hw/net/cadence_gem: use FIELD to describe DMACFG register fields

Use de FIELD macro to describe the DMACFG register fields.

Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-6-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 31 insertions, 17 deletions

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index cf8b126..e3724b8 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -110,7 +110,27 @@ REG32(NWCFG, 0x4) /* Network Config reg */
 
 REG32(NWSTATUS, 0x8) /* Network Status reg */
 REG32(USERIO, 0xc) /* User IO reg */
+
 REG32(DMACFG, 0x10) /* DMA Control reg */
+    FIELD(DMACFG, SEND_BCAST_TO_ALL_QS, 31, 1)
+    FIELD(DMACFG, DMA_ADDR_BUS_WIDTH, 30, 1)
+    FIELD(DMACFG, TX_BD_EXT_MODE_EN , 29, 1)
+    FIELD(DMACFG, RX_BD_EXT_MODE_EN , 28, 1)
+    FIELD(DMACFG, FORCE_MAX_AMBA_BURST_TX, 26, 1)
+    FIELD(DMACFG, FORCE_MAX_AMBA_BURST_RX, 25, 1)
+    FIELD(DMACFG, FORCE_DISCARD_ON_ERR, 24, 1)
+    FIELD(DMACFG, RX_BUF_SIZE, 16, 8)
+    FIELD(DMACFG, CRC_ERROR_REPORT, 13, 1)
+    FIELD(DMACFG, INF_LAST_DBUF_SIZE_EN, 12, 1)
+    FIELD(DMACFG, TX_PBUF_CSUM_OFFLOAD, 11, 1)
+    FIELD(DMACFG, TX_PBUF_SIZE, 10, 1)
+    FIELD(DMACFG, RX_PBUF_SIZE, 8, 2)
+    FIELD(DMACFG, ENDIAN_SWAP_PACKET, 7, 1)
+    FIELD(DMACFG, ENDIAN_SWAP_MGNT, 6, 1)
+    FIELD(DMACFG, HDR_DATA_SPLIT_EN, 5, 1)
+    FIELD(DMACFG, AMBA_BURST_LEN , 0, 5)
+#define GEM_DMACFG_RBUFSZ_MUL  64         /* DMA RX Buffer Size multiplier */
+
 REG32(TXSTATUS, 0x14) /* TX Status reg */
 REG32(RXQBASE, 0x18) /* RX Q Base address reg */
 REG32(TXQBASE, 0x1c) /* TX Q Base address reg */
@@ -265,13 +285,6 @@ REG32(TYPE2_COMPARE_0_WORD_1, 0x704)
     FIELD(TYPE2_COMPARE_0_WORD_1, COMPARE_VLAN_ID, 10, 1)
 
 /*****************************************/
-#define GEM_DMACFG_ADDR_64B    (1U << 30)
-#define GEM_DMACFG_TX_BD_EXT   (1U << 29)
-#define GEM_DMACFG_RX_BD_EXT   (1U << 28)
-#define GEM_DMACFG_RBUFSZ_M    0x00FF0000 /* DMA RX Buffer Size mask */
-#define GEM_DMACFG_RBUFSZ_S    16         /* DMA RX Buffer Size shift */
-#define GEM_DMACFG_RBUFSZ_MUL  64         /* DMA RX Buffer Size multiplier */
-#define GEM_DMACFG_TXCSUM_OFFL 0x00000800 /* Transmit checksum offload */
 
 #define GEM_TXSTATUS_TXCMPL    0x00000020 /* Transmit Complete */
 #define GEM_TXSTATUS_USED      0x00000001 /* sw owned descriptor encountered */
@@ -369,7 +382,7 @@ static inline uint64_t tx_desc_get_buffer(CadenceGEMState *s, uint32_t *desc)
 {
     uint64_t ret = desc[0];
 
-    if (s->regs[R_DMACFG] & GEM_DMACFG_ADDR_64B) {
+    if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, DMA_ADDR_BUS_WIDTH)) {
         ret |= (uint64_t)desc[2] << 32;
     }
     return ret;
@@ -414,7 +427,7 @@ static inline uint64_t rx_desc_get_buffer(CadenceGEMState *s, uint32_t *desc)
 {
     uint64_t ret = desc[0] & ~0x3UL;
 
-    if (s->regs[R_DMACFG] & GEM_DMACFG_ADDR_64B) {
+    if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, DMA_ADDR_BUS_WIDTH)) {
         ret |= (uint64_t)desc[2] << 32;
     }
     return ret;
@@ -424,11 +437,11 @@ static inline int gem_get_desc_len(CadenceGEMState *s, bool rx_n_tx)
 {
     int ret = 2;
 
-    if (s->regs[R_DMACFG] & GEM_DMACFG_ADDR_64B) {
+    if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, DMA_ADDR_BUS_WIDTH)) {
         ret += 2;
     }
-    if (s->regs[R_DMACFG] & (rx_n_tx ? GEM_DMACFG_RX_BD_EXT
-                                       : GEM_DMACFG_TX_BD_EXT)) {
+    if (s->regs[R_DMACFG] & (rx_n_tx ? R_DMACFG_RX_BD_EXT_MODE_EN_MASK
+                                     : R_DMACFG_TX_BD_EXT_MODE_EN_MASK)) {
         ret += 2;
     }
 
@@ -942,7 +955,7 @@ static hwaddr gem_get_desc_addr(CadenceGEMState *s, bool tx, int q)
 {
     hwaddr desc_addr = 0;
 
-    if (s->regs[R_DMACFG] & GEM_DMACFG_ADDR_64B) {
+    if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, DMA_ADDR_BUS_WIDTH)) {
         desc_addr = s->regs[tx ? R_TBQPH : R_RBQPH];
     }
     desc_addr <<= 32;
@@ -1024,8 +1037,9 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
     /* The configure size of each receive buffer.  Determines how many
      * buffers needed to hold this packet.
      */
-    rxbufsize = ((s->regs[R_DMACFG] & GEM_DMACFG_RBUFSZ_M) >>
-                 GEM_DMACFG_RBUFSZ_S) * GEM_DMACFG_RBUFSZ_MUL;
+    rxbufsize = FIELD_EX32(s->regs[R_DMACFG], DMACFG, RX_BUF_SIZE);
+    rxbufsize *= GEM_DMACFG_RBUFSZ_MUL;
+
     bytes_to_copy = size;
 
     /* Hardware allows a zero value here but warns against it. To avoid QEMU
@@ -1308,7 +1322,7 @@ static void gem_transmit(CadenceGEMState *s)
                 gem_update_int_status(s);
 
                 /* Is checksum offload enabled? */
-                if (s->regs[R_DMACFG] & GEM_DMACFG_TXCSUM_OFFL) {
+                if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, TX_PBUF_CSUM_OFFLOAD)) {
                     net_checksum_calculate(s->tx_packet, total_bytes, CSUM_ALL);
                 }
 
@@ -1332,7 +1346,7 @@ static void gem_transmit(CadenceGEMState *s)
 
             /* read next descriptor */
             if (tx_desc_get_wrap(desc)) {
-                if (s->regs[R_DMACFG] & GEM_DMACFG_ADDR_64B) {
+                if (FIELD_EX32(s->regs[R_DMACFG], DMACFG, DMA_ADDR_BUS_WIDTH)) {
                     packet_desc_addr = s->regs[R_TBQPH];
                     packet_desc_addr <<= 32;
                 } else {