diff options
author | bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162> | 2003-06-24 13:42:40 +0000 |
---|---|---|
committer | bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162> | 2003-06-24 13:42:40 +0000 |
commit | 0824d6fc674084519c856c433887221be099c549 (patch) | |
tree | 0f6b30912a6fc69a37ea757bfa5a8d9bc259b95c | |
parent | 6c0372d30be01e2a4664def829ed9682c2846d29 (diff) | |
download | qemu-0824d6fc674084519c856c433887221be099c549.zip qemu-0824d6fc674084519c856c433887221be099c549.tar.gz qemu-0824d6fc674084519c856c433887221be099c549.tar.bz2 |
for hard core developpers only: a new user mode linux project :-)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@267 c046a42c-6fe2-441c-8c8c-71466251a162
-rw-r--r-- | Makefile | 4 | ||||
-rw-r--r-- | vl.c | 1383 |
2 files changed, 1387 insertions, 0 deletions
@@ -135,6 +135,10 @@ ifeq ($(ARCH),alpha) echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc endif +# must use static linking to avoid leaving stuff in virtual address space +vl: vl.o libqemu.a + $(CC) -static -Wl,-T,i386-vl.ld -o $@ $^ $(LIBS) + depend: $(SRCS) $(CC) -MM $(CFLAGS) $^ 1>.depend @@ -0,0 +1,1383 @@ +/* + * QEMU based User Mode Linux + * + * This file is part of proprietary software - it is published here + * only for demonstration and information purposes. + * + * Copyright (c) 2003 Fabrice Bellard + */ +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <getopt.h> +#include <inttypes.h> +#include <unistd.h> +#include <sys/mman.h> +#include <fcntl.h> +#include <signal.h> +#include <time.h> +#include <sys/time.h> +#include <malloc.h> +#include <termios.h> +#include <sys/poll.h> +#include <errno.h> + +#include "cpu-i386.h" +#include "disas.h" + +#define DEBUG_LOGFILE "/tmp/vl.log" +//#define DEBUG_UNUSED_IOPORT + +#define PHYS_RAM_BASE 0xa8000000 +#define KERNEL_LOAD_ADDR 0x00100000 +#define INITRD_LOAD_ADDR 0x00400000 +#define KERNEL_PARAMS_ADDR 0x00090000 + +/* from plex86 (BSD license) */ +struct __attribute__ ((packed)) linux_params { + // For 0x00..0x3f, see 'struct screen_info' in linux/include/linux/tty.h. + // I just padded out the VESA parts, rather than define them. + + /* 0x000 */ uint8_t orig_x; + /* 0x001 */ uint8_t orig_y; + /* 0x002 */ uint16_t ext_mem_k; + /* 0x004 */ uint16_t orig_video_page; + /* 0x006 */ uint8_t orig_video_mode; + /* 0x007 */ uint8_t orig_video_cols; + /* 0x008 */ uint16_t unused1; + /* 0x00a */ uint16_t orig_video_ega_bx; + /* 0x00c */ uint16_t unused2; + /* 0x00e */ uint8_t orig_video_lines; + /* 0x00f */ uint8_t orig_video_isVGA; + /* 0x010 */ uint16_t orig_video_points; + /* 0x012 */ uint8_t pad0[0x20 - 0x12]; // VESA info. + /* 0x020 */ uint16_t cl_magic; // Commandline magic number (0xA33F) + /* 0x022 */ uint16_t cl_offset; // Commandline offset. Address of commandline + // is calculated as 0x90000 + cl_offset, bu + // only if cl_magic == 0xA33F. + /* 0x024 */ uint8_t pad1[0x40 - 0x24]; // VESA info. + + /* 0x040 */ uint8_t apm_bios_info[20]; // struct apm_bios_info + /* 0x054 */ uint8_t pad2[0x80 - 0x54]; + + // Following 2 from 'struct drive_info_struct' in drivers/block/cciss.h. + // Might be truncated? + /* 0x080 */ uint8_t hd0_info[16]; // hd0-disk-parameter from intvector 0x41 + /* 0x090 */ uint8_t hd1_info[16]; // hd1-disk-parameter from intvector 0x46 + + // System description table truncated to 16 bytes + // From 'struct sys_desc_table_struct' in linux/arch/i386/kernel/setup.c. + /* 0x0a0 */ uint16_t sys_description_len; + /* 0x0a2 */ uint8_t sys_description_table[14]; + // [0] machine id + // [1] machine submodel id + // [2] BIOS revision + // [3] bit1: MCA bus + + /* 0x0b0 */ uint8_t pad3[0x1e0 - 0xb0]; + /* 0x1e0 */ uint32_t alt_mem_k; + /* 0x1e4 */ uint8_t pad4[4]; + /* 0x1e8 */ uint8_t e820map_entries; + /* 0x1e9 */ uint8_t eddbuf_entries; // EDD_NR + /* 0x1ea */ uint8_t pad5[0x1f1 - 0x1ea]; + /* 0x1f1 */ uint8_t setup_sects; // size of setup.S, number of sectors + /* 0x1f2 */ uint16_t mount_root_rdonly; // MOUNT_ROOT_RDONLY (if !=0) + /* 0x1f4 */ uint16_t sys_size; // size of compressed kernel-part in the + // (b)zImage-file (in 16 byte units, rounded up) + /* 0x1f6 */ uint16_t swap_dev; // (unused AFAIK) + /* 0x1f8 */ uint16_t ramdisk_flags; + /* 0x1fa */ uint16_t vga_mode; // (old one) + /* 0x1fc */ uint16_t orig_root_dev; // (high=Major, low=minor) + /* 0x1fe */ uint8_t pad6[1]; + /* 0x1ff */ uint8_t aux_device_info; + /* 0x200 */ uint16_t jump_setup; // Jump to start of setup code, + // aka "reserved" field. + /* 0x202 */ uint8_t setup_signature[4]; // Signature for SETUP-header, ="HdrS" + /* 0x206 */ uint16_t header_format_version; // Version number of header format; + /* 0x208 */ uint8_t setup_S_temp0[8]; // Used by setup.S for communication with + // boot loaders, look there. + /* 0x210 */ uint8_t loader_type; + // 0 for old one. + // else 0xTV: + // T=0: LILO + // T=1: Loadlin + // T=2: bootsect-loader + // T=3: SYSLINUX + // T=4: ETHERBOOT + // V=version + /* 0x211 */ uint8_t loadflags; + // bit0 = 1: kernel is loaded high (bzImage) + // bit7 = 1: Heap and pointer (see below) set by boot + // loader. + /* 0x212 */ uint16_t setup_S_temp1; + /* 0x214 */ uint32_t kernel_start; + /* 0x218 */ uint32_t initrd_start; + /* 0x21c */ uint32_t initrd_size; + /* 0x220 */ uint8_t setup_S_temp2[4]; + /* 0x224 */ uint16_t setup_S_heap_end_pointer; + /* 0x226 */ uint8_t pad7[0x2d0 - 0x226]; + + /* 0x2d0 : Int 15, ax=e820 memory map. */ + // (linux/include/asm-i386/e820.h, 'struct e820entry') +#define E820MAX 32 +#define E820_RAM 1 +#define E820_RESERVED 2 +#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ +#define E820_NVS 4 + struct { + uint64_t addr; + uint64_t size; + uint32_t type; + } e820map[E820MAX]; + + /* 0x550 */ uint8_t pad8[0x600 - 0x550]; + + // BIOS Enhanced Disk Drive Services. + // (From linux/include/asm-i386/edd.h, 'struct edd_info') + // Each 'struct edd_info is 78 bytes, times a max of 6 structs in array. + /* 0x600 */ uint8_t eddbuf[0x7d4 - 0x600]; + + /* 0x7d4 */ uint8_t pad9[0x800 - 0x7d4]; + /* 0x800 */ uint8_t commandline[0x800]; + + /* 0x1000 */ + uint64_t gdt_table[256]; + uint64_t idt_table[48]; +}; + +#define KERNEL_CS 0x10 +#define KERNEL_DS 0x18 + +typedef void (IOPortWriteFunc)(CPUX86State *env, uint32_t address, uint32_t data); +typedef uint32_t (IOPortReadFunc)(CPUX86State *env, uint32_t address); + +#define MAX_IOPORTS 1024 + +char phys_ram_file[1024]; +CPUX86State *global_env; +FILE *logfile = NULL; +int loglevel; +IOPortReadFunc *ioport_readb_table[MAX_IOPORTS]; +IOPortWriteFunc *ioport_writeb_table[MAX_IOPORTS]; +IOPortReadFunc *ioport_readw_table[MAX_IOPORTS]; +IOPortWriteFunc *ioport_writew_table[MAX_IOPORTS]; + +/***********************************************************/ +/* x86 io ports */ + +uint32_t default_ioport_readb(CPUX86State *env, uint32_t address) +{ +#ifdef DEBUG_UNUSED_IOPORT + fprintf(stderr, "inb: port=0x%04x\n", address); +#endif + return 0; +} + +void default_ioport_writeb(CPUX86State *env, uint32_t address, uint32_t data) +{ +#ifdef DEBUG_UNUSED_IOPORT + fprintf(stderr, "outb: port=0x%04x data=0x%02x\n", address, data); +#endif +} + +/* default is to make two byte accesses */ +uint32_t default_ioport_readw(CPUX86State *env, uint32_t address) +{ + uint32_t data; + data = ioport_readb_table[address](env, address); + data |= ioport_readb_table[address + 1](env, address + 1) << 8; + return data; +} + +void default_ioport_writew(CPUX86State *env, uint32_t address, uint32_t data) +{ + ioport_writeb_table[address](env, address, data & 0xff); + ioport_writeb_table[address + 1](env, address + 1, (data >> 8) & 0xff); +} + +void init_ioports(void) +{ + int i; + + for(i = 0; i < MAX_IOPORTS; i++) { + ioport_readb_table[i] = default_ioport_readb; + ioport_writeb_table[i] = default_ioport_writeb; + ioport_readw_table[i] = default_ioport_readw; + ioport_writew_table[i] = default_ioport_writew; + } +} + +int register_ioport_readb(int start, int length, IOPortReadFunc *func) +{ + int i; + + for(i = start; i < start + length; i++) + ioport_readb_table[i] = func; + return 0; +} + +int register_ioport_writeb(int start, int length, IOPortWriteFunc *func) +{ + int i; + + for(i = start; i < start + length; i++) + ioport_writeb_table[i] = func; + return 0; +} + +void pstrcpy(char *buf, int buf_size, const char *str) +{ + int c; + char *q = buf; + + if (buf_size <= 0) + return; + + for(;;) { + c = *str++; + if (c == 0 || q >= buf + buf_size - 1) + break; + *q++ = c; + } + *q = '\0'; +} + +/* strcat and truncate. */ +char *pstrcat(char *buf, int buf_size, const char *s) +{ + int len; + len = strlen(buf); + if (len < buf_size) + pstrcpy(buf + len, buf_size - len, s); + return buf; +} + +int load_kernel(const char *filename, uint8_t *addr) +{ + int fd, size, setup_sects; + uint8_t bootsect[512]; + + fd = open(filename, O_RDONLY); + if (fd < 0) + return -1; + if (read(fd, bootsect, 512) != 512) + goto fail; + setup_sects = bootsect[0x1F1]; + if (!setup_sects) + setup_sects = 4; + /* skip 16 bit setup code */ + lseek(fd, (setup_sects + 1) * 512, SEEK_SET); + size = read(fd, addr, 16 * 1024 * 1024); + if (size < 0) + goto fail; + close(fd); + return size; + fail: + close(fd); + return -1; +} + +/* return the size or -1 if error */ +int load_image(const char *filename, uint8_t *addr) +{ + int fd, size; + fd = open(filename, O_RDONLY); + if (fd < 0) + return -1; + size = lseek(fd, 0, SEEK_END); + lseek(fd, 0, SEEK_SET); + if (read(fd, addr, size) != size) { + close(fd); + return -1; + } + close(fd); + return size; +} + +void cpu_x86_outb(CPUX86State *env, int addr, int val) +{ + ioport_writeb_table[addr & (MAX_IOPORTS - 1)](env, addr, val); +} + +void cpu_x86_outw(CPUX86State *env, int addr, int val) +{ + ioport_writew_table[addr & (MAX_IOPORTS - 1)](env, addr, val); +} + +void cpu_x86_outl(CPUX86State *env, int addr, int val) +{ + fprintf(stderr, "outl: port=0x%04x, data=%08x\n", addr, val); +} + +int cpu_x86_inb(CPUX86State *env, int addr) +{ + return ioport_readb_table[addr & (MAX_IOPORTS - 1)](env, addr); +} + +int cpu_x86_inw(CPUX86State *env, int addr) +{ + return ioport_readw_table[addr & (MAX_IOPORTS - 1)](env, addr); +} + +int cpu_x86_inl(CPUX86State *env, int addr) +{ + fprintf(stderr, "inl: port=0x%04x\n", addr); + return 0; +} + +/***********************************************************/ +void ioport80_write(CPUX86State *env, uint32_t addr, uint32_t data) +{ +} + +void hw_error(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + fprintf(stderr, "qemu: hardware error: "); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); +#ifdef TARGET_I386 + cpu_x86_dump_state(global_env, stderr, X86_DUMP_FPU | X86_DUMP_CCOP); +#endif + va_end(ap); + abort(); +} + +/***********************************************************/ +/* vga emulation */ +static uint8_t vga_index; +static uint8_t vga_regs[256]; +static int last_cursor_pos; + +void update_console_messages(void) +{ + int c, i, cursor_pos, eol; + + cursor_pos = vga_regs[0x0f] | (vga_regs[0x0e] << 8); + eol = 0; + for(i = last_cursor_pos; i < cursor_pos; i++) { + c = phys_ram_base[0xb8000 + (i) * 2]; + if (c >= ' ') { + putchar(c); + eol = 0; + } else { + if (!eol) + putchar('\n'); + eol = 1; + } + } + fflush(stdout); + last_cursor_pos = cursor_pos; +} + +/* just to see first Linux console messages, we intercept cursor position */ +void vga_ioport_write(CPUX86State *env, uint32_t addr, uint32_t data) +{ + switch(addr) { + case 0x3d4: + vga_index = data; + break; + case 0x3d5: + vga_regs[vga_index] = data; + if (vga_index == 0x0f) + update_console_messages(); + break; + } + +} + +/***********************************************************/ +/* cmos emulation */ + +#define RTC_SECONDS 0 +#define RTC_SECONDS_ALARM 1 +#define RTC_MINUTES 2 +#define RTC_MINUTES_ALARM 3 +#define RTC_HOURS 4 +#define RTC_HOURS_ALARM 5 +#define RTC_ALARM_DONT_CARE 0xC0 + +#define RTC_DAY_OF_WEEK 6 +#define RTC_DAY_OF_MONTH 7 +#define RTC_MONTH 8 +#define RTC_YEAR 9 + +#define RTC_REG_A 10 +#define RTC_REG_B 11 +#define RTC_REG_C 12 +#define RTC_REG_D 13 + +/* PC cmos mappings */ +#define REG_EQUIPMENT_BYTE 0x14 + +uint8_t cmos_data[128]; +uint8_t cmos_index; + +void cmos_ioport_write(CPUX86State *env, uint32_t addr, uint32_t data) +{ + if (addr == 0x70) { + cmos_index = data & 0x7f; + } +} + +uint32_t cmos_ioport_read(CPUX86State *env, uint32_t addr) +{ + int ret; + + if (addr == 0x70) { + return 0xff; + } else { + /* toggle update-in-progress bit for Linux (same hack as + plex86) */ + ret = cmos_data[cmos_index]; + if (cmos_index == RTC_REG_A) + cmos_data[RTC_REG_A] ^= 0x80; + else if (cmos_index == RTC_REG_C) + cmos_data[RTC_REG_C] = 0x00; + return ret; + } +} + + +static inline int to_bcd(int a) +{ + return ((a / 10) << 4) | (a % 10); +} + +void cmos_init(void) +{ + struct tm *tm; + time_t ti; + + ti = time(NULL); + tm = gmtime(&ti); + cmos_data[RTC_SECONDS] = to_bcd(tm->tm_sec); + cmos_data[RTC_MINUTES] = to_bcd(tm->tm_min); + cmos_data[RTC_HOURS] = to_bcd(tm->tm_hour); + cmos_data[RTC_DAY_OF_WEEK] = to_bcd(tm->tm_wday); + cmos_data[RTC_DAY_OF_MONTH] = to_bcd(tm->tm_mday); + cmos_data[RTC_MONTH] = to_bcd(tm->tm_mon); + cmos_data[RTC_YEAR] = to_bcd(tm->tm_year % 100); + + cmos_data[RTC_REG_A] = 0x26; + cmos_data[RTC_REG_B] = 0x02; + cmos_data[RTC_REG_C] = 0x00; + cmos_data[RTC_REG_D] = 0x80; + + cmos_data[REG_EQUIPMENT_BYTE] = 0x02; /* FPU is there */ + + register_ioport_writeb(0x70, 2, cmos_ioport_write); + register_ioport_readb(0x70, 2, cmos_ioport_read); +} + +/***********************************************************/ +/* 8259 pic emulation */ + +typedef struct PicState { + uint8_t last_irr; /* edge detection */ + uint8_t irr; /* interrupt request register */ + uint8_t imr; /* interrupt mask register */ + uint8_t isr; /* interrupt service register */ + uint8_t priority_add; /* used to compute irq priority */ + uint8_t irq_base; + uint8_t read_reg_select; + uint8_t special_mask; + uint8_t init_state; + uint8_t auto_eoi; + uint8_t rotate_on_autoeoi; + uint8_t init4; /* true if 4 byte init */ +} PicState; + +/* 0 is master pic, 1 is slave pic */ +PicState pics[2]; +int pic_irq_requested; + +/* set irq level. If an edge is detected, then the IRR is set to 1 */ +static inline void pic_set_irq1(PicState *s, int irq, int level) +{ + int mask; + mask = 1 << irq; + if (level) { + if ((s->last_irr & mask) == 0) + s->irr |= mask; + s->last_irr |= mask; + } else { + s->last_irr &= ~mask; + } +} + +static inline int get_priority(PicState *s, int mask) +{ + int priority; + if (mask == 0) + return -1; + priority = 7; + while ((mask & (1 << ((priority + s->priority_add) & 7))) == 0) + priority--; + return priority; +} + +/* return the pic wanted interrupt. return -1 if none */ +static int pic_get_irq(PicState *s) +{ + int mask, cur_priority, priority; + + mask = s->irr & ~s->imr; + priority = get_priority(s, mask); + if (priority < 0) + return -1; + /* compute current priority */ + cur_priority = get_priority(s, s->isr); + if (priority > cur_priority) { + /* higher priority found: an irq should be generated */ + return priority; + } else { + return -1; + } +} + +void pic_set_irq(int irq, int level) +{ + pic_set_irq1(&pics[irq >> 3], irq & 7, level); +} + +/* can be called at any time outside cpu_exec() to raise irqs if + necessary */ +void pic_handle_irq(void) +{ + int irq2, irq; + + /* first look at slave pic */ + irq2 = pic_get_irq(&pics[1]); + if (irq2 >= 0) { + /* if irq request by slave pic, signal master PIC */ + pic_set_irq1(&pics[0], 2, 1); + pic_set_irq1(&pics[0], 2, 0); + } + /* look at requested irq */ + irq = pic_get_irq(&pics[0]); + if (irq >= 0) { + if (irq == 2) { + /* from slave pic */ + pic_irq_requested = 8 + irq2; + } else { + /* from master pic */ + pic_irq_requested = irq; + } + global_env->hard_interrupt_request = 1; + } +} + +int cpu_x86_get_pic_interrupt(CPUX86State *env) +{ + int irq, irq2, intno; + + /* signal the pic that the irq was acked by the CPU */ + irq = pic_irq_requested; + if (irq >= 8) { + irq2 = irq & 7; + pics[1].isr |= (1 << irq2); + pics[1].irr &= ~(1 << irq2); + irq = 2; + intno = pics[1].irq_base + irq2; + } else { + intno = pics[0].irq_base + irq; + } + pics[0].isr |= (1 << irq); + pics[0].irr &= ~(1 << irq); + return intno; +} + +void pic_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) +{ + PicState *s; + int priority; + + s = &pics[addr >> 7]; + addr &= 1; + if (addr == 0) { + if (val & 0x10) { + /* init */ + memset(s, 0, sizeof(PicState)); + s->init_state = 1; + s->init4 = val & 1; + if (val & 0x02) + hw_error("single mode not supported"); + if (val & 0x08) + hw_error("level sensitive irq not supported"); + } else if (val & 0x08) { + if (val & 0x02) + s->read_reg_select = val & 1; + if (val & 0x40) + s->special_mask = (val >> 5) & 1; + } else { + switch(val) { + case 0x00: + case 0x80: + s->rotate_on_autoeoi = val >> 7; + break; + case 0x20: /* end of interrupt */ + case 0xa0: + priority = get_priority(s, s->isr); + if (priority >= 0) { + s->isr &= ~(1 << ((priority + s->priority_add) & 7)); + } + if (val == 0xa0) + s->priority_add = (s->priority_add + 1) & 7; + break; + case 0x60 ... 0x67: + priority = val & 7; + s->isr &= ~(1 << priority); + break; + case 0xc0 ... 0xc7: + s->priority_add = (val + 1) & 7; + break; + case 0xe0 ... 0xe7: + priority = val & 7; + s->isr &= ~(1 << priority); + s->priority_add = (priority + 1) & 7; + break; + } + } + } else { + switch(s->init_state) { + case 0: + /* normal mode */ + s->imr = val; + break; + case 1: + s->irq_base = val & 0xf8; + s->init_state = 2; + break; + case 2: + if (s->init4) { + s->init_state = 3; + } else { + s->init_state = 0; + } + break; + case 3: + s->auto_eoi = (val >> 1) & 1; + s->init_state = 0; + break; + } + } +} + +uint32_t pic_ioport_read(CPUX86State *env, uint32_t addr) +{ + PicState *s; + s = &pics[addr >> 7]; + addr &= 1; + if (addr == 0) { + if (s->read_reg_select) + return s->isr; + else + return s->irr; + } else { + return s->imr; + } +} + +void pic_init(void) +{ + register_ioport_writeb(0x20, 2, pic_ioport_write); + register_ioport_readb(0x20, 2, pic_ioport_read); + register_ioport_writeb(0xa0, 2, pic_ioport_write); + register_ioport_readb(0xa0, 2, pic_ioport_read); +} + +/***********************************************************/ +/* 8253 PIT emulation */ + +#define PIT_FREQ 1193182 + +#define RW_STATE_LSB 0 +#define RW_STATE_MSB 1 +#define RW_STATE_WORD0 2 +#define RW_STATE_WORD1 3 +#define RW_STATE_LATCHED_WORD0 4 +#define RW_STATE_LATCHED_WORD1 5 + +typedef struct PITChannelState { + uint16_t count; + uint16_t latched_count; + uint8_t rw_state; + uint8_t mode; + uint8_t bcd; /* not supported */ + uint8_t gate; /* timer start */ + int64_t count_load_time; +} PITChannelState; + +PITChannelState pit_channels[3]; +int speaker_data_on; + +int64_t ticks_per_sec; + +int64_t get_clock(void) +{ + struct timeval tv; + gettimeofday(&tv, NULL); + return tv.tv_sec * 1000000LL + tv.tv_usec; +} + +int64_t cpu_get_ticks(void) +{ + int64_t val; + asm("rdtsc" : "=A" (val)); + return val; +} + +void cpu_calibrate_ticks(void) +{ + int64_t usec, ticks; + + usec = get_clock(); + ticks = cpu_get_ticks(); + usleep(50 * 1000); + usec = get_clock() - usec; + ticks = cpu_get_ticks() - ticks; + ticks_per_sec = (ticks * 1000000LL + (usec >> 1)) / usec; +} + +static int pit_get_count(PITChannelState *s) +{ + int64_t d; + int counter; + + d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) / + ticks_per_sec; + switch(s->mode) { + case 0: + case 1: + case 4: + case 5: + counter = (s->count - d) & 0xffff; + break; + default: + counter = s->count - (d % s->count); + break; + } + return counter; +} + +/* get pit output bit */ +static int pit_get_out(PITChannelState *s) +{ + int64_t d; + int out; + + d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) / + ticks_per_sec; + switch(s->mode) { + default: + case 0: + out = (d >= s->count); + break; + case 1: + out = (d < s->count); + break; + case 2: + if ((d % s->count) == 0 && d != 0) + out = 1; + else + out = 0; + break; + case 3: + out = (d % s->count) < (s->count >> 1); + break; + case 4: + case 5: + out = (d == s->count); + break; + } + return out; +} + +void pit_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) +{ + int channel, access; + PITChannelState *s; + + addr &= 3; + if (addr == 3) { + channel = val >> 6; + if (channel == 3) + return; + s = &pit_channels[channel]; + access = (val >> 4) & 3; + switch(access) { + case 0: + s->latched_count = pit_get_count(s); + s->rw_state = RW_STATE_LATCHED_WORD0; + break; + default: + s->rw_state = access - 1 + RW_STATE_LSB; + break; + } + s->mode = (val >> 1) & 7; + s->bcd = val & 1; + } else { + s = &pit_channels[addr]; + switch(s->rw_state) { + case RW_STATE_LSB: + s->count_load_time = cpu_get_ticks(); + s->count = val; + break; + case RW_STATE_MSB: + s->count_load_time = cpu_get_ticks(); + s->count = (val << 8); + break; + case RW_STATE_WORD0: + case RW_STATE_WORD1: + if (s->rw_state & 1) { + s->count_load_time = cpu_get_ticks(); + s->count = (s->latched_count & 0xff) | (val << 8); + } else { + s->latched_count = val; + } + s->rw_state ^= 1; + break; + } + } +} + +uint32_t pit_ioport_read(CPUX86State *env, uint32_t addr) +{ + int ret, count; + PITChannelState *s; + + addr &= 3; + s = &pit_channels[addr]; + switch(s->rw_state) { + case RW_STATE_LSB: + case RW_STATE_MSB: + case RW_STATE_WORD0: + case RW_STATE_WORD1: + count = pit_get_count(s); + if (s->rw_state & 1) + ret = (count >> 8) & 0xff; + else + ret = count & 0xff; + if (s->rw_state & 2) + s->rw_state ^= 1; + break; + default: + case RW_STATE_LATCHED_WORD0: + case RW_STATE_LATCHED_WORD1: + if (s->rw_state & 1) + ret = s->latched_count >> 8; + else + ret = s->latched_count & 0xff; + s->rw_state ^= 1; + break; + } + return ret; +} + +void speaker_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) +{ + speaker_data_on = (val >> 1) & 1; + pit_channels[2].gate = val & 1; +} + +uint32_t speaker_ioport_read(CPUX86State *env, uint32_t addr) +{ + int out; + out = pit_get_out(&pit_channels[2]); + return (speaker_data_on << 1) | pit_channels[2].gate | (out << 5); +} + +void pit_init(void) +{ + pit_channels[0].gate = 1; + pit_channels[1].gate = 1; + pit_channels[2].gate = 0; + + register_ioport_writeb(0x40, 4, pit_ioport_write); + register_ioport_readb(0x40, 3, pit_ioport_read); + + register_ioport_readb(0x61, 1, speaker_ioport_read); + register_ioport_writeb(0x61, 1, speaker_ioport_write); + cpu_calibrate_ticks(); +} + +/***********************************************************/ +/* serial port emulation */ + +#define UART_IRQ 4 + +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ + +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ + +typedef struct SerialState { + uint8_t divider; + uint8_t rbr; /* receive register */ + uint8_t ier; + uint8_t iir; /* read only */ + uint8_t lcr; + uint8_t mcr; + uint8_t lsr; /* read only */ + uint8_t msr; + uint8_t scr; +} SerialState; + +SerialState serial_ports[1]; + +void serial_update_irq(void) +{ + SerialState *s = &serial_ports[0]; + + if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) { + s->iir = UART_IIR_RDI; + } else if ((s->lsr & UART_LSR_THRE) && (s->ier & UART_IER_THRI)) { + s->iir = UART_IIR_THRI; + } else { + s->iir = UART_IIR_NO_INT; + } + if (s->iir != UART_IIR_NO_INT) { + pic_set_irq(UART_IRQ, 1); + } else { + pic_set_irq(UART_IRQ, 0); + } +} + +void serial_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) +{ + SerialState *s = &serial_ports[0]; + unsigned char ch; + int ret; + + addr &= 7; + switch(addr) { + default: + case 0: + if (s->lcr & UART_LCR_DLAB) { + s->divider = (s->divider & 0xff00) | val; + } else { + s->lsr &= ~UART_LSR_THRE; + serial_update_irq(); + + ch = val; + do { + ret = write(1, &ch, 1); + } while (ret != 1); + s->lsr |= UART_LSR_THRE; + s->lsr |= UART_LSR_TEMT; + serial_update_irq(); + } + break; + case 1: + if (s->lcr & UART_LCR_DLAB) { + s->divider = (s->divider & 0x00ff) | (val << 8); + } else { + s->ier = val; + serial_update_irq(); + } + break; + case 2: + break; + case 3: + s->lcr = val; + break; + case 4: + s->mcr = val; + break; + case 5: + break; + case 6: + s->msr = val; + break; + case 7: + s->scr = val; + break; + } +} + +uint32_t serial_ioport_read(CPUX86State *env, uint32_t addr) +{ + SerialState *s = &serial_ports[0]; + uint32_t ret; + + addr &= 7; + switch(addr) { + default: + case 0: + if (s->lcr & UART_LCR_DLAB) { + ret = s->divider & 0xff; + } else { + ret = s->rbr; + s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); + serial_update_irq(); + } + break; + case 1: + if (s->lcr & UART_LCR_DLAB) { + ret = (s->divider >> 8) & 0xff; + } else { + ret = s->ier; + } + break; + case 2: + ret = s->iir; + break; + case 3: + ret = s->lcr; + break; + case 4: + ret = s->mcr; + break; + case 5: + ret = s->lsr; + break; + case 6: + ret = s->msr; + break; + case 7: + ret = s->scr; + break; + } + return ret; +} + +#define TERM_ESCAPE 0x01 /* ctrl-a is used for escape */ +static int term_got_escape; + +void term_print_help(void) +{ + printf("\n" + "C-a h print this help\n" + "C-a x exit emulatior\n" + "C-a b send break (magic sysrq)\n" + "C-a C-a send C-a\n" + ); +} + +/* called when a char is received */ +void serial_received_byte(SerialState *s, int ch) +{ + if (term_got_escape) { + term_got_escape = 0; + switch(ch) { + case 'h': + term_print_help(); + break; + case 'x': + exit(0); + break; + case 'b': + /* send break */ + s->rbr = 0; + s->lsr |= UART_LSR_BI | UART_LSR_DR; + serial_update_irq(); + break; + case TERM_ESCAPE: + goto send_char; + } + } else if (ch == TERM_ESCAPE) { + term_got_escape = 1; + } else { + send_char: + s->rbr = ch; + s->lsr |= UART_LSR_DR; + serial_update_irq(); + } +} + +/* init terminal so that we can grab keys */ +static struct termios oldtty; + +static void term_exit(void) +{ + tcsetattr (0, TCSANOW, &oldtty); +} + +static void term_init(void) +{ + struct termios tty; + + tcgetattr (0, &tty); + oldtty = tty; + + tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP + |INLCR|IGNCR|ICRNL|IXON); + tty.c_oflag |= OPOST; + tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN|ISIG); + tty.c_cflag &= ~(CSIZE|PARENB); + tty.c_cflag |= CS8; + tty.c_cc[VMIN] = 1; + tty.c_cc[VTIME] = 0; + + tcsetattr (0, TCSANOW, &tty); + + atexit(term_exit); + + fcntl(0, F_SETFL, O_NONBLOCK); +} + +void serial_init(void) +{ + SerialState *s = &serial_ports[0]; + + s->lsr = UART_LSR_TEMT | UART_LSR_THRE; + + register_ioport_writeb(0x3f8, 8, serial_ioport_write); + register_ioport_readb(0x3f8, 8, serial_ioport_read); + + term_init(); +} + +/* cpu signal handler */ +static void host_segv_handler(int host_signum, siginfo_t *info, + void *puc) +{ + if (cpu_signal_handler(host_signum, info, puc)) + return; + term_exit(); + abort(); +} + +static int timer_irq_pending; + +static void host_alarm_handler(int host_signum, siginfo_t *info, + void *puc) +{ + /* just exit from the cpu to have a change to handle timers */ + cpu_x86_interrupt(global_env); + timer_irq_pending = 1; +} + +void help(void) +{ + printf("Virtual Linux version " QEMU_VERSION ", Copyright (c) 2003 Fabrice Bellard\n" + "usage: vl [-h] bzImage initrd [kernel parameters...]\n" + "\n" + "'bzImage' is a Linux kernel image (PAGE_OFFSET must be defined\n" + "to 0x90000000 in asm/page.h and arch/i386/vmlinux.lds)\n" + "'initrd' is an initrd image\n" + "-m megs set virtual RAM size to megs MB\n" + "-d output log in /tmp/vl.log\n" + "\n" + "During emulation, use C-a h to get terminal commands:\n" + ); + term_print_help(); + exit(1); +} + +int main(int argc, char **argv) +{ + int c, ret, initrd_size, i; + struct linux_params *params; + struct sigaction act; + struct itimerval itv; + CPUX86State *env; + + /* we never want that malloc() uses mmap() */ + mallopt(M_MMAP_THRESHOLD, 4096 * 1024); + + phys_ram_size = 32 * 1024 * 1024; + for(;;) { + c = getopt(argc, argv, "hm:d"); + if (c == -1) + break; + switch(c) { + case 'h': + help(); + break; + case 'm': + phys_ram_size = atoi(optarg) * 1024 * 1024; + if (phys_ram_size <= 0) + help(); + break; + case 'd': + loglevel = 1; + break; + } + } + if (optind + 1 >= argc) + help(); + + /* init debug */ + if (loglevel) { + logfile = fopen(DEBUG_LOGFILE, "w"); + if (!logfile) { + perror(DEBUG_LOGFILE); + _exit(1); + } + setvbuf(logfile, NULL, _IOLBF, 0); + } + + /* init the memory */ + strcpy(phys_ram_file, "/tmp/vlXXXXXX"); + if (mkstemp(phys_ram_file) < 0) { + fprintf(stderr, "Could not create temporary memory file\n"); + exit(1); + } + phys_ram_fd = open(phys_ram_file, O_CREAT | O_TRUNC | O_RDWR, 0600); + if (phys_ram_fd < 0) { + fprintf(stderr, "Could not open temporary memory file\n"); + exit(1); + } + ftruncate(phys_ram_fd, phys_ram_size); + unlink(phys_ram_file); + phys_ram_base = mmap((void *)PHYS_RAM_BASE, phys_ram_size, + PROT_WRITE | PROT_READ, MAP_SHARED | MAP_FIXED, + phys_ram_fd, 0); + if (phys_ram_base == MAP_FAILED) { + fprintf(stderr, "Could not map physical memory\n"); + exit(1); + } + + /* now we can load the kernel */ + ret = load_kernel(argv[optind], phys_ram_base + KERNEL_LOAD_ADDR); + if (ret < 0) { + fprintf(stderr, "%s: could not load kernel\n", argv[optind]); + exit(1); + } + + /* load initrd */ + initrd_size = load_image(argv[optind + 1], phys_ram_base + INITRD_LOAD_ADDR); + if (initrd_size < 0) { + fprintf(stderr, "%s: could not load initrd\n", argv[optind + 1]); + exit(1); + } + + /* init kernel params */ + params = (void *)(phys_ram_base + KERNEL_PARAMS_ADDR); + memset(params, 0, sizeof(struct linux_params)); + params->mount_root_rdonly = 0; + params->cl_magic = 0xA33F; + params->cl_offset = params->commandline - (uint8_t *)params; + params->ext_mem_k = (phys_ram_size / 1024) - 1024; + for(i = optind + 2; i < argc; i++) { + if (i != optind + 2) + pstrcat(params->commandline, sizeof(params->commandline), " "); + pstrcat(params->commandline, sizeof(params->commandline), argv[i]); + } + params->loader_type = 0x01; + if (initrd_size > 0) { + params->initrd_start = INITRD_LOAD_ADDR; + params->initrd_size = initrd_size; + } + params->orig_video_lines = 25; + params->orig_video_cols = 80; + + /* init basic PC hardware */ + init_ioports(); + register_ioport_writeb(0x80, 1, ioport80_write); + + register_ioport_writeb(0x3d4, 2, vga_ioport_write); + + cmos_init(); + pic_init(); + pit_init(); + serial_init(); + + /* setup cpu signal handlers for MMU / self modifying code handling */ + sigfillset(&act.sa_mask); + act.sa_flags = SA_SIGINFO; + act.sa_sigaction = host_segv_handler; + sigaction(SIGSEGV, &act, NULL); + sigaction(SIGBUS, &act, NULL); + + act.sa_sigaction = host_alarm_handler; + sigaction(SIGALRM, &act, NULL); + + /* init CPU state */ + env = cpu_init(); + global_env = env; + + /* setup basic memory access */ + env->cr[0] = 0x00000033; + cpu_x86_init_mmu(env); + + memset(params->idt_table, 0, sizeof(params->idt_table)); + + params->gdt_table[2] = 0x00cf9a000000ffffLL; /* KERNEL_CS */ + params->gdt_table[3] = 0x00cf92000000ffffLL; /* KERNEL_DS */ + + env->idt.base = (void *)params->idt_table; + env->idt.limit = sizeof(params->idt_table) - 1; + env->gdt.base = (void *)params->gdt_table; + env->gdt.limit = sizeof(params->gdt_table) - 1; + + cpu_x86_load_seg(env, R_CS, KERNEL_CS); + cpu_x86_load_seg(env, R_DS, KERNEL_DS); + cpu_x86_load_seg(env, R_ES, KERNEL_DS); + cpu_x86_load_seg(env, R_SS, KERNEL_DS); + cpu_x86_load_seg(env, R_FS, KERNEL_DS); + cpu_x86_load_seg(env, R_GS, KERNEL_DS); + + env->eip = KERNEL_LOAD_ADDR; + env->regs[R_ESI] = KERNEL_PARAMS_ADDR; + env->eflags = 0x2; + + itv.it_interval.tv_sec = 0; + itv.it_interval.tv_usec = 10 * 1000; + itv.it_value.tv_sec = 0; + itv.it_value.tv_usec = 10 * 1000; + setitimer(ITIMER_REAL, &itv, NULL); + + for(;;) { + struct pollfd ufds[1], *pf; + int ret, n, timeout; + uint8_t ch; + + ret = cpu_x86_exec(env); + + /* if hlt instruction, we wait until the next IRQ */ + if (ret == EXCP_HLT) + timeout = 10; + else + timeout = 0; + /* poll any events */ + pf = ufds; + if (!(serial_ports[0].lsr & UART_LSR_DR)) { + pf->fd = 0; + pf->events = POLLIN; + pf++; + } + ret = poll(ufds, pf - ufds, timeout); + if (ret > 0) { + if (ufds[0].revents & POLLIN) { + n = read(0, &ch, 1); + if (n == 1) { + serial_received_byte(&serial_ports[0], ch); + } + } + } + + /* just for testing */ + if (timer_irq_pending) { + pic_set_irq(0, 1); + pic_set_irq(0, 0); + timer_irq_pending = 0; + } + + pic_handle_irq(); + } + + return 0; +} |