hw/arm/bcm2836: Make the SoC code modular

This file creates the BCM2836/BCM2837 blocks.
The biggest differences with the BCM2838 we are going to add, are
the base addresses of the interrupt controller and the peripherals.
Add these addresses in the BCM283XInfo structure to make this
block more modular. Remove the MCORE_OFFSET offset as it is
not useful and rather confusing.

Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 9 insertions, 9 deletions

diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 723aef6..019e67b 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -16,15 +16,11 @@
 #include "hw/arm/raspi_platform.h"
 #include "hw/sysbus.h"
 
-/* Peripheral base address seen by the CPU */
-#define BCM2836_PERI_BASE       0x3F000000
-
-/* "QA7" (Pi2) interrupt controller and mailboxes etc. */
-#define BCM2836_CONTROL_BASE    0x40000000
-
 struct BCM283XInfo {
     const char *name;
     const char *cpu_type;
+    hwaddr peri_base; /* Peripheral base address seen by the CPU */
+    hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */
     int clusterid;
 };
 
@@ -32,12 +28,16 @@ static const BCM283XInfo bcm283x_socs[] = {
     {
         .name = TYPE_BCM2836,
         .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"),
+        .peri_base = 0x3f000000,
+        .ctrl_base = 0x40000000,
         .clusterid = 0xf,
     },
 #ifdef TARGET_AARCH64
     {
         .name = TYPE_BCM2837,
         .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"),
+        .peri_base = 0x3f000000,
+        .ctrl_base = 0x40000000,
         .clusterid = 0x0,
     },
 #endif
@@ -104,7 +104,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
     }
 
     sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
-                            BCM2836_PERI_BASE, 1);
+                            info->peri_base, 1);
 
     /* bcm2836 interrupt controller (and mailboxes, etc.) */
     object_property_set_bool(OBJECT(&s->control), true, "realized", &err);
@@ -113,7 +113,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, BCM2836_CONTROL_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base);
 
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
         qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
@@ -126,7 +126,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
 
         /* set periphbase/CBAR value for CPU-local registers */
         object_property_set_int(OBJECT(&s->cpus[n]),
-                                BCM2836_PERI_BASE + MSYNC_OFFSET,
+                                info->peri_base,
                                 "reset-cbar", &err);
         if (err) {
             error_propagate(errp, err);