bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plx

The 'hwaddr' type is defined in "exec/hwaddr.h" as:

    hwaddr is the type of a physical address
   (its size can be different from 'target_ulong').

All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:

 $ fgrep define include/exec/hwaddr.h
 #define HWADDR_H
 #define HWADDR_BITS 64
 #define HWADDR_MAX UINT64_MAX
 #define TARGET_FMT_plx "%016" PRIx64
         ^^^^^^
 #define HWADDR_PRId PRId64
 #define HWADDR_PRIi PRIi64
 #define HWADDR_PRIo PRIo64
 #define HWADDR_PRIu PRIu64
 #define HWADDR_PRIx PRIx64
 #define HWADDR_PRIX PRIX64

Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:

$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
 #define TARGET_FMT_lx "%08x"
 #define TARGET_FMT_ld "%d"
 #define TARGET_FMT_lu "%u"
 #define TARGET_FMT_lx "%016" PRIx64
 #define TARGET_FMT_ld "%" PRId64
 #define TARGET_FMT_lu "%" PRIu64

Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:

 $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>

1 files changed, 7 insertions, 7 deletions

diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c
index ac1eebf..1cf25ba 100644
--- a/hw/pci-host/bonito.c
+++ b/hw/pci-host/bonito.c
@@ -251,7 +251,7 @@ static void bonito_writel(void *opaque, hwaddr addr,
 
     saddr = addr >> 2;
 
-    DPRINTF("bonito_writel "TARGET_FMT_plx" val %lx saddr %x\n",
+    DPRINTF("bonito_writel "HWADDR_FMT_plx" val %lx saddr %x\n",
             addr, val, saddr);
     switch (saddr) {
     case BONITO_BONPONCFG:
@@ -314,7 +314,7 @@ static uint64_t bonito_readl(void *opaque, hwaddr addr,
 
     saddr = addr >> 2;
 
-    DPRINTF("bonito_readl "TARGET_FMT_plx"\n", addr);
+    DPRINTF("bonito_readl "HWADDR_FMT_plx"\n", addr);
     switch (saddr) {
     case BONITO_INTISR:
         return s->regs[saddr];
@@ -339,7 +339,7 @@ static void bonito_pciconf_writel(void *opaque, hwaddr addr,
     PCIBonitoState *s = opaque;
     PCIDevice *d = PCI_DEVICE(s);
 
-    DPRINTF("bonito_pciconf_writel "TARGET_FMT_plx" val %lx\n", addr, val);
+    DPRINTF("bonito_pciconf_writel "HWADDR_FMT_plx" val %lx\n", addr, val);
     d->config_write(d, addr, val, 4);
 }
 
@@ -350,7 +350,7 @@ static uint64_t bonito_pciconf_readl(void *opaque, hwaddr addr,
     PCIBonitoState *s = opaque;
     PCIDevice *d = PCI_DEVICE(s);
 
-    DPRINTF("bonito_pciconf_readl "TARGET_FMT_plx"\n", addr);
+    DPRINTF("bonito_pciconf_readl "HWADDR_FMT_plx"\n", addr);
     return d->config_read(d, addr, 4);
 }
 
@@ -466,7 +466,7 @@ static uint32_t bonito_sbridge_pciaddr(void *opaque, hwaddr addr)
     regno = (cfgaddr & BONITO_PCICONF_REG_MASK_HW) >> BONITO_PCICONF_REG_OFFSET;
 
     if (idsel == 0) {
-        error_report("error in bonito pci config address 0x" TARGET_FMT_plx
+        error_report("error in bonito pci config address 0x" HWADDR_FMT_plx
                      ",pcimap_cfg=0x%x", addr, s->regs[BONITO_PCIMAP_CFG]);
         exit(1);
     }
@@ -486,7 +486,7 @@ static void bonito_spciconf_write(void *opaque, hwaddr addr, uint64_t val,
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_write "TARGET_FMT_plx" size %d val %lx\n",
+    DPRINTF("bonito_spciconf_write "HWADDR_FMT_plx" size %d val %lx\n",
             addr, size, val);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);
@@ -516,7 +516,7 @@ static uint64_t bonito_spciconf_read(void *opaque, hwaddr addr, unsigned size)
     uint32_t pciaddr;
     uint16_t status;
 
-    DPRINTF("bonito_spciconf_read "TARGET_FMT_plx" size %d\n", addr, size);
+    DPRINTF("bonito_spciconf_read "HWADDR_FMT_plx" size %d\n", addr, size);
 
     pciaddr = bonito_sbridge_pciaddr(s, addr);