block: add live block commit functionality

This adds the live commit coroutine.  This iteration focuses on the
commit only below the active layer, and not the active layer itself.

The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base.  At the end, intermediate images are deleted, and the
chain stitched together.  Images are restored to their original open
flags upon completion.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

2 files changed, 268 insertions, 0 deletions

diff --git a/block/Makefile.objs b/block/Makefile.objs
index a1ae67f..81fd43c 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -4,6 +4,7 @@ block-obj-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
 block-obj-y += qed-check.o
 block-obj-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
 block-obj-y += stream.o
+block-obj-y += commit.o
 block-obj-$(CONFIG_WIN32) += raw-win32.o
 block-obj-$(CONFIG_POSIX) += raw-posix.o
 block-obj-$(CONFIG_LIBISCSI) += iscsi.o
diff --git a/block/commit.c b/block/commit.c
new file mode 100644
index 0000000..624ec5f
--- /dev/null
+++ b/block/commit.c
@@ -0,0 +1,267 @@
+/*
+ * Live block commit
+ *
+ * Copyright Red Hat, Inc. 2012
+ *
+ * Authors:
+ *  Jeff Cody   <jcody@redhat.com>
+ *  Based on stream.c by Stefan Hajnoczi
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "trace.h"
+#include "block_int.h"
+#include "qemu/ratelimit.h"
+
+enum {
+    /*
+     * Size of data buffer for populating the image file.  This should be large
+     * enough to process multiple clusters in a single call, so that populating
+     * contiguous regions of the image is efficient.
+     */
+    COMMIT_BUFFER_SIZE = 512 * 1024, /* in bytes */
+};
+
+#define SLICE_TIME 100000000ULL /* ns */
+
+typedef struct CommitBlockJob {
+    BlockJob common;
+    RateLimit limit;
+    BlockDriverState *active;
+    BlockDriverState *top;
+    BlockDriverState *base;
+    BlockErrorAction on_error;
+    int base_flags;
+    int orig_overlay_flags;
+} CommitBlockJob;
+
+static int coroutine_fn commit_populate(BlockDriverState *bs,
+                                        BlockDriverState *base,
+                                        int64_t sector_num, int nb_sectors,
+                                        void *buf)
+{
+    int ret = 0;
+
+    ret = bdrv_read(bs, sector_num, buf, nb_sectors);
+    if (ret) {
+        return ret;
+    }
+
+    ret = bdrv_write(base, sector_num, buf, nb_sectors);
+    if (ret) {
+        return ret;
+    }
+
+    return 0;
+}
+
+static void coroutine_fn commit_run(void *opaque)
+{
+    CommitBlockJob *s = opaque;
+    BlockDriverState *active = s->active;
+    BlockDriverState *top = s->top;
+    BlockDriverState *base = s->base;
+    BlockDriverState *overlay_bs = NULL;
+    int64_t sector_num, end;
+    int ret = 0;
+    int n = 0;
+    void *buf;
+    int bytes_written = 0;
+    int64_t base_len;
+
+    ret = s->common.len = bdrv_getlength(top);
+
+
+    if (s->common.len < 0) {
+        goto exit_restore_reopen;
+    }
+
+    ret = base_len = bdrv_getlength(base);
+    if (base_len < 0) {
+        goto exit_restore_reopen;
+    }
+
+    if (base_len < s->common.len) {
+        ret = bdrv_truncate(base, s->common.len);
+        if (ret) {
+            goto exit_restore_reopen;
+        }
+    }
+
+    overlay_bs = bdrv_find_overlay(active, top);
+
+    end = s->common.len >> BDRV_SECTOR_BITS;
+    buf = qemu_blockalign(top, COMMIT_BUFFER_SIZE);
+
+    for (sector_num = 0; sector_num < end; sector_num += n) {
+        uint64_t delay_ns = 0;
+        bool copy;
+
+wait:
+        /* Note that even when no rate limit is applied we need to yield
+         * with no pending I/O here so that qemu_aio_flush() returns.
+         */
+        block_job_sleep_ns(&s->common, rt_clock, delay_ns);
+        if (block_job_is_cancelled(&s->common)) {
+            break;
+        }
+        /* Copy if allocated above the base */
+        ret = bdrv_co_is_allocated_above(top, base, sector_num,
+                                         COMMIT_BUFFER_SIZE / BDRV_SECTOR_SIZE,
+                                         &n);
+        copy = (ret == 1);
+        trace_commit_one_iteration(s, sector_num, n, ret);
+        if (copy) {
+            if (s->common.speed) {
+                delay_ns = ratelimit_calculate_delay(&s->limit, n);
+                if (delay_ns > 0) {
+                    goto wait;
+                }
+            }
+            ret = commit_populate(top, base, sector_num, n, buf);
+            bytes_written += n * BDRV_SECTOR_SIZE;
+        }
+        if (ret < 0) {
+            if (s->on_error == BLOCK_ERR_STOP_ANY    ||
+                s->on_error == BLOCK_ERR_REPORT      ||
+                (s->on_error == BLOCK_ERR_STOP_ENOSPC && ret == -ENOSPC)) {
+                goto exit_free_buf;
+            } else {
+                n = 0;
+                continue;
+            }
+        }
+        /* Publish progress */
+        s->common.offset += n * BDRV_SECTOR_SIZE;
+    }
+
+    ret = 0;
+
+    if (!block_job_is_cancelled(&s->common) && sector_num == end) {
+        /* success */
+        ret = bdrv_drop_intermediate(active, top, base);
+    }
+
+exit_free_buf:
+    qemu_vfree(buf);
+
+exit_restore_reopen:
+    /* restore base open flags here if appropriate (e.g., change the base back
+     * to r/o). These reopens do not need to be atomic, since we won't abort
+     * even on failure here */
+    if (s->base_flags != bdrv_get_flags(base)) {
+        bdrv_reopen(base, s->base_flags, NULL);
+    }
+    if (s->orig_overlay_flags != bdrv_get_flags(overlay_bs)) {
+        bdrv_reopen(overlay_bs, s->orig_overlay_flags, NULL);
+    }
+
+    block_job_complete(&s->common, ret);
+}
+
+static void commit_set_speed(BlockJob *job, int64_t speed, Error **errp)
+{
+    CommitBlockJob *s = container_of(job, CommitBlockJob, common);
+
+    if (speed < 0) {
+        error_set(errp, QERR_INVALID_PARAMETER, "speed");
+        return;
+    }
+    ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
+}
+
+static BlockJobType commit_job_type = {
+    .instance_size = sizeof(CommitBlockJob),
+    .job_type      = "commit",
+    .set_speed     = commit_set_speed,
+};
+
+void commit_start(BlockDriverState *bs, BlockDriverState *base,
+                  BlockDriverState *top, int64_t speed,
+                  BlockErrorAction on_error, BlockDriverCompletionFunc *cb,
+                  void *opaque, Error **errp)
+{
+    CommitBlockJob *s;
+    BlockReopenQueue *reopen_queue = NULL;
+    int orig_overlay_flags;
+    int orig_base_flags;
+    BlockDriverState *overlay_bs;
+    Error *local_err = NULL;
+
+    if ((on_error == BLOCK_ERR_STOP_ANY ||
+         on_error == BLOCK_ERR_STOP_ENOSPC) &&
+        !bdrv_iostatus_is_enabled(bs)) {
+        error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
+        return;
+    }
+
+    /* Once we support top == active layer, remove this check */
+    if (top == bs) {
+        error_setg(errp,
+                   "Top image as the active layer is currently unsupported");
+        return;
+    }
+
+    if (top == base) {
+        error_setg(errp, "Invalid files for merge: top and base are the same");
+        return;
+    }
+
+    /* top and base may be valid, but let's make sure that base is reachable
+     * from top */
+    if (bdrv_find_backing_image(top, base->filename) != base) {
+        error_setg(errp,
+                   "Base (%s) is not reachable from top (%s)",
+                   base->filename, top->filename);
+        return;
+    }
+
+    overlay_bs = bdrv_find_overlay(bs, top);
+
+    if (overlay_bs == NULL) {
+        error_setg(errp, "Could not find overlay image for %s:", top->filename);
+        return;
+    }
+
+    orig_base_flags    = bdrv_get_flags(base);
+    orig_overlay_flags = bdrv_get_flags(overlay_bs);
+
+    /* convert base & overlay_bs to r/w, if necessary */
+    if (!(orig_base_flags & BDRV_O_RDWR)) {
+        reopen_queue = bdrv_reopen_queue(reopen_queue, base,
+                                         orig_base_flags | BDRV_O_RDWR);
+    }
+    if (!(orig_overlay_flags & BDRV_O_RDWR)) {
+        reopen_queue = bdrv_reopen_queue(reopen_queue, overlay_bs,
+                                         orig_overlay_flags | BDRV_O_RDWR);
+    }
+    if (reopen_queue) {
+        bdrv_reopen_multiple(reopen_queue, &local_err);
+        if (local_err != NULL) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+
+
+    s = block_job_create(&commit_job_type, bs, speed, cb, opaque, errp);
+    if (!s) {
+        return;
+    }
+
+    s->base   = base;
+    s->top    = top;
+    s->active = bs;
+
+    s->base_flags          = orig_base_flags;
+    s->orig_overlay_flags  = orig_overlay_flags;
+
+    s->on_error = on_error;
+    s->common.co = qemu_coroutine_create(commit_run);
+
+    trace_commit_start(bs, base, top, s, s->common.co, opaque);
+    qemu_coroutine_enter(s->common.co, s);
+}