docs: rstfy s390 dasd ipl documentation

While at it, also fix the numbering in 'What QEMU does'.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200213162942.14177-2-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

2 files changed, 63 insertions, 57 deletions

diff --git a/docs/devel/index.rst b/docs/devel/index.rst
index 4dc2ca8..b734ba4 100644
--- a/docs/devel/index.rst
+++ b/docs/devel/index.rst
@@ -25,3 +25,4 @@ Contents:
    tcg-plugins
    bitops
    reset
+   s390-dasd-ipl
diff --git a/docs/devel/s390-dasd-ipl.txt b/docs/devel/s390-dasd-ipl.rst
index 9107e04..2529eb5 100644
--- a/docs/devel/s390-dasd-ipl.txt
+++ b/docs/devel/s390-dasd-ipl.rst
@@ -1,49 +1,55 @@
-*****************************
-***** s390 hardware IPL *****
-*****************************
+Booting from real channel-attached devices on s390x
+===================================================
+
+s390 hardware IPL
+-----------------
 
 The s390 hardware IPL process consists of the following steps.
 
-1. A READ IPL ccw is constructed in memory location 0x0.
-    This ccw, by definition, reads the IPL1 record which is located on the disk
-    at cylinder 0 track 0 record 1. Note that the chain flag is on in this ccw
-    so when it is complete another ccw will be fetched and executed from memory
-    location 0x08.
-
-2. Execute the Read IPL ccw at 0x00, thereby reading IPL1 data into 0x00.
-    IPL1 data is 24 bytes in length and consists of the following pieces of
-    information: [psw][read ccw][tic ccw]. When the machine executes the Read
-    IPL ccw it read the 24-bytes of IPL1 to be read into memory starting at
-    location 0x0. Then the ccw program at 0x08 which consists of a read
-    ccw and a tic ccw is automatically executed because of the chain flag from
-    the original READ IPL ccw. The read ccw will read the IPL2 data into memory
-    and the TIC (Transfer In Channel) will transfer control to the channel
-    program contained in the IPL2 data. The TIC channel command is the
-    equivalent of a branch/jump/goto instruction for channel programs.
-    NOTE: The ccws in IPL1 are defined by the architecture to be format 0.
+1. A READ IPL ccw is constructed in memory location ``0x0``.
+   This ccw, by definition, reads the IPL1 record which is located on the disk
+   at cylinder 0 track 0 record 1. Note that the chain flag is on in this ccw
+   so when it is complete another ccw will be fetched and executed from memory
+   location ``0x08``.
+
+2. Execute the Read IPL ccw at ``0x00``, thereby reading IPL1 data into ``0x00``.
+   IPL1 data is 24 bytes in length and consists of the following pieces of
+   information: ``[psw][read ccw][tic ccw]``. When the machine executes the Read
+   IPL ccw it read the 24-bytes of IPL1 to be read into memory starting at
+   location ``0x0``. Then the ccw program at ``0x08`` which consists of a read
+   ccw and a tic ccw is automatically executed because of the chain flag from
+   the original READ IPL ccw. The read ccw will read the IPL2 data into memory
+   and the TIC (Transfer In Channel) will transfer control to the channel
+   program contained in the IPL2 data. The TIC channel command is the
+   equivalent of a branch/jump/goto instruction for channel programs.
+
+   NOTE: The ccws in IPL1 are defined by the architecture to be format 0.
 
 3. Execute IPL2.
-    The TIC ccw instruction at the end of the IPL1 channel program will begin
-    the execution of the IPL2 channel program. IPL2 is stage-2 of the boot
-    process and will contain a larger channel program than IPL1. The point of
-    IPL2 is to find and load either the operating system or a small program that
-    loads the operating system from disk. At the end of this step all or some of
-    the real operating system is loaded into memory and we are ready to hand
-    control over to the guest operating system. At this point the guest
-    operating system is entirely responsible for loading any more data it might
-    need to function. NOTE: The IPL2 channel program might read data into memory
-    location 0 thereby overwriting the IPL1 psw and channel program. This is ok
-    as long as the data placed in location 0 contains a psw whose instruction
-    address points to the guest operating system code to execute at the end of
-    the IPL/boot process.
-    NOTE: The ccws in IPL2 are defined by the architecture to be format 0.
+   The TIC ccw instruction at the end of the IPL1 channel program will begin
+   the execution of the IPL2 channel program. IPL2 is stage-2 of the boot
+   process and will contain a larger channel program than IPL1. The point of
+   IPL2 is to find and load either the operating system or a small program that
+   loads the operating system from disk. At the end of this step all or some of
+   the real operating system is loaded into memory and we are ready to hand
+   control over to the guest operating system. At this point the guest
+   operating system is entirely responsible for loading any more data it might
+   need to function.
+
+   NOTE: The IPL2 channel program might read data into memory
+   location ``0x0`` thereby overwriting the IPL1 psw and channel program. This is ok
+   as long as the data placed in location ``0x0`` contains a psw whose instruction
+   address points to the guest operating system code to execute at the end of
+   the IPL/boot process.
+
+   NOTE: The ccws in IPL2 are defined by the architecture to be format 0.
 
 4. Start executing the guest operating system.
-    The psw that was loaded into memory location 0 as part of the ipl process
-    should contain the needed flags for the operating system we have loaded. The
-    psw's instruction address will point to the location in memory where we want
-    to start executing the operating system. This psw is loaded (via LPSW
-    instruction) causing control to be passed to the operating system code.
+   The psw that was loaded into memory location ``0x0`` as part of the ipl process
+   should contain the needed flags for the operating system we have loaded. The
+   psw's instruction address will point to the location in memory where we want
+   to start executing the operating system. This psw is loaded (via LPSW
+   instruction) causing control to be passed to the operating system code.
 
 In a non-virtualized environment this process, handled entirely by the hardware,
 is kicked off by the user initiating a "Load" procedure from the hardware
@@ -54,18 +60,17 @@ written immediately after the special "Read IPL" ccw, the IPL1 channel program
 will be executed immediately (the special read ccw has the chaining bit turned
 on). The TIC at the end of the IPL1 channel program will cause the IPL2 channel
 program to be executed automatically. After this sequence completes the "Load"
-procedure then loads the psw from 0x0.
+procedure then loads the psw from ``0x0``.
 
-**********************************************************
-***** How this all pertains to QEMU (and the kernel) *****
-**********************************************************
+How this all pertains to QEMU (and the kernel)
+----------------------------------------------
 
 In theory we should merely have to do the following to IPL/boot a guest
 operating system from a DASD device:
 
-1. Place a "Read IPL" ccw into memory location 0x0 with chaining bit on.
-2. Execute channel program at 0x0.
-3. LPSW 0x0.
+1. Place a "Read IPL" ccw into memory location ``0x0`` with chaining bit on.
+2. Execute channel program at ``0x0``.
+3. LPSW ``0x0``.
 
 However, our emulation of the machine's channel program logic within the kernel
 is missing one key feature that is required for this process to work:
@@ -89,32 +94,31 @@ Lastly, in some cases (the zipl bootloader for example) the IPL2 program also
 transfers control to another channel program segment immediately after reading
 it from the disk. So we need to be able to handle this case.
 
-**************************
-***** What QEMU does *****
-**************************
+What QEMU does
+--------------
 
 Since we are forced to live with prefetch we cannot use the very simple IPL
 procedure we defined in the preceding section. So we compensate by doing the
 following.
 
-1. Place "Read IPL" ccw into memory location 0x0, but turn off chaining bit.
-2. Execute "Read IPL" at 0x0.
+1. Place "Read IPL" ccw into memory location ``0x0``, but turn off chaining bit.
+2. Execute "Read IPL" at ``0x0``.
 
-   So now IPL1's psw is at 0x0 and IPL1's channel program is at 0x08.
+   So now IPL1's psw is at ``0x0`` and IPL1's channel program is at ``0x08``.
 
-4. Write a custom channel program that will seek to the IPL2 record and then
+3. Write a custom channel program that will seek to the IPL2 record and then
    execute the READ and TIC ccws from IPL1.  Normally the seek is not required
    because after reading the IPL1 record the disk is automatically positioned
    to read the very next record which will be IPL2. But since we are not reading
    both IPL1 and IPL2 as part of the same channel program we must manually set
    the position.
 
-5. Grab the target address of the TIC instruction from the IPL1 channel program.
+4. Grab the target address of the TIC instruction from the IPL1 channel program.
    This address is where the IPL2 channel program starts.
 
    Now IPL2 is loaded into memory somewhere, and we know the address.
 
-6. Execute the IPL2 channel program at the address obtained in step #5.
+5. Execute the IPL2 channel program at the address obtained in step #4.
 
    Because this channel program can be dynamic, we must use a special algorithm
    that detects a READ immediately followed by a TIC and breaks the ccw chain
@@ -126,8 +130,9 @@ following.
    channel program from executing properly.
 
    Now the operating system code is loaded somewhere in guest memory and the psw
-   in memory location 0x0 will point to entry code for the guest operating
+   in memory location ``0x0`` will point to entry code for the guest operating
    system.
 
-7. LPSW 0x0.
+6. LPSW ``0x0``
+
    LPSW transfers control to the guest operating system and we're done.