hw/cxl/device: Add a memory device (8.2.8.5)

A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.

Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).

Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform.  The creation of these windows
is later in this series.

The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"

Note: Dropped PCDIMM info interfaces for now.  They can be added if
appropriate at a later date.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

3 files changed, 168 insertions, 0 deletions

diff --git a/hw/mem/Kconfig b/hw/mem/Kconfig
index 03dbb3c..73c5ae8 100644
--- a/hw/mem/Kconfig
+++ b/hw/mem/Kconfig
@@ -11,3 +11,8 @@ config NVDIMM
 
 config SPARSE_MEM
     bool
+
+config CXL_MEM_DEVICE
+    bool
+    default y if CXL
+    select MEM_DEVICE
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
new file mode 100644
index 0000000..290c088
--- /dev/null
+++ b/hw/mem/cxl_type3.c
@@ -0,0 +1,162 @@
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu/error-report.h"
+#include "hw/mem/memory-device.h"
+#include "hw/mem/pc-dimm.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/range.h"
+#include "qemu/rcu.h"
+#include "sysemu/hostmem.h"
+#include "hw/cxl/cxl.h"
+
+static void build_dvsecs(CXLType3Dev *ct3d)
+{
+    CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+    uint8_t *dvsec;
+
+    dvsec = (uint8_t *)&(CXLDVSECDevice){
+        .cap = 0x1e,
+        .ctrl = 0x2,
+        .status2 = 0x2,
+        .range1_size_hi = ct3d->hostmem->size >> 32,
+        .range1_size_lo = (2 << 5) | (2 << 2) | 0x3 |
+        (ct3d->hostmem->size & 0xF0000000),
+        .range1_base_hi = 0,
+        .range1_base_lo = 0,
+    };
+    cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+                               PCIE_CXL_DEVICE_DVSEC_LENGTH,
+                               PCIE_CXL_DEVICE_DVSEC,
+                               PCIE_CXL2_DEVICE_DVSEC_REVID, dvsec);
+
+    dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+        .rsvd         = 0,
+        .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+        .reg0_base_hi = 0,
+        .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX,
+        .reg1_base_hi = 0,
+    };
+    cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+                               REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+                               REG_LOC_DVSEC_REVID, dvsec);
+    dvsec = (uint8_t *)&(CXLDVSECDeviceGPF){
+        .phase2_duration = 0x603, /* 3 seconds */
+        .phase2_power = 0x33, /* 0x33 miliwatts */
+    };
+    cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE,
+                               GPF_DEVICE_DVSEC_LENGTH, GPF_PORT_DVSEC,
+                               GPF_DEVICE_DVSEC_REVID, dvsec);
+}
+
+static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
+{
+    MemoryRegion *mr;
+
+    if (!ct3d->hostmem) {
+        error_setg(errp, "memdev property must be set");
+        return false;
+    }
+
+    mr = host_memory_backend_get_memory(ct3d->hostmem);
+    if (!mr) {
+        error_setg(errp, "memdev property must be set");
+        return false;
+    }
+    memory_region_set_nonvolatile(mr, true);
+    memory_region_set_enabled(mr, true);
+    host_memory_backend_set_mapped(ct3d->hostmem, true);
+    ct3d->cxl_dstate.pmem_size = ct3d->hostmem->size;
+
+    return true;
+}
+
+static void ct3_realize(PCIDevice *pci_dev, Error **errp)
+{
+    CXLType3Dev *ct3d = CXL_TYPE3(pci_dev);
+    CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
+    ComponentRegisters *regs = &cxl_cstate->crb;
+    MemoryRegion *mr = &regs->component_registers;
+    uint8_t *pci_conf = pci_dev->config;
+
+    if (!cxl_setup_memory(ct3d, errp)) {
+        return;
+    }
+
+    pci_config_set_prog_interface(pci_conf, 0x10);
+    pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
+
+    pcie_endpoint_cap_init(pci_dev, 0x80);
+    cxl_cstate->dvsec_offset = 0x100;
+
+    ct3d->cxl_cstate.pdev = pci_dev;
+    build_dvsecs(ct3d);
+
+    cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+                                      TYPE_CXL_TYPE3);
+
+    pci_register_bar(
+        pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+        PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr);
+
+    cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate);
+    pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX,
+                     PCI_BASE_ADDRESS_SPACE_MEMORY |
+                         PCI_BASE_ADDRESS_MEM_TYPE_64,
+                     &ct3d->cxl_dstate.device_registers);
+}
+
+static void ct3d_reset(DeviceState *dev)
+{
+    CXLType3Dev *ct3d = CXL_TYPE3(dev);
+    uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+    uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+    cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
+    cxl_device_register_init_common(&ct3d->cxl_dstate);
+}
+
+static Property ct3_props[] = {
+    DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND,
+                     HostMemoryBackend *),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ct3_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+    PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
+
+    pc->realize = ct3_realize;
+    pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
+    pc->vendor_id = PCI_VENDOR_ID_INTEL;
+    pc->device_id = 0xd93; /* LVF for now */
+    pc->revision = 1;
+
+    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+    dc->desc = "CXL PMEM Device (Type 3)";
+    dc->reset = ct3d_reset;
+    device_class_set_props(dc, ct3_props);
+}
+
+static const TypeInfo ct3d_info = {
+    .name = TYPE_CXL_TYPE3,
+    .parent = TYPE_PCI_DEVICE,
+    .class_init = ct3_class_init,
+    .instance_size = sizeof(CXLType3Dev),
+    .interfaces = (InterfaceInfo[]) {
+        { INTERFACE_CXL_DEVICE },
+        { INTERFACE_PCIE_DEVICE },
+        {}
+    },
+};
+
+static void ct3d_registers(void)
+{
+    type_register_static(&ct3d_info);
+}
+
+type_init(ct3d_registers);
diff --git a/hw/mem/meson.build b/hw/mem/meson.build
index 82f86d1..609b2b3 100644
--- a/hw/mem/meson.build
+++ b/hw/mem/meson.build
@@ -3,6 +3,7 @@ mem_ss.add(files('memory-device.c'))
 mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
 mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
 mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
+mem_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_true: files('cxl_type3.c'))
 
 softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)