Eepro100 emulation, by Stefan Weil.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2584 c046a42c-6fe2-441c-8c8c-71466251a162

6 files changed, 2088 insertions, 1 deletions

diff --git a/Makefile.target b/Makefile.target
index f1fbc57..323961a 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -395,8 +395,14 @@ VL_OBJS+= scsi-disk.o cdrom.o lsi53c895a.o
 # USB layer
 VL_OBJS+= usb.o usb-hub.o usb-linux.o usb-hid.o usb-ohci.o usb-msd.o
 
+# EEPROM emulation
+VL_OBJS += eeprom93xx.o
+
 # PCI network cards
-VL_OBJS+= ne2000.o rtl8139.o pcnet.o
+VL_OBJS += eepro100.o
+VL_OBJS += ne2000.o
+VL_OBJS += pcnet.o
+VL_OBJS += rtl8139.o
 
 ifeq ($(TARGET_BASE_ARCH), i386)
 # Hardware support
diff --git a/hw/eepro100.c b/hw/eepro100.c
new file mode 100644
index 0000000..ea18b89
--- /dev/null
+++ b/hw/eepro100.c
@@ -0,0 +1,1714 @@
+/*
+ * QEMU i8255x (PRO100) emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * Portions of the code are copies from grub / etherboot eepro100.c
+ * and linux e100.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Tested features (i82559):
+ *      PXE boot (i386) no valid link
+ *      Linux networking (i386) ok
+ *
+ * Untested:
+ *      non-i386 platforms
+ *      Windows networking
+ *
+ * References:
+ *
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family
+ * Open Source Software Developer Manual
+ */
+
+#if defined(TARGET_I386)
+# warning "PXE boot still not working!"
+#endif
+
+#include <assert.h>
+#include <stddef.h>             /* offsetof */
+#include "vl.h"
+#include "eeprom93xx.h"
+
+/* Common declarations for all PCI devices. */
+
+#define PCI_VENDOR_ID           0x00    /* 16 bits */
+#define PCI_DEVICE_ID           0x02    /* 16 bits */
+#define PCI_COMMAND             0x04    /* 16 bits */
+#define PCI_STATUS              0x06    /* 16 bits */
+
+#define PCI_REVISION_ID         0x08    /* 8 bits  */
+#define PCI_CLASS_CODE          0x0b    /* 8 bits */
+#define PCI_SUBCLASS_CODE       0x0a    /* 8 bits */
+#define PCI_HEADER_TYPE         0x0e    /* 8 bits */
+
+#define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
+#define PCI_BASE_ADDRESS_1      0x14    /* 32 bits */
+#define PCI_BASE_ADDRESS_2      0x18    /* 32 bits */
+#define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
+#define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
+#define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
+
+#define PCI_CONFIG_8(offset, value) \
+    (pci_conf[offset] = (value))
+#define PCI_CONFIG_16(offset, value) \
+    (*(uint16_t *)&pci_conf[offset] = cpu_to_le16(value))
+#define PCI_CONFIG_32(offset, value) \
+    (*(uint32_t *)&pci_conf[offset] = cpu_to_le32(value))
+
+#define KiB 1024
+
+/* debug EEPRO100 card */
+//~ #define DEBUG_EEPRO100
+
+#ifdef DEBUG_EEPRO100
+#define logout(fmt, args...) fprintf(stderr, "EE100\t%-24s" fmt, __func__, ##args)
+#else
+#define logout(fmt, args...) ((void)0)
+#endif
+
+/* Set flags to 0 to disable debug output. */
+#define MDI     0
+
+#define TRACE(flag, command) ((flag) ? (command) : (void)0)
+
+#define missing(text)       assert(!"feature is missing in this emulation: " text)
+
+#define MAX_ETH_FRAME_SIZE 1514
+
+/* This driver supports several different devices which are declared here. */
+#define i82551          0x82551
+#define i82557B         0x82557b
+#define i82557C         0x82557c
+#define i82558B         0x82558b
+#define i82559C         0x82559c
+#define i82559ER        0x82559e
+#define i82562          0x82562
+
+#define EEPROM_SIZE     64
+
+#define PCI_MEM_SIZE            (4 * KiB)
+#define PCI_IO_SIZE             64
+#define PCI_FLASH_SIZE          (128 * KiB)
+
+#define BIT(n) (1 << (n))
+#define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m)
+
+/* The SCB accepts the following controls for the Tx and Rx units: */
+#define  CU_NOP         0x0000  /* No operation. */
+#define  CU_START       0x0010  /* CU start. */
+#define  CU_RESUME      0x0020  /* CU resume. */
+#define  CU_STATSADDR   0x0040  /* Load dump counters address. */
+#define  CU_SHOWSTATS   0x0050  /* Dump statistical counters. */
+#define  CU_CMD_BASE    0x0060  /* Load CU base address. */
+#define  CU_DUMPSTATS   0x0070  /* Dump and reset statistical counters. */
+#define  CU_SRESUME     0x00a0  /* CU static resume. */
+
+#define  RU_NOP         0x0000
+#define  RX_START       0x0001
+#define  RX_RESUME      0x0002
+#define  RX_ABORT       0x0004
+#define  RX_ADDR_LOAD   0x0006
+#define  RX_RESUMENR    0x0007
+#define INT_MASK        0x0100
+#define DRVR_INT        0x0200  /* Driver generated interrupt. */
+
+typedef unsigned char bool;
+
+/* Offsets to the various registers.
+   All accesses need not be longword aligned. */
+enum speedo_offsets {
+    SCBStatus = 0,
+    SCBAck = 1,
+    SCBCmd = 2,                 /* Rx/Command Unit command and status. */
+    SCBIntmask = 3,
+    SCBPointer = 4,             /* General purpose pointer. */
+    SCBPort = 8,                /* Misc. commands and operands.  */
+    SCBflash = 12, SCBeeprom = 14,      /* EEPROM and flash memory control. */
+    SCBCtrlMDI = 16,            /* MDI interface control. */
+    SCBEarlyRx = 20,            /* Early receive byte count. */
+};
+
+/* A speedo3 transmit buffer descriptor with two buffers... */
+typedef struct {
+    uint16_t status;
+    uint16_t command;
+    uint32_t link;              /* void * */
+    uint32_t tx_desc_addr;      /* transmit buffer decsriptor array address. */
+    uint16_t tcb_bytes;         /* transmit command block byte count (in lower 14 bits */
+    uint8_t tx_threshold;       /* transmit threshold */
+    uint8_t tbd_count;          /* TBD number */
+    //~ /* This constitutes two "TBD" entries: hdr and data */
+    //~ uint32_t tx_buf_addr0;  /* void *, header of frame to be transmitted.  */
+    //~ int32_t  tx_buf_size0;  /* Length of Tx hdr. */
+    //~ uint32_t tx_buf_addr1;  /* void *, data to be transmitted.  */
+    //~ int32_t  tx_buf_size1;  /* Length of Tx data. */
+} eepro100_tx_t;
+
+/* Receive frame descriptor. */
+typedef struct {
+    int16_t status;
+    uint16_t command;
+    uint32_t link;              /* struct RxFD * */
+    uint32_t rx_buf_addr;       /* void * */
+    uint16_t count;
+    uint16_t size;
+    char packet[MAX_ETH_FRAME_SIZE + 4];
+} eepro100_rx_t;
+
+typedef struct {
+    uint32_t tx_good_frames, tx_max_collisions, tx_late_collisions,
+        tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+        tx_multiple_collisions, tx_total_collisions;
+    uint32_t rx_good_frames, rx_crc_errors, rx_alignment_errors,
+        rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+        rx_short_frame_errors;
+    uint32_t fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+    uint16_t xmt_tco_frames, rcv_tco_frames;
+    uint32_t complete;
+} eepro100_stats_t;
+
+typedef enum {
+    cu_idle = 0,
+    cu_suspended = 1,
+    cu_active = 2,
+    cu_lpq_active = 2,
+    cu_hqp_active = 3
+} cu_state_t;
+
+typedef enum {
+    ru_idle = 0,
+    ru_suspended = 1,
+    ru_no_resources = 2,
+    ru_ready = 4
+} ru_state_t;
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b)	b,a
+#else
+#define X(a,b)	a,b
+#endif
+
+typedef struct {
+#if 1
+    uint8_t cmd;
+    uint32_t start;
+    uint32_t stop;
+    uint8_t boundary;
+    uint8_t tsr;
+    uint8_t tpsr;
+    uint16_t tcnt;
+    uint16_t rcnt;
+    uint32_t rsar;
+    uint8_t rsr;
+    uint8_t rxcr;
+    uint8_t isr;
+    uint8_t dcfg;
+    uint8_t imr;
+    uint8_t phys[6];            /* mac address */
+    uint8_t curpag;
+    uint8_t mult[8];            /* multicast mask array */
+    int mmio_index;
+    PCIDevice *pci_dev;
+    VLANClientState *vc;
+#endif
+    uint8_t scb_stat;           /* SCB stat/ack byte */
+    uint8_t int_stat;           /* PCI interrupt status */
+    uint32_t region[3];         /* PCI region addresses */
+    uint8_t macaddr[6];
+    uint32_t statcounter[19];
+    uint16_t mdimem[32];
+    eeprom_t *eeprom;
+    uint32_t device;            /* device variant */
+    uint32_t pointer;
+    /* (cu_base + cu_offset) address the next command block in the command block list. */
+    uint32_t cu_base;           /* CU base address */
+    uint32_t cu_offset;         /* CU address offset */
+    /* (ru_base + ru_offset) address the RFD in the Receive Frame Area. */
+    uint32_t ru_base;           /* RU base address */
+    uint32_t ru_offset;         /* RU address offset */
+    uint32_t statsaddr;         /* pointer to eepro100_stats_t */
+    eepro100_stats_t statistics;        /* statistical counters */
+#if 0
+    uint16_t status;
+#endif
+
+    /* Configuration bytes. */
+    uint8_t configuration[22];
+
+    /* Data in mem is always in the byte order of the controller (le). */
+    uint8_t mem[PCI_MEM_SIZE];
+} EEPRO100State;
+
+/* Default values for MDI (PHY) registers */
+static const uint16_t eepro100_mdi_default[] = {
+    /* MDI Registers 0 - 6, 7 */
+    0x3000, 0x780d, 0x02a8, 0x0154, 0x05e1, 0x0000, 0x0000, 0x0000,
+    /* MDI Registers 8 - 15 */
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    /* MDI Registers 16 - 31 */
+    0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+/* Readonly mask for MDI (PHY) registers */
+static const uint16_t eepro100_mdi_mask[] = {
+    0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
+    0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+    0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+#define POLYNOMIAL 0x04c11db6
+
+/* From FreeBSD */
+/* XXX: optimize */
+static int compute_mcast_idx(const uint8_t * ep)
+{
+    uint32_t crc;
+    int carry, i, j;
+    uint8_t b;
+
+    crc = 0xffffffff;
+    for (i = 0; i < 6; i++) {
+        b = *ep++;
+        for (j = 0; j < 8; j++) {
+            carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
+            crc <<= 1;
+            b >>= 1;
+            if (carry)
+                crc = ((crc ^ POLYNOMIAL) | carry);
+        }
+    }
+    return (crc >> 26);
+}
+
+#if defined(DEBUG_EEPRO100)
+static const char *nic_dump(const uint8_t * buf, unsigned size)
+{
+    static char dump[3 * 16 + 1];
+    char *p = &dump[0];
+    if (size > 16)
+        size = 16;
+    while (size-- > 0) {
+        p += sprintf(p, " %02x", *buf++);
+    }
+    return dump;
+}
+#endif                          /* DEBUG_EEPRO100 */
+
+enum scb_stat_ack {
+    stat_ack_not_ours = 0x00,
+    stat_ack_sw_gen = 0x04,
+    stat_ack_rnr = 0x10,
+    stat_ack_cu_idle = 0x20,
+    stat_ack_frame_rx = 0x40,
+    stat_ack_cu_cmd_done = 0x80,
+    stat_ack_not_present = 0xFF,
+    stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+    stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+static void disable_interrupt(EEPRO100State * s)
+{
+    if (s->int_stat) {
+        logout("interrupt disabled\n");
+        pci_set_irq(s->pci_dev, 0, 0);
+        s->int_stat = 0;
+    }
+}
+
+static void enable_interrupt(EEPRO100State * s)
+{
+    if (!s->int_stat) {
+        logout("interrupt enabled\n");
+        pci_set_irq(s->pci_dev, 0, 1);
+        s->int_stat = 1;
+    }
+}
+
+static void eepro100_acknowledge(EEPRO100State * s)
+{
+    s->scb_stat &= ~s->mem[SCBAck];
+    s->mem[SCBAck] = s->scb_stat;
+    if (s->scb_stat == 0) {
+        disable_interrupt(s);
+    }
+}
+
+static void eepro100_interrupt(EEPRO100State * s, uint8_t stat)
+{
+    uint8_t mask = ~s->mem[SCBIntmask];
+    s->mem[SCBAck] |= stat;
+    stat = s->scb_stat = s->mem[SCBAck];
+    stat &= (mask | 0x0f);
+    //~ stat &= (~s->mem[SCBIntmask] | 0x0xf);
+    if (stat && (mask & 0x01)) {
+        /* SCB mask and SCB Bit M do not disable interrupt. */
+        enable_interrupt(s);
+    } else if (s->int_stat) {
+        disable_interrupt(s);
+    }
+}
+
+static void eepro100_cx_interrupt(EEPRO100State * s)
+{
+    /* CU completed action command. */
+    /* Transmit not ok (82557 only, not in emulation). */
+    eepro100_interrupt(s, 0x80);
+}
+
+static void eepro100_cna_interrupt(EEPRO100State * s)
+{
+    /* CU left the active state. */
+    eepro100_interrupt(s, 0x20);
+}
+
+static void eepro100_fr_interrupt(EEPRO100State * s)
+{
+    /* RU received a complete frame. */
+    eepro100_interrupt(s, 0x40);
+}
+
+#if 0
+static void eepro100_rnr_interrupt(EEPRO100State * s)
+{
+    /* RU is not ready. */
+    eepro100_interrupt(s, 0x10);
+}
+#endif
+
+static void eepro100_mdi_interrupt(EEPRO100State * s)
+{
+    /* MDI completed read or write cycle. */
+    eepro100_interrupt(s, 0x08);
+}
+
+static void eepro100_swi_interrupt(EEPRO100State * s)
+{
+    /* Software has requested an interrupt. */
+    eepro100_interrupt(s, 0x04);
+}
+
+#if 0
+static void eepro100_fcp_interrupt(EEPRO100State * s)
+{
+    /* Flow control pause interrupt (82558 and later). */
+    eepro100_interrupt(s, 0x01);
+}
+#endif
+
+static void pci_reset(EEPRO100State * s)
+{
+    uint32_t device = s->device;
+    uint8_t *pci_conf = s->pci_dev->config;
+
+    logout("%p\n", s);
+
+    /* PCI Vendor ID */
+    PCI_CONFIG_16(PCI_VENDOR_ID, 0x8086);
+    /* PCI Device ID */
+    PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+    /* PCI Command */
+    PCI_CONFIG_16(PCI_COMMAND, 0x0000);
+    /* PCI Status */
+    PCI_CONFIG_16(PCI_STATUS, 0x2800);
+    /* PCI Revision ID */
+    PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
+    /* PCI Class Code */
+    PCI_CONFIG_8(0x09, 0x00);
+    PCI_CONFIG_8(PCI_SUBCLASS_CODE, 0x00);      // ethernet network controller
+    PCI_CONFIG_8(PCI_CLASS_CODE, 0x02); // network controller
+    /* PCI Cache Line Size */
+    /* check cache line size!!! */
+    //~ PCI_CONFIG_8(0x0c, 0x00);
+    /* PCI Latency Timer */
+    PCI_CONFIG_8(0x0d, 0x20);   // latency timer = 32 clocks
+    /* PCI Header Type */
+    /* BIST (built-in self test) */
+#if defined(TARGET_I386)
+// !!! workaround for buggy bios
+//~ #define PCI_ADDRESS_SPACE_MEM_PREFETCH 0
+#endif
+#if 0
+    /* PCI Base Address Registers */
+    /* CSR Memory Mapped Base Address */
+    PCI_CONFIG_32(PCI_BASE_ADDRESS_0,
+                  PCI_ADDRESS_SPACE_MEM | PCI_ADDRESS_SPACE_MEM_PREFETCH);
+    /* CSR I/O Mapped Base Address */
+    PCI_CONFIG_32(PCI_BASE_ADDRESS_1, PCI_ADDRESS_SPACE_IO);
+#if 0
+    /* Flash Memory Mapped Base Address */
+    PCI_CONFIG_32(PCI_BASE_ADDRESS_2, 0xfffe0000 | PCI_ADDRESS_SPACE_MEM);
+#endif
+#endif
+    /* Expansion ROM Base Address (depends on boot disable!!!) */
+    PCI_CONFIG_32(0x30, 0x00000000);
+    /* Capability Pointer */
+    PCI_CONFIG_8(0x34, 0xdc);
+    /* Interrupt Pin */
+    PCI_CONFIG_8(0x3d, 1);      // interrupt pin 0
+    /* Minimum Grant */
+    PCI_CONFIG_8(0x3e, 0x08);
+    /* Maximum Latency */
+    PCI_CONFIG_8(0x3f, 0x18);
+    /* Power Management Capabilities / Next Item Pointer / Capability ID */
+    PCI_CONFIG_32(0xdc, 0x7e210001);
+
+    switch (device) {
+    case i82551:
+        //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+        PCI_CONFIG_8(PCI_REVISION_ID, 0x0f);
+        break;
+    case i82557B:
+        PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+        PCI_CONFIG_8(PCI_REVISION_ID, 0x02);
+        break;
+    case i82557C:
+        PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+        PCI_CONFIG_8(PCI_REVISION_ID, 0x03);
+        break;
+    case i82558B:
+        PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+        PCI_CONFIG_16(PCI_STATUS, 0x2810);
+        PCI_CONFIG_8(PCI_REVISION_ID, 0x05);
+        break;
+    case i82559C:
+        PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+        PCI_CONFIG_16(PCI_STATUS, 0x2810);
+        //~ PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
+        break;
+    case i82559ER:
+        //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+        PCI_CONFIG_16(PCI_STATUS, 0x2810);
+        PCI_CONFIG_8(PCI_REVISION_ID, 0x09);
+        break;
+    //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1029);
+    //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1030);       /* 82559 InBusiness 10/100 */
+    default:
+        logout("Device %X is undefined!\n", device);
+    }
+
+    if (device == i82557C || device == i82558B || device == i82559C) {
+        logout("Get device id and revision from EEPROM!!!\n");
+    }
+}
+
+static void nic_selective_reset(EEPRO100State * s)
+{
+    size_t i;
+    uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom);
+    //~ eeprom93xx_reset(s->eeprom);
+    memcpy(eeprom_contents, s->macaddr, 6);
+    eeprom_contents[0xa] = 0x4000;
+    uint16_t sum = 0;
+    for (i = 0; i < EEPROM_SIZE - 1; i++) {
+        sum += eeprom_contents[i];
+    }
+    eeprom_contents[EEPROM_SIZE - 1] = 0xbaba - sum;
+
+    memset(s->mem, 0, sizeof(s->mem));
+    uint32_t val = BIT(21);
+    memcpy(&s->mem[SCBCtrlMDI], &val, sizeof(val));
+
+    assert(sizeof(s->mdimem) == sizeof(eepro100_mdi_default));
+    memcpy(&s->mdimem[0], &eepro100_mdi_default[0], sizeof(s->mdimem));
+}
+
+static void nic_reset(void *opaque)
+{
+    EEPRO100State *s = (EEPRO100State *) opaque;
+    logout("%p\n", s);
+    static int first;
+    if (!first) {
+        first = 1;
+    }
+    nic_selective_reset(s);
+}
+
+#if defined(DEBUG_EEPRO100)
+static const char *reg[PCI_IO_SIZE / 4] = {
+    "Command/Status",
+    "General Pointer",
+    "Port",
+    "EEPROM/Flash Control",
+    "MDI Control",
+    "Receive DMA Byte Count",
+    "Flow control register",
+    "General Status/Control"
+};
+
+static char *regname(uint32_t addr)
+{
+    static char buf[16];
+    if (addr < PCI_IO_SIZE) {
+        const char *r = reg[addr / 4];
+        if (r != 0) {
+            sprintf(buf, "%s+%u", r, addr % 4);
+        } else {
+            sprintf(buf, "0x%02x", addr);
+        }
+    } else {
+        sprintf(buf, "??? 0x%08x", addr);
+    }
+    return buf;
+}
+#endif                          /* DEBUG_EEPRO100 */
+
+#if 0
+static uint16_t eepro100_read_status(EEPRO100State * s)
+{
+    uint16_t val = s->status;
+    logout("val=0x%04x\n", val);
+    return val;
+}
+
+static void eepro100_write_status(EEPRO100State * s, uint16_t val)
+{
+    logout("val=0x%04x\n", val);
+    s->status = val;
+}
+#endif
+
+/*****************************************************************************
+ *
+ * Command emulation.
+ *
+ ****************************************************************************/
+
+#if 0
+static uint16_t eepro100_read_command(EEPRO100State * s)
+{
+    uint16_t val = 0xffff;
+    //~ logout("val=0x%04x\n", val);
+    return val;
+}
+#endif
+
+/* Commands that can be put in a command list entry. */
+enum commands {
+    CmdNOp = 0,
+    CmdIASetup = 1,
+    CmdConfigure = 2,
+    CmdMulticastList = 3,
+    CmdTx = 4,
+    CmdTDR = 5,                 /* load microcode */
+    CmdDump = 6,
+    CmdDiagnose = 7,
+
+    /* And some extra flags: */
+    CmdSuspend = 0x4000,        /* Suspend after completion. */
+    CmdIntr = 0x2000,           /* Interrupt after completion. */
+    CmdTxFlex = 0x0008,         /* Use "Flexible mode" for CmdTx command. */
+};
+
+static cu_state_t get_cu_state(EEPRO100State * s)
+{
+    return ((s->mem[SCBStatus] >> 6) & 0x03);
+}
+
+static void set_cu_state(EEPRO100State * s, cu_state_t state)
+{
+    s->mem[SCBStatus] = (s->mem[SCBStatus] & 0x3f) + (state << 6);
+}
+
+static ru_state_t get_ru_state(EEPRO100State * s)
+{
+    return ((s->mem[SCBStatus] >> 2) & 0x0f);
+}
+
+static void set_ru_state(EEPRO100State * s, ru_state_t state)
+{
+    s->mem[SCBStatus] = (s->mem[SCBStatus] & 0xc3) + (state << 2);
+}
+
+static void dump_statistics(EEPRO100State * s)
+{
+    /* Dump statistical data. Most data is never changed by the emulation
+     * and always 0, so we first just copy the whole block and then those
+     * values which really matter.
+     * Number of data should check configuration!!!
+     */
+    cpu_physical_memory_write(s->statsaddr, (uint8_t *) & s->statistics, 64);
+    stl_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
+    stl_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
+    stl_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
+    stl_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
+    //~ stw_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
+    //~ stw_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
+    //~ missing("CU dump statistical counters");
+}
+
+static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
+{
+    eepro100_tx_t tx;
+    uint32_t cb_address;
+    switch (val) {
+    case CU_NOP:
+        /* No operation. */
+        break;
+    case CU_START:
+        if (get_cu_state(s) != cu_idle) {
+            /* Intel documentation says that CU must be idle for the CU
+             * start command. Intel driver for Linux also starts the CU
+             * from suspended state. */
+            logout("CU state is %u, should be %u\n", get_cu_state(s), cu_idle);
+            //~ assert(!"wrong CU state");
+        }
+        set_cu_state(s, cu_active);
+        s->cu_offset = s->pointer;
+      next_command:
+        cb_address = s->cu_base + s->cu_offset;
+        cpu_physical_memory_read(cb_address, (uint8_t *) & tx, sizeof(tx));
+        uint16_t status = le16_to_cpu(tx.status);
+        uint16_t command = le16_to_cpu(tx.command);
+        logout
+            ("val=0x%02x (cu start), status=0x%04x, command=0x%04x, link=0x%08x\n",
+             val, status, command, tx.link);
+        bool bit_el = ((command & 0x8000) != 0);
+        bool bit_s = ((command & 0x4000) != 0);
+        bool bit_i = ((command & 0x2000) != 0);
+        bool bit_nc = ((command & 0x0010) != 0);
+        //~ bool bit_sf = ((command & 0x0008) != 0);
+        uint16_t cmd = command & 0x0007;
+        s->cu_offset = le32_to_cpu(tx.link);
+        switch (cmd) {
+        case CmdNOp:
+            /* Do nothing. */
+            break;
+        case CmdIASetup:
+            cpu_physical_memory_read(cb_address + 8, &s->macaddr[0], 6);
+            logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6));
+            break;
+        case CmdConfigure:
+            cpu_physical_memory_read(cb_address + 8, &s->configuration[0],
+                                     sizeof(s->configuration));
+            logout("configuration: %s\n", nic_dump(&s->configuration[0], 16));
+            break;
+        case CmdMulticastList:
+            //~ missing("multicast list");
+            break;
+        case CmdTx:
+            (void)0;
+            uint32_t tbd_array = le32_to_cpu(tx.tx_desc_addr);
+            uint16_t tcb_bytes = (le16_to_cpu(tx.tcb_bytes) & 0x3fff);
+            logout
+                ("transmit, TBD array address 0x%08x, TCB byte count 0x%04x, TBD count %u\n",
+                 tbd_array, tcb_bytes, tx.tbd_count);
+            assert(!bit_nc);
+            //~ assert(!bit_sf);
+            assert(tcb_bytes <= 2600);
+            /* Next assertion fails for local configuration. */
+            //~ assert((tcb_bytes > 0) || (tbd_array != 0xffffffff));
+            if (!((tcb_bytes > 0) || (tbd_array != 0xffffffff))) {
+                logout
+                    ("illegal values of TBD array address and TCB byte count!\n");
+            }
+            uint8_t buf[MAX_ETH_FRAME_SIZE + 4];
+            uint16_t size = 0;
+            uint32_t tbd_address = cb_address + 0x10;
+            assert(tcb_bytes <= sizeof(buf));
+            while (size < tcb_bytes) {
+                uint32_t tx_buffer_address = ldl_phys(tbd_address);
+                uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+                //~ uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+                tbd_address += 8;
+                logout
+                    ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
+                     tx_buffer_address, tx_buffer_size);
+                cpu_physical_memory_read(tx_buffer_address, &buf[size],
+                                         tx_buffer_size);
+                size += tx_buffer_size;
+            }
+            if (tbd_array == 0xffffffff) {
+                /* Simplified mode. Was already handled by code above. */
+            } else {
+                /* Flexible mode. */
+                uint8_t tbd_count = 0;
+                if (!(s->configuration[6] & BIT(4))) {
+                    /* Extended TCB. */
+                    assert(tcb_bytes == 0);
+                    for (; tbd_count < 2; tbd_count++) {
+                        uint32_t tx_buffer_address = ldl_phys(tbd_address);
+                        uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+                        uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+                        tbd_address += 8;
+                        logout
+                            ("TBD (extended mode): buffer address 0x%08x, size 0x%04x\n",
+                             tx_buffer_address, tx_buffer_size);
+                        cpu_physical_memory_read(tx_buffer_address, &buf[size],
+                                                 tx_buffer_size);
+                        size += tx_buffer_size;
+                        if (tx_buffer_el & 1) {
+                            break;
+                        }
+                    }
+                }
+                tbd_address = tbd_array;
+                for (; tbd_count < tx.tbd_count; tbd_count++) {
+                    uint32_t tx_buffer_address = ldl_phys(tbd_address);
+                    uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+                    uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+                    tbd_address += 8;
+                    logout
+                        ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
+                         tx_buffer_address, tx_buffer_size);
+                    cpu_physical_memory_read(tx_buffer_address, &buf[size],
+                                             tx_buffer_size);
+                    size += tx_buffer_size;
+                    if (tx_buffer_el & 1) {
+                        break;
+                    }
+                }
+            }
+            qemu_send_packet(s->vc, buf, size);
+            s->statistics.tx_good_frames++;
+            /* Transmit with bad status would raise an CX/TNO interrupt.
+             * (82557 only). Emulation never has bad status. */
+            //~ eepro100_cx_interrupt(s);
+            break;
+        case CmdTDR:
+            logout("load microcode\n");
+            /* Starting with offset 8, the command contains
+             * 64 dwords microcode which we just ignore here. */
+            break;
+        default:
+            missing("undefined command");
+        }
+        /* Write new status (success). */
+        stw_phys(cb_address, status | 0x8000 | 0x2000);
+        if (bit_i) {
+            /* CU completed action. */
+            eepro100_cx_interrupt(s);
+        }
+        if (bit_el) {
+            /* CU becomes idle. */
+            set_cu_state(s, cu_idle);
+            eepro100_cna_interrupt(s);
+        } else if (bit_s) {
+            /* CU becomes suspended. */
+            set_cu_state(s, cu_suspended);
+            eepro100_cna_interrupt(s);
+        } else {
+            /* More entries in list. */
+            logout("CU list with at least one more entry\n");
+            goto next_command;
+        }
+        logout("CU list empty\n");
+        /* List is empty. Now CU is idle or suspended. */
+        break;
+    case CU_RESUME:
+        if (get_cu_state(s) != cu_suspended) {
+            logout("bad CU resume from CU state %u\n", get_cu_state(s));
+            /* Workaround for bad Linux eepro100 driver which resumes
+             * from idle state. */
+            //~ missing("cu resume");
+            set_cu_state(s, cu_suspended);
+        }
+        if (get_cu_state(s) == cu_suspended) {
+            logout("CU resuming\n");
+            set_cu_state(s, cu_active);
+            goto next_command;
+        }
+        break;
+    case CU_STATSADDR:
+        /* Load dump counters address. */
+        s->statsaddr = s->pointer;
+        logout("val=0x%02x (status address)\n", val);
+        break;
+    case CU_SHOWSTATS:
+        /* Dump statistical counters. */
+        dump_statistics(s);
+        break;
+    case CU_CMD_BASE:
+        /* Load CU base. */
+        logout("val=0x%02x (CU base address)\n", val);
+        s->cu_base = s->pointer;
+        break;
+    case CU_DUMPSTATS:
+        /* Dump and reset statistical counters. */
+        dump_statistics(s);
+        memset(&s->statistics, 0, sizeof(s->statistics));
+        break;
+    case CU_SRESUME:
+        /* CU static resume. */
+        missing("CU static resume");
+        break;
+    default:
+        missing("Undefined CU command");
+    }
+}
+
+static void eepro100_ru_command(EEPRO100State * s, uint8_t val)
+{
+    switch (val) {
+    case RU_NOP:
+        /* No operation. */
+        break;
+    case RX_START:
+        /* RU start. */
+        if (get_ru_state(s) != ru_idle) {
+            logout("RU state is %u, should be %u\n", get_ru_state(s), ru_idle);
+            //~ assert(!"wrong RU state");
+        }
+        set_ru_state(s, ru_ready);
+        s->ru_offset = s->pointer;
+        logout("val=0x%02x (rx start)\n", val);
+        break;
+    case RX_RESUME:
+        /* Restart RU. */
+        if (get_ru_state(s) != ru_suspended) {
+            logout("RU state is %u, should be %u\n", get_ru_state(s),
+                   ru_suspended);
+            //~ assert(!"wrong RU state");
+        }
+        set_ru_state(s, ru_ready);
+        break;
+    case RX_ADDR_LOAD:
+        /* Load RU base. */
+        logout("val=0x%02x (RU base address)\n", val);
+        s->ru_base = s->pointer;
+        break;
+    default:
+        logout("val=0x%02x (undefined RU command)\n", val);
+        missing("Undefined SU command");
+    }
+}
+
+static void eepro100_write_command(EEPRO100State * s, uint8_t val)
+{
+    eepro100_ru_command(s, val & 0x0f);
+    eepro100_cu_command(s, val & 0xf0);
+    if ((val) == 0) {
+        logout("val=0x%02x\n", val);
+    }
+    /* Clear command byte after command was accepted. */
+    s->mem[SCBCmd] = 0;
+}
+
+/*****************************************************************************
+ *
+ * EEPROM emulation.
+ *
+ ****************************************************************************/
+
+#define EEPROM_CS       0x02
+#define EEPROM_SK       0x01
+#define EEPROM_DI       0x04
+#define EEPROM_DO       0x08
+
+static uint16_t eepro100_read_eeprom(EEPRO100State * s)
+{
+    uint16_t val;
+    memcpy(&val, &s->mem[SCBeeprom], sizeof(val));
+    if (eeprom93xx_read(s->eeprom)) {
+        val |= EEPROM_DO;
+    } else {
+        val &= ~EEPROM_DO;
+    }
+    return val;
+}
+
+static void eepro100_write_eeprom(eeprom_t * eeprom, uint8_t val)
+{
+    logout("write val=0x%02x\n", val);
+
+    /* mask unwriteable bits */
+    //~ val = SET_MASKED(val, 0x31, eeprom->value);
+
+    int eecs = ((val & EEPROM_CS) != 0);
+    int eesk = ((val & EEPROM_SK) != 0);
+    int eedi = ((val & EEPROM_DI) != 0);
+    eeprom93xx_write(eeprom, eecs, eesk, eedi);
+}
+
+static void eepro100_write_pointer(EEPRO100State * s, uint32_t val)
+{
+    s->pointer = le32_to_cpu(val);
+    logout("val=0x%08x\n", val);
+}
+
+/*****************************************************************************
+ *
+ * MDI emulation.
+ *
+ ****************************************************************************/
+
+#if defined(DEBUG_EEPRO100)
+static const char *mdi_op_name[] = {
+    "opcode 0",
+    "write",
+    "read",
+    "opcode 3"
+};
+
+static const char *mdi_reg_name[] = {
+    "Control",
+    "Status",
+    "PHY Identification (Word 1)",
+    "PHY Identification (Word 2)",
+    "Auto-Negotiation Advertisement",
+    "Auto-Negotiation Link Partner Ability",
+    "Auto-Negotiation Expansion"
+};
+#endif                          /* DEBUG_EEPRO100 */
+
+static uint32_t eepro100_read_mdi(EEPRO100State * s)
+{
+    uint32_t val;
+    memcpy(&val, &s->mem[0x10], sizeof(val));
+
+#ifdef DEBUG_EEPRO100
+    uint8_t raiseint = (val & BIT(29)) >> 29;
+    uint8_t opcode = (val & BITS(27, 26)) >> 26;
+    uint8_t phy = (val & BITS(25, 21)) >> 21;
+    uint8_t reg = (val & BITS(20, 16)) >> 16;
+    uint16_t data = (val & BITS(15, 0));
+#endif
+    /* Emulation takes no time to finish MDI transaction. */
+    val |= BIT(28);
+    TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
+                      val, raiseint, mdi_op_name[opcode], phy,
+                      mdi_reg_name[reg], data));
+    return val;
+}
+
+//~ #define BITS(val, upper, lower) (val & ???)
+static void eepro100_write_mdi(EEPRO100State * s, uint32_t val)
+{
+    uint8_t raiseint = (val & BIT(29)) >> 29;
+    uint8_t opcode = (val & BITS(27, 26)) >> 26;
+    uint8_t phy = (val & BITS(25, 21)) >> 21;
+    uint8_t reg = (val & BITS(20, 16)) >> 16;
+    uint16_t data = (val & BITS(15, 0));
+    if (phy != 1) {
+        /* Unsupported PHY address. */
+        //~ logout("phy must be 1 but is %u\n", phy);
+        data = 0;
+    } else if (opcode != 1 && opcode != 2) {
+        /* Unsupported opcode. */
+        logout("opcode must be 1 or 2 but is %u\n", opcode);
+        data = 0;
+    } else if (reg > 6) {
+        /* Unsupported register. */
+        logout("register must be 0...6 but is %u\n", reg);
+        data = 0;
+    } else {
+        TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
+                          val, raiseint, mdi_op_name[opcode], phy,
+                          mdi_reg_name[reg], data));
+        if (opcode == 1) {
+            /* MDI write */
+            switch (reg) {
+            case 0:            /* Control Register */
+                if (data & 0x8000) {
+                    /* Reset status and control registers to default. */
+                    s->mdimem[0] = eepro100_mdi_default[0];
+                    s->mdimem[1] = eepro100_mdi_default[1];
+                    data = s->mdimem[reg];
+                } else {
+                    /* Restart Auto Configuration = Normal Operation */
+                    data &= ~0x0200;
+                }
+                break;
+            case 1:            /* Status Register */
+                missing("not writable");
+                data = s->mdimem[reg];
+                break;
+            case 2:            /* PHY Identification Register (Word 1) */
+            case 3:            /* PHY Identification Register (Word 2) */
+                missing("not implemented");
+                break;
+            case 4:            /* Auto-Negotiation Advertisement Register */
+            case 5:            /* Auto-Negotiation Link Partner Ability Register */
+                break;
+            case 6:            /* Auto-Negotiation Expansion Register */
+            default:
+                missing("not implemented");
+            }
+            s->mdimem[reg] = data;
+        } else if (opcode == 2) {
+            /* MDI read */
+            switch (reg) {
+            case 0:            /* Control Register */
+                if (data & 0x8000) {
+                    /* Reset status and control registers to default. */
+                    s->mdimem[0] = eepro100_mdi_default[0];
+                    s->mdimem[1] = eepro100_mdi_default[1];
+                }
+                break;
+            case 1:            /* Status Register */
+                s->mdimem[reg] |= 0x0020;
+                break;
+            case 2:            /* PHY Identification Register (Word 1) */
+            case 3:            /* PHY Identification Register (Word 2) */
+            case 4:            /* Auto-Negotiation Advertisement Register */
+                break;
+            case 5:            /* Auto-Negotiation Link Partner Ability Register */
+                s->mdimem[reg] = 0x41fe;
+                break;
+            case 6:            /* Auto-Negotiation Expansion Register */
+                s->mdimem[reg] = 0x0001;
+                break;
+            }
+            data = s->mdimem[reg];
+        }
+        /* Emulation takes no time to finish MDI transaction.
+         * Set MDI bit in SCB status register. */
+        s->mem[SCBAck] |= 0x08;
+        val |= BIT(28);
+        if (raiseint) {
+            eepro100_mdi_interrupt(s);
+        }
+    }
+    val = (val & 0xffff0000) + data;
+    memcpy(&s->mem[0x10], &val, sizeof(val));
+}
+
+/*****************************************************************************
+ *
+ * Port emulation.
+ *
+ ****************************************************************************/
+
+#define PORT_SOFTWARE_RESET     0
+#define PORT_SELFTEST           1
+#define PORT_SELECTIVE_RESET    2
+#define PORT_DUMP               3
+#define PORT_SELECTION_MASK     3
+
+typedef struct {
+    uint32_t st_sign;           /* Self Test Signature */
+    uint32_t st_result;         /* Self Test Results */
+} eepro100_selftest_t;
+
+static uint32_t eepro100_read_port(EEPRO100State * s)
+{
+    return 0;
+}
+
+static void eepro100_write_port(EEPRO100State * s, uint32_t val)
+{
+    val = le32_to_cpu(val);
+    uint32_t address = (val & ~PORT_SELECTION_MASK);
+    uint8_t selection = (val & PORT_SELECTION_MASK);
+    switch (selection) {
+    case PORT_SOFTWARE_RESET:
+        nic_reset(s);
+        break;
+    case PORT_SELFTEST:
+        logout("selftest address=0x%08x\n", address);
+        eepro100_selftest_t data;
+        cpu_physical_memory_read(address, (uint8_t *) & data, sizeof(data));
+        data.st_sign = 0xffffffff;
+        data.st_result = 0;
+        cpu_physical_memory_write(address, (uint8_t *) & data, sizeof(data));
+        break;
+    case PORT_SELECTIVE_RESET:
+        logout("selective reset, selftest address=0x%08x\n", address);
+        nic_selective_reset(s);
+        break;
+    default:
+        logout("val=0x%08x\n", val);
+        missing("unknown port selection");
+    }
+}
+
+/*****************************************************************************
+ *
+ * General hardware emulation.
+ *
+ ****************************************************************************/
+
+static uint8_t eepro100_read1(EEPRO100State * s, uint32_t addr)
+{
+    uint8_t val;
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&val, &s->mem[addr], sizeof(val));
+    }
+
+    switch (addr) {
+    case SCBStatus:
+        //~ val = eepro100_read_status(s);
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case SCBAck:
+        //~ val = eepro100_read_status(s);
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case SCBCmd:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        //~ val = eepro100_read_command(s);
+        break;
+    case SCBIntmask:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case SCBPort + 3:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case SCBeeprom:
+        val = eepro100_read_eeprom(s);
+        break;
+    case 0x1b:                 /* PMDR (power management driver register) */
+        val = 0;
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case 0x1d:                 /* general status register */
+        /* 100 Mbps full duplex, valid link */
+        val = 0x07;
+        logout("addr=General Status val=%02x\n", val);
+        break;
+    default:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        missing("unknown byte read");
+    }
+    return val;
+}
+
+static uint16_t eepro100_read2(EEPRO100State * s, uint32_t addr)
+{
+    uint16_t val;
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&val, &s->mem[addr], sizeof(val));
+    }
+
+    logout("addr=%s val=0x%04x\n", regname(addr), val);
+
+    switch (addr) {
+    case SCBStatus:
+        //~ val = eepro100_read_status(s);
+        break;
+    case SCBeeprom:
+        val = eepro100_read_eeprom(s);
+        break;
+    default:
+        logout("addr=%s val=0x%04x\n", regname(addr), val);
+        missing("unknown word read");
+    }
+    return val;
+}
+
+static uint32_t eepro100_read4(EEPRO100State * s, uint32_t addr)
+{
+    uint32_t val;
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&val, &s->mem[addr], sizeof(val));
+    }
+
+    switch (addr) {
+    case SCBStatus:
+        //~ val = eepro100_read_status(s);
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        break;
+    case SCBPointer:
+        //~ val = eepro100_read_pointer(s);
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        break;
+    case SCBPort:
+        val = eepro100_read_port(s);
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        break;
+    case SCBCtrlMDI:
+        val = eepro100_read_mdi(s);
+        break;
+    default:
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        missing("unknown longword read");
+    }
+    return val;
+}
+
+static void eepro100_write1(EEPRO100State * s, uint32_t addr, uint8_t val)
+{
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&s->mem[addr], &val, sizeof(val));
+    }
+
+    logout("addr=%s val=0x%02x\n", regname(addr), val);
+
+    switch (addr) {
+    case SCBStatus:
+        //~ eepro100_write_status(s, val);
+        break;
+    case SCBAck:
+        eepro100_acknowledge(s);
+        break;
+    case SCBCmd:
+        eepro100_write_command(s, val);
+        break;
+    case SCBIntmask:
+        if (val & BIT(1)) {
+            eepro100_swi_interrupt(s);
+        }
+        eepro100_interrupt(s, 0);
+        break;
+    case SCBPort + 3:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        break;
+    case SCBeeprom:
+        eepro100_write_eeprom(s->eeprom, val);
+        break;
+    default:
+        logout("addr=%s val=0x%02x\n", regname(addr), val);
+        missing("unknown byte write");
+    }
+}
+
+static void eepro100_write2(EEPRO100State * s, uint32_t addr, uint16_t val)
+{
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&s->mem[addr], &val, sizeof(val));
+    }
+
+    logout("addr=%s val=0x%04x\n", regname(addr), val);
+
+    switch (addr) {
+    case SCBStatus:
+        //~ eepro100_write_status(s, val);
+        eepro100_acknowledge(s);
+        break;
+    case SCBCmd:
+        eepro100_write_command(s, val);
+        eepro100_write1(s, SCBIntmask, val >> 8);
+        break;
+    case SCBeeprom:
+        eepro100_write_eeprom(s->eeprom, val);
+        break;
+    default:
+        logout("addr=%s val=0x%04x\n", regname(addr), val);
+        missing("unknown word write");
+    }
+}
+
+static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val)
+{
+    if (addr <= sizeof(s->mem) - sizeof(val)) {
+        memcpy(&s->mem[addr], &val, sizeof(val));
+    }
+
+    switch (addr) {
+    case SCBPointer:
+        eepro100_write_pointer(s, val);
+        break;
+    case SCBPort:
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        eepro100_write_port(s, val);
+        break;
+    case SCBCtrlMDI:
+        eepro100_write_mdi(s, val);
+        break;
+    default:
+        logout("addr=%s val=0x%08x\n", regname(addr), val);
+        missing("unknown longword write");
+    }
+}
+
+static uint32_t ioport_read1(void *opaque, uint32_t addr)
+{
+    EEPRO100State *s = opaque;
+    //~ logout("addr=%s\n", regname(addr));
+    return eepro100_read1(s, addr - s->region[1]);
+}
+
+static uint32_t ioport_read2(void *opaque, uint32_t addr)
+{
+    EEPRO100State *s = opaque;
+    return eepro100_read2(s, addr - s->region[1]);
+}
+
+static uint32_t ioport_read4(void *opaque, uint32_t addr)
+{
+    EEPRO100State *s = opaque;
+    return eepro100_read4(s, addr - s->region[1]);
+}
+
+static void ioport_write1(void *opaque, uint32_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+    eepro100_write1(s, addr - s->region[1], val);
+}
+
+static void ioport_write2(void *opaque, uint32_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    eepro100_write2(s, addr - s->region[1], val);
+}
+
+static void ioport_write4(void *opaque, uint32_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    eepro100_write4(s, addr - s->region[1], val);
+}
+
+/***********************************************************/
+/* PCI EEPRO100 definitions */
+
+typedef struct PCIEEPRO100State {
+    PCIDevice dev;
+    EEPRO100State eepro100;
+} PCIEEPRO100State;
+
+static void pci_map(PCIDevice * pci_dev, int region_num,
+                    uint32_t addr, uint32_t size, int type)
+{
+    PCIEEPRO100State *d = (PCIEEPRO100State *) pci_dev;
+    EEPRO100State *s = &d->eepro100;
+
+    logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
+           region_num, addr, size, type);
+
+    assert(region_num == 1);
+    register_ioport_write(addr, size, 1, ioport_write1, s);
+    register_ioport_read(addr, size, 1, ioport_read1, s);
+    register_ioport_write(addr, size, 2, ioport_write2, s);
+    register_ioport_read(addr, size, 2, ioport_read2, s);
+    register_ioport_write(addr, size, 4, ioport_write4, s);
+    register_ioport_read(addr, size, 4, ioport_read4, s);
+
+    s->region[region_num] = addr;
+}
+
+static void pci_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+    eepro100_write1(s, addr, val);
+}
+
+static void pci_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+    eepro100_write2(s, addr, val);
+}
+
+static void pci_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+    eepro100_write4(s, addr, val);
+}
+
+static uint32_t pci_mmio_readb(void *opaque, target_phys_addr_t addr)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s\n", regname(addr));
+    return eepro100_read1(s, addr);
+}
+
+static uint32_t pci_mmio_readw(void *opaque, target_phys_addr_t addr)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s\n", regname(addr));
+    return eepro100_read2(s, addr);
+}
+
+static uint32_t pci_mmio_readl(void *opaque, target_phys_addr_t addr)
+{
+    EEPRO100State *s = opaque;
+    addr -= s->region[0];
+    //~ logout("addr=%s\n", regname(addr));
+    return eepro100_read4(s, addr);
+}
+
+static CPUWriteMemoryFunc *pci_mmio_write[] = {
+    pci_mmio_writeb,
+    pci_mmio_writew,
+    pci_mmio_writel
+};
+
+static CPUReadMemoryFunc *pci_mmio_read[] = {
+    pci_mmio_readb,
+    pci_mmio_readw,
+    pci_mmio_readl
+};
+
+static void pci_mmio_map(PCIDevice * pci_dev, int region_num,
+                         uint32_t addr, uint32_t size, int type)
+{
+    PCIEEPRO100State *d = (PCIEEPRO100State *) pci_dev;
+
+    logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
+           region_num, addr, size, type);
+
+    if (region_num == 0) {
+        /* Map control / status registers. */
+        cpu_register_physical_memory(addr, size, d->eepro100.mmio_index);
+        d->eepro100.region[region_num] = addr;
+    }
+}
+
+static int nic_can_receive(void *opaque)
+{
+    EEPRO100State *s = opaque;
+    logout("%p\n", s);
+    return get_ru_state(s) == ru_ready;
+    //~ return !eepro100_buffer_full(s);
+}
+
+#define MIN_BUF_SIZE 60
+
+static void nic_receive(void *opaque, const uint8_t * buf, int size)
+{
+    /* TODO:
+     * - Magic packets should set bit 30 in power management driver register.
+     * - Interesting packets should set bit 29 in power management driver register.
+     */
+    EEPRO100State *s = opaque;
+    uint16_t rfd_status = 0xa000;
+    static const uint8_t broadcast_macaddr[6] =
+        { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+    /* TODO: check multiple IA bit. */
+    assert(!(s->configuration[20] & BIT(6)));
+
+    if (s->configuration[8] & 0x80) {
+        /* CSMA is disabled. */
+        logout("%p received while CSMA is disabled\n", s);
+        return;
+    } else if (size < 64 && (s->configuration[7] & 1)) {
+        /* Short frame and configuration byte 7/0 (discard short receive) set:
+         * Short frame is discarded */
+        logout("%p received short frame (%d byte)\n", s, size);
+        s->statistics.rx_short_frame_errors++;
+        //~ return;
+    } else if ((size > MAX_ETH_FRAME_SIZE + 4) && !(s->configuration[18] & 8)) {
+        /* Long frame and configuration byte 18/3 (long receive ok) not set:
+         * Long frames are discarded. */
+        logout("%p received long frame (%d byte), ignored\n", s, size);
+        return;
+    } else if (memcmp(buf, s->macaddr, 6) == 0) {       // !!!
+        /* Frame matches individual address. */
+        /* TODO: check configuration byte 15/4 (ignore U/L). */
+        logout("%p received frame for me, len=%d\n", s, size);
+    } else if (memcmp(buf, broadcast_macaddr, 6) == 0) {
+        /* Broadcast frame. */
+        logout("%p received broadcast, len=%d\n", s, size);
+        rfd_status |= 0x0002;
+    } else if (buf[0] & 0x01) { // !!!
+        /* Multicast frame. */
+        logout("%p received multicast, len=%d\n", s, size);
+        /* TODO: check multicast all bit. */
+        assert(!(s->configuration[21] & BIT(3)));
+        int mcast_idx = compute_mcast_idx(buf);
+        if (!(s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7)))) {
+            return;
+        }
+        rfd_status |= 0x0002;
+    } else if (s->configuration[15] & 1) {
+        /* Promiscuous: receive all. */
+        logout("%p received frame in promiscuous mode, len=%d\n", s, size);
+        rfd_status |= 0x0004;
+    } else {
+        logout("%p received frame, ignored, len=%d,%s\n", s, size,
+               nic_dump(buf, size));
+        return;
+    }
+
+    if (get_ru_state(s) != ru_ready) {
+        /* No ressources available. */
+        logout("no ressources, state=%u\n", get_ru_state(s));
+        s->statistics.rx_resource_errors++;
+        //~ assert(!"no ressources");
+        return;
+    }
+    //~ !!!
+//~ $3 = {status = 0x0, command = 0xc000, link = 0x2d220, rx_buf_addr = 0x207dc, count = 0x0, size = 0x5f8, packet = {0x0 <repeats 1518 times>}}
+    eepro100_rx_t rx;
+    cpu_physical_memory_read(s->ru_base + s->ru_offset, (uint8_t *) & rx,
+                             offsetof(eepro100_rx_t, packet));
+    uint16_t rfd_command = le16_to_cpu(rx.command);
+    uint16_t rfd_size = le16_to_cpu(rx.size);
+    assert(size <= rfd_size);
+    if (size < 64) {
+        rfd_status |= 0x0080;
+    }
+    logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n", rfd_command,
+           rx.link, rx.rx_buf_addr, rfd_size);
+    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
+             rfd_status);
+    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
+    /* Early receive interrupt not supported. */
+    //~ eepro100_er_interrupt(s);
+    /* Receive CRC Transfer not supported. */
+    assert(!(s->configuration[18] & 4));
+    /* TODO: check stripping enable bit. */
+    //~ assert(!(s->configuration[17] & 1));
+    cpu_physical_memory_write(s->ru_base + s->ru_offset +
+                              offsetof(eepro100_rx_t, packet), buf, size);
+    s->statistics.rx_good_frames++;
+    eepro100_fr_interrupt(s);
+    s->ru_offset = le32_to_cpu(rx.link);
+    if (rfd_command & 0x8000) {
+        /* EL bit is set, so this was the last frame. */
+        assert(0);
+    }
+    if (rfd_command & 0x4000) {
+        /* S bit is set. */
+        set_ru_state(s, ru_suspended);
+    }
+}
+
+static int nic_load(QEMUFile * f, void *opaque, int version_id)
+{
+    EEPRO100State *s = (EEPRO100State *) opaque;
+    int ret;
+
+    missing("NIC load");
+
+    if (version_id > 3)
+        return -EINVAL;
+
+    if (s->pci_dev && version_id >= 3) {
+        ret = pci_device_load(s->pci_dev, f);
+        if (ret < 0)
+            return ret;
+    }
+
+    if (version_id >= 2) {
+        qemu_get_8s(f, &s->rxcr);
+    } else {
+        s->rxcr = 0x0c;
+    }
+
+    qemu_get_8s(f, &s->cmd);
+    qemu_get_be32s(f, &s->start);
+    qemu_get_be32s(f, &s->stop);
+    qemu_get_8s(f, &s->boundary);
+    qemu_get_8s(f, &s->tsr);
+    qemu_get_8s(f, &s->tpsr);
+    qemu_get_be16s(f, &s->tcnt);
+    qemu_get_be16s(f, &s->rcnt);
+    qemu_get_be32s(f, &s->rsar);
+    qemu_get_8s(f, &s->rsr);
+    qemu_get_8s(f, &s->isr);
+    qemu_get_8s(f, &s->dcfg);
+    qemu_get_8s(f, &s->imr);
+    qemu_get_buffer(f, s->phys, 6);
+    qemu_get_8s(f, &s->curpag);
+    qemu_get_buffer(f, s->mult, 8);
+    qemu_get_buffer(f, s->mem, sizeof(s->mem));
+
+    return 0;
+}
+
+static void nic_save(QEMUFile * f, void *opaque)
+{
+    EEPRO100State *s = (EEPRO100State *) opaque;
+
+    missing("NIC save");
+
+    if (s->pci_dev)
+        pci_device_save(s->pci_dev, f);
+
+    qemu_put_8s(f, &s->rxcr);
+
+    qemu_put_8s(f, &s->cmd);
+    qemu_put_be32s(f, &s->start);
+    qemu_put_be32s(f, &s->stop);
+    qemu_put_8s(f, &s->boundary);
+    qemu_put_8s(f, &s->tsr);
+    qemu_put_8s(f, &s->tpsr);
+    qemu_put_be16s(f, &s->tcnt);
+    qemu_put_be16s(f, &s->rcnt);
+    qemu_put_be32s(f, &s->rsar);
+    qemu_put_8s(f, &s->rsr);
+    qemu_put_8s(f, &s->isr);
+    qemu_put_8s(f, &s->dcfg);
+    qemu_put_8s(f, &s->imr);
+    qemu_put_buffer(f, s->phys, 6);
+    qemu_put_8s(f, &s->curpag);
+    qemu_put_buffer(f, s->mult, 8);
+    qemu_put_buffer(f, s->mem, sizeof(s->mem));
+}
+
+static void nic_init(PCIBus * bus, NICInfo * nd,
+                     const char *name, uint32_t device)
+{
+    PCIEEPRO100State *d;
+    EEPRO100State *s;
+
+    logout("\n");
+
+    d = (PCIEEPRO100State *) pci_register_device(bus, name,
+                                                 sizeof(PCIEEPRO100State), -1,
+                                                 NULL, NULL);
+
+    s = &d->eepro100;
+    s->device = device;
+    s->pci_dev = &d->dev;
+
+    pci_reset(s);
+
+    /* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM,
+     * i82559 and later support 64 or 256 word EEPROM. */
+    s->eeprom = eeprom93xx_new(EEPROM_SIZE);
+
+    /* Handler for memory-mapped I/O */
+    d->eepro100.mmio_index =
+        cpu_register_io_memory(0, pci_mmio_read, pci_mmio_write, s);
+
+    pci_register_io_region(&d->dev, 0, PCI_MEM_SIZE,
+                           PCI_ADDRESS_SPACE_MEM |
+                           PCI_ADDRESS_SPACE_MEM_PREFETCH, pci_mmio_map);
+    pci_register_io_region(&d->dev, 1, PCI_IO_SIZE, PCI_ADDRESS_SPACE_IO,
+                           pci_map);
+    pci_register_io_region(&d->dev, 2, PCI_FLASH_SIZE, PCI_ADDRESS_SPACE_MEM,
+                           pci_mmio_map);
+
+    memcpy(s->macaddr, nd->macaddr, 6);
+    logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6));
+    assert(s->region[1] == 0);
+
+    nic_reset(s);
+
+    s->vc = qemu_new_vlan_client(nd->vlan, nic_receive, nic_can_receive, s);
+
+    snprintf(s->vc->info_str, sizeof(s->vc->info_str),
+             "eepro100 pci macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
+             s->macaddr[0],
+             s->macaddr[1],
+             s->macaddr[2], s->macaddr[3], s->macaddr[4], s->macaddr[5]);
+
+    qemu_register_reset(nic_reset, s);
+
+    /* XXX: instance number ? */
+    register_savevm(name, 0, 3, nic_save, nic_load, s);
+}
+
+void pci_i82551_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+    nic_init(bus, nd, "i82551", i82551);
+    //~ uint8_t *pci_conf = d->dev.config;
+}
+
+void pci_i82557b_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+    nic_init(bus, nd, "i82557b", i82557B);
+}
+
+void pci_i82559er_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+    nic_init(bus, nd, "i82559er", i82559ER);
+}
+
+/* eof */
diff --git a/hw/eeprom93xx.c b/hw/eeprom93xx.c
new file mode 100644
index 0000000..14f0189
--- /dev/null
+++ b/hw/eeprom93xx.c
@@ -0,0 +1,312 @@
+/*
+ * QEMU EEPROM 93xx emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/* Emulation for serial EEPROMs:
+ * NMC93C06 256-Bit (16 x 16)
+ * NMC93C46 1024-Bit (64 x 16)
+ * NMC93C56 2028 Bit (128 x 16)
+ * NMC93C66 4096 Bit (256 x 16)
+ * Compatible devices include FM93C46 and others.
+ *
+ * Other drivers use these interface functions:
+ * eeprom93xx_new   - add a new EEPROM (with 16, 64 or 256 words)
+ * eeprom93xx_free  - destroy EEPROM
+ * eeprom93xx_read  - read data from the EEPROM
+ * eeprom93xx_write - write data to the EEPROM
+ * eeprom93xx_data  - get EEPROM data array for external manipulation
+ *
+ * Todo list:
+ * - No emulation of EEPROM timings.
+ */
+
+#include <assert.h>
+#include "eeprom93xx.h"
+
+/* Debug EEPROM emulation. */
+//~ #define DEBUG_EEPROM
+
+#ifdef DEBUG_EEPROM
+#define logout(fmt, args...) fprintf(stderr, "EEPROM\t%-24s" fmt, __func__, ##args)
+#else
+#define logout(fmt, args...) ((void)0)
+#endif
+
+static int eeprom_instance = 0;
+static const int eeprom_version = 20061112;
+
+#if 0
+typedef enum {
+  eeprom_read  = 0x80,   /* read register xx */
+  eeprom_write = 0x40,   /* write register xx */
+  eeprom_erase = 0xc0,   /* erase register xx */
+  eeprom_ewen  = 0x30,   /* erase / write enable */
+  eeprom_ewds  = 0x00,   /* erase / write disable */
+  eeprom_eral  = 0x20,   /* erase all registers */
+  eeprom_wral  = 0x10,   /* write all registers */
+  eeprom_amask = 0x0f,
+  eeprom_imask = 0xf0
+} eeprom_instruction_t;
+#endif
+
+#ifdef DEBUG_EEPROM
+static const char *opstring[] = {
+  "extended", "write", "read", "erase"
+};
+#endif
+
+struct _eeprom_t {
+    uint8_t  tick;
+    uint8_t  address;
+    uint8_t  command;
+    uint8_t  writeable;
+
+    uint8_t eecs;
+    uint8_t eesk;
+    uint8_t eedo;
+
+    uint8_t  addrbits;
+    uint8_t  size;
+    uint16_t data;
+    uint16_t contents[0];
+};
+
+/* Code for saving and restoring of EEPROM state. */
+
+static void eeprom_save(QEMUFile *f, void *opaque)
+{
+    /* Save EEPROM data. */
+    unsigned address;
+    eeprom_t *eeprom = (eeprom_t *)opaque;
+    qemu_put_buffer(f, (uint8_t *)eeprom, sizeof(*eeprom) - 2);
+    qemu_put_be16(f, eeprom->data);
+    for (address = 0; address < eeprom->size; address++) {
+        qemu_put_be16(f, eeprom->contents[address]);
+    }
+}
+
+static int eeprom_load(QEMUFile *f, void *opaque, int version_id)
+{
+    /* Load EEPROM data from saved data if version and EEPROM size
+       of data and current EEPROM are identical. */
+    eeprom_t *eeprom = (eeprom_t *)opaque;
+    int result = -EINVAL;
+    if (version_id == eeprom_version) {
+        unsigned address;
+        uint8_t size = eeprom->size;
+        qemu_get_buffer(f, (uint8_t *)eeprom, sizeof(*eeprom) - 2);
+        if (eeprom->size == size) {
+            eeprom->data = qemu_get_be16(f);
+            for (address = 0; address < eeprom->size; address++) {
+                eeprom->contents[address] = qemu_get_be16(f);
+            }
+            result = 0;
+        }
+    }
+    return result;
+}
+
+void eeprom93xx_write(eeprom_t *eeprom, int eecs, int eesk, int eedi)
+{
+    uint8_t tick = eeprom->tick;
+    uint8_t eedo = eeprom->eedo;
+    uint16_t address = eeprom->address;
+    uint8_t command = eeprom->command;
+
+    logout("CS=%u SK=%u DI=%u DO=%u, tick = %u\n",
+           eecs, eesk, eedi, eedo, tick);
+
+    if (! eeprom->eecs && eecs) {
+        /* Start chip select cycle. */
+        logout("Cycle start, waiting for 1st start bit (0)\n");
+        tick = 0;
+        command = 0x0;
+        address = 0x0;
+    } else if (eeprom->eecs && ! eecs) {
+        /* End chip select cycle. This triggers write / erase. */
+        if (eeprom->writeable) {
+            uint8_t subcommand = address >> (eeprom->addrbits - 2);
+            if (command == 0 && subcommand == 2) {
+                /* Erase all. */
+                for (address = 0; address < eeprom->size; address++) {
+                    eeprom->contents[address] = 0xffff;
+                }
+            } else if (command == 3) {
+                /* Erase word. */
+                eeprom->contents[address] = 0xffff;
+            } else if (tick >= 2 + 2 + eeprom->addrbits + 16) {
+                if (command == 1) {
+                    /* Write word. */
+                    eeprom->contents[address] &= eeprom->data;
+                } else if (command == 0 && subcommand == 1) {
+                    /* Write all. */
+                    for (address = 0; address < eeprom->size; address++) {
+                        eeprom->contents[address] &= eeprom->data;
+                    }
+                }
+            }
+        }
+        /* Output DO is tristate, read results in 1. */
+        eedo = 1;
+    } else if (eecs && ! eeprom->eesk && eesk) {
+        /* Raising edge of clock shifts data in. */
+        if (tick == 0) {
+            /* Wait for 1st start bit. */
+            if (eedi == 0) {
+                logout("Got correct 1st start bit, waiting for 2nd start bit (1)\n");
+                tick++;
+            } else {
+                logout("wrong 1st start bit (is 1, should be 0)\n");
+                tick = 2;
+                //~ assert(!"wrong start bit");
+            }
+        } else if (tick == 1) {
+            /* Wait for 2nd start bit. */
+            if (eedi != 0) {
+                logout("Got correct 2nd start bit, getting command + address\n");
+                tick++;
+            } else {
+                logout("1st start bit is longer than needed\n");
+            }
+        } else if (tick < 2 + 2) {
+            /* Got 2 start bits, transfer 2 opcode bits. */
+            tick++;
+            command <<= 1;
+            if (eedi) {
+                command += 1;
+            }
+        } else if (tick < 2 + 2 + eeprom->addrbits) {
+            /* Got 2 start bits and 2 opcode bits, transfer all address bits. */
+            tick++;
+            address = ((address << 1) | eedi);
+            if (tick == 2 + 2 + eeprom->addrbits) {
+                logout("%s command, address = 0x%02x (value 0x%04x)\n",
+                       opstring[command], address, eeprom->contents[address]);
+                if (command == 2) {
+                    eedo = 0;
+                }
+                address = address % eeprom->size;
+                if (command == 0) {
+                    /* Command code in upper 2 bits of address. */
+                    switch (address >> (eeprom->addrbits - 2)) {
+                        case 0:
+                            logout("write disable command\n");
+                            eeprom->writeable = 0;
+                            break;
+                        case 1:
+                            logout("write all command\n");
+                            break;
+                        case 2:
+                            logout("erase all command\n");
+                            break;
+                        case 3:
+                            logout("write enable command\n");
+                            eeprom->writeable = 1;
+                            break;
+                    }
+                } else {
+                    /* Read, write or erase word. */
+                    eeprom->data = eeprom->contents[address];
+                }
+            }
+        } else if (tick < 2 + 2 + eeprom->addrbits + 16) {
+            /* Transfer 16 data bits. */
+            tick++;
+            if (command == 2) {
+                /* Read word. */
+                eedo = ((eeprom->data & 0x8000) != 0);
+            }
+            eeprom->data <<= 1;
+            eeprom->data += eedi;
+        } else {
+            logout("additional unneeded tick, not processed\n");
+        }
+    }
+    /* Save status of EEPROM. */
+    eeprom->tick = tick;
+    eeprom->eecs = eecs;
+    eeprom->eesk = eesk;
+    eeprom->eedo = eedo;
+    eeprom->address = address;
+    eeprom->command = command;
+}
+
+uint16_t eeprom93xx_read(eeprom_t *eeprom)
+{
+    /* Return status of pin DO (0 or 1). */
+    logout("CS=%u DO=%u\n", eeprom->eecs, eeprom->eedo);
+    return (eeprom->eedo);
+}
+
+#if 0
+void eeprom93xx_reset(eeprom_t *eeprom)
+{
+    /* prepare eeprom */
+    logout("eeprom = 0x%p\n", eeprom);
+    eeprom->tick = 0;
+    eeprom->command = 0;
+}
+#endif
+
+eeprom_t *eeprom93xx_new(uint16_t nwords)
+{
+    /* Add a new EEPROM (with 16, 64 or 256 words). */
+    eeprom_t *eeprom;
+    uint8_t addrbits;
+
+    switch (nwords) {
+        case 16:
+        case 64:
+            addrbits = 6;
+            break;
+        case 128:
+        case 256:
+            addrbits = 8;
+            break;
+        default:
+            assert(!"Unsupported EEPROM size, fallback to 64 words!");
+            nwords = 64;
+            addrbits = 6;
+    }
+
+    eeprom = (eeprom_t *)qemu_mallocz(sizeof(*eeprom) + nwords * 2);
+    eeprom->size = nwords;
+    eeprom->addrbits = addrbits;
+    /* Output DO is tristate, read results in 1. */
+    eeprom->eedo = 1;
+    logout("eeprom = 0x%p, nwords = %u\n", eeprom, nwords);
+    register_savevm("eeprom", eeprom_instance, eeprom_version,
+                    eeprom_save, eeprom_load, eeprom);
+    return eeprom;
+}
+
+void eeprom93xx_free(eeprom_t *eeprom)
+{
+    /* Destroy EEPROM. */
+    logout("eeprom = 0x%p\n", eeprom);
+    qemu_free(eeprom);
+}
+
+uint16_t *eeprom93xx_data(eeprom_t *eeprom)
+{
+    /* Get EEPROM data array. */
+    return &eeprom->contents[0];
+}
+
+/* eof */
diff --git a/hw/eeprom93xx.h b/hw/eeprom93xx.h
new file mode 100644
index 0000000..fde4912
--- /dev/null
+++ b/hw/eeprom93xx.h
@@ -0,0 +1,43 @@
+/*
+ * QEMU EEPROM 93xx emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef EEPROM93XX_H
+#define EEPROM93XX_H
+
+#include "vl.h"
+
+typedef struct _eeprom_t eeprom_t;
+
+/* Create a new EEPROM with (nwords * 2) bytes. */
+eeprom_t *eeprom93xx_new(uint16_t nwords);
+
+/* Destroy an existing EEPROM. */
+void eeprom93xx_free(eeprom_t *eeprom);
+
+/* Read from the EEPROM. */
+uint16_t eeprom93xx_read(eeprom_t *eeprom);
+
+/* Write to the EEPROM. */
+void eeprom93xx_write(eeprom_t *eeprom, int eecs, int eesk, int eedi);
+
+/* Get EEPROM data array. */
+uint16_t *eeprom93xx_data(eeprom_t *eeprom);
+
+#endif /* EEPROM93XX_H */
diff --git a/hw/pci.c b/hw/pci.c
index eeaef9e..4d9eb03 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -548,6 +548,12 @@ void pci_nic_init(PCIBus *bus, NICInfo *nd, int devfn)
 {
     if (strcmp(nd->model, "ne2k_pci") == 0) {
         pci_ne2000_init(bus, nd, devfn);
+    } else if (strcmp(nd->model, "i82551") == 0) {
+        pci_i82551_init(bus, nd, devfn);
+    } else if (strcmp(nd->model, "i82557b") == 0) {
+        pci_i82557b_init(bus, nd, devfn);
+    } else if (strcmp(nd->model, "i82559er") == 0) {
+        pci_i82559er_init(bus, nd, devfn);
     } else if (strcmp(nd->model, "rtl8139") == 0) {
         pci_rtl8139_init(bus, nd, devfn);
     } else if (strcmp(nd->model, "pcnet") == 0) {
diff --git a/vl.h b/vl.h
index d27b711..d44d6aa 100644
--- a/vl.h
+++ b/vl.h
@@ -1009,6 +1009,12 @@ fdctrl_t *fdctrl_init (int irq_lvl, int dma_chann, int mem_mapped,
                        BlockDriverState **fds);
 int fdctrl_get_drive_type(fdctrl_t *fdctrl, int drive_num);
 
+/* eepro100.c */
+
+void pci_i82551_init(PCIBus *bus, NICInfo *nd, int devfn);
+void pci_i82557b_init(PCIBus *bus, NICInfo *nd, int devfn);
+void pci_i82559er_init(PCIBus *bus, NICInfo *nd, int devfn);
+
 /* ne2000.c */
 
 void isa_ne2000_init(int base, int irq, NICInfo *nd);