smbus: Add a helper to generate SPD EEPROM data

There are several boards with SPD EEPROMs that are now using
duplicated or slightly different hard coded data. Add a helper to
generate SPD data for a memory module of given type and size that
could be used by these boards (either as is or with further changes if
needed) which should help cleaning this up and avoid further duplication.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

1 files changed, 129 insertions, 0 deletions

diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c
index f18aa3d..01b9439 100644
--- a/hw/i2c/smbus_eeprom.c
+++ b/hw/i2c/smbus_eeprom.c
@@ -23,6 +23,8 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
 #include "hw/hw.h"
 #include "hw/i2c/i2c.h"
 #include "hw/i2c/smbus.h"
@@ -162,3 +164,130 @@ void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom,
         smbus_eeprom_init_one(smbus, 0x50 + i, eeprom_buf + (i * 256));
     }
 }
+
+/* Generate SDRAM SPD EEPROM data describing a module of type and size */
+uint8_t *spd_data_generate(enum sdram_type type, ram_addr_t ram_size,
+                           Error **errp)
+{
+    uint8_t *spd;
+    uint8_t nbanks;
+    uint16_t density;
+    uint32_t size;
+    int min_log2, max_log2, sz_log2;
+    int i;
+
+    switch (type) {
+    case SDR:
+        min_log2 = 2;
+        max_log2 = 9;
+        break;
+    case DDR:
+        min_log2 = 5;
+        max_log2 = 12;
+        break;
+    case DDR2:
+        min_log2 = 7;
+        max_log2 = 14;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+    size = ram_size >> 20; /* work in terms of megabytes */
+    if (size < 4) {
+        error_setg(errp, "SDRAM size is too small");
+        return NULL;
+    }
+    sz_log2 = 31 - clz32(size);
+    size = 1U << sz_log2;
+    if (ram_size > size * MiB) {
+        error_setg(errp, "SDRAM size 0x"RAM_ADDR_FMT" is not a power of 2, "
+                   "truncating to %u MB", ram_size, size);
+    }
+    if (sz_log2 < min_log2) {
+        error_setg(errp,
+                   "Memory size is too small for SDRAM type, adjusting type");
+        if (size >= 32) {
+            type = DDR;
+            min_log2 = 5;
+            max_log2 = 12;
+        } else {
+            type = SDR;
+            min_log2 = 2;
+            max_log2 = 9;
+        }
+    }
+
+    nbanks = 1;
+    while (sz_log2 > max_log2 && nbanks < 8) {
+        sz_log2--;
+        nbanks++;
+    }
+
+    if (size > (1ULL << sz_log2) * nbanks) {
+        error_setg(errp, "Memory size is too big for SDRAM, truncating");
+    }
+
+    /* split to 2 banks if possible to avoid a bug in MIPS Malta firmware */
+    if (nbanks == 1 && sz_log2 > min_log2) {
+        sz_log2--;
+        nbanks++;
+    }
+
+    density = 1ULL << (sz_log2 - 2);
+    switch (type) {
+    case DDR2:
+        density = (density & 0xe0) | (density >> 8 & 0x1f);
+        break;
+    case DDR:
+        density = (density & 0xf8) | (density >> 8 & 0x07);
+        break;
+    case SDR:
+    default:
+        density &= 0xff;
+        break;
+    }
+
+    spd = g_malloc0(256);
+    spd[0] = 128;   /* data bytes in EEPROM */
+    spd[1] = 8;     /* log2 size of EEPROM */
+    spd[2] = type;
+    spd[3] = 13;    /* row address bits */
+    spd[4] = 10;    /* column address bits */
+    spd[5] = (type == DDR2 ? nbanks - 1 : nbanks);
+    spd[6] = 64;    /* module data width */
+                    /* reserved / data width high */
+    spd[8] = 4;     /* interface voltage level */
+    spd[9] = 0x25;  /* highest CAS latency */
+    spd[10] = 1;    /* access time */
+                    /* DIMM configuration 0 = non-ECC */
+    spd[12] = 0x82; /* refresh requirements */
+    spd[13] = 8;    /* primary SDRAM width */
+                    /* ECC SDRAM width */
+    spd[15] = (type == DDR2 ? 0 : 1); /* reserved / delay for random col rd */
+    spd[16] = 12;   /* burst lengths supported */
+    spd[17] = 4;    /* banks per SDRAM device */
+    spd[18] = 12;   /* ~CAS latencies supported */
+    spd[19] = (type == DDR2 ? 0 : 1); /* reserved / ~CS latencies supported */
+    spd[20] = 2;    /* DIMM type / ~WE latencies */
+                    /* module features */
+                    /* memory chip features */
+    spd[23] = 0x12; /* clock cycle time @ medium CAS latency */
+                    /* data access time */
+                    /* clock cycle time @ short CAS latency */
+                    /* data access time */
+    spd[27] = 20;   /* min. row precharge time */
+    spd[28] = 15;   /* min. row active row delay */
+    spd[29] = 20;   /* min. ~RAS to ~CAS delay */
+    spd[30] = 45;   /* min. active to precharge time */
+    spd[31] = density;
+    spd[32] = 20;   /* addr/cmd setup time */
+    spd[33] = 8;    /* addr/cmd hold time */
+    spd[34] = 20;   /* data input setup time */
+    spd[35] = 8;    /* data input hold time */
+
+    /* checksum */
+    for (i = 0; i < 63; i++) {
+        spd[63] += spd[i];
+    }
+    return spd;
+}