Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging

ppc patch queue 2019-05-29

Next pull request against qemu-4.1.  Highlights:
  * KVM accelerated support for the XIVE interrupt controller in PAPR
    guests
  * A number of TCG vector fixes
  * Fixes for the PReP / 40p machine
  * Improvements to make check-tcg test coverage

Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.

This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22.  I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages).  I'm not entirely
certain, since I haven't reproduced exactly the same failure.

# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
  ppc/pnv: add dummy XSCOM registers for PRD initialization
  ppc/pnv: introduce new skiboot platform properties
  spapr: Don't migrate the hpt_maxpagesize cap to older machine types
  spapr: change default interrupt mode to 'dual'
  spapr/xive: fix multiple resets when using the 'dual' interrupt mode
  docs: provide documentation on the POWER9 XIVE interrupt controller
  spapr/irq: add KVM support to the 'dual' machine
  ppc/xics: fix irq priority in ics_set_irq_type()
  spapr/irq: initialize the IRQ device only once
  spapr/irq: introduce a spapr_irq_init_device() helper
  spapr: check for the activation of the KVM IRQ device
  spapr: introduce routines to delete the KVM IRQ device
  sysbus: add a sysbus_mmio_unmap() helper
  spapr/xive: activate KVM support
  spapr/xive: add migration support for KVM
  spapr/xive: introduce a VM state change handler
  spapr/xive: add state synchronization with KVM
  spapr/xive: add hcall support when under KVM
  spapr/xive: add KVM support
  spapr: Print out extra hints when CAS negotiation of interrupt mode fails
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 31 insertions, 18 deletions

diff --git a/configure b/configure
index 8148ac6..6cdcfb2 100755
--- a/configure
+++ b/configure
@@ -198,7 +198,7 @@ supported_kvm_target() {
         i386:i386 | i386:x86_64 | i386:x32 | \
         x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
         mips:mips | mipsel:mips | \
-        ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | \
+        ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | ppc64:ppc64le | \
         s390x:s390x)
             return 0
         ;;
@@ -502,8 +502,11 @@ cross_cc_arm="arm-linux-gnueabihf-gcc"
 cross_cc_cflags_armeb="-mbig-endian"
 cross_cc_i386="i386-pc-linux-gnu-gcc"
 cross_cc_cflags_i386=""
-cross_cc_powerpc="powerpc-linux-gnu-gcc"
-cross_cc_powerpc="powerpc-linux-gnu-gcc"
+cross_cc_ppc="powerpc-linux-gnu-gcc"
+cross_cc_cflags_ppc="-m32"
+cross_cc_ppc64="powerpc-linux-gnu-gcc"
+cross_cc_cflags_ppc64="-m64"
+cross_cc_ppc64le="powerpc64le-linux-gnu-gcc"
 
 enabled_cross_compilers=""
 
@@ -700,7 +703,11 @@ elif check_define __sparc__ ; then
   fi
 elif check_define _ARCH_PPC ; then
   if check_define _ARCH_PPC64 ; then
-    cpu="ppc64"
+    if check_define _LITTLE_ENDIAN ; then
+      cpu="ppc64le"
+    else
+      cpu="ppc64"
+    fi
   else
     cpu="ppc"
   fi
@@ -731,10 +738,14 @@ ARCH=
 # Note that this case should only have supported host CPUs, not guests.
 case "$cpu" in
   ppc|ppc64|s390|s390x|sparc64|x32|riscv32|riscv64)
-    cpu="$cpu"
     supported_cpu="yes"
     eval "cross_cc_${cpu}=\$host_cc"
   ;;
+  ppc64le)
+    ARCH="ppc64"
+    supported_cpu="yes"
+    cross_cc_ppc64le=$host_cc
+  ;;
   i386|i486|i586|i686|i86pc|BePC)
     cpu="i386"
     supported_cpu="yes"
@@ -1538,44 +1549,44 @@ case "$cpu" in
     ppc)
            CPU_CFLAGS="-m32"
            LDFLAGS="-m32 $LDFLAGS"
-           cross_cc_powerpc=$cc
-           cross_cc_cflags_powerpc=$CPU_CFLAGS
+           cross_cc_ppc=$cc
+           cross_cc_cflags_ppc="$CPU_CFLAGS"
            ;;
     ppc64)
            CPU_CFLAGS="-m64"
            LDFLAGS="-m64 $LDFLAGS"
            cross_cc_ppc64=$cc
-           cross_cc_cflags_ppc64=$CPU_CFLAGS
+           cross_cc_cflags_ppc64="$CPU_CFLAGS"
            ;;
     sparc)
            CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
            LDFLAGS="-m32 -mv8plus $LDFLAGS"
            cross_cc_sparc=$cc
-           cross_cc_cflags_sparc=$CPU_CFLAGS
+           cross_cc_cflags_sparc="$CPU_CFLAGS"
            ;;
     sparc64)
            CPU_CFLAGS="-m64 -mcpu=ultrasparc"
            LDFLAGS="-m64 $LDFLAGS"
            cross_cc_sparc64=$cc
-           cross_cc_cflags_sparc64=$CPU_CFLAGS
+           cross_cc_cflags_sparc64="$CPU_CFLAGS"
            ;;
     s390)
            CPU_CFLAGS="-m31"
            LDFLAGS="-m31 $LDFLAGS"
            cross_cc_s390=$cc
-           cross_cc_cflags_s390=$CPU_CFLAGS
+           cross_cc_cflags_s390="$CPU_CFLAGS"
            ;;
     s390x)
            CPU_CFLAGS="-m64"
            LDFLAGS="-m64 $LDFLAGS"
            cross_cc_s390x=$cc
-           cross_cc_cflags_s390x=$CPU_CFLAGS
+           cross_cc_cflags_s390x="$CPU_CFLAGS"
            ;;
     i386)
            CPU_CFLAGS="-m32"
            LDFLAGS="-m32 $LDFLAGS"
            cross_cc_i386=$cc
-           cross_cc_cflags_i386=$CPU_CFLAGS
+           cross_cc_cflags_i386="$CPU_CFLAGS"
            ;;
     x86_64)
            # ??? Only extremely old AMD cpus do not have cmpxchg16b.
@@ -1584,13 +1595,13 @@ case "$cpu" in
            CPU_CFLAGS="-m64 -mcx16"
            LDFLAGS="-m64 $LDFLAGS"
            cross_cc_x86_64=$cc
-           cross_cc_cflags_x86_64=$CPU_CFLAGS
+           cross_cc_cflags_x86_64="$CPU_CFLAGS"
            ;;
     x32)
            CPU_CFLAGS="-mx32"
            LDFLAGS="-mx32 $LDFLAGS"
            cross_cc_i386=$cc
-           cross_cc_cflags_i386=$CPU_CFLAGS
+           cross_cc_cflags_i386="$CPU_CFLAGS"
            ;;
     # No special flags required for other host CPUs
 esac
@@ -6198,7 +6209,7 @@ if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; } && \
         fi
     done
 fi
-if test "$cpu" = "ppc64" && test "$targetos" != "Darwin" ; then
+if test "$ARCH" = "ppc64" && test "$targetos" != "Darwin" ; then
   roms="$roms spapr-rtas"
 fi
 
@@ -7392,7 +7403,7 @@ if test "$linux" = "yes" ; then
   i386|x86_64|x32)
     linux_arch=x86
     ;;
-  ppc|ppc64)
+  ppc|ppc64|ppc64le)
     linux_arch=powerpc
     ;;
   s390x)
@@ -7553,7 +7564,8 @@ case "$target_name" in
   ;;
   ppc)
     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
-    target_compiler=$cross_cc_powerpc
+    target_compiler=$cross_cc_ppc
+    target_compiler_cflags="$cross_cc_cflags_ppc"
   ;;
   ppc64)
     TARGET_BASE_ARCH=ppc
@@ -7561,6 +7573,7 @@ case "$target_name" in
     mttcg=yes
     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
     target_compiler=$cross_cc_ppc64
+    target_compiler_cflags="$cross_cc_cflags_ppc64"
   ;;
   ppc64le)
     TARGET_ARCH=ppc64