vfio/pci: Move AMD device specific reset to quirks

This is just another quirk, for reset rather than affecting memory
regions.  Move it to our new quirks file.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

1 files changed, 168 insertions, 0 deletions

diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
index c70c004..9b51a64 100644
--- a/hw/vfio/pci-quirks.c
+++ b/hw/vfio/pci-quirks.c
@@ -1046,3 +1046,171 @@ void vfio_bar_quirk_free(VFIOPCIDevice *vdev, int nr)
         g_free(quirk);
     }
 }
+
+/*
+ * Reset quirks
+ */
+
+/*
+ * AMD Radeon PCI config reset, based on Linux:
+ *   drivers/gpu/drm/radeon/ci_smc.c:ci_is_smc_running()
+ *   drivers/gpu/drm/radeon/radeon_device.c:radeon_pci_config_reset
+ *   drivers/gpu/drm/radeon/ci_smc.c:ci_reset_smc()
+ *   drivers/gpu/drm/radeon/ci_smc.c:ci_stop_smc_clock()
+ * IDs: include/drm/drm_pciids.h
+ * Registers: http://cgit.freedesktop.org/~agd5f/linux/commit/?id=4e2aa447f6f0
+ *
+ * Bonaire and Hawaii GPUs do not respond to a bus reset.  This is a bug in the
+ * hardware that should be fixed on future ASICs.  The symptom of this is that
+ * once the accerlated driver loads, Windows guests will bsod on subsequent
+ * attmpts to load the driver, such as after VM reset or shutdown/restart.  To
+ * work around this, we do an AMD specific PCI config reset, followed by an SMC
+ * reset.  The PCI config reset only works if SMC firmware is running, so we
+ * have a dependency on the state of the device as to whether this reset will
+ * be effective.  There are still cases where we won't be able to kick the
+ * device into working, but this greatly improves the usability overall.  The
+ * config reset magic is relatively common on AMD GPUs, but the setup and SMC
+ * poking is largely ASIC specific.
+ */
+static bool vfio_radeon_smc_is_running(VFIOPCIDevice *vdev)
+{
+    uint32_t clk, pc_c;
+
+    /*
+     * Registers 200h and 204h are index and data registers for accessing
+     * indirect configuration registers within the device.
+     */
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
+    clk = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000370, 4);
+    pc_c = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+
+    return (!(clk & 1) && (0x20100 <= pc_c));
+}
+
+/*
+ * The scope of a config reset is controlled by a mode bit in the misc register
+ * and a fuse, exposed as a bit in another register.  The fuse is the default
+ * (0 = GFX, 1 = whole GPU), the misc bit is a toggle, with the forumula
+ * scope = !(misc ^ fuse), where the resulting scope is defined the same as
+ * the fuse.  A truth table therefore tells us that if misc == fuse, we need
+ * to flip the value of the bit in the misc register.
+ */
+static void vfio_radeon_set_gfx_only_reset(VFIOPCIDevice *vdev)
+{
+    uint32_t misc, fuse;
+    bool a, b;
+
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0xc00c0000, 4);
+    fuse = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+    b = fuse & 64;
+
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0xc0000010, 4);
+    misc = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+    a = misc & 2;
+
+    if (a == b) {
+        vfio_region_write(&vdev->bars[5].region, 0x204, misc ^ 2, 4);
+        vfio_region_read(&vdev->bars[5].region, 0x204, 4); /* flush */
+    }
+}
+
+static int vfio_radeon_reset(VFIOPCIDevice *vdev)
+{
+    PCIDevice *pdev = &vdev->pdev;
+    int i, ret = 0;
+    uint32_t data;
+
+    /* Defer to a kernel implemented reset */
+    if (vdev->vbasedev.reset_works) {
+        trace_vfio_quirk_ati_bonaire_reset_skipped(vdev->vbasedev.name);
+        return -ENODEV;
+    }
+
+    /* Enable only memory BAR access */
+    vfio_pci_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MEMORY, 2);
+
+    /* Reset only works if SMC firmware is loaded and running */
+    if (!vfio_radeon_smc_is_running(vdev)) {
+        ret = -EINVAL;
+        trace_vfio_quirk_ati_bonaire_reset_no_smc(vdev->vbasedev.name);
+        goto out;
+    }
+
+    /* Make sure only the GFX function is reset */
+    vfio_radeon_set_gfx_only_reset(vdev);
+
+    /* AMD PCI config reset */
+    vfio_pci_write_config(pdev, 0x7c, 0x39d5e86b, 4);
+    usleep(100);
+
+    /* Read back the memory size to make sure we're out of reset */
+    for (i = 0; i < 100000; i++) {
+        if (vfio_region_read(&vdev->bars[5].region, 0x5428, 4) != 0xffffffff) {
+            goto reset_smc;
+        }
+        usleep(1);
+    }
+
+    trace_vfio_quirk_ati_bonaire_reset_timeout(vdev->vbasedev.name);
+
+reset_smc:
+    /* Reset SMC */
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000000, 4);
+    data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+    data |= 1;
+    vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);
+
+    /* Disable SMC clock */
+    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
+    data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
+    data |= 1;
+    vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);
+
+    trace_vfio_quirk_ati_bonaire_reset_done(vdev->vbasedev.name);
+
+out:
+    /* Restore PCI command register */
+    vfio_pci_write_config(pdev, PCI_COMMAND, 0, 2);
+
+    return ret;
+}
+
+void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
+{
+    PCIDevice *pdev = &vdev->pdev;
+    uint16_t vendor, device;
+
+    vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
+    device = pci_get_word(pdev->config + PCI_DEVICE_ID);
+
+    switch (vendor) {
+    case 0x1002:
+        switch (device) {
+        /* Bonaire */
+        case 0x6649: /* Bonaire [FirePro W5100] */
+        case 0x6650:
+        case 0x6651:
+        case 0x6658: /* Bonaire XTX [Radeon R7 260X] */
+        case 0x665c: /* Bonaire XT [Radeon HD 7790/8770 / R9 260 OEM] */
+        case 0x665d: /* Bonaire [Radeon R7 200 Series] */
+        /* Hawaii */
+        case 0x67A0: /* Hawaii XT GL [FirePro W9100] */
+        case 0x67A1: /* Hawaii PRO GL [FirePro W8100] */
+        case 0x67A2:
+        case 0x67A8:
+        case 0x67A9:
+        case 0x67AA:
+        case 0x67B0: /* Hawaii XT [Radeon R9 290X] */
+        case 0x67B1: /* Hawaii PRO [Radeon R9 290] */
+        case 0x67B8:
+        case 0x67B9:
+        case 0x67BA:
+        case 0x67BE:
+            vdev->resetfn = vfio_radeon_reset;
+            trace_vfio_quirk_ati_bonaire_reset(vdev->vbasedev.name);
+            break;
+        }
+        break;
+    }
+}