USBPacket *packet;
+    uint32_t packet_id;
+    int get;
+    union {
+        struct usb_redir_control_packet_header control_packet;
+        struct usb_redir_bulk_packet_header bulk_packet;
+        struct usb_redir_interrupt_packet_header interrupt_packet;
+    };
+    QTAILQ_ENTRY(AsyncURB)next;
+};
+
+static void usbredir_hello(void *priv, struct usb_redir_hello_header *h);
+static void usbredir_device_connect(void *priv,
+    struct usb_redir_device_connect_header *device_connect);
+static void usbredir_device_disconnect(void *priv);
+static void usbredir_interface_info(void *priv,
+    struct usb_redir_interface_info_header *interface_info);
+static void usbredir_ep_info(void *priv,
+    struct usb_redir_ep_info_header *ep_info);
+static void usbredir_configuration_status(void *priv, uint32_t id,
+    struct usb_redir_configuration_status_header *configuration_status);
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+    struct usb_redir_alt_setting_status_header *alt_setting_status);
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+    struct usb_redir_iso_stream_status_header *iso_stream_status);
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+    struct usb_redir_interrupt_receiving_status_header
+    *interrupt_receiving_status);
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+    struct usb_redir_bulk_streams_status_header *bulk_streams_status);
+static void usbredir_control_packet(void *priv, uint32_t id,
+    struct usb_redir_control_packet_header *control_packet,
+    uint8_t *data, int data_len);
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+    struct usb_redir_bulk_packet_header *bulk_packet,
+    uint8_t *data, int data_len);
+static void usbredir_iso_packet(void *priv, uint32_t id,
+    struct usb_redir_iso_packet_header *iso_packet,
+    uint8_t *data, int data_len);
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+    struct usb_redir_interrupt_packet_header *interrupt_header,
+    uint8_t *data, int data_len);
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+                                       int status, int actual_len);
+
+#define VERSION "qemu usb-redir guest " QEMU_VERSION
+
+/*
+ * Logging stuff
+ */
+
+#define ERROR(...) \
+    do { \
+        if (dev->debug >= usbredirparser_error) { \
+            error_report("usb-redir error: " __VA_ARGS__); \
+        } \
+    } while (0)
+#define WARNING(...) \
+    do { \
+        if (dev->debug >= usbredirparser_warning) { \
+            error_report("usb-redir warning: " __VA_ARGS__); \
+        } \
+    } while (0)
+#define INFO(...) \
+    do { \
+        if (dev->debug >= usbredirparser_info) { \
+            error_report("usb-redir: " __VA_ARGS__); \
+        } \
+    } while (0)
+#define DPRINTF(...) \
+    do { \
+        if (dev->debug >= usbredirparser_debug) { \
+            error_report("usb-redir: " __VA_ARGS__); \
+        } \
+    } while (0)
+#define DPRINTF2(...) \
+    do { \
+        if (dev->debug >= usbredirparser_debug_data) { \
+            error_report("usb-redir: " __VA_ARGS__); \
+        } \
+    } while (0)
+
+static void usbredir_log(void *priv, int level, const char *msg)
+{
+    USBRedirDevice *dev = priv;
+
+    if (dev->debug < level) {
+        return;
+    }
+
+    error_report("%s", msg);
+}
+
+static void usbredir_log_data(USBRedirDevice *dev, const char *desc,
+    const uint8_t *data, int len)
+{
+    int i, j, n;
+
+    if (dev->debug < usbredirparser_debug_data) {
+        return;
+    }
+
+    for (i = 0; i < len; i += j) {
+        char buf[128];
+
+        n = sprintf(buf, "%s", desc);
+        for (j = 0; j < 8 && i + j < len; j++) {
+            n += sprintf(buf + n, " %02X", data[i + j]);
+        }
+        error_report("%s", buf);
+    }
+}
+
+/*
+ * usbredirparser io functions
+ */
+
+static int usbredir_read(void *priv, uint8_t *data, int count)
+{
+    USBRedirDevice *dev = priv;
+
+    if (dev->read_buf_size < count) {
+        count = dev->read_buf_size;
+    }
+
+    memcpy(data, dev->read_buf, count);
+
+    dev->read_buf_size -= count;
+    if (dev->read_buf_size) {
+        dev->read_buf += count;
+    } else {
+        dev->read_buf = NULL;
+    }
+
+    return count;
+}
+
+static int usbredir_write(void *priv, uint8_t *data, int count)
+{
+    USBRedirDevice *dev = priv;
+
+    if (!dev->cs->opened) {
+        return 0;
+    }
+
+    return qemu_chr_fe_write(dev->cs, data, count);
+}
+
+/*
+ * Async and buffered packets helpers
+ */
+
+static AsyncURB *async_alloc(USBRedirDevice *dev, USBPacket *p)
+{
+    AsyncURB *aurb = (AsyncURB *) g_malloc0(sizeof(AsyncURB));
+    aurb->dev = dev;
+    aurb->packet = p;
+    aurb->packet_id = dev->packet_id;
+    QTAILQ_INSERT_TAIL(&dev->asyncq, aurb, next);
+    dev->packet_id++;
+
+    return aurb;
+}
+
+static void async_free(USBRedirDevice *dev, AsyncURB *aurb)
+{
+    QTAILQ_REMOVE(&dev->asyncq, aurb, next);
+    g_free(aurb);
+}
+
+static AsyncURB *async_find(USBRedirDevice *dev, uint32_t packet_id)
+{
+    AsyncURB *aurb;
+
+    QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+        if (aurb->packet_id == packet_id) {
+            return aurb;
+        }
+    }
+    ERROR("could not find async urb for packet_id %u\n", packet_id);
+    return NULL;
+}
+
+static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+    AsyncURB *aurb;
+
+    QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+        if (p != aurb->packet) {
+            continue;
+        }
+
+        DPRINTF("async cancel id %u\n", aurb->packet_id);
+        usbredirparser_send_cancel_data_packet(dev->parser, aurb->packet_id);
+        usbredirparser_do_write(dev->parser);
+
+        /* Mark it as dead */
+        aurb->packet = NULL;
+        break;
+    }
+}
+
+static void bufp_alloc(USBRedirDevice *dev,
+    uint8_t *data, int len, int status, uint8_t ep)
+{
+    struct buf_packet *bufp;
+
+    if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets &&
+        dev->endpoint[EP2I(ep)].bufpq_size >
+            2 * dev->endpoint[EP2I(ep)].bufpq_target_size) {
+        DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1;
+    }
+    /* Since we're interupting the stream anyways, drop enough packets to get
+       back to our target buffer size */
+    if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) {
+        if (dev->endpoint[EP2I(ep)].bufpq_size >
+                dev->endpoint[EP2I(ep)].bufpq_target_size) {
+            free(data);
+            return;
+        }
+        dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+    }
+
+    bufp = g_malloc(sizeof(struct buf_packet));
+    bufp->data   = data;
+    bufp->len    = len;
+    bufp->status = status;
+    QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+    dev->endpoint[EP2I(ep)].bufpq_size++;
+}
+
+static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp,
+    uint8_t ep)
+{
+    QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+    dev->endpoint[EP2I(ep)].bufpq_size--;
+    free(bufp->data);
+    g_free(bufp);
+}
+
+static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep)
+{
+    struct buf_packet *buf, *buf_next;
+
+    QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) {
+        bufp_free(dev, buf, ep);
+    }
+}
+
+/*
+ * USBDevice callbacks
+ */
+
+static void usbredir_handle_reset(USBDevice *udev)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+    DPRINTF("reset device\n");
+    usbredirparser_send_reset(dev->parser);
+    usbredirparser_do_write(dev->parser);
+}
+
+static int usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p,
+                                     uint8_t ep)
+{
+    int status, len;
+    if (!dev->endpoint[EP2I(ep)].iso_started &&
+            !dev->endpoint[EP2I(ep)].iso_error) {
+        struct usb_redir_start_iso_stream_header start_iso = {
+            .endpoint = ep,
+        };
+        int pkts_per_sec;
+
+        if (dev->dev.speed == USB_SPEED_HIGH) {
+            pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval;
+        } else {
+            pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval;
+        }
+        /* Testing has shown that we need circa 60 ms buffer */
+        dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000;
+
+        /* Aim for approx 100 interrupts / second on the client to
+           balance latency and interrupt load */
+        start_iso.pkts_per_urb = pkts_per_sec / 100;
+        if (start_iso.pkts_per_urb < 1) {
+            start_iso.pkts_per_urb = 1;
+        } else if (start_iso.pkts_per_urb > 32) {
+            start_iso.pkts_per_urb = 32;
+        }
+
+        start_iso.no_urbs = (dev->endpoint[EP2I(ep)].bufpq_target_size +
+                             start_iso.pkts_per_urb - 1) /
+                            start_iso.pkts_per_urb;
+        /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest
+           as overflow buffer. Also see the usbredir protocol documentation */
+        if (!(ep & USB_DIR_IN)) {
+            start_iso.no_urbs *= 2;
+        }
+        if (start_iso.no_urbs > 16) {
+            start_iso.no_urbs = 16;
+        }
+
+        /* No id, we look at the ep when receiving a status back */
+        usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso);
+        usbredirparser_do_write(dev->parser);
+        DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n",
+                pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep);
+        dev->endpoint[EP2I(ep)].iso_started = 1;
+        dev->endpoint[EP2I(ep)].bufpq_prefilled = 0;
+        dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+    }
+
+    if (ep & USB_DIR_IN) {
+        struct buf_packet *isop;
+
+        if (dev->endpoint[EP2I(ep)].iso_started &&
+                !dev->endpoint[EP2I(ep)].bufpq_prefilled) {
+            if (dev->endpoint[EP2I(ep)].bufpq_size <
+                    dev->endpoint[EP2I(ep)].bufpq_target_size) {
+                return usbredir_handle_status(dev, 0, 0);
+            }
+            dev->endpoint[EP2I(ep)].bufpq_prefilled = 1;
+        }
+
+        isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+        if (isop == NULL) {
+            DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n",
+                    ep, dev->endpoint[EP2I(ep)].iso_error);
+            /* Re-fill the buffer */
+            dev->endpoint[EP2I(ep)].bufpq_prefilled = 0;
+            /* Check iso_error for stream errors, otherwise its an underrun */
+            status = dev->endpoint[EP2I(ep)].iso_error;
+            dev->endpoint[EP2I(ep)].iso_error = 0;
+            return status ? USB_RET_IOERROR : 0;
+        }
+        DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep,
+                 isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size);
+
+        status = isop->status;
+        if (status != usb_redir_success) {
+            bufp_free(dev, isop, ep);
+            return USB_RET_IOERROR;
+        }
+
+        len = isop->len;
+        if (len > p->iov.size) {
+            ERROR("received iso data is larger then packet ep %02X (%d > %d)\n",
+                  ep, len, (int)p->iov.size);
+            bufp_free(dev, isop, ep);
+            return USB_RET_BABBLE;
+        }
+        usb_packet_copy(p, isop->data, len);
+        bufp_free(dev, isop, ep);
+        return len;
+    } else {
+        /* If the stream was not started because of a pending error don't
+           send the packet to the usb-host */
+        if (dev->endpoint[EP2I(ep)].iso_started) {
+            struct usb_redir_iso_packet_header iso_packet = {
+                .endpoint = ep,
+                .length = p->iov.size
+            };
+            uint8_t buf[p->iov.size];
+            /* No id, we look at the ep when receiving a status back */
+            usb_packet_copy(p, buf, p->iov.size);
+            usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet,
+                                           buf, p->iov.size);
+            usbredirparser_do_write(dev->parser);
+        }
+        status = dev->endpoint[EP2I(ep)].iso_error;
+        dev->endpoint[EP2I(ep)].iso_error = 0;
+        DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status,
+                 p->iov.size);
+        return usbredir_handle_status(dev, status, p->iov.size);
+    }
+}
+
+static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep)
+{
+    struct usb_redir_stop_iso_stream_header stop_iso_stream = {
+        .endpoint = ep
+    };
+    if (dev->endpoint[EP2I(ep)].iso_started) {
+        usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream);
+        DPRINTF("iso stream stopped ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].iso_started = 0;
+    }
+    dev->endpoint[EP2I(ep)].iso_error = 0;
+    usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p,
+                                      uint8_t ep)
+{
+    AsyncURB *aurb = async_alloc(dev, p);
+    struct usb_redir_bulk_packet_header bulk_packet;
+
+    DPRINTF("bulk-out ep %02X len %zd id %u\n", ep,
+            p->iov.size, aurb->packet_id);
+
+    bulk_packet.endpoint  = ep;
+    bulk_packet.length    = p->iov.size;
+    bulk_packet.stream_id = 0;
+    aurb->bulk_packet = bulk_packet;
+
+    if (ep & USB_DIR_IN) {
+        usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+                                        &bulk_packet, NULL, 0);
+    } else {
+        uint8_t buf[p->iov.size];
+        usb_packet_copy(p, buf, p->iov.size);
+        usbredir_log_data(dev, "bulk data out:", buf, p->iov.size);
+        usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+                                        &bulk_packet, buf, p->iov.size);
+    }
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_interrupt_data(USBRedirDevice *dev,
+                                           USBPacket *p, uint8_t ep)
+{
+    if (ep & USB_DIR_IN) {
+        /* Input interrupt endpoint, buffered packet input */
+        struct buf_packet *intp;
+        int status, len;
+
+        if (!dev->endpoint[EP2I(ep)].interrupt_started &&
+                !dev->endpoint[EP2I(ep)].interrupt_error) {
+            struct usb_redir_start_interrupt_receiving_header start_int = {
+                .endpoint = ep,
+            };
+            /* No id, we look at the ep when receiving a status back */
+            usbredirparser_send_start_interrupt_receiving(dev->parser, 0,
+                                                          &start_int);
+            usbredirparser_do_write(dev->parser);
+            DPRINTF("interrupt recv started ep %02X\n", ep);
+            dev->endpoint[EP2I(ep)].interrupt_started = 1;
+            /* We don't really want to drop interrupt packets ever, but
+               having some upper limit to how much we buffer is good. */
+            dev->endpoint[EP2I(ep)].bufpq_target_size = 1000;
+            dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+        }
+
+        intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+        if (intp == NULL) {
+            DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep);
+            /* Check interrupt_error for stream errors */
+            status = dev->endpoint[EP2I(ep)].interrupt_error;
+            dev->endpoint[EP2I(ep)].interrupt_error = 0;
+            if (status) {
+                return usbredir_handle_status(dev, status, 0);
+            }
+            return USB_RET_NAK;
+        }
+        DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep,
+                intp->status, intp->len);
+
+        status = intp->status;
+        if (status != usb_redir_success) {
+            bufp_free(dev, intp, ep);
+            return usbredir_handle_status(dev, status, 0);
+        }
+
+        len = intp->len;
+        if (len > p->iov.size) {
+            ERROR("received int data is larger then packet ep %02X\n", ep);
+            bufp_free(dev, intp, ep);
+            return USB_RET_BABBLE;
+        }
+        usb_packet_copy(p, intp->data, len);
+        bufp_free(dev, intp, ep);
+        return len;
+    } else {
+        /* Output interrupt endpoint, normal async operation */
+        AsyncURB *aurb = async_alloc(dev, p);
+        struct usb_redir_interrupt_packet_header interrupt_packet;
+        uint8_t buf[p->iov.size];
+
+        DPRINTF("interrupt-out ep %02X len %zd id %u\n", ep, p->iov.size,
+                aurb->packet_id);
+
+        interrupt_packet.endpoint  = ep;
+        interrupt_packet.length    = p->iov.size;
+        aurb->interrupt_packet     = interrupt_packet;
+
+        usb_packet_copy(p, buf, p->iov.size);
+        usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size);
+        usbredirparser_send_interrupt_packet(dev->parser, aurb->packet_id,
+                                        &interrupt_packet, buf, p->iov.size);
+        usbredirparser_do_write(dev->parser);
+        return USB_RET_ASYNC;
+    }
+}
+
+static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev,
+    uint8_t ep)
+{
+    struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = {
+        .endpoint = ep
+    };
+    if (dev->endpoint[EP2I(ep)].interrupt_started) {
+        usbredirparser_send_stop_interrupt_receiving(dev->parser, 0,
+                                                     &stop_interrupt_recv);
+        DPRINTF("interrupt recv stopped ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].interrupt_started = 0;
+    }
+    dev->endpoint[EP2I(ep)].interrupt_error = 0;
+    usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_data(USBDevice *udev, USBPacket *p)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+    uint8_t ep;
+
+    ep = p->ep->nr;
+    if (p->pid == USB_TOKEN_IN) {
+        ep |= USB_DIR_IN;
+    }
+
+    switch (dev->endpoint[EP2I(ep)].type) {
+    case USB_ENDPOINT_XFER_CONTROL:
+        ERROR("handle_data called for control transfer on ep %02X\n", ep);
+        return USB_RET_NAK;
+    case USB_ENDPOINT_XFER_ISOC:
+        return usbredir_handle_iso_data(dev, p, ep);
+    case USB_ENDPOINT_XFER_BULK:
+        return usbredir_handle_bulk_data(dev, p, ep);
+    case USB_ENDPOINT_XFER_INT:
+        return usbredir_handle_interrupt_data(dev, p, ep);
+    default:
+        ERROR("handle_data ep %02X has unknown type %d\n", ep,
+              dev->endpoint[EP2I(ep)].type);
+        return USB_RET_NAK;
+    }
+}
+
+static int usbredir_set_config(USBRedirDevice *dev, USBPacket *p,
+                                int config)
+{
+    struct usb_redir_set_configuration_header set_config;
+    AsyncURB *aurb = async_alloc(dev, p);
+    int i;
+
+    DPRINTF("set config %d id %u\n", config, aurb->packet_id);
+
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        switch (dev->endpoint[i].type) {
+        case USB_ENDPOINT_XFER_ISOC:
+            usbredir_stop_iso_stream(dev, I2EP(i));
+            break;
+        case USB_ENDPOINT_XFER_INT:
+            if (i & 0x10) {
+                usbredir_stop_interrupt_receiving(dev, I2EP(i));
+            }
+            break;
+        }
+        usbredir_free_bufpq(dev, I2EP(i));
+    }
+
+    set_config.configuration = config;
+    usbredirparser_send_set_configuration(dev->parser, aurb->packet_id,
+                                          &set_config);
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+static int usbredir_get_config(USBRedirDevice *dev, USBPacket *p)
+{
+    AsyncURB *aurb = async_alloc(dev, p);
+
+    DPRINTF("get config id %u\n", aurb->packet_id);
+
+    aurb->get = 1;
+    usbredirparser_send_get_configuration(dev->parser, aurb->packet_id);
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+static int usbredir_set_interface(USBRedirDevice *dev, USBPacket *p,
+                                   int interface, int alt)
+{
+    struct usb_redir_set_alt_setting_header set_alt;
+    AsyncURB *aurb = async_alloc(dev, p);
+    int i;
+
+    DPRINTF("set interface %d alt %d id %u\n", interface, alt,
+            aurb->packet_id);
+
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        if (dev->endpoint[i].interface == interface) {
+            switch (dev->endpoint[i].type) {
+            case USB_ENDPOINT_XFER_ISOC:
+                usbredir_stop_iso_stream(dev, I2EP(i));
+                break;
+            case USB_ENDPOINT_XFER_INT:
+                if (i & 0x10) {
+                    usbredir_stop_interrupt_receiving(dev, I2EP(i));
+                }
+                break;
+            }
+            usbredir_free_bufpq(dev, I2EP(i));
+        }
+    }
+
+    set_alt.interface = interface;
+    set_alt.alt = alt;
+    usbredirparser_send_set_alt_setting(dev->parser, aurb->packet_id,
+                                        &set_alt);
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+static int usbredir_get_interface(USBRedirDevice *dev, USBPacket *p,
+                                   int interface)
+{
+    struct usb_redir_get_alt_setting_header get_alt;
+    AsyncURB *aurb = async_alloc(dev, p);
+
+    DPRINTF("get interface %d id %u\n", interface, aurb->packet_id);
+
+    get_alt.interface = interface;
+    aurb->get = 1;
+    usbredirparser_send_get_alt_setting(dev->parser, aurb->packet_id,
+                                        &get_alt);
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_control(USBDevice *udev, USBPacket *p,
+        int request, int value, int index, int length, uint8_t *data)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+    struct usb_redir_control_packet_header control_packet;
+    AsyncURB *aurb;
+
+    /* Special cases for certain standard device requests */
+    switch (request) {
+    case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+        DPRINTF("set address %d\n", value);
+        dev->dev.addr = value;
+        return 0;
+    case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+        return usbredir_set_config(dev, p, value & 0xff);
+    case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+        return usbredir_get_config(dev, p);
+    case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+        return usbredir_set_interface(dev, p, index, value);
+    case InterfaceRequest | USB_REQ_GET_INTERFACE:
+        return usbredir_get_interface(dev, p, index);
+    }
+
+    /* "Normal" ctrl requests */
+    aurb = async_alloc(dev, p);
+
+    /* Note request is (bRequestType << 8) | bRequest */
+    DPRINTF("ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %u\n",
+            request >> 8, request & 0xff, value, index, length,
+            aurb->packet_id);
+
+    control_packet.request     = request & 0xFF;
+    control_packet.requesttype = request >> 8;
+    control_packet.endpoint    = control_packet.requesttype & USB_DIR_IN;
+    control_packet.value       = value;
+    control_packet.index       = index;
+    control_packet.length      = length;
+    aurb->control_packet       = control_packet;
+
+    if (control_packet.requesttype & USB_DIR_IN) {
+        usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+                                           &control_packet, NULL, 0);
+    } else {
+        usbredir_log_data(dev, "ctrl data out:", data, length);
+        usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+                                           &control_packet, data, length);
+    }
+    usbredirparser_do_write(dev->parser);
+    return USB_RET_ASYNC;
+}
+
+/*
+ * Close events can be triggered by usbredirparser_do_write which gets called
+ * from within the USBDevice data / control packet callbacks and doing a
+ * usb_detach from within these callbacks is not a good idea.
+ *
+ * So we use a bh handler to take care of close events. We also handle
+ * open events from this callback to make sure that a close directly followed
+ * by an open gets handled in the right order.
+ */
+static void usbredir_open_close_bh(void *opaque)
+{
+    USBRedirDevice *dev = opaque;
+    uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, };
+
+    usbredir_device_disconnect(dev);
+
+    if (dev->parser) {
+        usbredirparser_destroy(dev->parser);
+        dev->parser = NULL;
+    }
+
+    if (dev->cs->opened) {
+        dev->parser = qemu_oom_check(usbredirparser_create());
+        dev->parser->priv = dev;
+        dev->parser->log_func = usbredir_log;
+        dev->parser->read_func = usbredir_read;
+        dev->parser->write_func = usbredir_write;
+        dev->parser->hello_func = usbredir_hello;
+        dev->parser->device_connect_func = usbredir_device_connect;
+        dev->parser->device_disconnect_func = usbredir_device_disconnect;
+        dev->parser->interface_info_func = usbredir_interface_info;
+        dev->parser->ep_info_func = usbredir_ep_info;
+        dev->parser->configuration_status_func = usbredir_configuration_status;
+        dev->parser->alt_setting_status_func = usbredir_alt_setting_status;
+        dev->parser->iso_stream_status_func = usbredir_iso_stream_status;
+        dev->parser->interrupt_receiving_status_func =
+            usbredir_interrupt_receiving_status;
+        dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status;
+        dev->parser->control_packet_func = usbredir_control_packet;
+        dev->parser->bulk_packet_func = usbredir_bulk_packet;
+        dev->parser->iso_packet_func = usbredir_iso_packet;
+        dev->parser->interrupt_packet_func = usbredir_interrupt_packet;
+        dev->read_buf = NULL;
+        dev->read_buf_size = 0;
+
+        usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version);
+        usbredirparser_caps_set_cap(caps, usb_redir_cap_filter);
+        usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, 0);
+        usbredirparser_do_write(dev->parser);
+    }
+}
+
+static void usbredir_do_attach(void *opaque)
+{
+    USBRedirDevice *dev = opaque;
+
+    usb_device_attach(&dev->dev);
+}
+
+/*
+ * chardev callbacks
+ */
+
+static int usbredir_chardev_can_read(void *opaque)
+{
+    USBRedirDevice *dev = opaque;
+
+    if (dev->parser) {
+        /* usbredir_parser_do_read will consume *all* data we give it */
+        return 1024 * 1024;
+    } else {
+        /* usbredir_open_close_bh hasn't handled the open event yet */
+        return 0;
+    }
+}
+
+static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size)
+{
+    USBRedirDevice *dev = opaque;
+
+    /* No recursion allowed! */
+    assert(dev->read_buf == NULL);
+
+    dev->read_buf = buf;
+    dev->read_buf_size = size;
+
+    usbredirparser_do_read(dev->parser);
+    /* Send any acks, etc. which may be queued now */
+    usbredirparser_do_write(dev->parser);
+}
+
+static void usbredir_chardev_event(void *opaque, int event)
+{
+    USBRedirDevice *dev = opaque;
+
+    switch (event) {
+    case CHR_EVENT_OPENED:
+    case CHR_EVENT_CLOSED:
+        qemu_bh_schedule(dev->open_close_bh);
+        break;
+    }
+}
+
+/*
+ * init + destroy
+ */
+
+static int usbredir_initfn(USBDevice *udev)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+    int i;
+
+    if (dev->cs == NULL) {
+        qerror_report(QERR_MISSING_PARAMETER, "chardev");
+        return -1;
+    }
+
+    if (dev->filter_str) {
+        i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|",
+                                           &dev->filter_rules,
+                                           &dev->filter_rules_count);
+        if (i) {
+            qerror_report(QERR_INVALID_PARAMETER_VALUE, "filter",
+                          "a usb device filter string");
+            return -1;
+        }
+    }
+
+    dev->open_close_bh = qemu_bh_new(usbredir_open_close_bh, dev);
+    dev->attach_timer = qemu_new_timer_ms(vm_clock, usbredir_do_attach, dev);
+
+    QTAILQ_INIT(&dev->asyncq);
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        QTAILQ_INIT(&dev->endpoint[i].bufpq);
+    }
+
+    /* We'll do the attach once we receive the speed from the usb-host */
+    udev->auto_attach = 0;
+
+    /* Let the backend know we are ready */
+    qemu_chr_fe_open(dev->cs);
+    qemu_chr_add_handlers(dev->cs, usbredir_chardev_can_read,
+                          usbredir_chardev_read, usbredir_chardev_event, dev);
+
+    return 0;
+}
+
+static void usbredir_cleanup_device_queues(USBRedirDevice *dev)
+{
+    AsyncURB *aurb, *next_aurb;
+    int i;
+
+    QTAILQ_FOREACH_SAFE(aurb, &dev->asyncq, next, next_aurb) {
+        async_free(dev, aurb);
+    }
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        usbredir_free_bufpq(dev, I2EP(i));
+    }
+}
+
+static void usbredir_handle_destroy(USBDevice *udev)
+{
+    USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+    qemu_chr_fe_close(dev->cs);
+    qemu_chr_delete(dev->cs);
+    /* Note must be done after qemu_chr_close, as that causes a close event */
+    qemu_bh_delete(dev->open_close_bh);
+
+    qemu_del_timer(dev->attach_timer);
+    qemu_free_timer(dev->attach_timer);
+
+    usbredir_cleanup_device_queues(dev);
+
+    if (dev->parser) {
+        usbredirparser_destroy(dev->parser);
+    }
+
+    free(dev->filter_rules);
+}
+
+static int usbredir_check_filter(USBRedirDevice *dev)
+{
+    if (dev->interface_info.interface_count == 0) {
+        ERROR("No interface info for device\n");
+        goto error;
+    }
+
+    if (dev->filter_rules) {
+        if (!usbredirparser_peer_has_cap(dev->parser,
+                                    usb_redir_cap_connect_device_version)) {
+            ERROR("Device filter specified and peer does not have the "
+                  "connect_device_version capability\n");
+            goto error;
+        }
+
+        if (usbredirfilter_check(
+                dev->filter_rules,
+                dev->filter_rules_count,
+                dev->device_info.device_class,
+                dev->device_info.device_subclass,
+                dev->device_info.device_protocol,
+                dev->interface_info.interface_class,
+                dev->interface_info.interface_subclass,
+                dev->interface_info.interface_protocol,
+                dev->interface_info.interface_count,
+                dev->device_info.vendor_id,
+                dev->device_info.product_id,
+                dev->device_info.device_version_bcd,
+                0) != 0) {
+            goto error;
+        }
+    }
+
+    return 0;
+
+error:
+    usbredir_device_disconnect(dev);
+    if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) {
+        usbredirparser_send_filter_reject(dev->parser);
+        usbredirparser_do_write(dev->parser);
+    }
+    return -1;
+}
+
+/*
+ * usbredirparser packet complete callbacks
+ */
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+                                       int status, int actual_len)
+{
+    switch (status) {
+    case usb_redir_success:
+        return actual_len;
+    case usb_redir_stall:
+        return USB_RET_STALL;
+    case usb_redir_cancelled:
+        WARNING("returning cancelled packet to HC?\n");
+        return USB_RET_NAK;
+    case usb_redir_inval:
+        WARNING("got invalid param error from usb-host?\n");
+        return USB_RET_NAK;
+    case usb_redir_ioerror:
+    case usb_redir_timeout:
+    default:
+        return USB_RET_IOERROR;
+    }
+}
+
+static void usbredir_hello(void *priv, struct usb_redir_hello_header *h)
+{
+    USBRedirDevice *dev = priv;
+
+    /* Try to send the filter info now that we've the usb-host's caps */
+    if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) &&
+            dev->filter_rules) {
+        usbredirparser_send_filter_filter(dev->parser, dev->filter_rules,
+                                          dev->filter_rules_count);
+        usbredirparser_do_write(dev->parser);
+    }
+}
+
+static void usbredir_device_connect(void *priv,
+    struct usb_redir_device_connect_header *device_connect)
+{
+    USBRedirDevice *dev = priv;
+    const char *speed;
+
+    if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+        ERROR("Received device connect while already connected\n");
+        return;
+    }
+
+    switch (device_connect->speed) {
+    case usb_redir_speed_low:
+        speed = "low speed";
+        dev->dev.speed = USB_SPEED_LOW;
+        break;
+    case usb_redir_speed_full:
+        speed = "full speed";
+        dev->dev.speed = USB_SPEED_FULL;
+        break;
+    case usb_redir_speed_high:
+        speed = "high speed";
+        dev->dev.speed = USB_SPEED_HIGH;
+        break;
+    case usb_redir_speed_super:
+        speed = "super speed";
+        dev->dev.speed = USB_SPEED_SUPER;
+        break;
+    default:
+        speed = "unknown speed";
+        dev->dev.speed = USB_SPEED_FULL;
+    }
+
+    if (usbredirparser_peer_has_cap(dev->parser,
+                                    usb_redir_cap_connect_device_version)) {
+        INFO("attaching %s device %04x:%04x version %d.%d class %02x\n",
+             speed, device_connect->vendor_id, device_connect->product_id,
+             ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 +
+             ((device_connect->device_version_bcd & 0x0f00) >>  8),
+             ((device_connect->device_version_bcd & 0x00f0) >>  4) * 10 +
+             ((device_connect->device_version_bcd & 0x000f) >>  0),
+             device_connect->device_class);
+    } else {
+        INFO("attaching %s device %04x:%04x class %02x\n", speed,
+             device_connect->vendor_id, device_connect->product_id,
+             device_connect->device_class);
+    }
+
+    dev->dev.speedmask = (1 << dev->dev.speed);
+    dev->device_info = *device_connect;
+
+    if (usbredir_check_filter(dev)) {
+        WARNING("Device %04x:%04x rejected by device filter, not attaching\n",
+                device_connect->vendor_id, device_connect->product_id);
+        return;
+    }
+
+    qemu_mod_timer(dev->attach_timer, dev->next_attach_time);
+}
+
+static void usbredir_device_disconnect(void *priv)
+{
+    USBRedirDevice *dev = priv;
+    int i;
+
+    /* Stop any pending attaches */
+    qemu_del_timer(dev->attach_timer);
+
+    if (dev->dev.attached) {
+        usb_device_detach(&dev->dev);
+        /*
+         * Delay next usb device attach to give the guest a chance to see
+         * see the detach / attach in case of quick close / open succession
+         */
+        dev->next_attach_time = qemu_get_clock_ms(vm_clock) + 200;
+    }
+
+    /* Reset state so that the next dev connected starts with a clean slate */
+    usbredir_cleanup_device_queues(dev);
+    memset(dev->endpoint, 0, sizeof(dev->endpoint));
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        QTAILQ_INIT(&dev->endpoint[i].bufpq);
+    }
+    usb_ep_init(&dev->dev);
+    dev->interface_info.interface_count = 0;
+}
+
+static void usbredir_interface_info(void *priv,
+    struct usb_redir_interface_info_header *interface_info)
+{
+    USBRedirDevice *dev = priv;
+
+    dev->interface_info = *interface_info;
+
+    /*
+     * If we receive interface info after the device has already been
+     * connected (ie on a set_config), re-check the filter.
+     */
+    if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+        if (usbredir_check_filter(dev)) {
+            ERROR("Device no longer matches filter after interface info "
+                  "change, disconnecting!\n");
+        }
+    }
+}
+
+static void usbredir_ep_info(void *priv,
+    struct usb_redir_ep_info_header *ep_info)
+{
+    USBRedirDevice *dev = priv;
+    struct USBEndpoint *usb_ep;
+    int i;
+
+    for (i = 0; i < MAX_ENDPOINTS; i++) {
+        dev->endpoint[i].type = ep_info->type[i];
+        dev->endpoint[i].interval = ep_info->interval[i];
+        dev->endpoint[i].interface = ep_info->interface[i];
+        switch (dev->endpoint[i].type) {
+        case usb_redir_type_invalid:
+            break;
+        case usb_redir_type_iso:
+        case usb_redir_type_interrupt:
+            if (dev->endpoint[i].interval == 0) {
+                ERROR("Received 0 interval for isoc or irq endpoint\n");
+                usbredir_device_disconnect(dev);
+            }
+            /* Fall through */
+        case usb_redir_type_control:
+        case usb_redir_type_bulk:
+            DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i),
+                    dev->endpoint[i].type, dev->endpoint[i].interface);
+            break;
+        default:
+            ERROR("Received invalid endpoint type\n");
+            usbredir_device_disconnect(dev);
+            return;
+        }
+        usb_ep = usb_ep_get(&dev->dev,
+                            (i & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT,
+                            i & 0x0f);
+        usb_ep->type = dev->endpoint[i].type;
+        usb_ep->ifnum = dev->endpoint[i].interface;
+    }
+}
+
+static void usbredir_configuration_status(void *priv, uint32_t id,
+    struct usb_redir_configuration_status_header *config_status)
+{
+    USBRedirDevice *dev = priv;
+    AsyncURB *aurb;
+    int len = 0;
+
+    DPRINTF("set config status %d config %d id %u\n", config_status->status,
+            config_status->configuration, id);
+
+    aurb = async_find(dev, id);
+    if (!aurb) {
+        return;
+    }
+    if (aurb->packet) {
+        if (aurb->get) {
+            dev->dev.data_buf[0] = config_status->configuration;
+            len = 1;
+        }
+        aurb->packet->result =
+            usbredir_handle_status(dev, config_status->status, len);
+        usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+    }
+    async_free(dev, aurb);
+}
+
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+    struct usb_redir_alt_setting_status_header *alt_setting_status)
+{
+    USBRedirDevice *dev = priv;
+    AsyncURB *aurb;
+    int len = 0;
+
+    DPRINTF("alt status %d intf %d alt %d id: %u\n",
+            alt_setting_status->status,
+            alt_setting_status->interface,
+            alt_setting_status->alt, id);
+
+    aurb = async_find(dev, id);
+    if (!aurb) {
+        return;
+    }
+    if (aurb->packet) {
+        if (aurb->get) {
+            dev->dev.data_buf[0] = alt_setting_status->alt;
+            len = 1;
+        }
+        aurb->packet->result =
+            usbredir_handle_status(dev, alt_setting_status->status, len);
+        usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+    }
+    async_free(dev, aurb);
+}
+
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+    struct usb_redir_iso_stream_status_header *iso_stream_status)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = iso_stream_status->endpoint;
+
+    DPRINTF("iso status %d ep %02X id %u\n", iso_stream_status->status,
+            ep, id);
+
+    if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) {
+        return;
+    }
+
+    dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status;
+    if (iso_stream_status->status == usb_redir_stall) {
+        DPRINTF("iso stream stopped by peer ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].iso_started = 0;
+    }
+}
+
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+    struct usb_redir_interrupt_receiving_status_header
+    *interrupt_receiving_status)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = interrupt_receiving_status->endpoint;
+
+    DPRINTF("interrupt recv status %d ep %02X id %u\n",
+            interrupt_receiving_status->status, ep, id);
+
+    if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) {
+        return;
+    }
+
+    dev->endpoint[EP2I(ep)].interrupt_error =
+        interrupt_receiving_status->status;
+    if (interrupt_receiving_status->status == usb_redir_stall) {
+        DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep);
+        dev->endpoint[EP2I(ep)].interrupt_started = 0;
+    }
+}
+
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+    struct usb_redir_bulk_streams_status_header *bulk_streams_status)
+{
+}
+
+static void usbredir_control_packet(void *priv, uint32_t id,
+    struct usb_redir_control_packet_header *control_packet,
+    uint8_t *data, int data_len)
+{
+    USBRedirDevice *dev = priv;
+    int len = control_packet->length;
+    AsyncURB *aurb;
+
+    DPRINTF("ctrl-in status %d len %d id %u\n", control_packet->status,
+            len, id);
+
+    aurb = async_find(dev, id);
+    if (!aurb) {
+        free(data);
+        return;
+    }
+
+    aurb->control_packet.status = control_packet->status;
+    aurb->control_packet.length = control_packet->length;
+    if (memcmp(&aurb->control_packet, control_packet,
+               sizeof(*control_packet))) {
+        ERROR("return control packet mismatch, please report this!\n");
+        len = USB_RET_NAK;
+    }
+
+    if (aurb->packet) {
+        len = usbredir_handle_status(dev, control_packet->status, len);
+        if (len > 0) {
+            usbredir_log_data(dev, "ctrl data in:", data, data_len);
+            if (data_len <= sizeof(dev->dev.data_buf)) {
+                memcpy(dev->dev.data_buf, data, data_len);
+            } else {
+                ERROR("ctrl buffer too small (%d > %zu)\n",
+                      data_len, sizeof(dev->dev.data_buf));
+                len = USB_RET_STALL;
+            }
+        }
+        aurb->packet->result = len;
+        usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+    }
+    async_free(dev, aurb);
+    free(data);
+}
+
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+    struct usb_redir_bulk_packet_header *bulk_packet,
+    uint8_t *data, int data_len)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = bulk_packet->endpoint;
+    int len = bulk_packet->length;
+    AsyncURB *aurb;
+
+    DPRINTF("bulk-in status %d ep %02X len %d id %u\n", bulk_packet->status,
+            ep, len, id);
+
+    aurb = async_find(dev, id);
+    if (!aurb) {
+        free(data);
+        return;
+    }
+
+    if (aurb->bulk_packet.endpoint != bulk_packet->endpoint ||
+            aurb->bulk_packet.stream_id != bulk_packet->stream_id) {
+        ERROR("return bulk packet mismatch, please report this!\n");
+        len = USB_RET_NAK;
+    }
+
+    if (aurb->packet) {
+        len = usbredir_handle_status(dev, bulk_packet->status, len);
+        if (len > 0) {
+            usbredir_log_data(dev, "bulk data in:", data, data_len);
+            if (data_len <= aurb->packet->iov.size) {
+                usb_packet_copy(aurb->packet, data, data_len);
+            } else {
+                ERROR("bulk buffer too small (%d > %zd)\n", data_len,
+                      aurb->packet->iov.size);
+                len = USB_RET_STALL;
+            }
+        }
+        aurb->packet->result = len;
+        usb_packet_complete(&dev->dev, aurb->packet);
+    }
+    async_free(dev, aurb);
+    free(data);
+}
+
+static void usbredir_iso_packet(void *priv, uint32_t id,
+    struct usb_redir_iso_packet_header *iso_packet,
+    uint8_t *data, int data_len)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = iso_packet->endpoint;
+
+    DPRINTF2("iso-in status %d ep %02X len %d id %u\n", iso_packet->status, ep,
+             data_len, id);
+
+    if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) {
+        ERROR("received iso packet for non iso endpoint %02X\n", ep);
+        free(data);
+        return;
+    }
+
+    if (dev->endpoint[EP2I(ep)].iso_started == 0) {
+        DPRINTF("received iso packet for non started stream ep %02X\n", ep);
+        free(data);
+        return;
+    }
+
+    /* bufp_alloc also adds the packet to the ep queue */
+    bufp_alloc(dev, data, data_len, iso_packet->status, ep);
+}
+
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+    struct usb_redir_interrupt_packet_header *interrupt_packet,
+    uint8_t *data, int data_len)
+{
+    USBRedirDevice *dev = priv;
+    uint8_t ep = interrupt_packet->endpoint;
+
+    DPRINTF("interrupt-in status %d ep %02X len %d id %u\n",
+            interrupt_packet->status, ep, data_len, id);
+
+    if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) {
+        ERROR("received int packet for non interrupt endpoint %02X\n", ep);
+        free(data);
+        return;
+    }
+
+    if (ep & USB_DIR_IN) {
+        if (dev->endpoint[EP2I(ep)].interrupt_started == 0) {
+            DPRINTF("received int packet while not started ep %02X\n", ep);
+            free(data);
+            return;
+        }
+
+        /* bufp_alloc also adds the packet to the ep queue */
+        bufp_alloc(dev, data, data_len, interrupt_packet->status, ep);
+    } else {
+        int len = interrupt_packet->length;
+
+        AsyncURB *aurb = async_find(dev, id);
+        if (!aurb) {
+            return;
+        }
+
+        if (aurb->interrupt_packet.endpoint != interrupt_packet->endpoint) {
+            ERROR("return int packet mismatch, please report this!\n");
+            len = USB_RET_NAK;
+        }
+
+        if (aurb->packet) {
+            aurb->packet->result = usbredir_handle_status(dev,
+                                               interrupt_packet->status, len);
+            usb_packet_complete(&dev->dev, aurb->packet);
+        }
+        async_free(dev, aurb);
+    }
+}
+
+static Property usbredir_properties[] = {
+    DEFINE_PROP_CHR("chardev", USBRedirDevice, cs),
+    DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, 0),
+    DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usbredir_class_initfn(ObjectClass *klass, void *data)
+{
+    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    uc->init           = usbredir_initfn;
+    uc->product_desc   = "USB Redirection Device";
+    uc->handle_destroy = usbredir_handle_destroy;
+    uc->cancel_packet  = usbredir_cancel_packet;
+    uc->handle_reset   = usbredir_handle_reset;
+    uc->handle_data    = usbredir_handle_data;
+    uc->handle_control = usbredir_handle_control;
+    dc->props          = usbredir_properties;
+}
+
+static TypeInfo usbredir_dev_info = {
+    .name          = "usb-redir",
+    .parent        = TYPE_USB_DEVICE,
+    .instance_size = sizeof(USBRedirDevice),
+    .class_init    = usbredir_class_initfn,
+};
+
+static void usbredir_register_types(void)
+{
+    type_register_static(&usbredir_dev_info);
+}
+
+type_init(usbredir_register_types)
diff --git a/hw/versatilepb.c b/hw/versatilepb.c
index b9102f4..c1687a5 100644
--- a/hw/versatilepb.c
+++ b/hw/versatilepb.c
@@ -13,7 +13,6 @@
 #include "net.h"
 #include "sysemu.h"
 #include "pci.h"
-#include "usb-ohci.h"
 #include "boards.h"
 #include "blockdev.h"
 #include "exec-memory.h"
@@ -240,7 +239,7 @@ static void versatile_init(ram_addr_t ram_size,
         }
     }
     if (usb_enabled) {
-        usb_ohci_init_pci(pci_bus, -1);
+        pci_create_simple(pci_bus, -1, "pci-ohci");
     }
     n = drive_get_max_bus(IF_SCSI);
     while (n >= 0) {