SiFive RISC-V UART Device

QEMU model of the UART on the SiFive E300 and U500 series SOCs.
BBL supports the SiFive UART for early console access via the SBI
(Supervisor Binary Interface) and the linux kernel SBI console.

The SiFive UART implements the pre qom legacy interface consistent
with the 16550a UART in 'hw/char/serial.c'.

Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

1 files changed, 176 insertions, 0 deletions

diff --git a/hw/riscv/sifive_uart.c b/hw/riscv/sifive_uart.c
new file mode 100644
index 0000000..b0c3798
--- /dev/null
+++ b/hw/riscv/sifive_uart.c
@@ -0,0 +1,176 @@
+/*
+ * QEMU model of the UART on the SiFive E300 and U500 series SOCs.
+ *
+ * Copyright (c) 2016 Stefan O'Rear
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/sysbus.h"
+#include "chardev/char.h"
+#include "chardev/char-fe.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/sifive_uart.h"
+
+/*
+ * Not yet implemented:
+ *
+ * Transmit FIFO using "qemu/fifo8.h"
+ * SIFIVE_UART_IE_TXWM interrupts
+ * SIFIVE_UART_IE_RXWM interrupts must honor fifo watermark
+ * Rx FIFO watermark interrupt trigger threshold
+ * Tx FIFO watermark interrupt trigger threshold.
+ */
+
+static void update_irq(SiFiveUARTState *s)
+{
+    int cond = 0;
+    if ((s->ie & SIFIVE_UART_IE_RXWM) && s->rx_fifo_len) {
+        cond = 1;
+    }
+    if (cond) {
+        qemu_irq_raise(s->irq);
+    } else {
+        qemu_irq_lower(s->irq);
+    }
+}
+
+static uint64_t
+uart_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    SiFiveUARTState *s = opaque;
+    unsigned char r;
+    switch (addr) {
+    case SIFIVE_UART_RXFIFO:
+        if (s->rx_fifo_len) {
+            r = s->rx_fifo[0];
+            memmove(s->rx_fifo, s->rx_fifo + 1, s->rx_fifo_len - 1);
+            s->rx_fifo_len--;
+            qemu_chr_fe_accept_input(&s->chr);
+            update_irq(s);
+            return r;
+        }
+        return 0x80000000;
+
+    case SIFIVE_UART_TXFIFO:
+        return 0; /* Should check tx fifo */
+    case SIFIVE_UART_IE:
+        return s->ie;
+    case SIFIVE_UART_IP:
+        return s->rx_fifo_len ? SIFIVE_UART_IP_RXWM : 0;
+    case SIFIVE_UART_TXCTRL:
+        return s->txctrl;
+    case SIFIVE_UART_RXCTRL:
+        return s->rxctrl;
+    case SIFIVE_UART_DIV:
+        return s->div;
+    }
+
+    hw_error("%s: bad read: addr=0x%x\n",
+        __func__, (int)addr);
+    return 0;
+}
+
+static void
+uart_write(void *opaque, hwaddr addr,
+           uint64_t val64, unsigned int size)
+{
+    SiFiveUARTState *s = opaque;
+    uint32_t value = val64;
+    unsigned char ch = value;
+
+    switch (addr) {
+    case SIFIVE_UART_TXFIFO:
+        qemu_chr_fe_write(&s->chr, &ch, 1);
+        return;
+    case SIFIVE_UART_IE:
+        s->ie = val64;
+        update_irq(s);
+        return;
+    case SIFIVE_UART_TXCTRL:
+        s->txctrl = val64;
+        return;
+    case SIFIVE_UART_RXCTRL:
+        s->rxctrl = val64;
+        return;
+    case SIFIVE_UART_DIV:
+        s->div = val64;
+        return;
+    }
+    hw_error("%s: bad write: addr=0x%x v=0x%x\n",
+        __func__, (int)addr, (int)value);
+}
+
+static const MemoryRegionOps uart_ops = {
+    .read = uart_read,
+    .write = uart_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void uart_rx(void *opaque, const uint8_t *buf, int size)
+{
+    SiFiveUARTState *s = opaque;
+
+    /* Got a byte.  */
+    if (s->rx_fifo_len >= sizeof(s->rx_fifo)) {
+        printf("WARNING: UART dropped char.\n");
+        return;
+    }
+    s->rx_fifo[s->rx_fifo_len++] = *buf;
+
+    update_irq(s);
+}
+
+static int uart_can_rx(void *opaque)
+{
+    SiFiveUARTState *s = opaque;
+
+    return s->rx_fifo_len < sizeof(s->rx_fifo);
+}
+
+static void uart_event(void *opaque, int event)
+{
+}
+
+static int uart_be_change(void *opaque)
+{
+    SiFiveUARTState *s = opaque;
+
+    qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+        uart_be_change, s, NULL, true);
+
+    return 0;
+}
+
+/*
+ * Create UART device.
+ */
+SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
+    Chardev *chr, qemu_irq irq)
+{
+    SiFiveUARTState *s = g_malloc0(sizeof(SiFiveUARTState));
+    s->irq = irq;
+    qemu_chr_fe_init(&s->chr, chr, &error_abort);
+    qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event,
+        uart_be_change, s, NULL, true);
+    memory_region_init_io(&s->mmio, NULL, &uart_ops, s,
+                          TYPE_SIFIVE_UART, SIFIVE_UART_MAX);
+    memory_region_add_subregion(address_space, base, &s->mmio);
+    return s;
+}