hw: move boards and other isolated files to hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 404 deletions

diff --git a/hw/realview.c b/hw/realview.c
deleted file mode 100644
index 5fb490c..0000000
--- a/hw/realview.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * ARM RealView Baseboard System emulation.
- *
- * Copyright (c) 2006-2007 CodeSourcery.
- * Written by Paul Brook
- *
- * This code is licensed under the GPL.
- */
-
-#include "hw/sysbus.h"
-#include "hw/arm-misc.h"
-#include "hw/primecell.h"
-#include "hw/devices.h"
-#include "hw/pci/pci.h"
-#include "net/net.h"
-#include "sysemu/sysemu.h"
-#include "hw/boards.h"
-#include "hw/i2c.h"
-#include "sysemu/blockdev.h"
-#include "exec/address-spaces.h"
-
-#define SMP_BOOT_ADDR 0xe0000000
-#define SMP_BOOTREG_ADDR 0x10000030
-
-/* Board init.  */
-
-static struct arm_boot_info realview_binfo = {
-    .smp_loader_start = SMP_BOOT_ADDR,
-    .smp_bootreg_addr = SMP_BOOTREG_ADDR,
-};
-
-/* The following two lists must be consistent.  */
-enum realview_board_type {
-    BOARD_EB,
-    BOARD_EB_MPCORE,
-    BOARD_PB_A8,
-    BOARD_PBX_A9,
-};
-
-static const int realview_board_id[] = {
-    0x33b,
-    0x33b,
-    0x769,
-    0x76d
-};
-
-static void realview_init(QEMUMachineInitArgs *args,
-                          enum realview_board_type board_type)
-{
-    ARMCPU *cpu = NULL;
-    CPUARMState *env;
-    MemoryRegion *sysmem = get_system_memory();
-    MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
-    MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
-    MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
-    MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
-    DeviceState *dev, *sysctl, *gpio2, *pl041;
-    SysBusDevice *busdev;
-    qemu_irq *irqp;
-    qemu_irq pic[64];
-    qemu_irq mmc_irq[2];
-    PCIBus *pci_bus;
-    NICInfo *nd;
-    i2c_bus *i2c;
-    int n;
-    int done_nic = 0;
-    qemu_irq cpu_irq[4];
-    int is_mpcore = 0;
-    int is_pb = 0;
-    uint32_t proc_id = 0;
-    uint32_t sys_id;
-    ram_addr_t low_ram_size;
-    ram_addr_t ram_size = args->ram_size;
-
-    switch (board_type) {
-    case BOARD_EB:
-        break;
-    case BOARD_EB_MPCORE:
-        is_mpcore = 1;
-        break;
-    case BOARD_PB_A8:
-        is_pb = 1;
-        break;
-    case BOARD_PBX_A9:
-        is_mpcore = 1;
-        is_pb = 1;
-        break;
-    }
-    for (n = 0; n < smp_cpus; n++) {
-        cpu = cpu_arm_init(args->cpu_model);
-        if (!cpu) {
-            fprintf(stderr, "Unable to find CPU definition\n");
-            exit(1);
-        }
-        irqp = arm_pic_init_cpu(cpu);
-        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
-    }
-    env = &cpu->env;
-    if (arm_feature(env, ARM_FEATURE_V7)) {
-        if (is_mpcore) {
-            proc_id = 0x0c000000;
-        } else {
-            proc_id = 0x0e000000;
-        }
-    } else if (arm_feature(env, ARM_FEATURE_V6K)) {
-        proc_id = 0x06000000;
-    } else if (arm_feature(env, ARM_FEATURE_V6)) {
-        proc_id = 0x04000000;
-    } else {
-        proc_id = 0x02000000;
-    }
-
-    if (is_pb && ram_size > 0x20000000) {
-        /* Core tile RAM.  */
-        low_ram_size = ram_size - 0x20000000;
-        ram_size = 0x20000000;
-        memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);
-        vmstate_register_ram_global(ram_lo);
-        memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
-    }
-
-    memory_region_init_ram(ram_hi, "realview.highmem", ram_size);
-    vmstate_register_ram_global(ram_hi);
-    low_ram_size = ram_size;
-    if (low_ram_size > 0x10000000)
-      low_ram_size = 0x10000000;
-    /* SDRAM at address zero.  */
-    memory_region_init_alias(ram_alias, "realview.alias",
-                             ram_hi, 0, low_ram_size);
-    memory_region_add_subregion(sysmem, 0, ram_alias);
-    if (is_pb) {
-        /* And again at a high address.  */
-        memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
-    } else {
-        ram_size = low_ram_size;
-    }
-
-    sys_id = is_pb ? 0x01780500 : 0xc1400400;
-    sysctl = qdev_create(NULL, "realview_sysctl");
-    qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
-    qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
-    qdev_init_nofail(sysctl);
-    sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
-
-    if (is_mpcore) {
-        hwaddr periphbase;
-        dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
-        qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
-        qdev_init_nofail(dev);
-        busdev = SYS_BUS_DEVICE(dev);
-        if (is_pb) {
-            periphbase = 0x1f000000;
-        } else {
-            periphbase = 0x10100000;
-        }
-        sysbus_mmio_map(busdev, 0, periphbase);
-        for (n = 0; n < smp_cpus; n++) {
-            sysbus_connect_irq(busdev, n, cpu_irq[n]);
-        }
-        sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
-        /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
-        realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
-    } else {
-        uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
-        /* For now just create the nIRQ GIC, and ignore the others.  */
-        dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
-    }
-    for (n = 0; n < 64; n++) {
-        pic[n] = qdev_get_gpio_in(dev, n);
-    }
-
-    pl041 = qdev_create(NULL, "pl041");
-    qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
-    qdev_init_nofail(pl041);
-    sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);
-    sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]);
-
-    sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
-    sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
-
-    sysbus_create_simple("pl011", 0x10009000, pic[12]);
-    sysbus_create_simple("pl011", 0x1000a000, pic[13]);
-    sysbus_create_simple("pl011", 0x1000b000, pic[14]);
-    sysbus_create_simple("pl011", 0x1000c000, pic[15]);
-
-    /* DMA controller is optional, apparently.  */
-    sysbus_create_simple("pl081", 0x10030000, pic[24]);
-
-    sysbus_create_simple("sp804", 0x10011000, pic[4]);
-    sysbus_create_simple("sp804", 0x10012000, pic[5]);
-
-    sysbus_create_simple("pl061", 0x10013000, pic[6]);
-    sysbus_create_simple("pl061", 0x10014000, pic[7]);
-    gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
-
-    sysbus_create_simple("pl111", 0x10020000, pic[23]);
-
-    dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
-    /* Wire up MMC card detect and read-only signals. These have
-     * to go to both the PL061 GPIO and the sysctl register.
-     * Note that the PL181 orders these lines (readonly,inserted)
-     * and the PL061 has them the other way about. Also the card
-     * detect line is inverted.
-     */
-    mmc_irq[0] = qemu_irq_split(
-        qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
-        qdev_get_gpio_in(gpio2, 1));
-    mmc_irq[1] = qemu_irq_split(
-        qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
-        qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
-    qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
-    qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
-
-    sysbus_create_simple("pl031", 0x10017000, pic[10]);
-
-    if (!is_pb) {
-        dev = qdev_create(NULL, "realview_pci");
-        busdev = SYS_BUS_DEVICE(dev);
-        qdev_init_nofail(dev);
-        sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */
-        sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */
-        sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */
-        sysbus_connect_irq(busdev, 0, pic[48]);
-        sysbus_connect_irq(busdev, 1, pic[49]);
-        sysbus_connect_irq(busdev, 2, pic[50]);
-        sysbus_connect_irq(busdev, 3, pic[51]);
-        pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
-        if (usb_enabled(false)) {
-            pci_create_simple(pci_bus, -1, "pci-ohci");
-        }
-        n = drive_get_max_bus(IF_SCSI);
-        while (n >= 0) {
-            pci_create_simple(pci_bus, -1, "lsi53c895a");
-            n--;
-        }
-    }
-    for(n = 0; n < nb_nics; n++) {
-        nd = &nd_table[n];
-
-        if (!done_nic && (!nd->model ||
-                    strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
-            if (is_pb) {
-                lan9118_init(nd, 0x4e000000, pic[28]);
-            } else {
-                smc91c111_init(nd, 0x4e000000, pic[28]);
-            }
-            done_nic = 1;
-        } else {
-            pci_nic_init_nofail(nd, "rtl8139", NULL);
-        }
-    }
-
-    dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
-    i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
-    i2c_create_slave(i2c, "ds1338", 0x68);
-
-    /* Memory map for RealView Emulation Baseboard:  */
-    /* 0x10000000 System registers.  */
-    /*  0x10001000 System controller.  */
-    /* 0x10002000 Two-Wire Serial Bus.  */
-    /* 0x10003000 Reserved.  */
-    /*  0x10004000 AACI.  */
-    /*  0x10005000 MCI.  */
-    /* 0x10006000 KMI0.  */
-    /* 0x10007000 KMI1.  */
-    /*  0x10008000 Character LCD. (EB) */
-    /* 0x10009000 UART0.  */
-    /* 0x1000a000 UART1.  */
-    /* 0x1000b000 UART2.  */
-    /* 0x1000c000 UART3.  */
-    /*  0x1000d000 SSPI.  */
-    /*  0x1000e000 SCI.  */
-    /* 0x1000f000 Reserved.  */
-    /*  0x10010000 Watchdog.  */
-    /* 0x10011000 Timer 0+1.  */
-    /* 0x10012000 Timer 2+3.  */
-    /*  0x10013000 GPIO 0.  */
-    /*  0x10014000 GPIO 1.  */
-    /*  0x10015000 GPIO 2.  */
-    /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */
-    /* 0x10017000 RTC.  */
-    /*  0x10018000 DMC.  */
-    /*  0x10019000 PCI controller config.  */
-    /*  0x10020000 CLCD.  */
-    /* 0x10030000 DMA Controller.  */
-    /* 0x10040000 GIC1. (EB) */
-    /*  0x10050000 GIC2. (EB) */
-    /*  0x10060000 GIC3. (EB) */
-    /*  0x10070000 GIC4. (EB) */
-    /*  0x10080000 SMC.  */
-    /* 0x1e000000 GIC1. (PB) */
-    /*  0x1e001000 GIC2. (PB) */
-    /*  0x1e002000 GIC3. (PB) */
-    /*  0x1e003000 GIC4. (PB) */
-    /*  0x40000000 NOR flash.  */
-    /*  0x44000000 DoC flash.  */
-    /*  0x48000000 SRAM.  */
-    /*  0x4c000000 Configuration flash.  */
-    /* 0x4e000000 Ethernet.  */
-    /*  0x4f000000 USB.  */
-    /*  0x50000000 PISMO.  */
-    /*  0x54000000 PISMO.  */
-    /*  0x58000000 PISMO.  */
-    /*  0x5c000000 PISMO.  */
-    /* 0x60000000 PCI.  */
-    /* 0x61000000 PCI Self Config.  */
-    /* 0x62000000 PCI Config.  */
-    /* 0x63000000 PCI IO.  */
-    /* 0x64000000 PCI mem 0.  */
-    /* 0x68000000 PCI mem 1.  */
-    /* 0x6c000000 PCI mem 2.  */
-
-    /* ??? Hack to map an additional page of ram for the secondary CPU
-       startup code.  I guess this works on real hardware because the
-       BootROM happens to be in ROM/flash or in memory that isn't clobbered
-       until after Linux boots the secondary CPUs.  */
-    memory_region_init_ram(ram_hack, "realview.hack", 0x1000);
-    vmstate_register_ram_global(ram_hack);
-    memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
-
-    realview_binfo.ram_size = ram_size;
-    realview_binfo.kernel_filename = args->kernel_filename;
-    realview_binfo.kernel_cmdline = args->kernel_cmdline;
-    realview_binfo.initrd_filename = args->initrd_filename;
-    realview_binfo.nb_cpus = smp_cpus;
-    realview_binfo.board_id = realview_board_id[board_type];
-    realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
-    arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);
-}
-
-static void realview_eb_init(QEMUMachineInitArgs *args)
-{
-    if (!args->cpu_model) {
-        args->cpu_model = "arm926";
-    }
-    realview_init(args, BOARD_EB);
-}
-
-static void realview_eb_mpcore_init(QEMUMachineInitArgs *args)
-{
-    if (!args->cpu_model) {
-        args->cpu_model = "arm11mpcore";
-    }
-    realview_init(args, BOARD_EB_MPCORE);
-}
-
-static void realview_pb_a8_init(QEMUMachineInitArgs *args)
-{
-    if (!args->cpu_model) {
-        args->cpu_model = "cortex-a8";
-    }
-    realview_init(args, BOARD_PB_A8);
-}
-
-static void realview_pbx_a9_init(QEMUMachineInitArgs *args)
-{
-    if (!args->cpu_model) {
-        args->cpu_model = "cortex-a9";
-    }
-    realview_init(args, BOARD_PBX_A9);
-}
-
-static QEMUMachine realview_eb_machine = {
-    .name = "realview-eb",
-    .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
-    .init = realview_eb_init,
-    .block_default_type = IF_SCSI,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine realview_eb_mpcore_machine = {
-    .name = "realview-eb-mpcore",
-    .desc = "ARM RealView Emulation Baseboard (ARM11MPCore)",
-    .init = realview_eb_mpcore_init,
-    .block_default_type = IF_SCSI,
-    .max_cpus = 4,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine realview_pb_a8_machine = {
-    .name = "realview-pb-a8",
-    .desc = "ARM RealView Platform Baseboard for Cortex-A8",
-    .init = realview_pb_a8_init,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static QEMUMachine realview_pbx_a9_machine = {
-    .name = "realview-pbx-a9",
-    .desc = "ARM RealView Platform Baseboard Explore for Cortex-A9",
-    .init = realview_pbx_a9_init,
-    .block_default_type = IF_SCSI,
-    .max_cpus = 4,
-    DEFAULT_MACHINE_OPTIONS,
-};
-
-static void realview_machine_init(void)
-{
-    qemu_register_machine(&realview_eb_machine);
-    qemu_register_machine(&realview_eb_mpcore_machine);
-    qemu_register_machine(&realview_pb_a8_machine);
-    qemu_register_machine(&realview_pbx_a9_machine);
-}
-
-machine_init(realview_machine_init);