ide: Add "model=s" qdev option

Allow the user to override the default disk model name "QEMU HARDDISK".

Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk-
model_serial addressing scheme when refering to partitions in /etc/fstab
and elsewhere. This causes problems when starting a disk image taken from
an existing physical server under qemu, because when running under qemu
name-of-disk-model is always "QEMU HARDDISK".

This patch introduces a model=s option which in combination with the
existing serial=s option can be used to fake the disk the operating
system was previously on, allowing the OS to boot properly.

Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

3 files changed, 29 insertions, 8 deletions

diff --git a/hw/ide/core.c b/hw/ide/core.c
index 771811c..e38cace 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -100,7 +100,7 @@ static void ide_identify(IDEState *s)
     put_le16(p + 21, 512); /* cache size in sectors */
     put_le16(p + 22, 4); /* ecc bytes */
     padstr((char *)(p + 23), s->version, 8); /* firmware version */
-    padstr((char *)(p + 27), "QEMU HARDDISK", 40); /* model */
+    padstr((char *)(p + 27), s->drive_model_str, 40); /* model */
 #if MAX_MULT_SECTORS > 1
     put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
 #endif
@@ -188,7 +188,7 @@ static void ide_atapi_identify(IDEState *s)
     put_le16(p + 21, 512); /* cache size in sectors */
     put_le16(p + 22, 4); /* ecc bytes */
     padstr((char *)(p + 23), s->version, 8); /* firmware version */
-    padstr((char *)(p + 27), "QEMU DVD-ROM", 40); /* model */
+    padstr((char *)(p + 27), s->drive_model_str, 40); /* model */
     put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */
 #ifdef USE_DMA_CDROM
     put_le16(p + 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */
@@ -245,7 +245,7 @@ static void ide_cfata_identify(IDEState *s)
     padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */
     put_le16(p + 22, 0x0004);			/* ECC bytes */
     padstr((char *) (p + 23), s->version, 8);	/* Firmware Revision */
-    padstr((char *) (p + 27), "QEMU MICRODRIVE", 40);/* Model number */
+    padstr((char *) (p + 27), s->drive_model_str, 40);/* Model number */
 #if MAX_MULT_SECTORS > 1
     put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
 #else
@@ -1833,7 +1833,7 @@ static const BlockDevOps ide_cd_block_ops = {
 };
 
 int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
-                   const char *version, const char *serial)
+                   const char *version, const char *serial, const char *model)
 {
     int cylinders, heads, secs;
     uint64_t nb_sectors;
@@ -1884,6 +1884,22 @@ int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
         snprintf(s->drive_serial_str, sizeof(s->drive_serial_str),
                  "QM%05d", s->drive_serial);
     }
+    if (model) {
+        pstrcpy(s->drive_model_str, sizeof(s->drive_model_str), model);
+    } else {
+        switch (kind) {
+        case IDE_CD:
+            strcpy(s->drive_model_str, "QEMU DVD-ROM");
+            break;
+        case IDE_CFATA:
+            strcpy(s->drive_model_str, "QEMU MICRODRIVE");
+            break;
+        default:
+            strcpy(s->drive_model_str, "QEMU HARDDISK");
+            break;
+        }
+    }
+
     if (version) {
         pstrcpy(s->version, sizeof(s->version), version);
     } else {
@@ -1976,7 +1992,8 @@ void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
         if (dinfo) {
             if (ide_init_drive(&bus->ifs[i], dinfo->bdrv,
                                dinfo->media_cd ? IDE_CD : IDE_HD, NULL,
-                               *dinfo->serial ? dinfo->serial : NULL) < 0) {
+                               *dinfo->serial ? dinfo->serial : NULL,
+                               NULL) < 0) {
                 error_report("Can't set up IDE drive %s", dinfo->id);
                 exit(1);
             }
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index c808a0d..b1319dc 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -348,6 +348,7 @@ struct IDEState {
     uint8_t identify_data[512];
     int drive_serial;
     char drive_serial_str[21];
+    char drive_model_str[41];
     /* ide regs */
     uint8_t feature;
     uint8_t error;
@@ -468,6 +469,7 @@ struct IDEDevice {
     BlockConf conf;
     char *version;
     char *serial;
+    char *model;
 };
 
 #define BM_STATUS_DMAING 0x01
@@ -534,7 +536,7 @@ void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 uint32_t ide_data_readl(void *opaque, uint32_t addr);
 
 int ide_init_drive(IDEState *s, BlockDriverState *bs, IDEDriveKind kind,
-                   const char *version, const char *serial);
+                   const char *version, const char *serial, const char *model);
 void ide_init2(IDEBus *bus, qemu_irq irq);
 void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
                                     DriveInfo *hd1, qemu_irq irq);
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index f6a4896..07227c7 100644
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -136,7 +136,8 @@ static int ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind)
         }
     }
 
-    if (ide_init_drive(s, dev->conf.bs, kind, dev->version, serial) < 0) {
+    if (ide_init_drive(s, dev->conf.bs, kind,
+                       dev->version, serial, dev->model) < 0) {
         return -1;
     }
 
@@ -173,7 +174,8 @@ static int ide_drive_initfn(IDEDevice *dev)
 #define DEFINE_IDE_DEV_PROPERTIES()                     \
     DEFINE_BLOCK_PROPERTIES(IDEDrive, dev.conf),        \
     DEFINE_PROP_STRING("ver",  IDEDrive, dev.version),  \
-    DEFINE_PROP_STRING("serial",  IDEDrive, dev.serial)
+    DEFINE_PROP_STRING("serial",  IDEDrive, dev.serial),\
+    DEFINE_PROP_STRING("model", IDEDrive, dev.model)
 
 static Property ide_hd_properties[] = {
     DEFINE_IDE_DEV_PROPERTIES(),