qemu-doc: split qemu-doc.texi in multiple files

In order to facilitate the reorganization of qemu-doc.texi content,
as well as the conversion to rST/Sphinx, split it in multiple .texi
files that are included from docs/system.

The "other devices" section is renamed to ivshmem and placed last.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-6-peter.maydell@linaro.org
Message-id: 20200226113034.6741-6-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 240 insertions, 0 deletions

diff --git a/docs/system/invocation.texi b/docs/system/invocation.texi
new file mode 100644
index 0000000..dac41cc
--- /dev/null
+++ b/docs/system/invocation.texi
@@ -0,0 +1,240 @@
+@node sec_invocation
+@section Invocation
+
+@example
+@c man begin SYNOPSIS
+@command{@value{qemu_system}} [@var{options}] [@var{disk_image}]
+@c man end
+@end example
+
+@c man begin OPTIONS
+@var{disk_image} is a raw hard disk image for IDE hard disk 0. Some
+targets do not need a disk image.
+
+@include qemu-options.texi
+
+@c man end
+
+@subsection Device URL Syntax
+@c TODO merge this with section Disk Images
+
+@c man begin NOTES
+
+In addition to using normal file images for the emulated storage devices,
+QEMU can also use networked resources such as iSCSI devices. These are
+specified using a special URL syntax.
+
+@table @option
+@item iSCSI
+iSCSI support allows QEMU to access iSCSI resources directly and use as
+images for the guest storage. Both disk and cdrom images are supported.
+
+Syntax for specifying iSCSI LUNs is
+``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>''
+
+By default qemu will use the iSCSI initiator-name
+'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command
+line or a configuration file.
+
+Since version Qemu 2.4 it is possible to specify a iSCSI request timeout to detect
+stalled requests and force a reestablishment of the session. The timeout
+is specified in seconds. The default is 0 which means no timeout. Libiscsi
+1.15.0 or greater is required for this feature.
+
+Example (without authentication):
+@example
+@value{qemu_system} -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
+                 -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
+                 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
+@end example
+
+Example (CHAP username/password via URL):
+@example
+@value{qemu_system} -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1
+@end example
+
+Example (CHAP username/password via environment variables):
+@example
+LIBISCSI_CHAP_USERNAME="user" \
+LIBISCSI_CHAP_PASSWORD="password" \
+@value{qemu_system} -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
+@end example
+
+@item NBD
+QEMU supports NBD (Network Block Devices) both using TCP protocol as well
+as Unix Domain Sockets.  With TCP, the default port is 10809.
+
+Syntax for specifying a NBD device using TCP, in preferred URI form:
+``nbd://<server-ip>[:<port>]/[<export>]''
+
+Syntax for specifying a NBD device using Unix Domain Sockets; remember
+that '?' is a shell glob character and may need quoting:
+``nbd+unix:///[<export>]?socket=<domain-socket>''
+
+Older syntax that is also recognized:
+``nbd:<server-ip>:<port>[:exportname=<export>]''
+
+Syntax for specifying a NBD device using Unix Domain Sockets
+``nbd:unix:<domain-socket>[:exportname=<export>]''
+
+Example for TCP
+@example
+@value{qemu_system} --drive file=nbd:192.0.2.1:30000
+@end example
+
+Example for Unix Domain Sockets
+@example
+@value{qemu_system} --drive file=nbd:unix:/tmp/nbd-socket
+@end example
+
+@item SSH
+QEMU supports SSH (Secure Shell) access to remote disks.
+
+Examples:
+@example
+@value{qemu_system} -drive file=ssh://user@@host/path/to/disk.img
+@value{qemu_system} -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
+@end example
+
+Currently authentication must be done using ssh-agent.  Other
+authentication methods may be supported in future.
+
+@item Sheepdog
+Sheepdog is a distributed storage system for QEMU.
+QEMU supports using either local sheepdog devices or remote networked
+devices.
+
+Syntax for specifying a sheepdog device
+@example
+sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag]
+@end example
+
+Example
+@example
+@value{qemu_system} --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
+@end example
+
+See also @url{https://sheepdog.github.io/sheepdog/}.
+
+@item GlusterFS
+GlusterFS is a user space distributed file system.
+QEMU supports the use of GlusterFS volumes for hosting VM disk images using
+TCP, Unix Domain Sockets and RDMA transport protocols.
+
+Syntax for specifying a VM disk image on GlusterFS volume is
+@example
+
+URI:
+gluster[+type]://[host[:port]]/volume/path[?socket=...][,debug=N][,logfile=...]
+
+JSON:
+'json:@{"driver":"qcow2","file":@{"driver":"gluster","volume":"testvol","path":"a.img","debug":N,"logfile":"...",
+@                                 "server":[@{"type":"tcp","host":"...","port":"..."@},
+@                                           @{"type":"unix","socket":"..."@}]@}@}'
+@end example
+
+
+Example
+@example
+URI:
+@value{qemu_system} --drive file=gluster://192.0.2.1/testvol/a.img,
+@                               file.debug=9,file.logfile=/var/log/qemu-gluster.log
+
+JSON:
+@value{qemu_system} 'json:@{"driver":"qcow2",
+@                          "file":@{"driver":"gluster",
+@                                   "volume":"testvol","path":"a.img",
+@                                   "debug":9,"logfile":"/var/log/qemu-gluster.log",
+@                                   "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@},
+@                                             @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}'
+@value{qemu_system} -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
+@                                      file.debug=9,file.logfile=/var/log/qemu-gluster.log,
+@                                      file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
+@                                      file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket
+@end example
+
+See also @url{http://www.gluster.org}.
+
+@item HTTP/HTTPS/FTP/FTPS
+QEMU supports read-only access to files accessed over http(s) and ftp(s).
+
+Syntax using a single filename:
+@example
+<protocol>://[<username>[:<password>]@@]<host>/<path>
+@end example
+
+where:
+@table @option
+@item protocol
+'http', 'https', 'ftp', or 'ftps'.
+
+@item username
+Optional username for authentication to the remote server.
+
+@item password
+Optional password for authentication to the remote server.
+
+@item host
+Address of the remote server.
+
+@item path
+Path on the remote server, including any query string.
+@end table
+
+The following options are also supported:
+@table @option
+@item url
+The full URL when passing options to the driver explicitly.
+
+@item readahead
+The amount of data to read ahead with each range request to the remote server.
+This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it
+does not have a suffix, it will be assumed to be in bytes. The value must be a
+multiple of 512 bytes. It defaults to 256k.
+
+@item sslverify
+Whether to verify the remote server's certificate when connecting over SSL. It
+can have the value 'on' or 'off'. It defaults to 'on'.
+
+@item cookie
+Send this cookie (it can also be a list of cookies separated by ';') with
+each outgoing request.  Only supported when using protocols such as HTTP
+which support cookies, otherwise ignored.
+
+@item timeout
+Set the timeout in seconds of the CURL connection. This timeout is the time
+that CURL waits for a response from the remote server to get the size of the
+image to be downloaded. If not set, the default timeout of 5 seconds is used.
+@end table
+
+Note that when passing options to qemu explicitly, @option{driver} is the value
+of <protocol>.
+
+Example: boot from a remote Fedora 20 live ISO image
+@example
+@value{qemu_system_x86} --drive media=cdrom,file=https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+
+@value{qemu_system_x86} --drive media=cdrom,file.driver=http,file.url=http://archives.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+@end example
+
+Example: boot from a remote Fedora 20 cloud image using a local overlay for
+writes, copy-on-read, and a readahead of 64k
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
+
+@value{qemu_system_x86} -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
+@end example
+
+Example: boot from an image stored on a VMware vSphere server with a self-signed
+certificate using a local overlay for writes, a readahead of 64k and a timeout
+of 10 seconds.
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10@}' /tmp/test.qcow2
+
+@value{qemu_system_x86} -drive file=/tmp/test.qcow2
+@end example
+
+@end table
+
+@c man end
+