*.hx: Remove all the STEXI/ETEXI blocks

We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.

This commit was created using the following Perl one-liner:
  perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 0 insertions, 821 deletions

diff --git a/hmp-commands.hx b/hmp-commands.hx
index 9aa59f5..eb3d160 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -5,9 +5,6 @@ HXCOMM DEF(command, args, callback, arg_string, help) is used to construct
 HXCOMM monitor commands
 HXCOMM HXCOMM can be used for comments, discarded from both texi and C
 
-STEXI
-@table @option
-ETEXI
 
     {
         .name       = "help|?",
@@ -18,11 +15,6 @@ ETEXI
         .flags      = "p",
     },
 
-STEXI
-@item help or ? [@var{cmd}]
-@findex help
-Show the help for all commands or just for command @var{cmd}.
-ETEXI
 SRST
 ``help`` or ``?`` [*cmd*]
   Show the help for all commands or just for command *cmd*.
@@ -36,16 +28,6 @@ ERST
         .cmd        = hmp_commit,
     },
 
-STEXI
-@item commit
-@findex commit
-Commit changes to the disk images (if -snapshot is used) or backing files.
-If the backing file is smaller than the snapshot, then the backing file will be
-resized to be the same size as the snapshot.  If the snapshot is smaller than
-the backing file, the backing file will not be truncated.  If you want the
-backing file to match the size of the smaller snapshot, you can safely truncate
-it yourself once the commit operation successfully completes.
-ETEXI
 SRST
 ``commit``
   Commit changes to the disk images (if -snapshot is used) or backing files.
@@ -65,11 +47,6 @@ ERST
         .cmd        = hmp_quit,
     },
 
-STEXI
-@item q or quit
-@findex quit
-Quit the emulator.
-ETEXI
 SRST
 ``q`` or ``quit``
   Quit the emulator.
@@ -84,15 +61,6 @@ ERST
         .flags      = "p",
     },
 
-STEXI
-@item exit_preconfig
-@findex exit_preconfig
-This command makes QEMU exit the preconfig state and proceed with
-VM initialization using configuration data provided on the command line
-and via the QMP monitor during the preconfig state. The command is only
-available during the preconfig state (i.e. when the --preconfig command
-line option was in use).
-ETEXI
 SRST
 ``exit_preconfig``
   This command makes QEMU exit the preconfig state and proceed with
@@ -110,14 +78,6 @@ ERST
         .cmd        = hmp_block_resize,
     },
 
-STEXI
-@item block_resize
-@findex block_resize
-Resize a block image while a guest is running.  Usually requires guest
-action to see the updated size.  Resize to a lower size is supported,
-but should be used with extreme caution.  Note that this command only
-resizes image files, it can not resize block devices like LVM volumes.
-ETEXI
 SRST
 ``block_resize``
   Resize a block image while a guest is running.  Usually requires guest
@@ -134,11 +94,6 @@ ERST
         .cmd        = hmp_block_stream,
     },
 
-STEXI
-@item block_stream
-@findex block_stream
-Copy data from a backing file into a block device.
-ETEXI
 SRST
 ``block_stream``
   Copy data from a backing file into a block device.
@@ -152,11 +107,6 @@ ERST
         .cmd        = hmp_block_job_set_speed,
     },
 
-STEXI
-@item block_job_set_speed
-@findex block_job_set_speed
-Set maximum speed for a background block operation.
-ETEXI
 SRST
 ``block_job_set_speed``
   Set maximum speed for a background block operation.
@@ -172,11 +122,6 @@ ERST
         .cmd        = hmp_block_job_cancel,
     },
 
-STEXI
-@item block_job_cancel
-@findex block_job_cancel
-Stop an active background block operation (streaming, mirroring).
-ETEXI
 SRST
 ``block_job_cancel``
   Stop an active background block operation (streaming, mirroring).
@@ -190,12 +135,6 @@ ERST
         .cmd        = hmp_block_job_complete,
     },
 
-STEXI
-@item block_job_complete
-@findex block_job_complete
-Manually trigger completion of an active background block operation.
-For mirroring, this will switch the device to the destination path.
-ETEXI
 SRST
 ``block_job_complete``
   Manually trigger completion of an active background block operation.
@@ -210,11 +149,6 @@ ERST
         .cmd        = hmp_block_job_pause,
     },
 
-STEXI
-@item block_job_pause
-@findex block_job_pause
-Pause an active block streaming operation.
-ETEXI
 SRST
 ``block_job_pause``
   Pause an active block streaming operation.
@@ -228,11 +162,6 @@ ERST
         .cmd        = hmp_block_job_resume,
     },
 
-STEXI
-@item block_job_resume
-@findex block_job_resume
-Resume a paused block streaming operation.
-ETEXI
 SRST
 ``block_job_resume``
   Resume a paused block streaming operation.
@@ -246,11 +175,6 @@ ERST
         .cmd        = hmp_eject,
     },
 
-STEXI
-@item eject [-f] @var{device}
-@findex eject
-Eject a removable medium (use -f to force it).
-ETEXI
 SRST
 ``eject [-f]`` *device*
   Eject a removable medium (use -f to force it).
@@ -264,16 +188,6 @@ ERST
         .cmd        = hmp_drive_del,
     },
 
-STEXI
-@item drive_del @var{device}
-@findex drive_del
-Remove host block device.  The result is that guest generated IO is no longer
-submitted against the host device underlying the disk.  Once a drive has
-been deleted, the QEMU Block layer returns -EIO which results in IO
-errors in the guest for applications that are reading/writing to the device.
-These errors are always reported to the guest, regardless of the drive's error
-actions (drive options rerror, werror).
-ETEXI
 SRST
 ``drive_del`` *device*
   Remove host block device.  The result is that guest generated IO is no longer
@@ -292,56 +206,6 @@ ERST
         .cmd        = hmp_change,
     },
 
-STEXI
-@item change @var{device} @var{setting}
-@findex change
-Change the configuration of a device.
-
-@table @option
-@item change @var{diskdevice} @var{filename} [@var{format} [@var{read-only-mode}]]
-Change the medium for a removable disk device to point to @var{filename}. eg
-
-@example
-(qemu) change ide1-cd0 /path/to/some.iso
-@end example
-
-@var{format} is optional.
-
-@var{read-only-mode} may be used to change the read-only status of the device.
-It accepts the following values:
-
-@table @var
-@item retain
-Retains the current status; this is the default.
-
-@item read-only
-Makes the device read-only.
-
-@item read-write
-Makes the device writable.
-@end table
-
-@item change vnc @var{display},@var{options}
-Change the configuration of the VNC server. The valid syntax for @var{display}
-and @var{options} are described at @ref{sec_invocation}. eg
-
-@example
-(qemu) change vnc localhost:1
-@end example
-
-@item change vnc password [@var{password}]
-
-Change the password associated with the VNC server. If the new password is not
-supplied, the monitor will prompt for it to be entered. VNC passwords are only
-significant up to 8 letters. eg
-
-@example
-(qemu) change vnc password
-Password: ********
-@end example
-
-@end table
-ETEXI
 SRST
 ``change`` *device* *setting*
   Change the configuration of a device.
@@ -391,11 +255,6 @@ ERST
         .cmd        = hmp_screendump,
     },
 
-STEXI
-@item screendump @var{filename}
-@findex screendump
-Save screen into PPM image @var{filename}.
-ETEXI
 SRST
 ``screendump`` *filename*
   Save screen into PPM image *filename*.
@@ -409,11 +268,6 @@ ERST
         .cmd        = hmp_logfile,
     },
 
-STEXI
-@item logfile @var{filename}
-@findex logfile
-Output logs to @var{filename}.
-ETEXI
 SRST
 ``logfile`` *filename*
   Output logs to *filename*.
@@ -429,11 +283,6 @@ ERST
         .command_completion = trace_event_completion,
     },
 
-STEXI
-@item trace-event
-@findex trace-event
-changes status of a trace event
-ETEXI
 SRST
 ``trace-event``
   changes status of a trace event
@@ -448,11 +297,6 @@ ERST
         .cmd        = hmp_trace_file,
     },
 
-STEXI
-@item trace-file on|off|flush
-@findex trace-file
-Open, close, or flush the trace file.  If no argument is given, the status of the trace file is displayed.
-ETEXI
 SRST
 ``trace-file on|off|flush``
   Open, close, or flush the trace file.  If no argument is given, the
@@ -468,11 +312,6 @@ ERST
         .cmd        = hmp_log,
     },
 
-STEXI
-@item log @var{item1}[,...]
-@findex log
-Activate logging of the specified items.
-ETEXI
 SRST
 ``log`` *item1*\ [,...]
   Activate logging of the specified items.
@@ -486,17 +325,6 @@ ERST
         .cmd        = hmp_savevm,
     },
 
-STEXI
-@item savevm @var{tag}
-@findex savevm
-Create a snapshot of the whole virtual machine. If @var{tag} is
-provided, it is used as human readable identifier. If there is already
-a snapshot with the same tag, it is replaced. More info at
-@ref{vm_snapshots}.
-
-Since 4.0, savevm stopped allowing the snapshot id to be set, accepting
-only @var{tag} as parameter.
-ETEXI
 SRST
 ``savevm`` *tag*
   Create a snapshot of the whole virtual machine. If *tag* is
@@ -517,14 +345,6 @@ ERST
         .command_completion = loadvm_completion,
     },
 
-STEXI
-@item loadvm @var{tag}
-@findex loadvm
-Set the whole virtual machine to the snapshot identified by the tag
-@var{tag}.
-
-Since 4.0, loadvm stopped accepting snapshot id as parameter.
-ETEXI
 SRST
 ``loadvm`` *tag*
   Set the whole virtual machine to the snapshot identified by the tag
@@ -542,14 +362,6 @@ ERST
         .command_completion = delvm_completion,
     },
 
-STEXI
-@item delvm @var{tag}
-@findex delvm
-Delete the snapshot identified by @var{tag}.
-
-Since 4.0, delvm stopped deleting snapshots by snapshot id, accepting
-only @var{tag} as parameter.
-ETEXI
 SRST
 ``delvm`` *tag*
   Delete the snapshot identified by *tag*.
@@ -566,12 +378,6 @@ ERST
         .cmd        = hmp_singlestep,
     },
 
-STEXI
-@item singlestep [off]
-@findex singlestep
-Run the emulation in single step mode.
-If called with option off, the emulation returns to normal mode.
-ETEXI
 SRST
 ``singlestep [off]``
   Run the emulation in single step mode.
@@ -586,11 +392,6 @@ ERST
         .cmd        = hmp_stop,
     },
 
-STEXI
-@item stop
-@findex stop
-Stop emulation.
-ETEXI
 SRST
 ``stop``
   Stop emulation.
@@ -604,11 +405,6 @@ ERST
         .cmd        = hmp_cont,
     },
 
-STEXI
-@item c or cont
-@findex cont
-Resume emulation.
-ETEXI
 SRST
 ``c`` or ``cont``
   Resume emulation.
@@ -622,11 +418,6 @@ ERST
         .cmd        = hmp_system_wakeup,
     },
 
-STEXI
-@item system_wakeup
-@findex system_wakeup
-Wakeup guest from suspend.
-ETEXI
 SRST
 ``system_wakeup``
   Wakeup guest from suspend.
@@ -640,11 +431,6 @@ ERST
         .cmd        = hmp_gdbserver,
     },
 
-STEXI
-@item gdbserver [@var{port}]
-@findex gdbserver
-Start gdbserver session (default @var{port}=1234)
-ETEXI
 SRST
 ``gdbserver`` [*port*]
   Start gdbserver session (default *port*\=1234)
@@ -658,11 +444,6 @@ ERST
         .cmd        = hmp_memory_dump,
     },
 
-STEXI
-@item x/fmt @var{addr}
-@findex x
-Virtual memory dump starting at @var{addr}.
-ETEXI
 SRST
 ``x/``\ *fmt* *addr*
   Virtual memory dump starting at *addr*.
@@ -676,64 +457,6 @@ ERST
         .cmd        = hmp_physical_memory_dump,
     },
 
-STEXI
-@item xp /@var{fmt} @var{addr}
-@findex xp
-Physical memory dump starting at @var{addr}.
-
-@var{fmt} is a format which tells the command how to format the
-data. Its syntax is: @option{/@{count@}@{format@}@{size@}}
-
-@table @var
-@item count
-is the number of items to be dumped.
-
-@item format
-can be x (hex), d (signed decimal), u (unsigned decimal), o (octal),
-c (char) or i (asm instruction).
-
-@item size
-can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86,
-@code{h} or @code{w} can be specified with the @code{i} format to
-respectively select 16 or 32 bit code instruction size.
-
-@end table
-
-Examples:
-@itemize
-@item
-Dump 10 instructions at the current instruction pointer:
-@example
-(qemu) x/10i $eip
-0x90107063:  ret
-0x90107064:  sti
-0x90107065:  lea    0x0(%esi,1),%esi
-0x90107069:  lea    0x0(%edi,1),%edi
-0x90107070:  ret
-0x90107071:  jmp    0x90107080
-0x90107073:  nop
-0x90107074:  nop
-0x90107075:  nop
-0x90107076:  nop
-@end example
-
-@item
-Dump 80 16 bit values at the start of the video memory.
-@smallexample
-(qemu) xp/80hx 0xb8000
-0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42
-0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41
-0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72
-0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73
-0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20
-0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720
-0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-@end smallexample
-@end itemize
-ETEXI
 SRST
 ``xp /``\ *fmt* *addr*
   Physical memory dump starting at *addr*.
@@ -791,12 +514,6 @@ ERST
         .cmd        = hmp_gpa2hva,
     },
 
-STEXI
-@item gpa2hva @var{addr}
-@findex gpa2hva
-Print the host virtual address at which the guest's physical address @var{addr}
-is mapped.
-ETEXI
 SRST
 ``gpa2hva`` *addr*
   Print the host virtual address at which the guest's physical address *addr*
@@ -813,12 +530,6 @@ ERST
     },
 #endif
 
-STEXI
-@item gpa2hpa @var{addr}
-@findex gpa2hpa
-Print the host physical address at which the guest's physical address @var{addr}
-is mapped.
-ETEXI
 SRST
 ``gpa2hpa`` *addr*
   Print the host physical address at which the guest's physical address *addr*
@@ -833,12 +544,6 @@ ERST
         .cmd        = hmp_gva2gpa,
     },
 
-STEXI
-@item gva2gpa @var{addr}
-@findex gva2gpa
-Print the guest physical address at which the guest's virtual address @var{addr}
-is mapped based on the mapping for the current CPU.
-ETEXI
 SRST
 ``gva2gpa`` *addr*
   Print the guest physical address at which the guest's virtual address *addr*
@@ -853,12 +558,6 @@ ERST
         .cmd        = do_print,
     },
 
-STEXI
-@item p or print/@var{fmt} @var{expr}
-@findex print
-Print expression value. Only the @var{format} part of @var{fmt} is
-used.
-ETEXI
 SRST
 ``p`` or ``print/``\ *fmt* *expr*
   Print expression value. Only the *format* part of *fmt* is
@@ -873,11 +572,6 @@ ERST
         .cmd        = hmp_ioport_read,
     },
 
-STEXI
-@item i/@var{fmt} @var{addr} [.@var{index}]
-@findex i
-Read I/O port.
-ETEXI
 SRST
 ``i/``\ *fmt* *addr* [.\ *index*\ ]
   Read I/O port.
@@ -891,11 +585,6 @@ ERST
         .cmd        = hmp_ioport_write,
     },
 
-STEXI
-@item o/@var{fmt} @var{addr} @var{val}
-@findex o
-Write to I/O port.
-ETEXI
 SRST
 ``o/``\ *fmt* *addr* *val*
   Write to I/O port.
@@ -910,19 +599,6 @@ ERST
         .command_completion = sendkey_completion,
     },
 
-STEXI
-@item sendkey @var{keys}
-@findex sendkey
-Send @var{keys} to the guest. @var{keys} could be the name of the
-key or the raw value in hexadecimal format. Use @code{-} to press
-several keys simultaneously. Example:
-@example
-sendkey ctrl-alt-f1
-@end example
-
-This command is useful to send keys that your graphical user interface
-intercepts at low level, such as @code{ctrl-alt-f1} in X Window.
-ETEXI
 SRST
 ``sendkey`` *keys*
   Send *keys* to the guest. *keys* could be the name of the
@@ -943,12 +619,6 @@ ERST
         .cmd        = hmp_sync_profile,
     },
 
-STEXI
-@item sync-profile [on|off|reset]
-@findex sync-profile
-Enable, disable or reset synchronization profiling. With no arguments, prints
-whether profiling is on or off.
-ETEXI
 SRST
 ``sync-profile [on|off|reset]``
   Enable, disable or reset synchronization profiling. With no arguments, prints
@@ -963,11 +633,6 @@ ERST
         .cmd        = hmp_system_reset,
     },
 
-STEXI
-@item system_reset
-@findex system_reset
-Reset the system.
-ETEXI
 SRST
 ``system_reset``
   Reset the system.
@@ -981,11 +646,6 @@ ERST
         .cmd        = hmp_system_powerdown,
     },
 
-STEXI
-@item system_powerdown
-@findex system_powerdown
-Power down the system (if supported).
-ETEXI
 SRST
 ``system_powerdown``
   Power down the system (if supported).
@@ -999,11 +659,6 @@ ERST
         .cmd        = hmp_sum,
     },
 
-STEXI
-@item sum @var{addr} @var{size}
-@findex sum
-Compute the checksum of a memory region.
-ETEXI
 SRST
 ``sum`` *addr* *size*
   Compute the checksum of a memory region.
@@ -1018,11 +673,6 @@ ERST
         .command_completion = device_add_completion,
     },
 
-STEXI
-@item device_add @var{config}
-@findex device_add
-Add device.
-ETEXI
 SRST
 ``device_add`` *config*
   Add device.
@@ -1037,12 +687,6 @@ ERST
         .command_completion = device_del_completion,
     },
 
-STEXI
-@item device_del @var{id}
-@findex device_del
-Remove device @var{id}. @var{id} may be a short ID
-or a QOM object path.
-ETEXI
 SRST
 ``device_del`` *id*
   Remove device *id*. *id* may be a short ID
@@ -1057,11 +701,6 @@ ERST
         .cmd        = hmp_cpu,
     },
 
-STEXI
-@item cpu @var{index}
-@findex cpu
-Set the default CPU.
-ETEXI
 SRST
 ``cpu`` *index*
   Set the default CPU.
@@ -1075,12 +714,6 @@ ERST
         .cmd        = hmp_mouse_move,
     },
 
-STEXI
-@item mouse_move @var{dx} @var{dy} [@var{dz}]
-@findex mouse_move
-Move the active mouse to the specified coordinates @var{dx} @var{dy}
-with optional scroll axis @var{dz}.
-ETEXI
 SRST
 ``mouse_move`` *dx* *dy* [*dz*]
   Move the active mouse to the specified coordinates *dx* *dy*
@@ -1095,11 +728,6 @@ ERST
         .cmd        = hmp_mouse_button,
     },
 
-STEXI
-@item mouse_button @var{val}
-@findex mouse_button
-Change the active mouse button state @var{val} (1=L, 2=M, 4=R).
-ETEXI
 SRST
 ``mouse_button`` *val*
   Change the active mouse button state *val* (1=L, 2=M, 4=R).
@@ -1113,15 +741,6 @@ ERST
         .cmd        = hmp_mouse_set,
     },
 
-STEXI
-@item mouse_set @var{index}
-@findex mouse_set
-Set which mouse device receives events at given @var{index}, index
-can be obtained with
-@example
-info mice
-@end example
-ETEXI
 SRST
 ``mouse_set`` *index*
   Set which mouse device receives events at given *index*, index
@@ -1138,20 +757,6 @@ ERST
         .help       = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)",
         .cmd        = hmp_wavcapture,
     },
-STEXI
-@item wavcapture @var{filename} @var{audiodev} [@var{frequency} [@var{bits} [@var{channels}]]]
-@findex wavcapture
-Capture audio into @var{filename} from @var{audiodev}, using sample rate
-@var{frequency} bits per sample @var{bits} and number of channels
-@var{channels}.
-
-Defaults:
-@itemize @minus
-@item Sample rate = 44100 Hz - CD quality
-@item Bits = 16
-@item Number of channels = 2 - Stereo
-@end itemize
-ETEXI
 SRST
 ``wavcapture`` *filename* *audiodev* [*frequency* [*bits* [*channels*]]]
   Capture audio into *filename* from *audiodev*, using sample rate
@@ -1172,14 +777,6 @@ ERST
         .help       = "stop capture",
         .cmd        = hmp_stopcapture,
     },
-STEXI
-@item stopcapture @var{index}
-@findex stopcapture
-Stop capture with a given @var{index}, index can be obtained with
-@example
-info capture
-@end example
-ETEXI
 SRST
 ``stopcapture`` *index*
   Stop capture with a given *index*, index can be obtained with::
@@ -1196,11 +793,6 @@ ERST
         .cmd        = hmp_memsave,
     },
 
-STEXI
-@item memsave @var{addr} @var{size} @var{file}
-@findex memsave
-save to disk virtual memory dump starting at @var{addr} of size @var{size}.
-ETEXI
 SRST
 ``memsave`` *addr* *size* *file*
   save to disk virtual memory dump starting at *addr* of size *size*.
@@ -1214,11 +806,6 @@ ERST
         .cmd        = hmp_pmemsave,
     },
 
-STEXI
-@item pmemsave @var{addr} @var{size} @var{file}
-@findex pmemsave
-save to disk physical memory dump starting at @var{addr} of size @var{size}.
-ETEXI
 SRST
 ``pmemsave`` *addr* *size* *file*
   save to disk physical memory dump starting at *addr* of size *size*.
@@ -1232,15 +819,6 @@ ERST
         .cmd        = hmp_boot_set,
     },
 
-STEXI
-@item boot_set @var{bootdevicelist}
-@findex boot_set
-Define new values for the boot device list. Those values will override
-the values specified on the command line through the @code{-boot} option.
-
-The values that can be specified here depend on the machine type, but are
-the same that can be specified in the @code{-boot} command line option.
-ETEXI
 SRST
 ``boot_set`` *bootdevicelist*
   Define new values for the boot device list. Those values will override
@@ -1257,12 +835,6 @@ ERST
         .help       = "inject an NMI",
         .cmd        = hmp_nmi,
     },
-STEXI
-@item nmi @var{cpu}
-@findex nmi
-Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
-
-ETEXI
 SRST
 ``nmi`` *cpu*
   Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
@@ -1277,13 +849,6 @@ ERST
         .command_completion = ringbuf_write_completion,
     },
 
-STEXI
-@item ringbuf_write @var{device} @var{data}
-@findex ringbuf_write
-Write @var{data} to ring buffer character device @var{device}.
-@var{data} must be a UTF-8 string.
-
-ETEXI
 SRST
 ``ringbuf_write`` *device* *data*
   Write *data* to ring buffer character device *device*.
@@ -1299,18 +864,6 @@ ERST
         .command_completion = ringbuf_write_completion,
     },
 
-STEXI
-@item ringbuf_read @var{device}
-@findex ringbuf_read
-Read and print up to @var{size} bytes from ring buffer character
-device @var{device}.
-Certain non-printable characters are printed \uXXXX, where XXXX is the
-character code in hexadecimal.  Character \ is printed \\.
-Bug: can screw up when the buffer contains invalid UTF-8 sequences,
-NUL characters, after the ring buffer lost data, and when reading
-stops because the size limit is reached.
-
-ETEXI
 SRST
 ``ringbuf_read`` *device*
   Read and print up to *size* bytes from ring buffer character
@@ -1330,16 +883,6 @@ ERST
         .cmd        = hmp_announce_self,
     },
 
-STEXI
-@item announce_self
-@findex announce_self
-Trigger a round of GARP/RARP broadcasts; this is useful for explicitly updating the
-network infrastructure after a reconfiguration or some forms of migration.
-The timings of the round are set by the migration announce parameters.
-An optional comma separated @var{interfaces} list restricts the announce to the
-named set of interfaces. An optional @var{id} can be used to start a separate announce
-timer and to change the parameters of it later.
-ETEXI
 SRST
 ``announce_self``
   Trigger a round of GARP/RARP broadcasts; this is useful for explicitly
@@ -1364,13 +907,6 @@ ERST
     },
 
 
-STEXI
-@item migrate [-d] [-b] [-i] @var{uri}
-@findex migrate
-Migrate to @var{uri} (using -d to not wait for completion).
-	-b for migration with full copy of disk
-	-i for migration with incremental copy of disk (base image is shared)
-ETEXI
 SRST
 ``migrate [-d] [-b] [-i]`` *uri*
   Migrate to *uri* (using -d to not wait for completion).
@@ -1389,11 +925,6 @@ ERST
         .cmd        = hmp_migrate_cancel,
     },
 
-STEXI
-@item migrate_cancel
-@findex migrate_cancel
-Cancel the current VM migration.
-ETEXI
 SRST
 ``migrate_cancel``
   Cancel the current VM migration.
@@ -1406,11 +937,6 @@ ERST
         .help       = "Continue migration from the given paused state",
         .cmd        = hmp_migrate_continue,
     },
-STEXI
-@item migrate_continue @var{state}
-@findex migrate_continue
-Continue migration from the paused state @var{state}
-ETEXI
 SRST
 ``migrate_continue`` *state*
   Continue migration from the paused state *state*
@@ -1424,12 +950,6 @@ ERST
         .cmd        = hmp_migrate_incoming,
     },
 
-STEXI
-@item migrate_incoming @var{uri}
-@findex migrate_incoming
-Continue an incoming migration using the @var{uri} (that has the same syntax
-as the -incoming option).
-ETEXI
 SRST
 ``migrate_incoming`` *uri*
   Continue an incoming migration using the *uri* (that has the same syntax
@@ -1444,11 +964,6 @@ ERST
         .cmd        = hmp_migrate_recover,
     },
 
-STEXI
-@item migrate_recover @var{uri}
-@findex migrate_recover
-Continue a paused incoming postcopy migration using the @var{uri}.
-ETEXI
 SRST
 ``migrate_recover`` *uri*
   Continue a paused incoming postcopy migration using the *uri*.
@@ -1462,11 +977,6 @@ ERST
         .cmd        = hmp_migrate_pause,
     },
 
-STEXI
-@item migrate_pause
-@findex migrate_pause
-Pause an ongoing migration.  Currently it only supports postcopy.
-ETEXI
 SRST
 ``migrate_pause``
   Pause an ongoing migration.  Currently it only supports postcopy.
@@ -1485,11 +995,6 @@ ERST
         .cmd        = hmp_migrate_set_cache_size,
     },
 
-STEXI
-@item migrate_set_cache_size @var{value}
-@findex migrate_set_cache_size
-Set cache size to @var{value} (in bytes) for xbzrle migrations.
-ETEXI
 SRST
 ``migrate_set_cache_size`` *value*
   Set cache size to *value* (in bytes) for xbzrle migrations.
@@ -1504,11 +1009,6 @@ ERST
         .cmd        = hmp_migrate_set_speed,
     },
 
-STEXI
-@item migrate_set_speed @var{value}
-@findex migrate_set_speed
-Set maximum speed to @var{value} (in bytes) for migrations.
-ETEXI
 SRST
 ``migrate_set_speed`` *value*
   Set maximum speed to *value* (in bytes) for migrations.
@@ -1522,11 +1022,6 @@ ERST
         .cmd        = hmp_migrate_set_downtime,
     },
 
-STEXI
-@item migrate_set_downtime @var{second}
-@findex migrate_set_downtime
-Set maximum tolerated downtime (in seconds) for migration.
-ETEXI
 SRST
 ``migrate_set_downtime`` *second*
   Set maximum tolerated downtime (in seconds) for migration.
@@ -1541,11 +1036,6 @@ ERST
         .command_completion = migrate_set_capability_completion,
     },
 
-STEXI
-@item migrate_set_capability @var{capability} @var{state}
-@findex migrate_set_capability
-Enable/Disable the usage of a capability @var{capability} for migration.
-ETEXI
 SRST
 ``migrate_set_capability`` *capability* *state*
   Enable/Disable the usage of a capability *capability* for migration.
@@ -1560,11 +1050,6 @@ ERST
         .command_completion = migrate_set_parameter_completion,
     },
 
-STEXI
-@item migrate_set_parameter @var{parameter} @var{value}
-@findex migrate_set_parameter
-Set the parameter @var{parameter} for migration.
-ETEXI
 SRST
 ``migrate_set_parameter`` *parameter* *value*
   Set the parameter *parameter* for migration.
@@ -1581,12 +1066,6 @@ ERST
         .cmd        = hmp_migrate_start_postcopy,
     },
 
-STEXI
-@item migrate_start_postcopy
-@findex migrate_start_postcopy
-Switch in-progress migration to postcopy mode. Ignored after the end of
-migration (or once already in postcopy).
-ETEXI
 SRST
 ``migrate_start_postcopy``
   Switch in-progress migration to postcopy mode. Ignored after the end of
@@ -1602,11 +1081,6 @@ ERST
         .cmd = hmp_x_colo_lost_heartbeat,
     },
 
-STEXI
-@item x_colo_lost_heartbeat
-@findex x_colo_lost_heartbeat
-Tell COLO that heartbeat is lost, a failover or takeover is needed.
-ETEXI
 SRST
 ``x_colo_lost_heartbeat``
   Tell COLO that heartbeat is lost, a failover or takeover is needed.
@@ -1620,13 +1094,6 @@ ERST
         .cmd        = hmp_client_migrate_info,
     },
 
-STEXI
-@item client_migrate_info @var{protocol} @var{hostname} @var{port} @var{tls-port} @var{cert-subject}
-@findex client_migrate_info
-Set migration information for remote display.  This makes the server
-ask the client to automatically reconnect using the new parameters
-once migration finished successfully.  Only implemented for SPICE.
-ETEXI
 SRST
 ``client_migrate_info`` *protocol* *hostname* *port* *tls-port* *cert-subject*
   Set migration information for remote display.  This makes the server
@@ -1651,24 +1118,6 @@ ERST
         .cmd        = hmp_dump_guest_memory,
     },
 
-STEXI
-@item dump-guest-memory [-p] @var{filename} @var{begin} @var{length}
-@item dump-guest-memory [-z|-l|-s|-w] @var{filename}
-@findex dump-guest-memory
-Dump guest memory to @var{protocol}. The file can be processed with crash or
-gdb. Without -z|-l|-s|-w, the dump format is ELF.
-        -p: do paging to get guest's memory mapping.
-        -z: dump in kdump-compressed format, with zlib compression.
-        -l: dump in kdump-compressed format, with lzo compression.
-        -s: dump in kdump-compressed format, with snappy compression.
-        -w: dump in Windows crashdump format (can be used instead of ELF-dump converting),
-            for Windows x64 guests with vmcoreinfo driver only
-  filename: dump file name.
-     begin: the starting physical address. It's optional, and should be
-            specified together with length.
-    length: the memory size, in bytes. It's optional, and should be specified
-            together with begin.
-ETEXI
 SRST
 ``dump-guest-memory [-p]`` *filename* *begin* *length*
   \ 
@@ -1708,11 +1157,6 @@ ERST
     },
 #endif
 
-STEXI
-@item dump-skeys @var{filename}
-@findex dump-skeys
-Save guest storage keys to a file.
-ETEXI
 SRST
 ``dump-skeys`` *filename*
   Save guest storage keys to a file.
@@ -1728,11 +1172,6 @@ ERST
     },
 #endif
 
-STEXI
-@item migration_mode @var{mode}
-@findex migration_mode
-Enables or disables migration mode.
-ETEXI
 SRST
 ``migration_mode`` *mode*
   Enables or disables migration mode.
@@ -1753,11 +1192,6 @@ ERST
         .cmd        = hmp_snapshot_blkdev,
     },
 
-STEXI
-@item snapshot_blkdev
-@findex snapshot_blkdev
-Snapshot device, using snapshot file as target if provided
-ETEXI
 SRST
 ``snapshot_blkdev``
   Snapshot device, using snapshot file as target if provided
@@ -1773,11 +1207,6 @@ ERST
         .cmd        = hmp_snapshot_blkdev_internal,
     },
 
-STEXI
-@item snapshot_blkdev_internal
-@findex snapshot_blkdev_internal
-Take an internal snapshot on device if it support
-ETEXI
 SRST
 ``snapshot_blkdev_internal``
   Take an internal snapshot on device if it support
@@ -1795,11 +1224,6 @@ ERST
         .cmd        = hmp_snapshot_delete_blkdev_internal,
     },
 
-STEXI
-@item snapshot_delete_blkdev_internal
-@findex snapshot_delete_blkdev_internal
-Delete an internal snapshot on device if it support
-ETEXI
 SRST
 ``snapshot_delete_blkdev_internal``
   Delete an internal snapshot on device if it support
@@ -1819,12 +1243,6 @@ ERST
                       "so that the result does not need a backing file.\n\t\t\t",
         .cmd        = hmp_drive_mirror,
     },
-STEXI
-@item drive_mirror
-@findex drive_mirror
-Start mirroring a block device's writes to a new destination,
-using the specified target.
-ETEXI
 SRST
 ``drive_mirror``
   Start mirroring a block device's writes to a new destination,
@@ -1847,11 +1265,6 @@ ERST
                       "(if the target format supports it).\n\t\t\t",
         .cmd        = hmp_drive_backup,
     },
-STEXI
-@item drive_backup
-@findex drive_backup
-Start a point-in-time copy of a block device to a specificed target.
-ETEXI
 SRST
 ``drive_backup``
   Start a point-in-time copy of a block device to a specificed target.
@@ -1869,11 +1282,6 @@ ERST
         .cmd        = hmp_drive_add,
     },
 
-STEXI
-@item drive_add
-@findex drive_add
-Add drive to PCI storage controller.
-ETEXI
 SRST
 ``drive_add``
   Add drive to PCI storage controller.
@@ -1897,11 +1305,6 @@ ERST
         .cmd        = hmp_pcie_aer_inject_error,
     },
 
-STEXI
-@item pcie_aer_inject_error
-@findex pcie_aer_inject_error
-Inject PCIe AER error
-ETEXI
 SRST
 ``pcie_aer_inject_error``
   Inject PCIe AER error
@@ -1916,11 +1319,6 @@ ERST
         .command_completion = netdev_add_completion,
     },
 
-STEXI
-@item netdev_add
-@findex netdev_add
-Add host network device.
-ETEXI
 SRST
 ``netdev_add``
   Add host network device.
@@ -1935,11 +1333,6 @@ ERST
         .command_completion = netdev_del_completion,
     },
 
-STEXI
-@item netdev_del
-@findex netdev_del
-Remove host network device.
-ETEXI
 SRST
 ``netdev_del``
   Remove host network device.
@@ -1954,11 +1347,6 @@ ERST
         .command_completion = object_add_completion,
     },
 
-STEXI
-@item object_add
-@findex object_add
-Create QOM object.
-ETEXI
 SRST
 ``object_add``
   Create QOM object.
@@ -1973,11 +1361,6 @@ ERST
         .command_completion = object_del_completion,
     },
 
-STEXI
-@item object_del
-@findex object_del
-Destroy QOM object.
-ETEXI
 SRST
 ``object_del``
   Destroy QOM object.
@@ -1992,11 +1375,6 @@ ERST
         .cmd        = hmp_hostfwd_add,
     },
 #endif
-STEXI
-@item hostfwd_add
-@findex hostfwd_add
-Redirect TCP or UDP connections from host to guest (requires -net user).
-ETEXI
 SRST
 ``hostfwd_add``
   Redirect TCP or UDP connections from host to guest (requires -net user).
@@ -2012,11 +1390,6 @@ ERST
     },
 
 #endif
-STEXI
-@item hostfwd_remove
-@findex hostfwd_remove
-Remove host-to-guest TCP or UDP redirection.
-ETEXI
 SRST
 ``hostfwd_remove``
   Remove host-to-guest TCP or UDP redirection.
@@ -2030,11 +1403,6 @@ ERST
         .cmd        = hmp_balloon,
     },
 
-STEXI
-@item balloon @var{value}
-@findex balloon
-Request VM to change its memory allocation to @var{value} (in MB).
-ETEXI
 SRST
 ``balloon`` *value*
   Request VM to change its memory allocation to *value* (in MB).
@@ -2049,11 +1417,6 @@ ERST
         .command_completion = set_link_completion,
     },
 
-STEXI
-@item set_link @var{name} [on|off]
-@findex set_link
-Switch link @var{name} on (i.e. up) or off (i.e. down).
-ETEXI
 SRST
 ``set_link`` *name* ``[on|off]``
   Switch link *name* on (i.e. up) or off (i.e. down).
@@ -2068,11 +1431,6 @@ ERST
         .command_completion = watchdog_action_completion,
     },
 
-STEXI
-@item watchdog_action
-@findex watchdog_action
-Change watchdog action.
-ETEXI
 SRST
 ``watchdog_action``
   Change watchdog action.
@@ -2086,14 +1444,6 @@ ERST
         .cmd        = hmp_acl_show,
     },
 
-STEXI
-@item acl_show @var{aclname}
-@findex acl_show
-List all the matching rules in the access control list, and the default
-policy. There are currently two named access control lists,
-@var{vnc.x509dname} and @var{vnc.username} matching on the x509 client
-certificate distinguished name, and SASL username respectively.
-ETEXI
 SRST
 ``acl_show`` *aclname*
   List all the matching rules in the access control list, and the default
@@ -2110,13 +1460,6 @@ ERST
         .cmd        = hmp_acl_policy,
     },
 
-STEXI
-@item acl_policy @var{aclname} @code{allow|deny}
-@findex acl_policy
-Set the default access control list policy, used in the event that
-none of the explicit rules match. The default policy at startup is
-always @code{deny}.
-ETEXI
 SRST
 ``acl_policy`` *aclname* ``allow|deny``
   Set the default access control list policy, used in the event that
@@ -2132,16 +1475,6 @@ ERST
         .cmd        = hmp_acl_add,
     },
 
-STEXI
-@item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}]
-@findex acl_add
-Add a match rule to the access control list, allowing or denying access.
-The match will normally be an exact username or x509 distinguished name,
-but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to
-allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will
-normally be appended to the end of the ACL, but can be inserted
-earlier in the list if the optional @var{index} parameter is supplied.
-ETEXI
 SRST
 ``acl_add`` *aclname* *match* ``allow|deny`` [*index*]
   Add a match rule to the access control list, allowing or denying access.
@@ -2160,11 +1493,6 @@ ERST
         .cmd        = hmp_acl_remove,
     },
 
-STEXI
-@item acl_remove @var{aclname} @var{match}
-@findex acl_remove
-Remove the specified match rule from the access control list.
-ETEXI
 SRST
 ``acl_remove`` *aclname* *match*
   Remove the specified match rule from the access control list.
@@ -2178,12 +1506,6 @@ ERST
         .cmd        = hmp_acl_reset,
     },
 
-STEXI
-@item acl_reset @var{aclname}
-@findex acl_reset
-Remove all matches from the access control list, and set the default
-policy back to @code{deny}.
-ETEXI
 SRST
 ``acl_reset`` *aclname*
   Remove all matches from the access control list, and set the default
@@ -2197,14 +1519,6 @@ ERST
         .help       = "serve block devices on the given host and port",
         .cmd        = hmp_nbd_server_start,
     },
-STEXI
-@item nbd_server_start @var{host}:@var{port}
-@findex nbd_server_start
-Start an NBD server on the given host and/or port.  If the @option{-a}
-option is included, all of the virtual machine's block devices that
-have an inserted media on them are automatically exported; in this case,
-the @option{-w} option makes the devices writable too.
-ETEXI
 SRST
 ``nbd_server_start`` *host*:*port*
   Start an NBD server on the given host and/or port.  If the ``-a``
@@ -2220,14 +1534,6 @@ ERST
         .help       = "export a block device via NBD",
         .cmd        = hmp_nbd_server_add,
     },
-STEXI
-@item nbd_server_add @var{device} [ @var{name} ]
-@findex nbd_server_add
-Export a block device through QEMU's NBD server, which must be started
-beforehand with @command{nbd_server_start}.  The @option{-w} option makes the
-exported device writable too.  The export name is controlled by @var{name},
-defaulting to @var{device}.
-ETEXI
 SRST
 ``nbd_server_add`` *device* [ *name* ]
   Export a block device through QEMU's NBD server, which must be started
@@ -2243,15 +1549,6 @@ ERST
         .help       = "remove an export previously exposed via NBD",
         .cmd        = hmp_nbd_server_remove,
     },
-STEXI
-@item nbd_server_remove [-f] @var{name}
-@findex nbd_server_remove
-Stop exporting a block device through QEMU's NBD server, which was
-previously started with @command{nbd_server_add}.  The @option{-f}
-option forces the server to drop the export immediately even if
-clients are connected; otherwise the command fails unless there are no
-clients.
-ETEXI
 SRST
 ``nbd_server_remove [-f]`` *name*
   Stop exporting a block device through QEMU's NBD server, which was
@@ -2268,11 +1565,6 @@ ERST
         .help       = "stop serving block devices using the NBD protocol",
         .cmd        = hmp_nbd_server_stop,
     },
-STEXI
-@item nbd_server_stop
-@findex nbd_server_stop
-Stop the QEMU embedded NBD server.
-ETEXI
 SRST
 ``nbd_server_stop``
   Stop the QEMU embedded NBD server.
@@ -2290,11 +1582,6 @@ ERST
     },
 
 #endif
-STEXI
-@item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc}
-@findex mce (x86)
-Inject an MCE on the given CPU (x86 only).
-ETEXI
 SRST
 ``mce`` *cpu* *bank* *status* *mcgstatus* *addr* *misc*
   Inject an MCE on the given CPU (x86 only).
@@ -2308,13 +1595,6 @@ ERST
         .cmd        = hmp_getfd,
     },
 
-STEXI
-@item getfd @var{fdname}
-@findex getfd
-If a file descriptor is passed alongside this command using the SCM_RIGHTS
-mechanism on unix sockets, it is stored using the name @var{fdname} for
-later use by other monitor commands.
-ETEXI
 SRST
 ``getfd`` *fdname*
   If a file descriptor is passed alongside this command using the SCM_RIGHTS
@@ -2330,13 +1610,6 @@ ERST
         .cmd        = hmp_closefd,
     },
 
-STEXI
-@item closefd @var{fdname}
-@findex closefd
-Close the file descriptor previously assigned to @var{fdname} using the
-@code{getfd} command. This is only needed if the file descriptor was never
-used by another monitor command.
-ETEXI
 SRST
 ``closefd`` *fdname*
   Close the file descriptor previously assigned to *fdname* using the
@@ -2352,13 +1625,6 @@ ERST
         .cmd        = hmp_block_passwd,
     },
 
-STEXI
-@item block_passwd @var{device} @var{password}
-@findex block_passwd
-Set the encrypted device @var{device} password to @var{password}
-
-This command is now obsolete and will always return an error since 2.10
-ETEXI
 SRST
 ``block_passwd`` *device* *password*
   Set the encrypted device *device* password to *password*
@@ -2374,12 +1640,6 @@ ERST
         .cmd        = hmp_block_set_io_throttle,
     },
 
-STEXI
-@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
-@findex block_set_io_throttle
-Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}.
-@var{device} can be a block device name, a qdev ID or a QOM path.
-ETEXI
 SRST
 ``block_set_io_throttle`` *device* *bps* *bps_rd* *bps_wr* *iops* *iops_rd* *iops_wr*
   Change I/O throttle limits for a block drive to
@@ -2395,16 +1655,6 @@ ERST
         .cmd        = hmp_set_password,
     },
 
-STEXI
-@item set_password [ vnc | spice ] password [ action-if-connected ]
-@findex set_password
-Change spice/vnc password.  Use zero to make the password stay valid
-forever.  @var{action-if-connected} specifies what should happen in
-case a connection is established: @var{fail} makes the password change
-fail.  @var{disconnect} changes the password and disconnects the
-client.  @var{keep} changes the password and keeps the connection up.
-@var{keep} is the default.
-ETEXI
 SRST
 ``set_password [ vnc | spice ] password [ action-if-connected ]``
   Change spice/vnc password.  Use zero to make the password stay valid
@@ -2423,28 +1673,6 @@ ERST
         .cmd        = hmp_expire_password,
     },
 
-STEXI
-@item expire_password [ vnc | spice ] expire-time
-@findex expire_password
-Specify when a password for spice/vnc becomes
-invalid. @var{expire-time} accepts:
-
-@table @var
-@item now
-Invalidate password instantly.
-
-@item never
-Password stays valid forever.
-
-@item +nsec
-Password stays valid for @var{nsec} seconds starting now.
-
-@item nsec
-Password is invalidated at the given time.  @var{nsec} are the seconds
-passed since 1970, i.e. unix epoch.
-
-@end table
-ETEXI
 SRST
 ``expire_password [ vnc | spice ]`` *expire-time*
   Specify when a password for spice/vnc becomes
@@ -2471,12 +1699,6 @@ ERST
         .command_completion = chardev_add_completion,
     },
 
-STEXI
-@item chardev-add args
-@findex chardev-add
-chardev-add accepts the same parameters as the -chardev command line switch.
-
-ETEXI
 SRST
 ``chardev-add`` *args*
   chardev-add accepts the same parameters as the -chardev command line switch.
@@ -2490,13 +1712,6 @@ ERST
         .cmd        = hmp_chardev_change,
     },
 
-STEXI
-@item chardev-change args
-@findex chardev-change
-chardev-change accepts existing chardev @var{id} and then the same arguments
-as the -chardev command line switch (except for "id").
-
-ETEXI
 SRST
 ``chardev-change`` *args*
   chardev-change accepts existing chardev *id* and then the same arguments
@@ -2512,12 +1727,6 @@ ERST
         .command_completion = chardev_remove_completion,
     },
 
-STEXI
-@item chardev-remove id
-@findex chardev-remove
-Removes the chardev @var{id}.
-
-ETEXI
 SRST
 ``chardev-remove`` *id*
   Removes the chardev *id*.
@@ -2532,12 +1741,6 @@ ERST
         .command_completion = chardev_remove_completion,
     },
 
-STEXI
-@item chardev-send-break id
-@findex chardev-send-break
-Send a break on the chardev @var{id}.
-
-ETEXI
 SRST
 ``chardev-send-break`` *id*
   Send a break on the chardev *id*.
@@ -2553,12 +1756,6 @@ ERST
         .cmd        = hmp_qemu_io,
     },
 
-STEXI
-@item qemu-io @var{device} @var{command}
-@findex qemu-io
-Executes a qemu-io command on the given block device.
-
-ETEXI
 SRST
 ``qemu-io`` *device* *command*
   Executes a qemu-io command on the given block device.
@@ -2572,13 +1769,6 @@ ERST
         .cmd        = hmp_cpu_add,
     },
 
-STEXI
-@item cpu-add @var{id}
-@findex cpu-add
-Add CPU with id @var{id}.  This command is deprecated, please
-+use @code{device_add} instead. For details, refer to
-'docs/cpu-hotplug.rst'.
-ETEXI
 SRST
 ``cpu-add`` *id*
   Add CPU with id *id*.  This command is deprecated, please
@@ -2595,10 +1785,6 @@ ERST
         .flags      = "p",
     },
 
-STEXI
-@item qom-list [@var{path}]
-Print QOM properties of object at location @var{path}
-ETEXI
 SRST
 ``qom-list`` [*path*]
   Print QOM properties of object at location *path*
@@ -2613,10 +1799,6 @@ ERST
         .flags      = "p",
     },
 
-STEXI
-@item qom-set @var{path} @var{property} @var{value}
-Set QOM property @var{property} of object at location @var{path} to value @var{value}
-ETEXI
 SRST
 ``qom-set`` *path* *property* *value*
   Set QOM property *property* of object at location *path* to value *value*
@@ -2632,6 +1814,3 @@ ERST
         .flags      = "p",
     },
 
-STEXI
-@end table
-ETEXI