Remove blanks before \n in output strings

Those blanks violate the coding conventions, see
scripts/checkpatch.pl.

Blanks missing after colons in the changed lines were added.

This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

7 files changed, 28 insertions, 28 deletions

diff --git a/hw/bonito.c b/hw/bonito.c
index 8708e95..fdb8198 100644
--- a/hw/bonito.c
+++ b/hw/bonito.c
@@ -241,7 +241,7 @@ static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
 
     saddr = (addr - BONITO_REGBASE) >> 2;
 
-    DPRINTF("bonito_writel "TARGET_FMT_plx" val %x saddr %x \n", addr, val, saddr);
+    DPRINTF("bonito_writel "TARGET_FMT_plx" val %x saddr %x\n", addr, val, saddr);
     switch (saddr) {
     case BONITO_BONPONCFG:
     case BONITO_IODEVCFG:
@@ -287,10 +287,10 @@ static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
         break;
     case BONITO_INTEN:
     case BONITO_INTISR:
-        DPRINTF("write to readonly bonito register %x \n", saddr);
+        DPRINTF("write to readonly bonito register %x\n", saddr);
         break;
     default:
-        DPRINTF("write to unknown bonito register %x \n", saddr);
+        DPRINTF("write to unknown bonito register %x\n", saddr);
         break;
     }
 }
@@ -302,7 +302,7 @@ static uint32_t bonito_readl(void *opaque, target_phys_addr_t addr)
 
     saddr = (addr - BONITO_REGBASE) >> 2;
 
-    DPRINTF("bonito_readl "TARGET_FMT_plx"  \n", addr);
+    DPRINTF("bonito_readl "TARGET_FMT_plx"\n", addr);
     switch (saddr) {
     case BONITO_INTISR:
         return s->regs[saddr];
@@ -328,7 +328,7 @@ static void bonito_pciconf_writel(void *opaque, target_phys_addr_t addr,
 {
     PCIBonitoState *s = opaque;
 
-    DPRINTF("bonito_pciconf_writel "TARGET_FMT_plx" val %x \n", addr, val);
+    DPRINTF("bonito_pciconf_writel "TARGET_FMT_plx" val %x\n", addr, val);
     s->dev.config_write(&s->dev, addr, val, 4);
 }
 
@@ -443,7 +443,7 @@ static uint32_t bonito_sbridge_pciaddr(void *opaque, target_phys_addr_t addr)
         exit(1);
     }
     pciaddr = PCI_ADDR(pci_bus_num(s->pcihost->bus), devno, funno, regno);
-    DPRINTF("cfgaddr %x pciaddr %x busno %x devno %d funno %d regno %d \n",
+    DPRINTF("cfgaddr %x pciaddr %x busno %x devno %d funno %d regno %d\n",
         cfgaddr, pciaddr, pci_bus_num(s->pcihost->bus), devno, funno, regno);
 
     return pciaddr;
@@ -456,7 +456,7 @@ static void bonito_spciconf_writeb(void *opaque, target_phys_addr_t addr,
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_writeb "TARGET_FMT_plx" val %x \n", addr, val);
+    DPRINTF("bonito_spciconf_writeb "TARGET_FMT_plx" val %x\n", addr, val);
     pciaddr = bonito_sbridge_pciaddr(s, addr);
 
     if (pciaddr == 0xffffffff) {
@@ -480,7 +480,7 @@ static void bonito_spciconf_writew(void *opaque, target_phys_addr_t addr,
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_writew "TARGET_FMT_plx" val %x \n", addr, val);
+    DPRINTF("bonito_spciconf_writew "TARGET_FMT_plx" val %x\n", addr, val);
     assert((addr&0x1)==0);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);
@@ -506,7 +506,7 @@ static void bonito_spciconf_writel(void *opaque, target_phys_addr_t addr,
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_writel "TARGET_FMT_plx" val %x \n", addr, val);
+    DPRINTF("bonito_spciconf_writel "TARGET_FMT_plx" val %x\n", addr, val);
     assert((addr&0x3)==0);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);
@@ -531,7 +531,7 @@ static uint32_t bonito_spciconf_readb(void *opaque, target_phys_addr_t addr)
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_readb "TARGET_FMT_plx"  \n", addr);
+    DPRINTF("bonito_spciconf_readb "TARGET_FMT_plx"\n", addr);
     pciaddr = bonito_sbridge_pciaddr(s, addr);
 
     if (pciaddr == 0xffffffff) {
@@ -555,7 +555,7 @@ static uint32_t bonito_spciconf_readw(void *opaque, target_phys_addr_t addr)
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_readw "TARGET_FMT_plx"  \n", addr);
+    DPRINTF("bonito_spciconf_readw "TARGET_FMT_plx"\n", addr);
     assert((addr&0x1)==0);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);
@@ -581,7 +581,7 @@ static uint32_t bonito_spciconf_readl(void *opaque, target_phys_addr_t addr)
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_readl "TARGET_FMT_plx"  \n", addr);
+    DPRINTF("bonito_spciconf_readl "TARGET_FMT_plx"\n", addr);
     assert((addr&0x3) == 0);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);
diff --git a/hw/fmopl.c b/hw/fmopl.c
index d8a0f36..5ad52ab 100644
--- a/hw/fmopl.c
+++ b/hw/fmopl.c
@@ -606,7 +606,7 @@ static void init_timetables( FM_OPL *OPL , int ARRATE , int DRRATE )
 	}
 #if 0
 	for (i = 0;i < 64 ;i++){	/* make for overflow area */
-		LOG(LOG_WAR,("rate %2d , ar %f ms , dr %f ms \n",i,
+		LOG(LOG_WAR, ("rate %2d , ar %f ms , dr %f ms\n", i,
 			((double)(EG_ENT<<ENV_BITS) / OPL->AR_TABLE[i]) * (1000.0 / OPL->rate),
 			((double)(EG_ENT<<ENV_BITS) / OPL->DR_TABLE[i]) * (1000.0 / OPL->rate) ));
 	}
diff --git a/hw/hpet.c b/hw/hpet.c
index 4eda33d..12bd64d 100644
--- a/hw/hpet.c
+++ b/hw/hpet.c
@@ -397,7 +397,7 @@ static uint32_t hpet_ram_readl(void *opaque, target_phys_addr_t addr)
         case HPET_CFG:
             return s->config;
         case HPET_CFG + 4:
-            DPRINTF("qemu: invalid HPET_CFG + 4 hpet_ram_readl \n");
+            DPRINTF("qemu: invalid HPET_CFG + 4 hpet_ram_readl\n");
             return 0;
         case HPET_COUNTER:
             if (hpet_enabled(s)) {
@@ -458,7 +458,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
         uint8_t timer_id = (addr - 0x100) / 0x20;
         HPETTimer *timer = &s->timer[timer_id];
 
-        DPRINTF("qemu: hpet_ram_writel timer_id = %#x \n", timer_id);
+        DPRINTF("qemu: hpet_ram_writel timer_id = %#x\n", timer_id);
         if (timer_id > s->num_timers) {
             DPRINTF("qemu: timer id out of range\n");
             return;
@@ -485,7 +485,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
             DPRINTF("qemu: invalid HPET_TN_CFG+4 write\n");
             break;
         case HPET_TN_CMP: // comparator register
-            DPRINTF("qemu: hpet_ram_writel HPET_TN_CMP \n");
+            DPRINTF("qemu: hpet_ram_writel HPET_TN_CMP\n");
             if (timer->config & HPET_TN_32BIT) {
                 new_val = (uint32_t)new_val;
             }
@@ -570,7 +570,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
             }
             break;
         case HPET_CFG + 4:
-            DPRINTF("qemu: invalid HPET_CFG+4 write \n");
+            DPRINTF("qemu: invalid HPET_CFG+4 write\n");
             break;
         case HPET_STATUS:
             val = new_val & s->isr;
diff --git a/hw/loader.c b/hw/loader.c
index 8efb146..5676c18 100644
--- a/hw/loader.c
+++ b/hw/loader.c
@@ -779,13 +779,13 @@ void do_info_roms(Monitor *mon)
     QTAILQ_FOREACH(rom, &roms, next) {
         if (!rom->fw_file) {
             monitor_printf(mon, "addr=" TARGET_FMT_plx
-                           " size=0x%06zx mem=%s name=\"%s\" \n",
+                           " size=0x%06zx mem=%s name=\"%s\"\n",
                            rom->addr, rom->romsize,
                            rom->isrom ? "rom" : "ram",
                            rom->name);
         } else {
             monitor_printf(mon, "fw=%s/%s"
-                           " size=0x%06zx name=\"%s\" \n",
+                           " size=0x%06zx name=\"%s\"\n",
                            rom->fw_dir,
                            rom->fw_file,
                            rom->romsize,
diff --git a/hw/mips_fulong2e.c b/hw/mips_fulong2e.c
index abe3056..f52b8c5 100644
--- a/hw/mips_fulong2e.c
+++ b/hw/mips_fulong2e.c
@@ -343,7 +343,7 @@ static void mips_fulong2e_init(ram_addr_t ram_size, const char *boot_device,
 
     via_devfn = vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 0));
     if (via_devfn < 0) {
-        fprintf(stderr, "vt82c686b_init error \n");
+        fprintf(stderr, "vt82c686b_init error\n");
         exit(1);
     }
 
diff --git a/hw/mst_fpga.c b/hw/mst_fpga.c
index 4e47574..7bcd5d7 100644
--- a/hw/mst_fpga.c
+++ b/hw/mst_fpga.c
@@ -118,7 +118,7 @@ mst_fpga_readb(void *opaque, target_phys_addr_t addr)
 		return s->pcmcia1;
 	default:
 		printf("Mainstone - mst_fpga_readb: Bad register offset "
-			"0x" TARGET_FMT_plx " \n", addr);
+			"0x" TARGET_FMT_plx "\n", addr);
 	}
 	return 0;
 }
@@ -171,7 +171,7 @@ mst_fpga_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
 		break;
 	default:
 		printf("Mainstone - mst_fpga_writeb: Bad register offset "
-			"0x" TARGET_FMT_plx " \n", addr);
+			"0x" TARGET_FMT_plx "\n", addr);
 	}
 }
 
diff --git a/hw/vt82c686.c b/hw/vt82c686.c
index 5c973ed..b9fcc0e 100644
--- a/hw/vt82c686.c
+++ b/hw/vt82c686.c
@@ -49,7 +49,7 @@ static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
     int can_write;
     SuperIOConfig *superio_conf = opaque;
 
-    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x  \n", addr, data);
+    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
     if (addr == 0x3f0) {
         superio_conf->index = data & 0xff;
     } else {
@@ -73,12 +73,12 @@ static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
                 switch (superio_conf->index) {
                 case 0xe7:
                     if ((data & 0xff) != 0xfe) {
-                        DPRINTF("chage uart 1 base. unsupported yet \n");
+                        DPRINTF("chage uart 1 base. unsupported yet\n");
                     }
                     break;
                 case 0xe8:
                     if ((data & 0xff) != 0xbe) {
-                        DPRINTF("chage uart 2 base. unsupported yet \n");
+                        DPRINTF("chage uart 2 base. unsupported yet\n");
                     }
                     break;
 
@@ -95,7 +95,7 @@ static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
 {
     SuperIOConfig *superio_conf = opaque;
 
-    DPRINTF("superio_ioport_readb  address 0x%x   \n", addr);
+    DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
     return (superio_conf->config[superio_conf->index]);
 }
 
@@ -133,7 +133,7 @@ static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
 {
     VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);
 
-    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x \n",
+    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
            address, val, len);
 
     pci_default_write_config(d, address, val, len);
@@ -285,7 +285,7 @@ static void pm_io_space_update(VT686PMState *s)
 static void pm_write_config(PCIDevice *d,
                             uint32_t address, uint32_t val, int len)
 {
-    DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x \n",
+    DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
            address, val, len);
     pci_default_write_config(d, address, val, len);
 }