qemu-doc: remove indices other than findex

These indices are not well-maintained, and pandoc also chokes on the
directives.  Just nuke them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-13-peter.maydell@linaro.org
Message-id: 20200226113034.6741-13-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

12 files changed, 0 insertions, 29 deletions

diff --git a/docs/system/keys.texi b/docs/system/keys.texi
index 4c74b3b..c04daf5 100644
--- a/docs/system/keys.texi
+++ b/docs/system/keys.texi
@@ -10,23 +10,18 @@ then the modifier is Ctrl-Alt-Shift (instead of Ctrl-Alt) and if you use
 
 @table @key
 @item Ctrl-Alt-f
-@kindex Ctrl-Alt-f
 Toggle full screen
 
 @item Ctrl-Alt-+
-@kindex Ctrl-Alt-+
 Enlarge the screen
 
 @item Ctrl-Alt--
-@kindex Ctrl-Alt--
 Shrink the screen
 
 @item Ctrl-Alt-u
-@kindex Ctrl-Alt-u
 Restore the screen's un-scaled dimensions
 
 @item Ctrl-Alt-n
-@kindex Ctrl-Alt-n
 Switch to virtual console 'n'. Standard console mappings are:
 @table @emph
 @item 1
@@ -38,14 +33,9 @@ Serial port
 @end table
 
 @item Ctrl-Alt
-@kindex Ctrl-Alt
 Toggle mouse and keyboard grab.
 @end table
 
-@kindex Ctrl-Up
-@kindex Ctrl-Down
-@kindex Ctrl-PageUp
-@kindex Ctrl-PageDown
 In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
 @key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
 
diff --git a/docs/system/monitor.texi b/docs/system/monitor.texi
index c5b6a9b..b41b144 100644
--- a/docs/system/monitor.texi
+++ b/docs/system/monitor.texi
@@ -1,6 +1,5 @@
 @node pcsys_monitor
 @section QEMU Monitor
-@cindex QEMU monitor
 
 The QEMU monitor is used to give complex commands to the QEMU
 emulator. You can use it to:
diff --git a/docs/system/mux-chardev.texi b/docs/system/mux-chardev.texi
index c9a2d14..b21c2c5 100644
--- a/docs/system/mux-chardev.texi
+++ b/docs/system/mux-chardev.texi
@@ -12,26 +12,19 @@ you're using the default.
 
 @table @key
 @item Ctrl-a h
-@kindex Ctrl-a h
 Print this help
 @item Ctrl-a x
-@kindex Ctrl-a x
 Exit emulator
 @item Ctrl-a s
-@kindex Ctrl-a s
 Save disk data back to file (if -snapshot)
 @item Ctrl-a t
-@kindex Ctrl-a t
 Toggle console timestamps
 @item Ctrl-a b
-@kindex Ctrl-a b
 Send break (magic sysrq in Linux)
 @item Ctrl-a c
-@kindex Ctrl-a c
 Rotate between the frontends connected to the multiplexer (usually
 this switches between the monitor and the console)
 @item Ctrl-a Ctrl-a
-@kindex Ctrl-a Ctrl-a
 Send the escape character to the frontend
 @end table
 @c man end
diff --git a/docs/system/quickstart.texi b/docs/system/quickstart.texi
index ed7295d..baceaa9 100644
--- a/docs/system/quickstart.texi
+++ b/docs/system/quickstart.texi
@@ -1,6 +1,5 @@
 @node pcsys_quickstart
 @section Quick Start
-@cindex quick start
 
 Download and uncompress a PC hard disk image with Linux installed (e.g.
 @file{linux.img}) and type:
diff --git a/docs/system/target-arm.texi b/docs/system/target-arm.texi
index 040d77b..c56b5f6 100644
--- a/docs/system/target-arm.texi
+++ b/docs/system/target-arm.texi
@@ -1,6 +1,5 @@
 @node ARM System emulator
 @section ARM System emulator
-@cindex system emulation (ARM)
 
 Use the executable @file{qemu-system-arm} to simulate a ARM
 machine. The ARM Integrator/CP board is emulated with the following
diff --git a/docs/system/target-i386.texi b/docs/system/target-i386.texi
index edd23fa..cc352b8 100644
--- a/docs/system/target-i386.texi
+++ b/docs/system/target-i386.texi
@@ -1,6 +1,5 @@
 @node x86 (PC) System emulator
 @section x86 (PC) System emulator
-@cindex system emulation (PC)
 
 @menu
 * pcsys_devices::      Peripherals
diff --git a/docs/system/target-m68k.texi b/docs/system/target-m68k.texi
index b5bc9df..a77b19e 100644
--- a/docs/system/target-m68k.texi
+++ b/docs/system/target-m68k.texi
@@ -1,7 +1,5 @@
 @node ColdFire System emulator
 @section ColdFire System emulator
-@cindex system emulation (ColdFire)
-@cindex system emulation (M68K)
 
 Use the executable @file{qemu-system-m68k} to simulate a ColdFire machine.
 The emulator is able to boot a uClinux kernel.
diff --git a/docs/system/target-mips.texi b/docs/system/target-mips.texi
index f722c00..fe12ee9 100644
--- a/docs/system/target-mips.texi
+++ b/docs/system/target-mips.texi
@@ -1,6 +1,5 @@
 @node MIPS System emulator
 @section MIPS System emulator
-@cindex system emulation (MIPS)
 
 @menu
 * recommendations_cpu_models_MIPS:: Supported CPU model configurations on MIPS hosts
@@ -126,7 +125,6 @@ MIPSnet network emulation
 
 @node nanoMIPS System emulator
 @subsection nanoMIPS System emulator
-@cindex system emulation (nanoMIPS)
 
 Executable @file{qemu-system-mipsel} also covers simulation of
 32-bit nanoMIPS system in little endian mode:
diff --git a/docs/system/target-ppc.texi b/docs/system/target-ppc.texi
index c2c254d..55f98f6 100644
--- a/docs/system/target-ppc.texi
+++ b/docs/system/target-ppc.texi
@@ -1,6 +1,5 @@
 @node PowerPC System emulator
 @section PowerPC System emulator
-@cindex system emulation (PowerPC)
 
 Use the executable @file{qemu-system-ppc} to simulate a complete 40P (PREP)
 or PowerMac PowerPC system.
diff --git a/docs/system/target-sparc.texi b/docs/system/target-sparc.texi
index 7fe0aec..7748001 100644
--- a/docs/system/target-sparc.texi
+++ b/docs/system/target-sparc.texi
@@ -1,6 +1,5 @@
 @node Sparc32 System emulator
 @section Sparc32 System emulator
-@cindex system emulation (Sparc32)
 
 Use the executable @file{qemu-system-sparc} to simulate the following
 Sun4m architecture machines:
diff --git a/docs/system/target-sparc64.texi b/docs/system/target-sparc64.texi
index 9e7a27d..4db4ca3 100644
--- a/docs/system/target-sparc64.texi
+++ b/docs/system/target-sparc64.texi
@@ -1,6 +1,5 @@
 @node Sparc64 System emulator
 @section Sparc64 System emulator
-@cindex system emulation (Sparc64)
 
 Use the executable @file{qemu-system-sparc64} to simulate a Sun4u
 (UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic
diff --git a/docs/system/target-xtensa.texi b/docs/system/target-xtensa.texi
index 08b0b36..40327de 100644
--- a/docs/system/target-xtensa.texi
+++ b/docs/system/target-xtensa.texi
@@ -1,6 +1,5 @@
 @node Xtensa System emulator
 @section Xtensa System emulator
-@cindex system emulation (Xtensa)
 
 Two executables cover simulation of both Xtensa endian options,
 @file{qemu-system-xtensa} and @file{qemu-system-xtensaeb}.