e1000: Mask out lower bits of RDBAL/TDBAL

Rx and Tx descriptors are 16 byte aligned, so the lower bits are
ignored by real hardware. In fact, they always read back as zero on real
hardware, but probably nobody relies on that.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

1 files changed, 18 insertions, 3 deletions

diff --git a/hw/e1000.c b/hw/e1000.c
index 55daae0..fe3e812 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -517,6 +517,14 @@ txdesc_writeback(target_phys_addr_t base, struct e1000_tx_desc *dp)
     return E1000_ICR_TXDW;
 }
 
+static uint64_t tx_desc_base(E1000State *s)
+{
+    uint64_t bah = s->mac_reg[TDBAH];
+    uint64_t bal = s->mac_reg[TDBAL] & ~0xf;
+
+    return (bah << 32) + bal;
+}
+
 static void
 start_xmit(E1000State *s)
 {
@@ -530,7 +538,7 @@ start_xmit(E1000State *s)
     }
 
     while (s->mac_reg[TDH] != s->mac_reg[TDT]) {
-        base = ((uint64_t)s->mac_reg[TDBAH] << 32) + s->mac_reg[TDBAL] +
+        base = tx_desc_base(s) +
                sizeof(struct e1000_tx_desc) * s->mac_reg[TDH];
         cpu_physical_memory_read(base, (void *)&desc, sizeof(desc));
 
@@ -651,6 +659,14 @@ e1000_can_receive(VLANClientState *nc)
     return (s->mac_reg[RCTL] & E1000_RCTL_EN) && e1000_has_rxbufs(s, 1);
 }
 
+static uint64_t rx_desc_base(E1000State *s)
+{
+    uint64_t bah = s->mac_reg[RDBAH];
+    uint64_t bal = s->mac_reg[RDBAL] & ~0xf;
+
+    return (bah << 32) + bal;
+}
+
 static ssize_t
 e1000_receive(VLANClientState *nc, const uint8_t *buf, size_t size)
 {
@@ -700,8 +716,7 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf, size_t size)
         if (desc_size > s->rxbuf_size) {
             desc_size = s->rxbuf_size;
         }
-        base = ((uint64_t)s->mac_reg[RDBAH] << 32) + s->mac_reg[RDBAL] +
-               sizeof(desc) * s->mac_reg[RDH];
+        base = rx_desc_base(s) + sizeof(desc) * s->mac_reg[RDH];
         cpu_physical_memory_read(base, (void *)&desc, sizeof(desc));
         desc.special = vlan_special;
         desc.status |= (vlan_status | E1000_RXD_STAT_DD);