diff options
author | Bin Meng <bin.meng@windriver.com> | 2021-01-06 14:35:01 +0800 |
---|---|---|
committer | Peter Maydell <peter.maydell@linaro.org> | 2021-01-08 15:13:39 +0000 |
commit | 56a11a9b7580b576a9db930667be07f1dd1564d5 (patch) | |
tree | 761d531d4766940f12f612af0c96c47078f7f6e5 | |
parent | d97d9152c7baa9f3743aea7ffe124c7977a9b0fa (diff) | |
download | qemu-56a11a9b7580b576a9db930667be07f1dd1564d5.zip qemu-56a11a9b7580b576a9db930667be07f1dd1564d5.tar.gz qemu-56a11a9b7580b576a9db930667be07f1dd1564d5.tar.bz2 |
hw/misc: imx6_ccm: Update PMU_MISC0 reset value
U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap()
in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the
bandgap has stabilized.
With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6
sabrelite board (mx6qsabrelite_defconfig), with a slight change made
by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot
shell on QEMU with the following command:
$ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \
-display none -serial null -serial stdio
Boot log below:
U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800)
CPU: Freescale i.MX?? rev1.0 at 792 MHz
Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Lite Board
Board: SABRE Lite
I2C: ready
DRAM: 1 GiB
force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55
force_idle_bus: failed to clear bus, sda=0 scl=0
force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c
force_idle_bus: failed to clear bus, sda=0 scl=0
force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5
force_idle_bus: failed to clear bus, sda=0 scl=0
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - No block device, using default environment
In: serial
Out: serial
Err: serial
Net: Board Net Initialization Failed
No ethernet found.
starting USB...
Bus usb@2184000: usb dr_mode not found
USB EHCI 1.00
Bus usb@2184200: USB EHCI 1.00
scanning bus usb@2184000 for devices... 1 USB Device(s) found
scanning bus usb@2184200 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Hit any key to stop autoboot: 0
=>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-rw-r--r-- | hw/misc/imx6_ccm.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index cb74042..7e031b6 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -450,7 +450,7 @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; |