hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 1138 deletions

diff --git a/hw/spitz.c b/hw/spitz.c
deleted file mode 100644
index f5832be..0000000
--- a/hw/spitz.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-/*
- * PXA270-based Clamshell PDA platforms.
- *
- * Copyright (c) 2006 Openedhand Ltd.
- * Written by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "hw/hw.h"
-#include "hw/pxa.h"
-#include "hw/arm-misc.h"
-#include "sysemu/sysemu.h"
-#include "hw/pcmcia.h"
-#include "hw/i2c.h"
-#include "hw/ssi.h"
-#include "hw/flash.h"
-#include "qemu/timer.h"
-#include "hw/devices.h"
-#include "hw/sharpsl.h"
-#include "ui/console.h"
-#include "block/block.h"
-#include "audio/audio.h"
-#include "hw/boards.h"
-#include "sysemu/blockdev.h"
-#include "hw/sysbus.h"
-#include "exec/address-spaces.h"
-
-#undef REG_FMT
-#define REG_FMT			"0x%02lx"
-
-/* Spitz Flash */
-#define FLASH_BASE		0x0c000000
-#define FLASH_ECCLPLB		0x00	/* Line parity 7 - 0 bit */
-#define FLASH_ECCLPUB		0x04	/* Line parity 15 - 8 bit */
-#define FLASH_ECCCP		0x08	/* Column parity 5 - 0 bit */
-#define FLASH_ECCCNTR		0x0c	/* ECC byte counter */
-#define FLASH_ECCCLRR		0x10	/* Clear ECC */
-#define FLASH_FLASHIO		0x14	/* Flash I/O */
-#define FLASH_FLASHCTL		0x18	/* Flash Control */
-
-#define FLASHCTL_CE0		(1 << 0)
-#define FLASHCTL_CLE		(1 << 1)
-#define FLASHCTL_ALE		(1 << 2)
-#define FLASHCTL_WP		(1 << 3)
-#define FLASHCTL_CE1		(1 << 4)
-#define FLASHCTL_RYBY		(1 << 5)
-#define FLASHCTL_NCE		(FLASHCTL_CE0 | FLASHCTL_CE1)
-
-typedef struct {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    DeviceState *nand;
-    uint8_t ctl;
-    uint8_t manf_id;
-    uint8_t chip_id;
-    ECCState ecc;
-} SLNANDState;
-
-static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size)
-{
-    SLNANDState *s = (SLNANDState *) opaque;
-    int ryby;
-
-    switch (addr) {
-#define BSHR(byte, from, to)	((s->ecc.lp[byte] >> (from - to)) & (1 << to))
-    case FLASH_ECCLPLB:
-        return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |
-                BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);
-
-#define BSHL(byte, from, to)	((s->ecc.lp[byte] << (to - from)) & (1 << to))
-    case FLASH_ECCLPUB:
-        return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |
-                BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);
-
-    case FLASH_ECCCP:
-        return s->ecc.cp;
-
-    case FLASH_ECCCNTR:
-        return s->ecc.count & 0xff;
-
-    case FLASH_FLASHCTL:
-        nand_getpins(s->nand, &ryby);
-        if (ryby)
-            return s->ctl | FLASHCTL_RYBY;
-        else
-            return s->ctl;
-
-    case FLASH_FLASHIO:
-        if (size == 4) {
-            return ecc_digest(&s->ecc, nand_getio(s->nand)) |
-                (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);
-        }
-        return ecc_digest(&s->ecc, nand_getio(s->nand));
-
-    default:
-        zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
-    }
-    return 0;
-}
-
-static void sl_write(void *opaque, hwaddr addr,
-                     uint64_t value, unsigned size)
-{
-    SLNANDState *s = (SLNANDState *) opaque;
-
-    switch (addr) {
-    case FLASH_ECCCLRR:
-        /* Value is ignored.  */
-        ecc_reset(&s->ecc);
-        break;
-
-    case FLASH_FLASHCTL:
-        s->ctl = value & 0xff & ~FLASHCTL_RYBY;
-        nand_setpins(s->nand,
-                        s->ctl & FLASHCTL_CLE,
-                        s->ctl & FLASHCTL_ALE,
-                        s->ctl & FLASHCTL_NCE,
-                        s->ctl & FLASHCTL_WP,
-                        0);
-        break;
-
-    case FLASH_FLASHIO:
-        nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff));
-        break;
-
-    default:
-        zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
-    }
-}
-
-enum {
-    FLASH_128M,
-    FLASH_1024M,
-};
-
-static const MemoryRegionOps sl_ops = {
-    .read = sl_read,
-    .write = sl_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static void sl_flash_register(PXA2xxState *cpu, int size)
-{
-    DeviceState *dev;
-
-    dev = qdev_create(NULL, "sl-nand");
-
-    qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG);
-    if (size == FLASH_128M)
-        qdev_prop_set_uint8(dev, "chip_id", 0x73);
-    else if (size == FLASH_1024M)
-        qdev_prop_set_uint8(dev, "chip_id", 0xf1);
-
-    qdev_init_nofail(dev);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE);
-}
-
-static int sl_nand_init(SysBusDevice *dev) {
-    SLNANDState *s;
-    DriveInfo *nand;
-
-    s = FROM_SYSBUS(SLNANDState, dev);
-
-    s->ctl = 0;
-    nand = drive_get(IF_MTD, 0, 0);
-    s->nand = nand_init(nand ? nand->bdrv : NULL, s->manf_id, s->chip_id);
-
-    memory_region_init_io(&s->iomem, &sl_ops, s, "sl", 0x40);
-    sysbus_init_mmio(dev, &s->iomem);
-
-    return 0;
-}
-
-/* Spitz Keyboard */
-
-#define SPITZ_KEY_STROBE_NUM	11
-#define SPITZ_KEY_SENSE_NUM	7
-
-static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {
-    12, 17, 91, 34, 36, 38, 39
-};
-
-static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = {
-    88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114
-};
-
-/* Eighth additional row maps the special keys */
-static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = {
-    { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },
-    {  -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },
-    { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25,  -1 ,  -1 ,  -1  },
-    { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26,  -1 , 0x36,  -1  },
-    { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34,  -1 , 0x1c, 0x2a,  -1  },
-    { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33,  -1 , 0x48,  -1 ,  -1 , 0x38 },
-    { 0x37, 0x3d,  -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d,  -1 ,  -1  },
-    { 0x52, 0x43, 0x01, 0x47, 0x49,  -1 ,  -1 ,  -1 ,  -1 ,  -1 ,  -1  },
-};
-
-#define SPITZ_GPIO_AK_INT	13	/* Remote control */
-#define SPITZ_GPIO_SYNC		16	/* Sync button */
-#define SPITZ_GPIO_ON_KEY	95	/* Power button */
-#define SPITZ_GPIO_SWA		97	/* Lid */
-#define SPITZ_GPIO_SWB		96	/* Tablet mode */
-
-/* The special buttons are mapped to unused keys */
-static const int spitz_gpiomap[5] = {
-    SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY,
-    SPITZ_GPIO_SWA, SPITZ_GPIO_SWB,
-};
-
-typedef struct {
-    SysBusDevice busdev;
-    qemu_irq sense[SPITZ_KEY_SENSE_NUM];
-    qemu_irq gpiomap[5];
-    int keymap[0x80];
-    uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
-    uint16_t strobe_state;
-    uint16_t sense_state;
-
-    uint16_t pre_map[0x100];
-    uint16_t modifiers;
-    uint16_t imodifiers;
-    uint8_t fifo[16];
-    int fifopos, fifolen;
-    QEMUTimer *kbdtimer;
-} SpitzKeyboardState;
-
-static void spitz_keyboard_sense_update(SpitzKeyboardState *s)
-{
-    int i;
-    uint16_t strobe, sense = 0;
-    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) {
-        strobe = s->keyrow[i] & s->strobe_state;
-        if (strobe) {
-            sense |= 1 << i;
-            if (!(s->sense_state & (1 << i)))
-                qemu_irq_raise(s->sense[i]);
-        } else if (s->sense_state & (1 << i))
-            qemu_irq_lower(s->sense[i]);
-    }
-
-    s->sense_state = sense;
-}
-
-static void spitz_keyboard_strobe(void *opaque, int line, int level)
-{
-    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
-
-    if (level)
-        s->strobe_state |= 1 << line;
-    else
-        s->strobe_state &= ~(1 << line);
-    spitz_keyboard_sense_update(s);
-}
-
-static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode)
-{
-    int spitz_keycode = s->keymap[keycode & 0x7f];
-    if (spitz_keycode == -1)
-        return;
-
-    /* Handle the additional keys */
-    if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
-        qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80));
-        return;
-    }
-
-    if (keycode & 0x80)
-        s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf));
-    else
-        s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf);
-
-    spitz_keyboard_sense_update(s);
-}
-
-#define SHIFT	(1 << 7)
-#define CTRL	(1 << 8)
-#define FN	(1 << 9)
-
-#define QUEUE_KEY(c)	s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
-
-static void spitz_keyboard_handler(void *opaque, int keycode)
-{
-    SpitzKeyboardState *s = opaque;
-    uint16_t code;
-    int mapcode;
-    switch (keycode) {
-    case 0x2a:	/* Left Shift */
-        s->modifiers |= 1;
-        break;
-    case 0xaa:
-        s->modifiers &= ~1;
-        break;
-    case 0x36:	/* Right Shift */
-        s->modifiers |= 2;
-        break;
-    case 0xb6:
-        s->modifiers &= ~2;
-        break;
-    case 0x1d:	/* Control */
-        s->modifiers |= 4;
-        break;
-    case 0x9d:
-        s->modifiers &= ~4;
-        break;
-    case 0x38:	/* Alt */
-        s->modifiers |= 8;
-        break;
-    case 0xb8:
-        s->modifiers &= ~8;
-        break;
-    }
-
-    code = s->pre_map[mapcode = ((s->modifiers & 3) ?
-            (keycode | SHIFT) :
-            (keycode & ~SHIFT))];
-
-    if (code != mapcode) {
-#if 0
-        if ((code & SHIFT) && !(s->modifiers & 1))
-            QUEUE_KEY(0x2a | (keycode & 0x80));
-        if ((code & CTRL ) && !(s->modifiers & 4))
-            QUEUE_KEY(0x1d | (keycode & 0x80));
-        if ((code & FN   ) && !(s->modifiers & 8))
-            QUEUE_KEY(0x38 | (keycode & 0x80));
-        if ((code & FN   ) && (s->modifiers & 1))
-            QUEUE_KEY(0x2a | (~keycode & 0x80));
-        if ((code & FN   ) && (s->modifiers & 2))
-            QUEUE_KEY(0x36 | (~keycode & 0x80));
-#else
-        if (keycode & 0x80) {
-            if ((s->imodifiers & 1   ) && !(s->modifiers & 1))
-                QUEUE_KEY(0x2a | 0x80);
-            if ((s->imodifiers & 4   ) && !(s->modifiers & 4))
-                QUEUE_KEY(0x1d | 0x80);
-            if ((s->imodifiers & 8   ) && !(s->modifiers & 8))
-                QUEUE_KEY(0x38 | 0x80);
-            if ((s->imodifiers & 0x10) && (s->modifiers & 1))
-                QUEUE_KEY(0x2a);
-            if ((s->imodifiers & 0x20) && (s->modifiers & 2))
-                QUEUE_KEY(0x36);
-            s->imodifiers = 0;
-        } else {
-            if ((code & SHIFT) && !((s->modifiers | s->imodifiers) & 1)) {
-                QUEUE_KEY(0x2a);
-                s->imodifiers |= 1;
-            }
-            if ((code & CTRL ) && !((s->modifiers | s->imodifiers) & 4)) {
-                QUEUE_KEY(0x1d);
-                s->imodifiers |= 4;
-            }
-            if ((code & FN   ) && !((s->modifiers | s->imodifiers) & 8)) {
-                QUEUE_KEY(0x38);
-                s->imodifiers |= 8;
-            }
-            if ((code & FN   ) && (s->modifiers & 1) &&
-                            !(s->imodifiers & 0x10)) {
-                QUEUE_KEY(0x2a | 0x80);
-                s->imodifiers |= 0x10;
-            }
-            if ((code & FN   ) && (s->modifiers & 2) &&
-                            !(s->imodifiers & 0x20)) {
-                QUEUE_KEY(0x36 | 0x80);
-                s->imodifiers |= 0x20;
-            }
-        }
-#endif
-    }
-
-    QUEUE_KEY((code & 0x7f) | (keycode & 0x80));
-}
-
-static void spitz_keyboard_tick(void *opaque)
-{
-    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
-
-    if (s->fifolen) {
-        spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]);
-        s->fifolen --;
-        if (s->fifopos >= 16)
-            s->fifopos = 0;
-    }
-
-    qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock) +
-                   get_ticks_per_sec() / 32);
-}
-
-static void spitz_keyboard_pre_map(SpitzKeyboardState *s)
-{
-    int i;
-    for (i = 0; i < 0x100; i ++)
-        s->pre_map[i] = i;
-    s->pre_map[0x02 | SHIFT	] = 0x02 | SHIFT;	/* exclam */
-    s->pre_map[0x28 | SHIFT	] = 0x03 | SHIFT;	/* quotedbl */
-    s->pre_map[0x04 | SHIFT	] = 0x04 | SHIFT;	/* numbersign */
-    s->pre_map[0x05 | SHIFT	] = 0x05 | SHIFT;	/* dollar */
-    s->pre_map[0x06 | SHIFT	] = 0x06 | SHIFT;	/* percent */
-    s->pre_map[0x08 | SHIFT	] = 0x07 | SHIFT;	/* ampersand */
-    s->pre_map[0x28		] = 0x08 | SHIFT;	/* apostrophe */
-    s->pre_map[0x0a | SHIFT	] = 0x09 | SHIFT;	/* parenleft */
-    s->pre_map[0x0b | SHIFT	] = 0x0a | SHIFT;	/* parenright */
-    s->pre_map[0x29 | SHIFT	] = 0x0b | SHIFT;	/* asciitilde */
-    s->pre_map[0x03 | SHIFT	] = 0x0c | SHIFT;	/* at */
-    s->pre_map[0xd3		] = 0x0e | FN;		/* Delete */
-    s->pre_map[0x3a		] = 0x0f | FN;		/* Caps_Lock */
-    s->pre_map[0x07 | SHIFT	] = 0x11 | FN;		/* asciicircum */
-    s->pre_map[0x0d		] = 0x12 | FN;		/* equal */
-    s->pre_map[0x0d | SHIFT	] = 0x13 | FN;		/* plus */
-    s->pre_map[0x1a		] = 0x14 | FN;		/* bracketleft */
-    s->pre_map[0x1b		] = 0x15 | FN;		/* bracketright */
-    s->pre_map[0x1a | SHIFT	] = 0x16 | FN;		/* braceleft */
-    s->pre_map[0x1b | SHIFT	] = 0x17 | FN;		/* braceright */
-    s->pre_map[0x27		] = 0x22 | FN;		/* semicolon */
-    s->pre_map[0x27 | SHIFT	] = 0x23 | FN;		/* colon */
-    s->pre_map[0x09 | SHIFT	] = 0x24 | FN;		/* asterisk */
-    s->pre_map[0x2b		] = 0x25 | FN;		/* backslash */
-    s->pre_map[0x2b | SHIFT	] = 0x26 | FN;		/* bar */
-    s->pre_map[0x0c | SHIFT	] = 0x30 | FN;		/* underscore */
-    s->pre_map[0x33 | SHIFT	] = 0x33 | FN;		/* less */
-    s->pre_map[0x35		] = 0x33 | SHIFT;	/* slash */
-    s->pre_map[0x34 | SHIFT	] = 0x34 | FN;		/* greater */
-    s->pre_map[0x35 | SHIFT	] = 0x34 | SHIFT;	/* question */
-    s->pre_map[0x49		] = 0x48 | FN;		/* Page_Up */
-    s->pre_map[0x51		] = 0x50 | FN;		/* Page_Down */
-
-    s->modifiers = 0;
-    s->imodifiers = 0;
-    s->fifopos = 0;
-    s->fifolen = 0;
-}
-
-#undef SHIFT
-#undef CTRL
-#undef FN
-
-static int spitz_keyboard_post_load(void *opaque, int version_id)
-{
-    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
-
-    /* Release all pressed keys */
-    memset(s->keyrow, 0, sizeof(s->keyrow));
-    spitz_keyboard_sense_update(s);
-    s->modifiers = 0;
-    s->imodifiers = 0;
-    s->fifopos = 0;
-    s->fifolen = 0;
-
-    return 0;
-}
-
-static void spitz_keyboard_register(PXA2xxState *cpu)
-{
-    int i;
-    DeviceState *dev;
-    SpitzKeyboardState *s;
-
-    dev = sysbus_create_simple("spitz-keyboard", -1, NULL);
-    s = FROM_SYSBUS(SpitzKeyboardState, SYS_BUS_DEVICE(dev));
-
-    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)
-        qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i]));
-
-    for (i = 0; i < 5; i ++)
-        s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]);
-
-    if (!graphic_rotate)
-        s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]);
-
-    for (i = 0; i < 5; i++)
-        qemu_set_irq(s->gpiomap[i], 0);
-
-    for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
-        qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i],
-                qdev_get_gpio_in(dev, i));
-
-    qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock));
-
-    qemu_add_kbd_event_handler(spitz_keyboard_handler, s);
-}
-
-static int spitz_keyboard_init(SysBusDevice *dev)
-{
-    SpitzKeyboardState *s;
-    int i, j;
-
-    s = FROM_SYSBUS(SpitzKeyboardState, dev);
-
-    for (i = 0; i < 0x80; i ++)
-        s->keymap[i] = -1;
-    for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++)
-        for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++)
-            if (spitz_keymap[i][j] != -1)
-                s->keymap[spitz_keymap[i][j]] = (i << 4) | j;
-
-    spitz_keyboard_pre_map(s);
-
-    s->kbdtimer = qemu_new_timer_ns(vm_clock, spitz_keyboard_tick, s);
-    qdev_init_gpio_in(&dev->qdev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM);
-    qdev_init_gpio_out(&dev->qdev, s->sense, SPITZ_KEY_SENSE_NUM);
-
-    return 0;
-}
-
-/* LCD backlight controller */
-
-#define LCDTG_RESCTL	0x00
-#define LCDTG_PHACTRL	0x01
-#define LCDTG_DUTYCTRL	0x02
-#define LCDTG_POWERREG0	0x03
-#define LCDTG_POWERREG1	0x04
-#define LCDTG_GPOR3	0x05
-#define LCDTG_PICTRL	0x06
-#define LCDTG_POLCTRL	0x07
-
-typedef struct {
-    SSISlave ssidev;
-    uint32_t bl_intensity;
-    uint32_t bl_power;
-} SpitzLCDTG;
-
-static void spitz_bl_update(SpitzLCDTG *s)
-{
-    if (s->bl_power && s->bl_intensity)
-        zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity);
-    else
-        zaurus_printf("LCD Backlight now off\n");
-}
-
-/* FIXME: Implement GPIO properly and remove this hack.  */
-static SpitzLCDTG *spitz_lcdtg;
-
-static inline void spitz_bl_bit5(void *opaque, int line, int level)
-{
-    SpitzLCDTG *s = spitz_lcdtg;
-    int prev = s->bl_intensity;
-
-    if (level)
-        s->bl_intensity &= ~0x20;
-    else
-        s->bl_intensity |= 0x20;
-
-    if (s->bl_power && prev != s->bl_intensity)
-        spitz_bl_update(s);
-}
-
-static inline void spitz_bl_power(void *opaque, int line, int level)
-{
-    SpitzLCDTG *s = spitz_lcdtg;
-    s->bl_power = !!level;
-    spitz_bl_update(s);
-}
-
-static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value)
-{
-    SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);
-    int addr;
-    addr = value >> 5;
-    value &= 0x1f;
-
-    switch (addr) {
-    case LCDTG_RESCTL:
-        if (value)
-            zaurus_printf("LCD in QVGA mode\n");
-        else
-            zaurus_printf("LCD in VGA mode\n");
-        break;
-
-    case LCDTG_DUTYCTRL:
-        s->bl_intensity &= ~0x1f;
-        s->bl_intensity |= value;
-        if (s->bl_power)
-            spitz_bl_update(s);
-        break;
-
-    case LCDTG_POWERREG0:
-        /* Set common voltage to M62332FP */
-        break;
-    }
-    return 0;
-}
-
-static int spitz_lcdtg_init(SSISlave *dev)
-{
-    SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);
-
-    spitz_lcdtg = s;
-    s->bl_power = 0;
-    s->bl_intensity = 0x20;
-
-    return 0;
-}
-
-/* SSP devices */
-
-#define CORGI_SSP_PORT		2
-
-#define SPITZ_GPIO_LCDCON_CS	53
-#define SPITZ_GPIO_ADS7846_CS	14
-#define SPITZ_GPIO_MAX1111_CS	20
-#define SPITZ_GPIO_TP_INT	11
-
-static DeviceState *max1111;
-
-/* "Demux" the signal based on current chipselect */
-typedef struct {
-    SSISlave ssidev;
-    SSIBus *bus[3];
-    uint32_t enable[3];
-} CorgiSSPState;
-
-static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value)
-{
-    CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);
-    int i;
-
-    for (i = 0; i < 3; i++) {
-        if (s->enable[i]) {
-            return ssi_transfer(s->bus[i], value);
-        }
-    }
-    return 0;
-}
-
-static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
-{
-    CorgiSSPState *s = (CorgiSSPState *)opaque;
-    assert(line >= 0 && line < 3);
-    s->enable[line] = !level;
-}
-
-#define MAX1111_BATT_VOLT	1
-#define MAX1111_BATT_TEMP	2
-#define MAX1111_ACIN_VOLT	3
-
-#define SPITZ_BATTERY_TEMP	0xe0	/* About 2.9V */
-#define SPITZ_BATTERY_VOLT	0xd0	/* About 4.0V */
-#define SPITZ_CHARGEON_ACIN	0x80	/* About 5.0V */
-
-static void spitz_adc_temp_on(void *opaque, int line, int level)
-{
-    if (!max1111)
-        return;
-
-    if (level)
-        max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP);
-    else
-        max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
-}
-
-static int corgi_ssp_init(SSISlave *dev)
-{
-    CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);
-
-    qdev_init_gpio_in(&dev->qdev, corgi_ssp_gpio_cs, 3);
-    s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0");
-    s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1");
-    s->bus[2] = ssi_create_bus(&dev->qdev, "ssi2");
-
-    return 0;
-}
-
-static void spitz_ssp_attach(PXA2xxState *cpu)
-{
-    DeviceState *mux;
-    DeviceState *dev;
-    void *bus;
-
-    mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp");
-
-    bus = qdev_get_child_bus(mux, "ssi0");
-    ssi_create_slave(bus, "spitz-lcdtg");
-
-    bus = qdev_get_child_bus(mux, "ssi1");
-    dev = ssi_create_slave(bus, "ads7846");
-    qdev_connect_gpio_out(dev, 0,
-                          qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT));
-
-    bus = qdev_get_child_bus(mux, "ssi2");
-    max1111 = ssi_create_slave(bus, "max1111");
-    max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);
-    max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
-    max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN);
-
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS,
-                        qdev_get_gpio_in(mux, 0));
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS,
-                        qdev_get_gpio_in(mux, 1));
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS,
-                        qdev_get_gpio_in(mux, 2));
-}
-
-/* CF Microdrive */
-
-static void spitz_microdrive_attach(PXA2xxState *cpu, int slot)
-{
-    PCMCIACardState *md;
-    DriveInfo *dinfo;
-
-    dinfo = drive_get(IF_IDE, 0, 0);
-    if (!dinfo || dinfo->media_cd)
-        return;
-    md = dscm1xxxx_init(dinfo);
-    pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);
-}
-
-/* Wm8750 and Max7310 on I2C */
-
-#define AKITA_MAX_ADDR	0x18
-#define SPITZ_WM_ADDRL	0x1b
-#define SPITZ_WM_ADDRH	0x1a
-
-#define SPITZ_GPIO_WM	5
-
-static void spitz_wm8750_addr(void *opaque, int line, int level)
-{
-    I2CSlave *wm = (I2CSlave *) opaque;
-    if (level)
-        i2c_set_slave_address(wm, SPITZ_WM_ADDRH);
-    else
-        i2c_set_slave_address(wm, SPITZ_WM_ADDRL);
-}
-
-static void spitz_i2c_setup(PXA2xxState *cpu)
-{
-    /* Attach the CPU on one end of our I2C bus.  */
-    i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
-
-    DeviceState *wm;
-
-    /* Attach a WM8750 to the bus */
-    wm = i2c_create_slave(bus, "wm8750", 0);
-
-    spitz_wm8750_addr(wm, 0, 0);
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,
-                    qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]);
-    /* .. and to the sound interface.  */
-    cpu->i2s->opaque = wm;
-    cpu->i2s->codec_out = wm8750_dac_dat;
-    cpu->i2s->codec_in = wm8750_adc_dat;
-    wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
-}
-
-static void spitz_akita_i2c_setup(PXA2xxState *cpu)
-{
-    /* Attach a Max7310 to Akita I2C bus.  */
-    i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
-                     AKITA_MAX_ADDR);
-}
-
-/* Other peripherals */
-
-static void spitz_out_switch(void *opaque, int line, int level)
-{
-    switch (line) {
-    case 0:
-        zaurus_printf("Charging %s.\n", level ? "off" : "on");
-        break;
-    case 1:
-        zaurus_printf("Discharging %s.\n", level ? "on" : "off");
-        break;
-    case 2:
-        zaurus_printf("Green LED %s.\n", level ? "on" : "off");
-        break;
-    case 3:
-        zaurus_printf("Orange LED %s.\n", level ? "on" : "off");
-        break;
-    case 4:
-        spitz_bl_bit5(opaque, line, level);
-        break;
-    case 5:
-        spitz_bl_power(opaque, line, level);
-        break;
-    case 6:
-        spitz_adc_temp_on(opaque, line, level);
-        break;
-    }
-}
-
-#define SPITZ_SCP_LED_GREEN		1
-#define SPITZ_SCP_JK_B			2
-#define SPITZ_SCP_CHRG_ON		3
-#define SPITZ_SCP_MUTE_L		4
-#define SPITZ_SCP_MUTE_R		5
-#define SPITZ_SCP_CF_POWER		6
-#define SPITZ_SCP_LED_ORANGE		7
-#define SPITZ_SCP_JK_A			8
-#define SPITZ_SCP_ADC_TEMP_ON		9
-#define SPITZ_SCP2_IR_ON		1
-#define SPITZ_SCP2_AKIN_PULLUP		2
-#define SPITZ_SCP2_BACKLIGHT_CONT	7
-#define SPITZ_SCP2_BACKLIGHT_ON		8
-#define SPITZ_SCP2_MIC_BIAS		9
-
-static void spitz_scoop_gpio_setup(PXA2xxState *cpu,
-                DeviceState *scp0, DeviceState *scp1)
-{
-    qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8);
-
-    qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]);
-    qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]);
-    qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]);
-    qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]);
-
-    if (scp1) {
-        qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]);
-        qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]);
-    }
-
-    qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);
-}
-
-#define SPITZ_GPIO_HSYNC		22
-#define SPITZ_GPIO_SD_DETECT		9
-#define SPITZ_GPIO_SD_WP		81
-#define SPITZ_GPIO_ON_RESET		89
-#define SPITZ_GPIO_BAT_COVER		90
-#define SPITZ_GPIO_CF1_IRQ		105
-#define SPITZ_GPIO_CF1_CD		94
-#define SPITZ_GPIO_CF2_IRQ		106
-#define SPITZ_GPIO_CF2_CD		93
-
-static int spitz_hsync;
-
-static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
-{
-    PXA2xxState *cpu = (PXA2xxState *) opaque;
-    qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync);
-    spitz_hsync ^= 1;
-}
-
-static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
-{
-    qemu_irq lcd_hsync;
-    /*
-     * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
-     * read to satisfy broken guests that poll-wait for hsync.
-     * Simulating a real hsync event would be less practical and
-     * wouldn't guarantee that a guest ever exits the loop.
-     */
-    spitz_hsync = 0;
-    lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0];
-    pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);
-    pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);
-
-    /* MMC/SD host */
-    pxa2xx_mmci_handlers(cpu->mmc,
-                    qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP),
-                    qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT));
-
-    /* Battery lock always closed */
-    qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER));
-
-    /* Handle reset */
-    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset);
-
-    /* PCMCIA signals: card's IRQ and Card-Detect */
-    if (slots >= 1)
-        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
-                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ),
-                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD));
-    if (slots >= 2)
-        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
-                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ),
-                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD));
-}
-
-/* Board init.  */
-enum spitz_model_e { spitz, akita, borzoi, terrier };
-
-#define SPITZ_RAM	0x04000000
-#define SPITZ_ROM	0x00800000
-
-static struct arm_boot_info spitz_binfo = {
-    .loader_start = PXA2XX_SDRAM_BASE,
-    .ram_size = 0x04000000,
-};
-
-static void spitz_common_init(QEMUMachineInitArgs *args,
-                              enum spitz_model_e model, int arm_id)
-{
-    PXA2xxState *mpu;
-    DeviceState *scp0, *scp1 = NULL;
-    MemoryRegion *address_space_mem = get_system_memory();
-    MemoryRegion *rom = g_new(MemoryRegion, 1);
-    const char *cpu_model = args->cpu_model;
-
-    if (!cpu_model)
-        cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0";
-
-    /* Setup CPU & memory */
-    mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, cpu_model);
-
-    sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M);
-
-    memory_region_init_ram(rom, "spitz.rom", SPITZ_ROM);
-    vmstate_register_ram_global(rom);
-    memory_region_set_readonly(rom, true);
-    memory_region_add_subregion(address_space_mem, 0, rom);
-
-    /* Setup peripherals */
-    spitz_keyboard_register(mpu);
-
-    spitz_ssp_attach(mpu);
-
-    scp0 = sysbus_create_simple("scoop", 0x10800000, NULL);
-    if (model != akita) {
-        scp1 = sysbus_create_simple("scoop", 0x08800040, NULL);
-    }
-
-    spitz_scoop_gpio_setup(mpu, scp0, scp1);
-
-    spitz_gpio_setup(mpu, (model == akita) ? 1 : 2);
-
-    spitz_i2c_setup(mpu);
-
-    if (model == akita)
-        spitz_akita_i2c_setup(mpu);
-
-    if (model == terrier)
-        /* A 6.0 GB microdrive is permanently sitting in CF slot 1.  */
-        spitz_microdrive_attach(mpu, 1);
-    else if (model != akita)
-        /* A 4.0 GB microdrive is permanently sitting in CF slot 0.  */
-        spitz_microdrive_attach(mpu, 0);
-
-    spitz_binfo.kernel_filename = args->kernel_filename;
-    spitz_binfo.kernel_cmdline = args->kernel_cmdline;
-    spitz_binfo.initrd_filename = args->initrd_filename;
-    spitz_binfo.board_id = arm_id;
-    arm_load_kernel(mpu->cpu, &spitz_binfo);
-    sl_bootparam_write(SL_PXA_PARAM_BASE);
-}
-
-static void spitz_init(QEMUMachineInitArgs *args)
-{
-    spitz_common_init(args, spitz, 0x2c9);
-}
-
-static void borzoi_init(QEMUMachineInitArgs *args)
-{
-    spitz_common_init(args, borzoi, 0x33f);
-}
-
-static void akita_init(QEMUMachineInitArgs *args)
-{
-    spitz_common_init(args, akita, 0x2e8);
-}
-
-static void terrier_init(QEMUMachineInitArgs *args)
-{
-    spitz_common_init(args, terrier, 0x33f);
-}
-
-static QEMUMachine akitapda_machine = {
-    .name = "akita",
-    .desc = "Akita PDA (PXA270)",
-    .init = akita_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine spitzpda_machine = {
-    .name = "spitz",
-    .desc = "Spitz PDA (PXA270)",
-    .init = spitz_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine borzoipda_machine = {
-    .name = "borzoi",
-    .desc = "Borzoi PDA (PXA270)",
-    .init = borzoi_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine terrierpda_machine = {
-    .name = "terrier",
-    .desc = "Terrier PDA (PXA270)",
-    .init = terrier_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static void spitz_machine_init(void)
-{
-    qemu_register_machine(&akitapda_machine);
-    qemu_register_machine(&spitzpda_machine);
-    qemu_register_machine(&borzoipda_machine);
-    qemu_register_machine(&terrierpda_machine);
-}
-
-machine_init(spitz_machine_init);
-
-static bool is_version_0(void *opaque, int version_id)
-{
-    return version_id == 0;
-}
-
-static VMStateDescription vmstate_sl_nand_info = {
-    .name = "sl-nand",
-    .version_id = 0,
-    .minimum_version_id = 0,
-    .minimum_version_id_old = 0,
-    .fields = (VMStateField []) {
-        VMSTATE_UINT8(ctl, SLNANDState),
-        VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState),
-        VMSTATE_END_OF_LIST(),
-    },
-};
-
-static Property sl_nand_properties[] = {
-    DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG),
-    DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void sl_nand_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = sl_nand_init;
-    dc->vmsd = &vmstate_sl_nand_info;
-    dc->props = sl_nand_properties;
-}
-
-static const TypeInfo sl_nand_info = {
-    .name          = "sl-nand",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(SLNANDState),
-    .class_init    = sl_nand_class_init,
-};
-
-static VMStateDescription vmstate_spitz_kbd = {
-    .name = "spitz-keyboard",
-    .version_id = 1,
-    .minimum_version_id = 0,
-    .minimum_version_id_old = 0,
-    .post_load = spitz_keyboard_post_load,
-    .fields = (VMStateField []) {
-        VMSTATE_UINT16(sense_state, SpitzKeyboardState),
-        VMSTATE_UINT16(strobe_state, SpitzKeyboardState),
-        VMSTATE_UNUSED_TEST(is_version_0, 5),
-        VMSTATE_END_OF_LIST(),
-    },
-};
-
-static Property spitz_keyboard_properties[] = {
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void spitz_keyboard_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = spitz_keyboard_init;
-    dc->vmsd = &vmstate_spitz_kbd;
-    dc->props = spitz_keyboard_properties;
-}
-
-static const TypeInfo spitz_keyboard_info = {
-    .name          = "spitz-keyboard",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(SpitzKeyboardState),
-    .class_init    = spitz_keyboard_class_init,
-};
-
-static const VMStateDescription vmstate_corgi_ssp_regs = {
-    .name = "corgi-ssp",
-    .version_id = 2,
-    .minimum_version_id = 2,
-    .minimum_version_id_old = 2,
-    .fields = (VMStateField []) {
-        VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState),
-        VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3),
-        VMSTATE_END_OF_LIST(),
-    }
-};
-
-static void corgi_ssp_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
-    k->init = corgi_ssp_init;
-    k->transfer = corgi_ssp_transfer;
-    dc->vmsd = &vmstate_corgi_ssp_regs;
-}
-
-static const TypeInfo corgi_ssp_info = {
-    .name          = "corgi-ssp",
-    .parent        = TYPE_SSI_SLAVE,
-    .instance_size = sizeof(CorgiSSPState),
-    .class_init    = corgi_ssp_class_init,
-};
-
-static const VMStateDescription vmstate_spitz_lcdtg_regs = {
-    .name = "spitz-lcdtg",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields = (VMStateField []) {
-        VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG),
-        VMSTATE_UINT32(bl_intensity, SpitzLCDTG),
-        VMSTATE_UINT32(bl_power, SpitzLCDTG),
-        VMSTATE_END_OF_LIST(),
-    }
-};
-
-static void spitz_lcdtg_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
-    k->init = spitz_lcdtg_init;
-    k->transfer = spitz_lcdtg_transfer;
-    dc->vmsd = &vmstate_spitz_lcdtg_regs;
-}
-
-static const TypeInfo spitz_lcdtg_info = {
-    .name          = "spitz-lcdtg",
-    .parent        = TYPE_SSI_SLAVE,
-    .instance_size = sizeof(SpitzLCDTG),
-    .class_init    = spitz_lcdtg_class_init,
-};
-
-static void spitz_register_types(void)
-{
-    type_register_static(&corgi_ssp_info);
-    type_register_static(&spitz_lcdtg_info);
-    type_register_static(&spitz_keyboard_info);
-    type_register_static(&sl_nand_info);
-}
-
-type_init(spitz_register_types)