char: avoid chardevice direct access

frontends should avoid accessing CharDriver struct where possible

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

15 files changed, 18 insertions, 19 deletions

diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 3a9335c..6143494 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -279,7 +279,7 @@ static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
     int ret;
 
     /* instant drain the fifo when there's no back-end */
-    if (!qemu_chr_fe_get_driver(&s->chr)) {
+    if (!qemu_chr_fe_backend_connected(&s->chr)) {
         s->tx_count = 0;
         return FALSE;
     }
diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c
index 9b56fb8..95ccec6 100644
--- a/hw/char/debugcon.c
+++ b/hw/char/debugcon.c
@@ -87,7 +87,7 @@ static const MemoryRegionOps debugcon_ops = {
 
 static void debugcon_realize_core(DebugconState *s, Error **errp)
 {
-    if (!qemu_chr_fe_get_driver(&s->chr)) {
+    if (!qemu_chr_fe_backend_connected(&s->chr)) {
         error_setg(errp, "Can't create debugcon device, empty char device");
         return;
     }
diff --git a/hw/char/escc.c b/hw/char/escc.c
index 3546df3..89ae9eb 100644
--- a/hw/char/escc.c
+++ b/hw/char/escc.c
@@ -417,7 +417,7 @@ static void escc_update_parameters(ChannelState *s)
     int speed, parity, data_bits, stop_bits;
     QEMUSerialSetParams ssp;
 
-    if (!qemu_chr_fe_get_driver(&s->chr) || s->type != ser)
+    if (!qemu_chr_fe_backend_connected(&s->chr) || s->type != ser)
         return;
 
     if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) {
@@ -557,7 +557,7 @@ static void escc_mem_write(void *opaque, hwaddr addr,
         trace_escc_mem_writeb_data(CHN_C(s), val);
         s->tx = val;
         if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled
-            if (qemu_chr_fe_get_driver(&s->chr)) {
+            if (qemu_chr_fe_backend_connected(&s->chr)) {
                 /* XXX this blocks entire thread. Rewrite to use
                  * qemu_chr_fe_write and background I/O callbacks */
                 qemu_chr_fe_write_all(&s->chr, &s->tx, 1);
@@ -1013,7 +1013,7 @@ static void escc_realize(DeviceState *dev, Error **errp)
                           ESCC_SIZE << s->it_shift);
 
     for (i = 0; i < 2; i++) {
-        if (qemu_chr_fe_get_driver(&s->chn[i].chr)) {
+        if (qemu_chr_fe_backend_connected(&s->chn[i].chr)) {
             s->chn[i].clock = s->frequency / 2;
             qemu_chr_fe_set_handlers(&s->chn[i].chr, serial_can_receive,
                                      serial_receive1, serial_event, NULL,
diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c
index a84d2c3..3957e78 100644
--- a/hw/char/exynos4210_uart.c
+++ b/hw/char/exynos4210_uart.c
@@ -380,7 +380,7 @@ static void exynos4210_uart_write(void *opaque, hwaddr offset,
         break;
 
     case UTXH:
-        if (qemu_chr_fe_get_driver(&s->chr)) {
+        if (qemu_chr_fe_backend_connected(&s->chr)) {
             s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
                     UTRSTAT_Tx_BUFFER_EMPTY);
             ch = (uint8_t)val;
diff --git a/hw/char/grlib_apbuart.c b/hw/char/grlib_apbuart.c
index 12d0c99..bac11be 100644
--- a/hw/char/grlib_apbuart.c
+++ b/hw/char/grlib_apbuart.c
@@ -201,7 +201,7 @@ static void grlib_apbuart_write(void *opaque, hwaddr addr,
     case DATA_OFFSET:
     case DATA_OFFSET + 3:       /* When only one byte write */
         /* Transmit when character device available and transmitter enabled */
-        if (qemu_chr_fe_get_driver(&uart->chr) &&
+        if (qemu_chr_fe_backend_connected(&uart->chr) &&
             (uart->control & UART_TRANSMIT_ENABLE)) {
             c = value & 0xFF;
             /* XXX this blocks entire thread. Rewrite to use
diff --git a/hw/char/ipoctal232.c b/hw/char/ipoctal232.c
index cc8c8dc..5e09caf 100644
--- a/hw/char/ipoctal232.c
+++ b/hw/char/ipoctal232.c
@@ -542,7 +542,7 @@ static void ipoctal_realize(DeviceState *dev, Error **errp)
         ch->ipoctal = s;
 
         /* Redirect IP-Octal channels to host character devices */
-        if (qemu_chr_fe_get_driver(&ch->dev)) {
+        if (qemu_chr_fe_backend_connected(&ch->dev)) {
             qemu_chr_fe_set_handlers(&ch->dev, hostdev_can_receive,
                                      hostdev_receive, hostdev_event,
                                      NULL, ch, NULL, true);
diff --git a/hw/char/parallel.c b/hw/char/parallel.c
index 75a1a2f..055789f 100644
--- a/hw/char/parallel.c
+++ b/hw/char/parallel.c
@@ -513,7 +513,7 @@ static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
     int base;
     uint8_t dummy;
 
-    if (!qemu_chr_fe_get_driver(&s->chr)) {
+    if (!qemu_chr_fe_backend_connected(&s->chr)) {
         error_setg(errp, "Can't create parallel device, empty char device");
         return;
     }
diff --git a/hw/char/sclpconsole-lm.c b/hw/char/sclpconsole-lm.c
index 741c641..c500bda 100644
--- a/hw/char/sclpconsole-lm.c
+++ b/hw/char/sclpconsole-lm.c
@@ -195,7 +195,7 @@ static int write_console_data(SCLPEvent *event, const uint8_t *buf, int len)
 {
     SCLPConsoleLM *scon = SCLPLM_CONSOLE(event);
 
-    if (!qemu_chr_fe_get_driver(&scon->chr)) {
+    if (!qemu_chr_fe_backend_connected(&scon->chr)) {
         /* If there's no backend, we can just say we consumed all data. */
         return len;
     }
diff --git a/hw/char/sclpconsole.c b/hw/char/sclpconsole.c
index a92baa8..d0265df 100644
--- a/hw/char/sclpconsole.c
+++ b/hw/char/sclpconsole.c
@@ -163,7 +163,7 @@ static ssize_t write_console_data(SCLPEvent *event, const uint8_t *buf,
 {
     SCLPConsole *scon = SCLP_CONSOLE(event);
 
-    if (!qemu_chr_fe_get_driver(&scon->chr)) {
+    if (!qemu_chr_fe_backend_connected(&scon->chr)) {
         /* If there's no backend, we can just say we consumed all data. */
         return len;
     }
diff --git a/hw/char/serial.c b/hw/char/serial.c
index ab14ca4..b4fb8f3 100644
--- a/hw/char/serial.c
+++ b/hw/char/serial.c
@@ -886,7 +886,7 @@ static void serial_reset(void *opaque)
 
 void serial_realize_core(SerialState *s, Error **errp)
 {
-    if (!qemu_chr_fe_get_driver(&s->chr)) {
+    if (!qemu_chr_fe_backend_connected(&s->chr)) {
         error_setg(errp, "Can't create serial device, empty char device");
         return;
     }
diff --git a/hw/char/sh_serial.c b/hw/char/sh_serial.c
index ad043bd..835b537 100644
--- a/hw/char/sh_serial.c
+++ b/hw/char/sh_serial.c
@@ -110,7 +110,7 @@ static void sh_serial_write(void *opaque, hwaddr offs,
         }
         return;
     case 0x0c: /* FTDR / TDR */
-        if (qemu_chr_fe_get_driver(&s->chr)) {
+        if (qemu_chr_fe_backend_connected(&s->chr)) {
             ch = val;
             /* XXX this blocks entire thread. Rewrite to use
              * qemu_chr_fe_write and background I/O callbacks */
diff --git a/hw/char/spapr_vty.c b/hw/char/spapr_vty.c
index ddd1b00..0fa416c 100644
--- a/hw/char/spapr_vty.c
+++ b/hw/char/spapr_vty.c
@@ -78,7 +78,7 @@ static void spapr_vty_realize(VIOsPAPRDevice *sdev, Error **errp)
 {
     VIOsPAPRVTYDevice *dev = VIO_SPAPR_VTY_DEVICE(sdev);
 
-    if (!qemu_chr_fe_get_driver(&dev->chardev)) {
+    if (!qemu_chr_fe_backend_connected(&dev->chardev)) {
         error_setg(errp, "chardev property not set");
         return;
     }
diff --git a/hw/char/terminal3270.c b/hw/char/terminal3270.c
index 5adf95b..28f5991 100644
--- a/hw/char/terminal3270.c
+++ b/hw/char/terminal3270.c
@@ -239,7 +239,7 @@ static int write_payload_3270(EmulatedCcw3270Device *dev, uint8_t cmd,
             return 0;
         }
     }
-    if (!qemu_chr_fe_get_driver(&t->chr)) {
+    if (!qemu_chr_fe_backend_connected(&t->chr)) {
         /* We just say we consumed all data if there's no backend. */
         return count;
     }
diff --git a/hw/char/virtio-console.c b/hw/char/virtio-console.c
index afb4949..4d3967c 100644
--- a/hw/char/virtio-console.c
+++ b/hw/char/virtio-console.c
@@ -49,7 +49,7 @@ static ssize_t flush_buf(VirtIOSerialPort *port,
     VirtConsole *vcon = VIRTIO_CONSOLE(port);
     ssize_t ret;
 
-    if (!qemu_chr_fe_get_driver(&vcon->chr)) {
+    if (!qemu_chr_fe_backend_connected(&vcon->chr)) {
         /* If there's no backend, we can just say we consumed all data. */
         return len;
     }
@@ -168,7 +168,6 @@ static void virtconsole_realize(DeviceState *dev, Error **errp)
     VirtIOSerialPort *port = VIRTIO_SERIAL_PORT(dev);
     VirtConsole *vcon = VIRTIO_CONSOLE(dev);
     VirtIOSerialPortClass *k = VIRTIO_SERIAL_PORT_GET_CLASS(dev);
-    Chardev *chr = qemu_chr_fe_get_driver(&vcon->chr);
 
     if (port->id == 0 && !k->is_console) {
         error_setg(errp, "Port number 0 on virtio-serial devices reserved "
@@ -176,7 +175,7 @@ static void virtconsole_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    if (chr) {
+    if (qemu_chr_fe_backend_connected(&vcon->chr)) {
         /*
          * For consoles we don't block guest data transfer just
          * because nothing is connected - we'll just let it go
diff --git a/hw/char/xen_console.c b/hw/char/xen_console.c
index c4e8c72..3643dfe 100644
--- a/hw/char/xen_console.c
+++ b/hw/char/xen_console.c
@@ -150,7 +150,7 @@ static void xencons_send(struct XenConsole *con)
     ssize_t len, size;
 
     size = con->buffer.size - con->buffer.consumed;
-    if (qemu_chr_fe_get_driver(&con->chr)) {
+    if (qemu_chr_fe_backend_connected(&con->chr)) {
         len = qemu_chr_fe_write(&con->chr,
                                 con->buffer.data + con->buffer.consumed,
                                 size);