LAN9118 emulation

Add SMSC LAN9118 ethernet emulation.

Signed-off-by: Paul Brook <paul@codesourcery.com>

2 files changed, 1096 insertions, 0 deletions

diff --git a/hw/devices.h b/hw/devices.h
index 156bde2..0ac561d 100644
--- a/hw/devices.h
+++ b/hw/devices.h
@@ -6,6 +6,9 @@
 /* smc91c111.c */
 void smc91c111_init(NICInfo *, uint32_t, qemu_irq);
 
+/* lan9118.c */
+void lan9118_init(NICInfo *, uint32_t, qemu_irq);
+
 /* tsc210x.c */
 uWireSlave *tsc2102_init(qemu_irq pint);
 uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
diff --git a/hw/lan9118.c b/hw/lan9118.c
new file mode 100644
index 0000000..6394f3a
--- /dev/null
+++ b/hw/lan9118.c
@@ -0,0 +1,1093 @@
+/*
+ * SMSC LAN9118 Ethernet interface emulation
+ *
+ * Copyright (c) 2009 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This code is licenced under the GNU GPL v2
+ */
+
+#include "sysbus.h"
+#include "net.h"
+#include "devices.h"
+/* For crc32 */
+#include <zlib.h>
+
+//#define DEBUG_LAN9118
+
+#ifdef DEBUG_LAN9118
+#define DPRINTF(fmt, ...) \
+do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+#define CSR_ID_REV      0x50
+#define CSR_IRQ_CFG     0x54
+#define CSR_INT_STS     0x58
+#define CSR_INT_EN      0x5c
+#define CSR_BYTE_TEST   0x64
+#define CSR_FIFO_INT    0x68
+#define CSR_RX_CFG      0x6c
+#define CSR_TX_CFG      0x70
+#define CSR_HW_CFG      0x74
+#define CSR_RX_DP_CTRL  0x78
+#define CSR_RX_FIFO_INF 0x7c
+#define CSR_TX_FIFO_INF 0x80
+#define CSR_PMT_CTRL    0x84
+#define CSR_GPIO_CFG    0x88
+#define CSR_GPT_CFG     0x8c /* TODO */
+#define CSR_GPT_CNT     0x90 /* TODO */
+#define CSR_WORD_SWAP   0x98
+#define CSR_FREE_RUN    0x9c
+#define CSR_RX_DROP     0xa0
+#define CSR_MAC_CSR_CMD 0xa4
+#define CSR_MAC_CSR_DATA 0xa8
+#define CSR_AFC_CFG     0xac
+#define CSR_E2P_CMD     0xb0
+#define CSR_E2P_DATA    0xb4
+
+/* IRQ_CFG */
+#define IRQ_EN          0x00000100
+#define IRQ_POL         0x00000010
+#define IRQ_TYPE        0x00000001
+
+/* INT_STS/INT_EN */
+#define SW_INT          0x80000000
+#define TXSTOP_INT      0x02000000
+#define RXSTOP_INT      0x01000000
+#define RXDFH_INT       0x00800000
+#define TX_IOC_INT      0x00200000
+#define RXD_INT         0x00100000
+#define GPT_INT         0x00080000
+#define PHY_INT         0x00040000
+#define PME_INT         0x00020000
+#define TXSO_INT        0x00010000
+#define RWT_INT         0x00008000
+#define RXE_INT         0x00004000
+#define TXE_INT         0x00002000
+#define TDFU_INT        0x00000800
+#define TDFO_INT        0x00000400
+#define TDFA_INT        0x00000200
+#define TSFF_INT        0x00000100
+#define TSFL_INT        0x00000080
+#define RXDF_INT        0x00000040
+#define RDFL_INT        0x00000020
+#define RSFF_INT        0x00000010
+#define RSFL_INT        0x00000008
+#define GPIO2_INT       0x00000004
+#define GPIO1_INT       0x00000002
+#define GPIO0_INT       0x00000001
+#define RESERVED_INT    0x7c001000
+
+#define MAC_CR          1
+#define MAC_ADDRH       2
+#define MAC_ADDRL       3
+#define MAC_HASHH       4
+#define MAC_HASHL       5
+#define MAC_MII_ACC     6
+#define MAC_MII_DATA    7
+#define MAC_FLOW        8
+#define MAC_VLAN1       9 /* TODO */
+#define MAC_VLAN2       10 /* TODO */
+#define MAC_WUFF        11 /* TODO */
+#define MAC_WUCSR       12 /* TODO */
+
+#define MAC_CR_RXALL    0x80000000
+#define MAC_CR_RCVOWN   0x00800000
+#define MAC_CR_LOOPBK   0x00200000
+#define MAC_CR_FDPX     0x00100000
+#define MAC_CR_MCPAS    0x00080000
+#define MAC_CR_PRMS     0x00040000
+#define MAC_CR_INVFILT  0x00020000
+#define MAC_CR_PASSBAD  0x00010000
+#define MAC_CR_HO       0x00008000
+#define MAC_CR_HPFILT   0x00002000
+#define MAC_CR_LCOLL    0x00001000
+#define MAC_CR_BCAST    0x00000800
+#define MAC_CR_DISRTY   0x00000400
+#define MAC_CR_PADSTR   0x00000100
+#define MAC_CR_BOLMT    0x000000c0
+#define MAC_CR_DFCHK    0x00000020
+#define MAC_CR_TXEN     0x00000008
+#define MAC_CR_RXEN     0x00000004
+#define MAC_CR_RESERVED 0x7f404213
+
+enum tx_state {
+    TX_IDLE,
+    TX_B,
+    TX_DATA
+};
+
+typedef struct {
+    enum tx_state state;
+    uint32_t cmd_a;
+    uint32_t cmd_b;
+    int buffer_size;
+    int offset;
+    int pad;
+    int fifo_used;
+    int len;
+    uint8_t data[2048];
+} LAN9118Packet;
+
+typedef struct {
+    SysBusDevice busdev;
+    VLANClientState *vc;
+    NICConf conf;
+    qemu_irq irq;
+    int mmio_index;
+
+    uint32_t irq_cfg;
+    uint32_t int_sts;
+    uint32_t int_en;
+    uint32_t fifo_int;
+    uint32_t rx_cfg;
+    uint32_t tx_cfg;
+    uint32_t hw_cfg;
+    uint32_t pmt_ctrl;
+    uint32_t gpio_cfg;
+    uint32_t word_swap;
+    uint32_t free_timer_start;
+    uint32_t mac_cmd;
+    uint32_t mac_data;
+    uint32_t afc_cfg;
+    uint32_t e2p_cmd;
+    uint32_t e2p_data;
+
+    uint32_t mac_cr;
+    uint32_t mac_hashh;
+    uint32_t mac_hashl;
+    uint32_t mac_mii_acc;
+    uint32_t mac_mii_data;
+    uint32_t mac_flow;
+
+    uint32_t phy_status;
+    uint32_t phy_control;
+    uint32_t phy_advertise;
+
+    int eeprom_writable;
+    uint8_t eeprom[8];
+
+    int tx_fifo_size;
+    LAN9118Packet *txp;
+    LAN9118Packet tx_packet;
+
+    int tx_status_fifo_used;
+    int tx_status_fifo_head;
+    uint32_t tx_status_fifo[512];
+
+    int rx_status_fifo_size;
+    int rx_status_fifo_used;
+    int rx_status_fifo_head;
+    uint32_t rx_status_fifo[896];
+    int rx_fifo_size;
+    int rx_fifo_used;
+    int rx_fifo_head;
+    uint32_t rx_fifo[3360];
+    int rx_packet_size_head;
+    int rx_packet_size_tail;
+    int rx_packet_size[1024];
+
+    int rxp_offset;
+    int rxp_size;
+    int rxp_pad;
+} lan9118_state;
+
+static void lan9118_update(lan9118_state *s)
+{
+    int level;
+
+    /* TODO: Implement FIFO level IRQs.  */
+    level = (s->int_sts & s->int_en) != 0;
+    if ((s->irq_cfg & IRQ_EN) == 0) {
+        level = 0;
+    }
+    qemu_set_irq(s->irq, level);
+}
+
+static void lan9118_mac_changed(lan9118_state *s)
+{
+    qemu_format_nic_info_str(s->vc, s->conf.macaddr.a);
+}
+
+static void lan9118_reload_eeprom(lan9118_state *s)
+{
+    int i;
+    if (s->eeprom[0] != 0xa5) {
+        s->e2p_cmd &= ~0x10;
+        DPRINTF("MACADDR load failed\n");
+        return;
+    }
+    for (i = 0; i < 6; i++) {
+        s->conf.macaddr.a[i] = s->eeprom[i + 1];
+    }
+    s->e2p_cmd |= 0x10;
+    DPRINTF("MACADDR loaded from eeprom\n");
+    lan9118_mac_changed(s);
+}
+
+static void phy_update_link(lan9118_state *s)
+{
+    /* Autonegotiation status mirrors link status.  */
+    if (s->vc->link_down) {
+        s->phy_status &= ~0x0024;
+    } else {
+        s->phy_status |= 0x0024;
+    }
+}
+
+static void lan9118_set_link(VLANClientState *vc)
+{
+    phy_update_link(vc->opaque);
+}
+
+static void phy_reset(lan9118_state *s)
+{
+    s->phy_status = 0x7805;
+    s->phy_control = 0x3000;
+    s->phy_advertise = 0x01e1;
+    phy_update_link(s);
+}
+
+static void lan9118_reset(DeviceState *d)
+{
+    lan9118_state *s = FROM_SYSBUS(lan9118_state, sysbus_from_qdev(d));
+
+    s->irq_cfg &= ~(IRQ_TYPE | IRQ_POL);
+    s->int_sts = 0;
+    s->int_en = 0;
+    s->fifo_int = 0x48000000;
+    s->rx_cfg = 0;
+    s->tx_cfg = 0;
+    s->hw_cfg = 0x00050000;
+    s->pmt_ctrl &= 0x45;
+    s->gpio_cfg = 0;
+    s->txp->fifo_used = 0;
+    s->txp->state = TX_IDLE;
+    s->txp->cmd_a = 0xffffffffu;
+    s->txp->cmd_b = 0xffffffffu;
+    s->txp->len = 0;
+    s->txp->fifo_used = 0;
+    s->tx_fifo_size = 4608;
+    s->tx_status_fifo_used = 0;
+    s->rx_status_fifo_size = 704;
+    s->rx_fifo_size = 2640;
+    s->rx_fifo_used = 0;
+    s->rx_status_fifo_size = 176;
+    s->rx_status_fifo_used = 0;
+    s->rxp_offset = 0;
+    s->rxp_size = 0;
+    s->rxp_pad = 0;
+    s->rx_packet_size_tail = s->rx_packet_size_head;
+    s->rx_packet_size[s->rx_packet_size_head] = 0;
+    s->mac_cmd = 0;
+    s->mac_data = 0;
+    s->afc_cfg = 0;
+    s->e2p_cmd = 0;
+    s->e2p_data = 0;
+    s->free_timer_start = qemu_get_clock(vm_clock) / 40;
+
+    s->mac_cr = MAC_CR_PRMS;
+    s->mac_hashh = 0;
+    s->mac_hashl = 0;
+    s->mac_mii_acc = 0;
+    s->mac_mii_data = 0;
+    s->mac_flow = 0;
+
+    phy_reset(s);
+
+    s->eeprom_writable = 0;
+    lan9118_reload_eeprom(s);
+}
+
+static int lan9118_can_receive(VLANClientState *vc)
+{
+    return 1;
+}
+
+static void rx_fifo_push(lan9118_state *s, uint32_t val)
+{
+    int fifo_pos;
+    fifo_pos = s->rx_fifo_head + s->rx_fifo_used;
+    if (fifo_pos >= s->rx_fifo_size)
+      fifo_pos -= s->rx_fifo_size;
+    s->rx_fifo[fifo_pos] = val;
+    s->rx_fifo_used++;
+}
+
+/* Return nonzero if the packet is accepted by the filter.  */
+static int lan9118_filter(lan9118_state *s, const uint8_t *addr)
+{
+    int multicast;
+    uint32_t hash;
+
+    if (s->mac_cr & MAC_CR_PRMS) {
+        return 1;
+    }
+    if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff &&
+        addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) {
+        return (s->mac_cr & MAC_CR_BCAST) == 0;
+    }
+
+    multicast = addr[0] & 1;
+    if (multicast &&s->mac_cr & MAC_CR_MCPAS) {
+        return 1;
+    }
+    if (multicast ? (s->mac_cr & MAC_CR_HPFILT) == 0
+                  : (s->mac_cr & MAC_CR_HO) == 0) {
+        /* Exact matching.  */
+        hash = memcmp(addr, s->conf.macaddr.a, 6);
+        if (s->mac_cr & MAC_CR_INVFILT) {
+            return hash != 0;
+        } else {
+            return hash == 0;
+        }
+    } else {
+        /* Hash matching  */
+        hash = (crc32(~0, addr, 6) >> 26);
+        if (hash & 0x20) {
+            return (s->mac_hashh >> (hash & 0x1f)) & 1;
+        } else {
+            return (s->mac_hashl >> (hash & 0x1f)) & 1;
+        }
+    }
+}
+
+static ssize_t lan9118_receive(VLANClientState *vc, const uint8_t *buf,
+                               size_t size)
+{
+    lan9118_state *s = vc->opaque;
+    int fifo_len;
+    int offset;
+    int src_pos;
+    int n;
+    int filter;
+    uint32_t val;
+    uint32_t crc;
+    uint32_t status;
+
+    if ((s->mac_cr & MAC_CR_RXEN) == 0) {
+        return -1;
+    }
+
+    if (size >= 2048 || size < 14) {
+        return -1;
+    }
+
+    /* TODO: Implement FIFO overflow notification.  */
+    if (s->rx_status_fifo_used == s->rx_status_fifo_size) {
+        return -1;
+    }
+
+    filter = lan9118_filter(s, buf);
+    if (!filter && (s->mac_cr & MAC_CR_RXALL) == 0) {
+        return size;
+    }
+
+    offset = (s->rx_cfg >> 8) & 0x1f;
+    n = offset & 3;
+    fifo_len = (size + n + 3) >> 2;
+    /* Add a word for the CRC.  */
+    fifo_len++;
+    if (s->rx_fifo_size - s->rx_fifo_used < fifo_len) {
+        return -1;
+    }
+
+    DPRINTF("Got packet len:%d fifo:%d filter:%s\n",
+            (int)size, fifo_len, filter ? "pass" : "fail");
+    val = 0;
+    crc = bswap32(crc32(~0, buf, size));
+    for (src_pos = 0; src_pos < size; src_pos++) {
+        val = (val >> 8) | ((uint32_t)buf[src_pos] << 24);
+        n++;
+        if (n == 4) {
+            n = 0;
+            rx_fifo_push(s, val);
+            val = 0;
+        }
+    }
+    if (n) {
+        val >>= ((4 - n) * 8);
+        val |= crc << (n * 8);
+        rx_fifo_push(s, val);
+        val = crc >> ((4 - n) * 8);
+        rx_fifo_push(s, val);
+    } else {
+        rx_fifo_push(s, crc);
+    }
+    n = s->rx_status_fifo_head + s->rx_status_fifo_used;
+    if (n >= s->rx_status_fifo_size) {
+        n -= s->rx_status_fifo_size;
+    }
+    s->rx_packet_size[s->rx_packet_size_tail] = fifo_len;
+    s->rx_packet_size_tail = (s->rx_packet_size_tail + 1023) & 1023;
+    s->rx_status_fifo_used++;
+
+    status = (size + 4) << 16;
+    if (buf[0] == 0xff && buf[1] == 0xff && buf[2] == 0xff &&
+        buf[3] == 0xff && buf[4] == 0xff && buf[5] == 0xff) {
+        status |= 0x00002000;
+    } else if (buf[0] & 1) {
+        status |= 0x00000400;
+    }
+    if (!filter) {
+        status |= 0x40000000;
+    }
+    s->rx_status_fifo[n] = status;
+
+    if (s->rx_status_fifo_used > (s->fifo_int & 0xff)) {
+        s->int_sts |= RSFL_INT;
+    }
+    lan9118_update(s);
+
+    return size;
+}
+
+static uint32_t rx_fifo_pop(lan9118_state *s)
+{
+    int n;
+    uint32_t val;
+
+    if (s->rxp_size == 0 && s->rxp_pad == 0) {
+        s->rxp_size = s->rx_packet_size[s->rx_packet_size_head];
+        s->rx_packet_size[s->rx_packet_size_head] = 0;
+        if (s->rxp_size != 0) {
+            s->rx_packet_size_head = (s->rx_packet_size_head + 1023) & 1023;
+            s->rxp_offset = (s->rx_cfg >> 10) & 7;
+            n = s->rxp_offset + s->rxp_size;
+            switch (s->rx_cfg >> 30) {
+            case 1:
+                n = (-n) & 3;
+                break;
+            case 2:
+                n = (-n) & 7;
+                break;
+            default:
+                n = 0;
+                break;
+            }
+            s->rxp_pad = n;
+            DPRINTF("Pop packet size:%d offset:%d pad: %d\n",
+                    s->rxp_size, s->rxp_offset, s->rxp_pad);
+        }
+    }
+    if (s->rxp_offset > 0) {
+        s->rxp_offset--;
+        val = 0;
+    } else if (s->rxp_size > 0) {
+        s->rxp_size--;
+        val = s->rx_fifo[s->rx_fifo_head++];
+        if (s->rx_fifo_head >= s->rx_fifo_size) {
+            s->rx_fifo_head -= s->rx_fifo_size;
+        }
+        s->rx_fifo_used--;
+    } else if (s->rxp_pad > 0) {
+        s->rxp_pad--;
+        val =  0;
+    } else {
+        DPRINTF("RX underflow\n");
+        s->int_sts |= RXE_INT;
+        val =  0;
+    }
+    lan9118_update(s);
+    return val;
+}
+
+static void do_tx_packet(lan9118_state *s)
+{
+    int n;
+    uint32_t status;
+
+    /* FIXME: Honor TX disable, and allow queueing of packets.  */
+    if (s->phy_control & 0x4000)  {
+        /* This assumes the receive routine doesn't touch the VLANClient.  */
+        lan9118_receive(s->vc, s->txp->data, s->txp->len);
+    } else {
+        qemu_send_packet(s->vc, s->txp->data, s->txp->len);
+    }
+    s->txp->fifo_used = 0;
+
+    if (s->tx_status_fifo_used == 512) {
+        /* Status FIFO full */
+        return;
+    }
+    /* Add entry to status FIFO.  */
+    status = s->txp->cmd_b & 0xffff0000u;
+    DPRINTF("Sent packet tag:%04x len %d\n", status >> 16, s->txp->len);
+    n = (s->tx_status_fifo_head + s->tx_status_fifo_used) & 511;
+    s->tx_status_fifo[n] = status;
+    s->tx_status_fifo_used++;
+    if (s->tx_status_fifo_used == 512) {
+        s->int_sts |= TSFF_INT;
+        /* TODO: Stop transmission.  */
+    }
+}
+
+static uint32_t rx_status_fifo_pop(lan9118_state *s)
+{
+    uint32_t val;
+
+    val = s->rx_status_fifo[s->rx_status_fifo_head];
+    if (s->rx_status_fifo_used != 0) {
+        s->rx_status_fifo_used--;
+        s->rx_status_fifo_head++;
+        if (s->rx_status_fifo_head >= s->rx_status_fifo_size) {
+            s->rx_status_fifo_head -= s->rx_status_fifo_size;
+        }
+        /* ??? What value should be returned when the FIFO is empty?  */
+        DPRINTF("RX status pop 0x%08x\n", val);
+    }
+    return val;
+}
+
+static uint32_t tx_status_fifo_pop(lan9118_state *s)
+{
+    uint32_t val;
+
+    val = s->tx_status_fifo[s->tx_status_fifo_head];
+    if (s->tx_status_fifo_used != 0) {
+        s->tx_status_fifo_used--;
+        s->tx_status_fifo_head = (s->tx_status_fifo_head + 1) & 511;
+        /* ??? What value should be returned when the FIFO is empty?  */
+    }
+    return val;
+}
+
+static void tx_fifo_push(lan9118_state *s, uint32_t val)
+{
+    int n;
+
+    if (s->txp->fifo_used == s->tx_fifo_size) {
+        s->int_sts |= TDFO_INT;
+        return;
+    }
+    switch (s->txp->state) {
+    case TX_IDLE:
+        s->txp->cmd_a = val & 0x831f37ff;
+        s->txp->fifo_used++;
+        s->txp->state = TX_B;
+        break;
+    case TX_B:
+        if (s->txp->cmd_a & 0x2000) {
+            /* First segment */
+            s->txp->cmd_b = val;
+            s->txp->fifo_used++;
+            s->txp->buffer_size = s->txp->cmd_a & 0x7ff;
+            s->txp->offset = (s->txp->cmd_a >> 16) & 0x1f;
+            /* End alignment does not include command words.  */
+            n = (s->txp->buffer_size + s->txp->offset + 3) >> 2;
+            switch ((n >> 24) & 3) {
+            case 1:
+                n = (-n) & 3;
+                break;
+            case 2:
+                n = (-n) & 7;
+                break;
+            default:
+                n = 0;
+            }
+            s->txp->pad = n;
+            s->txp->len = 0;
+        }
+        DPRINTF("Block len:%d offset:%d pad:%d cmd %08x\n",
+                s->txp->buffer_size, s->txp->offset, s->txp->pad,
+                s->txp->cmd_a);
+        s->txp->state = TX_DATA;
+        break;
+    case TX_DATA:
+        if (s->txp->offset >= 4) {
+            s->txp->offset -= 4;
+            break;
+        }
+        if (s->txp->buffer_size <= 0 && s->txp->pad != 0) {
+            s->txp->pad--;
+        } else {
+            n = 4;
+            while (s->txp->offset) {
+                val >>= 8;
+                n--;
+                s->txp->offset--;
+            }
+            /* Documentation is somewhat unclear on the ordering of bytes
+               in FIFO words.  Empirical results show it to be little-endian.
+               */
+            /* TODO: FIFO overflow checking.  */
+            while (n--) {
+                s->txp->data[s->txp->len] = val & 0xff;
+                s->txp->len++;
+                val >>= 8;
+                s->txp->buffer_size--;
+            }
+            s->txp->fifo_used++;
+        }
+        if (s->txp->buffer_size <= 0 && s->txp->pad == 0) {
+            if (s->txp->cmd_a & 0x1000) {
+                do_tx_packet(s);
+            }
+            if (s->txp->cmd_a & 0x80000000) {
+                s->int_sts |= TX_IOC_INT;
+            }
+            s->txp->state = TX_IDLE;
+        }
+        break;
+    }
+}
+
+static uint32_t do_phy_read(lan9118_state *s, int reg)
+{
+    switch (reg) {
+    case 0: /* Basic Control */
+        return s->phy_control;
+    case 1: /* Basic Status */
+        return s->phy_status;
+    case 2: /* ID1 */
+        return 0x0007;
+    case 3: /* ID2 */
+        return 0xc0d1;
+    case 4: /* Auto-neg advertisment */
+        return s->phy_advertise;
+    case 5: /* Auto-neg Link Partner Ability */
+        return 0x0f71;
+    case 6: /* Auto-neg Expansion */
+        return 1;
+        /* TODO 17, 18, 27, 29, 30, 31 */
+    default:
+        BADF("PHY read reg %d\n", reg);
+        return 0;
+    }
+}
+
+static void do_phy_write(lan9118_state *s, int reg, uint32_t val)
+{
+    switch (reg) {
+    case 0: /* Basic Control */
+        if (val & 0x8000) {
+            phy_reset(s);
+            break;
+        }
+        s->phy_control = val & 0x7980;
+        /* Complete autonegotiation imediately.  */
+        if (val & 0x1000) {
+            s->phy_status |= 0x0020;
+        }
+        break;
+    case 4: /* Auto-neg advertisment */
+        s->phy_advertise = (val & 0x2d7f) | 0x80;
+        break;
+        /* TODO 17, 18, 27, 29, 30, 31 */
+    default:
+        BADF("PHY write reg %d = 0x%04x\n", reg, val);
+    }
+}
+
+static void do_mac_write(lan9118_state *s, int reg, uint32_t val)
+{
+    switch (reg) {
+    case MAC_CR:
+        if ((s->mac_cr & MAC_CR_RXEN) != 0 && (val & MAC_CR_RXEN) == 0) {
+            s->int_sts |= RXSTOP_INT;
+        }
+        s->mac_cr = val & ~MAC_CR_RESERVED;
+        DPRINTF("MAC_CR: %08x\n", val);
+        break;
+    case MAC_ADDRH:
+        s->conf.macaddr.a[4] = val & 0xff;
+        s->conf.macaddr.a[5] = (val >> 8) & 0xff;
+        lan9118_mac_changed(s);
+        break;
+    case MAC_ADDRL:
+        s->conf.macaddr.a[0] = val & 0xff;
+        s->conf.macaddr.a[1] = (val >> 8) & 0xff;
+        s->conf.macaddr.a[2] = (val >> 16) & 0xff;
+        s->conf.macaddr.a[3] = (val >> 24) & 0xff;
+        lan9118_mac_changed(s);
+        break;
+    case MAC_HASHH:
+        s->mac_hashh = val;
+        break;
+    case MAC_HASHL:
+        s->mac_hashl = val;
+        break;
+    case MAC_MII_ACC:
+        s->mac_mii_acc = val & 0xffc2;
+        if (val & 2) {
+            DPRINTF("PHY write %d = 0x%04x\n",
+                    (val >> 6) & 0x1f, s->mac_mii_data);
+            do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data);
+        } else {
+            s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f);
+            DPRINTF("PHY read %d = 0x%04x\n",
+                    (val >> 6) & 0x1f, s->mac_mii_data);
+        }
+        break;
+    case MAC_MII_DATA:
+        s->mac_mii_data = val & 0xffff;
+        break;
+    case MAC_FLOW:
+        s->mac_flow = val & 0xffff0000;
+        break;
+    default:
+        hw_error("lan9118: Unimplemented MAC register write: %d = 0x%x\n",
+                 s->mac_cmd & 0xf, val);
+    }
+}
+
+static uint32_t do_mac_read(lan9118_state *s, int reg)
+{
+    switch (reg) {
+    case MAC_CR:
+        return s->mac_cr;
+    case MAC_ADDRH:
+        return s->conf.macaddr.a[4] | (s->conf.macaddr.a[5] << 8);
+    case MAC_ADDRL:
+        return s->conf.macaddr.a[0] | (s->conf.macaddr.a[1] << 8)
+               | (s->conf.macaddr.a[2] << 16) | (s->conf.macaddr.a[3] << 24);
+    case MAC_HASHH:
+        return s->mac_hashh;
+        break;
+    case MAC_HASHL:
+        return s->mac_hashl;
+        break;
+    case MAC_MII_ACC:
+        return s->mac_mii_acc;
+    case MAC_MII_DATA:
+        return s->mac_mii_data;
+    case MAC_FLOW:
+        return s->mac_flow;
+    default:
+        hw_error("lan9118: Unimplemented MAC register read: %d\n",
+                 s->mac_cmd & 0xf);
+    }
+}
+
+static void lan9118_eeprom_cmd(lan9118_state *s, int cmd, int addr)
+{
+    s->e2p_cmd = (s->e2p_cmd & 0x10) | (cmd << 28) | addr;
+    switch (cmd) {
+    case 0:
+        s->e2p_data = s->eeprom[addr];
+        DPRINTF("EEPROM Read %d = 0x%02x\n", addr, s->e2p_data);
+        break;
+    case 1:
+        s->eeprom_writable = 0;
+        DPRINTF("EEPROM Write Disable\n");
+        break;
+    case 2: /* EWEN */
+        s->eeprom_writable = 1;
+        DPRINTF("EEPROM Write Enable\n");
+        break;
+    case 3: /* WRITE */
+        if (s->eeprom_writable) {
+            s->eeprom[addr] &= s->e2p_data;
+            DPRINTF("EEPROM Write %d = 0x%02x\n", addr, s->e2p_data);
+        } else {
+            DPRINTF("EEPROM Write %d (ignored)\n", addr);
+        }
+        break;
+    case 4: /* WRAL */
+        if (s->eeprom_writable) {
+            for (addr = 0; addr < 128; addr++) {
+                s->eeprom[addr] &= s->e2p_data;
+            }
+            DPRINTF("EEPROM Write All 0x%02x\n", s->e2p_data);
+        } else {
+            DPRINTF("EEPROM Write All (ignored)\n");
+        }
+    case 5: /* ERASE */
+        if (s->eeprom_writable) {
+            s->eeprom[addr] = 0xff;
+            DPRINTF("EEPROM Erase %d\n", addr);
+        } else {
+            DPRINTF("EEPROM Erase %d (ignored)\n", addr);
+        }
+        break;
+    case 6: /* ERAL */
+        if (s->eeprom_writable) {
+            memset(s->eeprom, 0xff, 128);
+            DPRINTF("EEPROM Erase All\n");
+        } else {
+            DPRINTF("EEPROM Erase All (ignored)\n");
+        }
+        break;
+    case 7: /* RELOAD */
+        lan9118_reload_eeprom(s);
+        break;
+    }
+}
+
+static void lan9118_writel(void *opaque, target_phys_addr_t offset,
+                           uint32_t val)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+    offset &= 0xff;
+    
+    //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
+    if (offset >= 0x20 && offset < 0x40) {
+        /* TX FIFO */
+        tx_fifo_push(s, val);
+        return;
+    }
+    switch (offset) {
+    case CSR_IRQ_CFG:
+        /* TODO: Implement interrupt deassertion intervals.  */
+        s->irq_cfg = (val & IRQ_EN);
+        break;
+    case CSR_INT_STS:
+        s->int_sts &= ~val;
+        break;
+    case CSR_INT_EN:
+        s->int_en = val & ~RESERVED_INT;
+        s->int_sts |= val & SW_INT;
+        break;
+    case CSR_FIFO_INT:
+        DPRINTF("FIFO INT levels %08x\n", val);
+        s->fifo_int = val;
+        break;
+    case CSR_RX_CFG:
+        if (val & 0x8000) {
+            /* RX_DUMP */
+            s->rx_fifo_used = 0;
+            s->rx_status_fifo_used = 0;
+            s->rx_packet_size_tail = s->rx_packet_size_head;
+            s->rx_packet_size[s->rx_packet_size_head] = 0;
+        }
+        s->rx_cfg = val & 0xcfff1ff0;
+        break;
+    case CSR_TX_CFG:
+        if (val & 0x8000) {
+            s->tx_status_fifo_used = 0;
+        }
+        if (val & 0x4000) {
+            s->txp->state = TX_IDLE;
+            s->txp->fifo_used = 0;
+            s->txp->cmd_a = 0xffffffff;
+        }
+        s->tx_cfg = val & 6;
+        break;
+    case CSR_HW_CFG:
+        if (val & 1) {
+            /* SRST */
+            lan9118_reset(&s->busdev.qdev);
+        } else {
+            s->hw_cfg = val & 0x003f300;
+        }
+        break;
+    case CSR_RX_DP_CTRL:
+        if (val & 0x80000000) {
+            /* Skip forward to next packet.  */
+            s->rxp_pad = 0;
+            s->rxp_offset = 0;
+            if (s->rxp_size == 0) {
+                /* Pop a word to start the next packet.  */
+                rx_fifo_pop(s);
+                s->rxp_pad = 0;
+                s->rxp_offset = 0;
+            }
+            s->rx_fifo_head += s->rxp_size;
+            if (s->rx_fifo_head >= s->rx_fifo_size) {
+                s->rx_fifo_head -= s->rx_fifo_size;
+            }
+        }
+        break;
+    case CSR_PMT_CTRL:
+        if (val & 0x400) {
+            phy_reset(s);
+        }
+        s->pmt_ctrl &= ~0x34e;
+        s->pmt_ctrl |= (val & 0x34e);
+        break;
+    case CSR_GPIO_CFG:
+        /* Probably just enabling LEDs.  */
+        s->gpio_cfg = val & 0x7777071f;
+        break;
+    case CSR_WORD_SWAP:
+        /* Ignored because we're in 32-bit mode.  */
+        s->word_swap = val;
+        break;
+    case CSR_MAC_CSR_CMD:
+        s->mac_cmd = val & 0x4000000f;
+        if (val & 0x80000000) {
+            if (val & 0x40000000) {
+                s->mac_data = do_mac_read(s, val & 0xf);
+                DPRINTF("MAC read %d = 0x%08x\n", val & 0xf, s->mac_data);
+            } else {
+                DPRINTF("MAC write %d = 0x%08x\n", val & 0xf, s->mac_data);
+                do_mac_write(s, val & 0xf, s->mac_data);
+            }
+        }
+        break;
+    case CSR_MAC_CSR_DATA:
+        s->mac_data = val;
+        break;
+    case CSR_AFC_CFG:
+        s->afc_cfg = val & 0x00ffffff;
+        break;
+    case CSR_E2P_CMD:
+        lan9118_eeprom_cmd(s, (val >> 28) & 7, val & 0xff);
+        break;
+    case CSR_E2P_DATA:
+        s->e2p_data = val & 0xff;
+        break;
+
+    default:
+        hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, val);
+        break;
+    }
+    lan9118_update(s);
+}
+
+static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
+{
+    lan9118_state *s = (lan9118_state *)opaque;
+
+    //DPRINTF("Read reg 0x%02x\n", (int)offset);
+    if (offset < 0x20) {
+        /* RX FIFO */
+        return rx_fifo_pop(s);
+    }
+    switch (offset) {
+    case 0x40:
+        return rx_status_fifo_pop(s);
+    case 0x44:
+        return s->rx_status_fifo[s->tx_status_fifo_head];
+    case 0x48:
+        return tx_status_fifo_pop(s);
+    case 0x4c:
+        return s->tx_status_fifo[s->tx_status_fifo_head];
+    case CSR_ID_REV:
+        return 0x01180001;
+    case CSR_IRQ_CFG:
+        return s->irq_cfg;
+    case CSR_INT_STS:
+        return s->int_sts;
+    case CSR_INT_EN:
+        return s->int_en;
+    case CSR_BYTE_TEST:
+        return 0x87654321;
+    case CSR_FIFO_INT:
+        return s->fifo_int;
+    case CSR_RX_CFG:
+        return s->rx_cfg;
+    case CSR_TX_CFG:
+        return s->tx_cfg;
+    case CSR_HW_CFG:
+        return s->hw_cfg | 0x4;
+    case CSR_RX_DP_CTRL:
+        return 0;
+    case CSR_RX_FIFO_INF:
+        return (s->rx_status_fifo_used << 16) | (s->rx_fifo_used << 2);
+    case CSR_TX_FIFO_INF:
+        return (s->tx_status_fifo_used << 16)
+               | (s->tx_fifo_size - s->txp->fifo_used);
+    case CSR_PMT_CTRL:
+        return s->pmt_ctrl;
+    case CSR_GPIO_CFG:
+        return s->gpio_cfg;
+    case CSR_WORD_SWAP:
+        return s->word_swap;
+    case CSR_FREE_RUN:
+        return (qemu_get_clock(vm_clock) / 40) - s->free_timer_start;
+    case CSR_RX_DROP:
+        /* TODO: Implement dropped frames counter.  */
+        return 0;
+    case CSR_MAC_CSR_CMD:
+        return s->mac_cmd;
+    case CSR_MAC_CSR_DATA:
+        return s->mac_data;
+    case CSR_AFC_CFG:
+        return s->afc_cfg;
+    case CSR_E2P_CMD:
+        return s->e2p_cmd;
+    case CSR_E2P_DATA:
+        return s->e2p_data;
+    }
+    hw_error("lan9118_read: Bad reg 0x%x\n", (int)offset);
+    return 0;
+}
+
+static CPUReadMemoryFunc * const lan9118_readfn[] = {
+    lan9118_readl,
+    lan9118_readl,
+    lan9118_readl
+};
+
+static CPUWriteMemoryFunc * const lan9118_writefn[] = {
+    lan9118_writel,
+    lan9118_writel,
+    lan9118_writel
+};
+
+static void lan9118_cleanup(VLANClientState *vc)
+{
+    lan9118_state *s = vc->opaque;
+
+    s->vc = NULL;
+}
+
+static int lan9118_init1(SysBusDevice *dev)
+{
+    lan9118_state *s = FROM_SYSBUS(lan9118_state, dev);
+    int i;
+
+    s->mmio_index = cpu_register_io_memory(lan9118_readfn,
+                                           lan9118_writefn, s);
+    sysbus_init_mmio(dev, 0x100, s->mmio_index);
+    sysbus_init_irq(dev, &s->irq);
+    qemu_macaddr_default_if_unset(&s->conf.macaddr);
+
+    s->vc = qemu_new_vlan_client(NET_CLIENT_TYPE_NIC,
+                                 s->conf.vlan, s->conf.peer,
+                                 dev->qdev.info->name, dev->qdev.id,
+                                 lan9118_can_receive, lan9118_receive, NULL,
+                                 NULL, lan9118_cleanup, s);
+    s->vc->link_status_changed = lan9118_set_link;
+    qemu_format_nic_info_str(s->vc, s->conf.macaddr.a);
+    s->eeprom[0] = 0xa5;
+    for (i = 0; i < 6; i++) {
+        s->eeprom[i + 1] = s->conf.macaddr.a[i];
+    }
+    s->pmt_ctrl = 1;
+    s->txp = &s->tx_packet;
+
+    /* ??? Save/restore.  */
+    return 0;
+}
+
+static SysBusDeviceInfo lan9118_info = {
+    .init = lan9118_init1,
+    .qdev.name  = "lan9118",
+    .qdev.size  = sizeof(lan9118_state),
+    .qdev.reset = lan9118_reset,
+    .qdev.props = (Property[]) {
+        DEFINE_NIC_PROPERTIES(lan9118_state, conf),
+        DEFINE_PROP_END_OF_LIST(),
+    }
+};
+
+static void lan9118_register_devices(void)
+{
+    sysbus_register_withprop(&lan9118_info);
+}
+
+/* Legacy helper function.  Should go away when machine config files are
+   implemented.  */
+void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq)
+{
+    DeviceState *dev;
+    SysBusDevice *s;
+
+    qemu_check_nic_model(nd, "lan9118");
+    dev = qdev_create(NULL, "lan9118");
+    qdev_set_nic_properties(dev, nd);
+    qdev_init_nofail(dev);
+    s = sysbus_from_qdev(dev);
+    sysbus_mmio_map(s, 0, base);
+    sysbus_connect_irq(s, 0, irq);
+}
+
+device_init(lan9118_register_devices)