hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 213 insertions, 0 deletions

diff --git a/hw/gpio/max7310.c b/hw/gpio/max7310.c
new file mode 100644
index 0000000..59b2877
--- /dev/null
+++ b/hw/gpio/max7310.c
@@ -0,0 +1,213 @@
+/*
+ * MAX7310 8-port GPIO expansion chip.
+ *
+ * Copyright (c) 2006 Openedhand Ltd.
+ * Written by Andrzej Zaborowski <balrog@zabor.org>
+ *
+ * This file is licensed under GNU GPL.
+ */
+
+#include "hw/i2c/i2c.h"
+
+typedef struct {
+    I2CSlave i2c;
+    int i2c_command_byte;
+    int len;
+
+    uint8_t level;
+    uint8_t direction;
+    uint8_t polarity;
+    uint8_t status;
+    uint8_t command;
+    qemu_irq handler[8];
+    qemu_irq *gpio_in;
+} MAX7310State;
+
+static void max7310_reset(DeviceState *dev)
+{
+    MAX7310State *s = FROM_I2C_SLAVE(MAX7310State, I2C_SLAVE(dev));
+    s->level &= s->direction;
+    s->direction = 0xff;
+    s->polarity = 0xf0;
+    s->status = 0x01;
+    s->command = 0x00;
+}
+
+static int max7310_rx(I2CSlave *i2c)
+{
+    MAX7310State *s = (MAX7310State *) i2c;
+
+    switch (s->command) {
+    case 0x00:	/* Input port */
+        return s->level ^ s->polarity;
+        break;
+
+    case 0x01:	/* Output port */
+        return s->level & ~s->direction;
+        break;
+
+    case 0x02:	/* Polarity inversion */
+        return s->polarity;
+
+    case 0x03:	/* Configuration */
+        return s->direction;
+
+    case 0x04:	/* Timeout */
+        return s->status;
+        break;
+
+    case 0xff:	/* Reserved */
+        return 0xff;
+
+    default:
+#ifdef VERBOSE
+        printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
+#endif
+        break;
+    }
+    return 0xff;
+}
+
+static int max7310_tx(I2CSlave *i2c, uint8_t data)
+{
+    MAX7310State *s = (MAX7310State *) i2c;
+    uint8_t diff;
+    int line;
+
+    if (s->len ++ > 1) {
+#ifdef VERBOSE
+        printf("%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
+#endif
+        return 1;
+    }
+
+    if (s->i2c_command_byte) {
+        s->command = data;
+        s->i2c_command_byte = 0;
+        return 0;
+    }
+
+    switch (s->command) {
+    case 0x01:	/* Output port */
+        for (diff = (data ^ s->level) & ~s->direction; diff;
+                        diff &= ~(1 << line)) {
+            line = ffs(diff) - 1;
+            if (s->handler[line])
+                qemu_set_irq(s->handler[line], (data >> line) & 1);
+        }
+        s->level = (s->level & s->direction) | (data & ~s->direction);
+        break;
+
+    case 0x02:	/* Polarity inversion */
+        s->polarity = data;
+        break;
+
+    case 0x03:	/* Configuration */
+        s->level &= ~(s->direction ^ data);
+        s->direction = data;
+        break;
+
+    case 0x04:	/* Timeout */
+        s->status = data;
+        break;
+
+    case 0x00:	/* Input port - ignore writes */
+	break;
+    default:
+#ifdef VERBOSE
+        printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
+#endif
+        return 1;
+    }
+
+    return 0;
+}
+
+static void max7310_event(I2CSlave *i2c, enum i2c_event event)
+{
+    MAX7310State *s = (MAX7310State *) i2c;
+    s->len = 0;
+
+    switch (event) {
+    case I2C_START_SEND:
+        s->i2c_command_byte = 1;
+        break;
+    case I2C_FINISH:
+#ifdef VERBOSE
+        if (s->len == 1)
+            printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
+#endif
+        break;
+    default:
+        break;
+    }
+}
+
+static const VMStateDescription vmstate_max7310 = {
+    .name = "max7310",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .minimum_version_id_old = 0,
+    .fields      = (VMStateField []) {
+        VMSTATE_INT32(i2c_command_byte, MAX7310State),
+        VMSTATE_INT32(len, MAX7310State),
+        VMSTATE_UINT8(level, MAX7310State),
+        VMSTATE_UINT8(direction, MAX7310State),
+        VMSTATE_UINT8(polarity, MAX7310State),
+        VMSTATE_UINT8(status, MAX7310State),
+        VMSTATE_UINT8(command, MAX7310State),
+        VMSTATE_I2C_SLAVE(i2c, MAX7310State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void max7310_gpio_set(void *opaque, int line, int level)
+{
+    MAX7310State *s = (MAX7310State *) opaque;
+    if (line >= ARRAY_SIZE(s->handler) || line  < 0)
+        hw_error("bad GPIO line");
+
+    if (level)
+        s->level |= s->direction & (1 << line);
+    else
+        s->level &= ~(s->direction & (1 << line));
+}
+
+/* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
+ * but also accepts sequences that are not SMBus so return an I2C device.  */
+static int max7310_init(I2CSlave *i2c)
+{
+    MAX7310State *s = FROM_I2C_SLAVE(MAX7310State, i2c);
+
+    qdev_init_gpio_in(&i2c->qdev, max7310_gpio_set, 8);
+    qdev_init_gpio_out(&i2c->qdev, s->handler, 8);
+
+    return 0;
+}
+
+static void max7310_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+    k->init = max7310_init;
+    k->event = max7310_event;
+    k->recv = max7310_rx;
+    k->send = max7310_tx;
+    dc->reset = max7310_reset;
+    dc->vmsd = &vmstate_max7310;
+}
+
+static const TypeInfo max7310_info = {
+    .name          = "max7310",
+    .parent        = TYPE_I2C_SLAVE,
+    .instance_size = sizeof(MAX7310State),
+    .class_init    = max7310_class_init,
+};
+
+static void max7310_register_types(void)
+{
+    type_register_static(&max7310_info);
+}
+
+type_init(max7310_register_types)