e1000: Fix wrong microwire EEPROM state initialization

This change fixes initialization of e1000's microwire EEPROM internal
state values so that qemu's e1000 emulation works on NetBSD,
which doesn't use Intel's em driver but has its own wm driver
for the Intel i8254x Gigabit Ethernet.

Previously set_eecd() function in e1000.c clears EEPROM internal state
values on SK rising edge during CS==L, but according to FM93C06 EEPROM
(which is MicroWire compatible) data sheet, EEPROM internal status
should be cleared on CS rise edge regardless of SK input:
 "... a rising edge on this (CS) signal is required to reset the internal
  state-machine to accept a new cycle .."
and nothing should be changed during CS (chip select) is inactive.

Intel's em driver seems to explicitly raise SK output after CS is negated
in em_standby_eeprom() so many other OSes that use Intel's driver
don't have this problem even on the previous e1000.c implementation,
but I can't find any articles that say the MICROWIRE or EEPROM spec
requires such sequence, and actually hardware works fine without it
(i.e. real i82540EM has been working on NetBSD).

This fix also changes initialization to clear each state value in
struct eecd_state individually rather than using memset() against
the whole structre. The old_eecd member stores the last SK and CS
signal levels and it should be preserved even after reset of internal
EEPROM state to detect next signal edges for proper EEPROM emulation.

Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

1 files changed, 8 insertions, 9 deletions

diff --git a/hw/e1000.c b/hw/e1000.c
index 0da65f9..db9143d 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -262,21 +262,20 @@ set_eecd(E1000State *s, int index, uint32_t val)
 
     s->eecd_state.old_eecd = val & (E1000_EECD_SK | E1000_EECD_CS |
             E1000_EECD_DI|E1000_EECD_FWE_MASK|E1000_EECD_REQ);
+    if (!(E1000_EECD_CS & val))			// CS inactive; nothing to do
+	return;
+    if (E1000_EECD_CS & (val ^ oldval)) {	// CS rise edge; reset state
+	s->eecd_state.val_in = 0;
+	s->eecd_state.bitnum_in = 0;
+	s->eecd_state.bitnum_out = 0;
+	s->eecd_state.reading = 0;
+    }
     if (!(E1000_EECD_SK & (val ^ oldval)))	// no clock edge
         return;
     if (!(E1000_EECD_SK & val)) {		// falling edge
         s->eecd_state.bitnum_out++;
         return;
     }
-    if (!(val & E1000_EECD_CS)) {		// rising, no CS (EEPROM reset)
-        memset(&s->eecd_state, 0, sizeof s->eecd_state);
-        /*
-         * restore old_eecd's E1000_EECD_SK (known to be on)
-         * to avoid false detection of a clock edge
-         */
-        s->eecd_state.old_eecd = E1000_EECD_SK;
-        return;
-    }
     s->eecd_state.val_in <<= 1;
     if (val & E1000_EECD_DI)
         s->eecd_state.val_in |= 1;