diff options
| author | Philippe Mathieu-Daudé <f4bug@amsat.org> | 2019-10-28 19:04:04 -0400 |
|---|---|---|
| committer | Cleber Rosa <crosa@redhat.com> | 2019-10-28 19:04:04 -0400 |
| commit | 017aa60b253bcd0a5dd7e4e0b0c3d5c3c67154cf (patch) | |
| tree | d2d598239bf6a8c25caa5a53480d82d429d992fd /disas | |
| parent | 92d9361255a0862379866f156686180902bb63d2 (diff) | |
| download | qemu-017aa60b253bcd0a5dd7e4e0b0c3d5c3c67154cf.zip qemu-017aa60b253bcd0a5dd7e4e0b0c3d5c3c67154cf.tar.gz qemu-017aa60b253bcd0a5dd7e4e0b0c3d5c3c67154cf.tar.bz2 | |
tests/boot_linux_console: Add initrd test for the Exynos4210
This test boots a Linux kernel on a smdkc210 board and verify
the serial output is working.
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
This test can be run using:
$ IGNORE_AVOCADO_CONSOLE_BUG=yes \
avocado --show=app,console run -t machine:smdkc210 \
tests/acceptance/boot_linux_console.py
console: Booting Linux on physical CPU 0x900
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210
[...]
console: Samsung CPU ID: 0x43210211
console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0
console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632
console: Built 1 zonelists, mobility grouping on. Total pages: 249152
console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot
[...]
console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C: platform provided aux values permit register corruption.
console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C-310 erratum 769419 enabled
console: L2C-310 enabling early BRESP for Cortex-A9
console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9
console: L2C-310 ID prefetch enabled, offset 1 lines
console: L2C-310 dynamic clock gating disabled, standby mode disabled
console: L2C-310 cache controller enabled, 8 ways, 128 kB
console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001
console: Exynos4210 clocks: sclk_apll = 12000000, sclk_mpll = 12000000
console: sclk_epll = 12000000, sclk_vpll = 12000000, arm_clk = 12000000
[...]
console: s3c-i2c 13860000.i2c: slave address 0x00
console: s3c-i2c 13860000.i2c: bus frequency set to 93 KHz
console: s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
[...]
console: dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16
console: dma-pl330 12850000.mdma: PM domain LCD0 will not be powered off
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: Serial: AMBA driver
console: 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10
console: console [ttySAC0] enabled
console: 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10
console: 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10
console: 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10
[...]
console: Freeing unused kernel memory: 2048K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttySAC0
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: Boot successful.
PASS (37.98 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-25-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: removed conditional to skip test]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Diffstat (limited to 'disas')
0 files changed, 0 insertions, 0 deletions