diff options
author | Bin Meng <bin.meng@windriver.com> | 2021-01-28 14:30:32 +0800 |
---|---|---|
committer | Philippe Mathieu-Daudé <f4bug@amsat.org> | 2021-02-20 00:17:09 +0100 |
commit | d56f3efa28043d17ca0c71752dbde81b25a042cb (patch) | |
tree | 161822e93e0aeab74d2d0d311b5705dd31bee7d4 /hw/sd | |
parent | 5020e3cb769e90737bba2d54222a3a449eae7bc0 (diff) | |
download | qemu-d56f3efa28043d17ca0c71752dbde81b25a042cb.zip qemu-d56f3efa28043d17ca0c71752dbde81b25a042cb.tar.gz qemu-d56f3efa28043d17ca0c71752dbde81b25a042cb.tar.bz2 |
hw/sd: ssi-sd: Support multiple block write
For a multiple block write operation, each block begins with a multi
write start token. Unlike the SD mode that the multiple block write
ends when receiving a STOP_TRAN command (CMD12), a special stop tran
token is used to signal the card.
Emulating this by manually sending a CMD12 to the SD card core, to
bring it out of the receiving data state.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-7-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Diffstat (limited to 'hw/sd')
-rw-r--r-- | hw/sd/ssi-sd.c | 33 |
1 files changed, 31 insertions, 2 deletions
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index 1205ad8..200e885 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -4,6 +4,11 @@ * Copyright (c) 2007-2009 CodeSourcery. * Written by Paul Brook * + * Copyright (c) 2021 Wind River Systems, Inc. + * Improved by Bin Meng <bin.meng@windriver.com> + * + * Validated with U-Boot v2021.01 and Linux v5.10 mmc_spi driver + * * This code is licensed under the GNU GPL v2. * * Contributions after 2012-01-13 are licensed under the terms of the @@ -82,6 +87,10 @@ OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD) #define SSI_SDR_ADDRESS_ERROR 0x2000 #define SSI_SDR_PARAMETER_ERROR 0x4000 +/* multiple block write */ +#define SSI_TOKEN_MULTI_WRITE 0xfc +/* terminate multiple block write */ +#define SSI_TOKEN_STOP_TRAN 0xfd /* single block read/write, multiple block read */ #define SSI_TOKEN_SINGLE 0xfe @@ -94,6 +103,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD) static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val) { ssi_sd_state *s = SSI_SD(dev); + SDRequest request; + uint8_t longresp[16]; /* * Special case: allow CMD12 (STOP TRANSMISSION) while reading data. @@ -125,9 +136,29 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val) return SSI_DUMMY; break; case SSI_TOKEN_SINGLE: + case SSI_TOKEN_MULTI_WRITE: DPRINTF("Start write block\n"); s->mode = SSI_SD_DATA_WRITE; return SSI_DUMMY; + case SSI_TOKEN_STOP_TRAN: + DPRINTF("Stop multiple write\n"); + + /* manually issue cmd12 to stop the transfer */ + request.cmd = 12; + request.arg = 0; + s->arglen = sdbus_do_command(&s->sdbus, &request, longresp); + if (s->arglen <= 0) { + s->arglen = 1; + /* a zero value indicates the card is busy */ + s->response[0] = 0; + DPRINTF("SD card busy\n"); + } else { + s->arglen = 1; + /* a non-zero value indicates the card is ready */ + s->response[0] = SSI_DUMMY; + } + + return SSI_DUMMY; } s->cmd = val & 0x3f; @@ -136,8 +167,6 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val) return SSI_DUMMY; case SSI_SD_CMDARG: if (s->arglen == 4) { - SDRequest request; - uint8_t longresp[16]; /* FIXME: Check CRC. */ request.cmd = s->cmd; request.arg = ldl_be_p(s->cmdarg); |