unicore32-softmmu: Add puv3 pm support

This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".

v1->v2: Add initialization to ret in puv3_pm_read.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

1 files changed, 149 insertions, 0 deletions

diff --git a/hw/puv3_pm.c b/hw/puv3_pm.c
new file mode 100644
index 0000000..621c968
--- /dev/null
+++ b/hw/puv3_pm.c
@@ -0,0 +1,149 @@
+/*
+ * Power Management device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "hw.h"
+#include "sysbus.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+typedef struct {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+
+    uint32_t reg_PMCR;
+    uint32_t reg_PCGR;
+    uint32_t reg_PLL_SYS_CFG;
+    uint32_t reg_PLL_DDR_CFG;
+    uint32_t reg_PLL_VGA_CFG;
+    uint32_t reg_DIVCFG;
+} PUV3PMState;
+
+static uint64_t puv3_pm_read(void *opaque, target_phys_addr_t offset,
+        unsigned size)
+{
+    PUV3PMState *s = opaque;
+    uint32_t ret = 0;
+
+    switch (offset) {
+    case 0x14:
+        ret = s->reg_PCGR;
+        break;
+    case 0x18:
+        ret = s->reg_PLL_SYS_CFG;
+        break;
+    case 0x1c:
+        ret = s->reg_PLL_DDR_CFG;
+        break;
+    case 0x20:
+        ret = s->reg_PLL_VGA_CFG;
+        break;
+    case 0x24:
+        ret = s->reg_DIVCFG;
+        break;
+    case 0x28: /* PLL SYS STATUS */
+        ret = 0x00002401;
+        break;
+    case 0x2c: /* PLL DDR STATUS */
+        ret = 0x00100c00;
+        break;
+    case 0x30: /* PLL VGA STATUS */
+        ret = 0x00003801;
+        break;
+    case 0x34: /* DIV STATUS */
+        ret = 0x22f52015;
+        break;
+    case 0x38: /* SW RESET */
+        ret = 0x0;
+        break;
+    case 0x44: /* PLL DFC DONE */
+        ret = 0x7;
+        break;
+    default:
+        DPRINTF("Bad offset 0x%x\n", offset);
+    }
+    DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+
+    return ret;
+}
+
+static void puv3_pm_write(void *opaque, target_phys_addr_t offset,
+        uint64_t value, unsigned size)
+{
+    PUV3PMState *s = opaque;
+
+    switch (offset) {
+    case 0x0:
+        s->reg_PMCR = value;
+        break;
+    case 0x14:
+        s->reg_PCGR = value;
+        break;
+    case 0x18:
+        s->reg_PLL_SYS_CFG = value;
+        break;
+    case 0x1c:
+        s->reg_PLL_DDR_CFG = value;
+        break;
+    case 0x20:
+        s->reg_PLL_VGA_CFG = value;
+        break;
+    case 0x24:
+    case 0x38:
+        break;
+    default:
+        DPRINTF("Bad offset 0x%x\n", offset);
+    }
+    DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+}
+
+static const MemoryRegionOps puv3_pm_ops = {
+    .read = puv3_pm_read,
+    .write = puv3_pm_write,
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int puv3_pm_init(SysBusDevice *dev)
+{
+    PUV3PMState *s = FROM_SYSBUS(PUV3PMState, dev);
+
+    s->reg_PCGR = 0x0;
+
+    memory_region_init_io(&s->iomem, &puv3_pm_ops, s, "puv3_pm",
+            PUV3_REGS_OFFSET);
+    sysbus_init_mmio(dev, &s->iomem);
+
+    return 0;
+}
+
+static void puv3_pm_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+    sdc->init = puv3_pm_init;
+}
+
+static const TypeInfo puv3_pm_info = {
+    .name = "puv3_pm",
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(PUV3PMState),
+    .class_init = puv3_pm_class_init,
+};
+
+static void puv3_pm_register_type(void)
+{
+    type_register_static(&puv3_pm_info);
+}
+
+type_init(puv3_pm_register_type)