i386: add ACPI table files from seabios

This adds ASL code as well as scripts for processing it,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd

Will be used for runtime acpi table generation.

Note:
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.

Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:

 src/acpi-dsdt-cpu-hotplug.dsl
 src/acpi-dsdt-dbug.dsl
 src/acpi-dsdt-hpet.dsl
 src/acpi-dsdt-isa.dsl
 src/acpi-dsdt-pci-crs.dsl
 src/acpi.c
 src/acpi.h
 src/ssdt-misc.dsl
 src/ssdt-pcihp.dsl
 src/ssdt-proc.dsl
 tools/acpi_extract.py
 tools/acpi_extract_preprocess.py

Each one of the listed people agreed to the following:

> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>

  Acked-by: Gerd Hoffmann <kraxel@redhat.com>
  Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
  Acked-by: Jason Baron <jbaron@akamai.com>
  Acked-by: David Woodhouse <David.Woodhouse@intel.com>
  Acked-by: Gleb Natapov <gleb@redhat.com>
  Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
  Acked-by: Dave Frodin <dave.frodin@se-eng.com>
  Acked-by: Paolo Bonzini <pbonzini@redhat.com>
  Acked-by: Kevin O'Connor <kevin@koconnor.net>
  Acked-by: Laszlo Ersek <lersek@redhat.com>
  Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
  Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
  Acked-by: Magnus Christensson <magnus.christensson@intel.com>
  Acked-by: Hu Tao <hutao@cn.fujitsu.com>
  Acked-by: Eduardo Habkost <ehabkost@redhat.com>

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

12 files changed, 1848 insertions, 0 deletions

diff --git a/hw/i386/acpi-dsdt-cpu-hotplug.dsl b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
new file mode 100644
index 0000000..c96ac42
--- /dev/null
+++ b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
@@ -0,0 +1,93 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/****************************************************************
+ * CPU hotplug
+ ****************************************************************/
+
+Scope(\_SB) {
+    /* Objects filled in by run-time generated SSDT */
+    External(NTFY, MethodObj)
+    External(CPON, PkgObj)
+
+    /* Methods called by run-time generated SSDT Processor objects */
+    Method(CPMA, 1, NotSerialized) {
+        // _MAT method - create an madt apic buffer
+        // Arg0 = Processor ID = Local APIC ID
+        // Local0 = CPON flag for this cpu
+        Store(DerefOf(Index(CPON, Arg0)), Local0)
+        // Local1 = Buffer (in madt apic form) to return
+        Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1)
+        // Update the processor id, lapic id, and enable/disable status
+        Store(Arg0, Index(Local1, 2))
+        Store(Arg0, Index(Local1, 3))
+        Store(Local0, Index(Local1, 4))
+        Return (Local1)
+    }
+    Method(CPST, 1, NotSerialized) {
+        // _STA method - return ON status of cpu
+        // Arg0 = Processor ID = Local APIC ID
+        // Local0 = CPON flag for this cpu
+        Store(DerefOf(Index(CPON, Arg0)), Local0)
+        If (Local0) {
+            Return (0xF)
+        } Else {
+            Return (0x0)
+        }
+    }
+    Method(CPEJ, 2, NotSerialized) {
+        // _EJ0 method - eject callback
+        Sleep(200)
+    }
+
+    /* CPU hotplug notify method */
+    OperationRegion(PRST, SystemIO, 0xaf00, 32)
+    Field(PRST, ByteAcc, NoLock, Preserve) {
+        PRS, 256
+    }
+    Method(PRSC, 0) {
+        // Local5 = active cpu bitmap
+        Store(PRS, Local5)
+        // Local2 = last read byte from bitmap
+        Store(Zero, Local2)
+        // Local0 = Processor ID / APIC ID iterator
+        Store(Zero, Local0)
+        While (LLess(Local0, SizeOf(CPON))) {
+            // Local1 = CPON flag for this cpu
+            Store(DerefOf(Index(CPON, Local0)), Local1)
+            If (And(Local0, 0x07)) {
+                // Shift down previously read bitmap byte
+                ShiftRight(Local2, 1, Local2)
+            } Else {
+                // Read next byte from cpu bitmap
+                Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2)
+            }
+            // Local3 = active state for this cpu
+            Store(And(Local2, 1), Local3)
+
+            If (LNotEqual(Local1, Local3)) {
+                // State change - update CPON with new state
+                Store(Local3, Index(CPON, Local0))
+                // Do CPU notify
+                If (LEqual(Local3, 1)) {
+                    NTFY(Local0, 1)
+                } Else {
+                    NTFY(Local0, 3)
+                }
+            }
+            Increment(Local0)
+        }
+    }
+}
diff --git a/hw/i386/acpi-dsdt-dbug.dsl b/hw/i386/acpi-dsdt-dbug.dsl
new file mode 100644
index 0000000..86230f7
--- /dev/null
+++ b/hw/i386/acpi-dsdt-dbug.dsl
@@ -0,0 +1,41 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/****************************************************************
+ * Debugging
+ ****************************************************************/
+
+Scope(\) {
+    /* Debug Output */
+    OperationRegion(DBG, SystemIO, 0x0402, 0x01)
+    Field(DBG, ByteAcc, NoLock, Preserve) {
+        DBGB,   8,
+    }
+
+    /* Debug method - use this method to send output to the QEMU
+     * BIOS debug port.  This method handles strings, integers,
+     * and buffers.  For example: DBUG("abc") DBUG(0x123) */
+    Method(DBUG, 1) {
+        ToHexString(Arg0, Local0)
+        ToBuffer(Local0, Local0)
+        Subtract(SizeOf(Local0), 1, Local1)
+        Store(Zero, Local2)
+        While (LLess(Local2, Local1)) {
+            Store(DerefOf(Index(Local0, Local2)), DBGB)
+            Increment(Local2)
+        }
+        Store(0x0A, DBGB)
+    }
+}
diff --git a/hw/i386/acpi-dsdt-hpet.dsl b/hw/i386/acpi-dsdt-hpet.dsl
new file mode 100644
index 0000000..dfde174
--- /dev/null
+++ b/hw/i386/acpi-dsdt-hpet.dsl
@@ -0,0 +1,51 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/****************************************************************
+ * HPET
+ ****************************************************************/
+
+Scope(\_SB) {
+    Device(HPET) {
+        Name(_HID, EISAID("PNP0103"))
+        Name(_UID, 0)
+        OperationRegion(HPTM, SystemMemory, 0xFED00000, 0x400)
+        Field(HPTM, DWordAcc, Lock, Preserve) {
+            VEND, 32,
+            PRD, 32,
+        }
+        Method(_STA, 0, NotSerialized) {
+            Store(VEND, Local0)
+            Store(PRD, Local1)
+            ShiftRight(Local0, 16, Local0)
+            If (LOr(LEqual(Local0, 0), LEqual(Local0, 0xffff))) {
+                Return (0x0)
+            }
+            If (LOr(LEqual(Local1, 0), LGreater(Local1, 100000000))) {
+                Return (0x0)
+            }
+            Return (0x0F)
+        }
+        Name(_CRS, ResourceTemplate() {
+#if 0       /* This makes WinXP BSOD for not yet figured reasons. */
+            IRQNoFlags() {2, 8}
+#endif
+            Memory32Fixed(ReadOnly,
+                0xFED00000,         // Address Base
+                0x00000400,         // Address Length
+                )
+        })
+    }
+}
diff --git a/hw/i386/acpi-dsdt-isa.dsl b/hw/i386/acpi-dsdt-isa.dsl
new file mode 100644
index 0000000..89caa16
--- /dev/null
+++ b/hw/i386/acpi-dsdt-isa.dsl
@@ -0,0 +1,117 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Common legacy ISA style devices. */
+Scope(\_SB.PCI0.ISA) {
+
+    Device(RTC) {
+        Name(_HID, EisaId("PNP0B00"))
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x0070, 0x0070, 0x10, 0x02)
+            IRQNoFlags() { 8 }
+            IO(Decode16, 0x0072, 0x0072, 0x02, 0x06)
+        })
+    }
+
+    Device(KBD) {
+        Name(_HID, EisaId("PNP0303"))
+        Method(_STA, 0, NotSerialized) {
+            Return (0x0f)
+        }
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x0060, 0x0060, 0x01, 0x01)
+            IO(Decode16, 0x0064, 0x0064, 0x01, 0x01)
+            IRQNoFlags() { 1 }
+        })
+    }
+
+    Device(MOU) {
+        Name(_HID, EisaId("PNP0F13"))
+        Method(_STA, 0, NotSerialized) {
+            Return (0x0f)
+        }
+        Name(_CRS, ResourceTemplate() {
+            IRQNoFlags() { 12 }
+        })
+    }
+
+    Device(FDC0) {
+        Name(_HID, EisaId("PNP0700"))
+        Method(_STA, 0, NotSerialized) {
+            Store(FDEN, Local0)
+            If (LEqual(Local0, 0)) {
+                Return (0x00)
+            } Else {
+                Return (0x0F)
+            }
+        }
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04)
+            IO(Decode16, 0x03F7, 0x03F7, 0x00, 0x01)
+            IRQNoFlags() { 6 }
+            DMA(Compatibility, NotBusMaster, Transfer8) { 2 }
+        })
+    }
+
+    Device(LPT) {
+        Name(_HID, EisaId("PNP0400"))
+        Method(_STA, 0, NotSerialized) {
+            Store(LPEN, Local0)
+            If (LEqual(Local0, 0)) {
+                Return (0x00)
+            } Else {
+                Return (0x0F)
+            }
+        }
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x0378, 0x0378, 0x08, 0x08)
+            IRQNoFlags() { 7 }
+        })
+    }
+
+    Device(COM1) {
+        Name(_HID, EisaId("PNP0501"))
+        Name(_UID, 0x01)
+        Method(_STA, 0, NotSerialized) {
+            Store(CAEN, Local0)
+            If (LEqual(Local0, 0)) {
+                Return (0x00)
+            } Else {
+                Return (0x0F)
+            }
+        }
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x03F8, 0x03F8, 0x00, 0x08)
+            IRQNoFlags() { 4 }
+        })
+    }
+
+    Device(COM2) {
+        Name(_HID, EisaId("PNP0501"))
+        Name(_UID, 0x02)
+        Method(_STA, 0, NotSerialized) {
+            Store(CBEN, Local0)
+            If (LEqual(Local0, 0)) {
+                Return (0x00)
+            } Else {
+                Return (0x0F)
+            }
+        }
+        Name(_CRS, ResourceTemplate() {
+            IO(Decode16, 0x02F8, 0x02F8, 0x00, 0x08)
+            IRQNoFlags() { 3 }
+        })
+    }
+}
diff --git a/hw/i386/acpi-dsdt-pci-crs.dsl b/hw/i386/acpi-dsdt-pci-crs.dsl
new file mode 100644
index 0000000..b375a19
--- /dev/null
+++ b/hw/i386/acpi-dsdt-pci-crs.dsl
@@ -0,0 +1,105 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* PCI CRS (current resources) definition. */
+Scope(\_SB.PCI0) {
+
+    Name(CRES, ResourceTemplate() {
+        WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode,
+            0x0000,             // Address Space Granularity
+            0x0000,             // Address Range Minimum
+            0x00FF,             // Address Range Maximum
+            0x0000,             // Address Translation Offset
+            0x0100,             // Address Length
+            ,, )
+        IO(Decode16,
+            0x0CF8,             // Address Range Minimum
+            0x0CF8,             // Address Range Maximum
+            0x01,               // Address Alignment
+            0x08,               // Address Length
+            )
+        WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+            0x0000,             // Address Space Granularity
+            0x0000,             // Address Range Minimum
+            0x0CF7,             // Address Range Maximum
+            0x0000,             // Address Translation Offset
+            0x0CF8,             // Address Length
+            ,, , TypeStatic)
+        WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+            0x0000,             // Address Space Granularity
+            0x0D00,             // Address Range Minimum
+            0xFFFF,             // Address Range Maximum
+            0x0000,             // Address Translation Offset
+            0xF300,             // Address Length
+            ,, , TypeStatic)
+        DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+            0x00000000,         // Address Space Granularity
+            0x000A0000,         // Address Range Minimum
+            0x000BFFFF,         // Address Range Maximum
+            0x00000000,         // Address Translation Offset
+            0x00020000,         // Address Length
+            ,, , AddressRangeMemory, TypeStatic)
+        DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+            0x00000000,         // Address Space Granularity
+            0xE0000000,         // Address Range Minimum
+            0xFEBFFFFF,         // Address Range Maximum
+            0x00000000,         // Address Translation Offset
+            0x1EC00000,         // Address Length
+            ,, PW32, AddressRangeMemory, TypeStatic)
+    })
+
+    Name(CR64, ResourceTemplate() {
+        QWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+            0x00000000,          // Address Space Granularity
+            0x8000000000,        // Address Range Minimum
+            0xFFFFFFFFFF,        // Address Range Maximum
+            0x00000000,          // Address Translation Offset
+            0x8000000000,        // Address Length
+            ,, PW64, AddressRangeMemory, TypeStatic)
+    })
+
+    Method(_CRS, 0) {
+        /* Fields provided by dynamically created ssdt */
+        External(P0S, IntObj)
+        External(P0E, IntObj)
+        External(P1V, IntObj)
+        External(P1S, BuffObj)
+        External(P1E, BuffObj)
+        External(P1L, BuffObj)
+
+        /* fixup 32bit pci io window */
+        CreateDWordField(CRES, \_SB.PCI0.PW32._MIN, PS32)
+        CreateDWordField(CRES, \_SB.PCI0.PW32._MAX, PE32)
+        CreateDWordField(CRES, \_SB.PCI0.PW32._LEN, PL32)
+        Store(P0S, PS32)
+        Store(P0E, PE32)
+        Store(Add(Subtract(P0E, P0S), 1), PL32)
+
+        If (LEqual(P1V, Zero)) {
+            Return (CRES)
+        }
+
+        /* fixup 64bit pci io window */
+        CreateQWordField(CR64, \_SB.PCI0.PW64._MIN, PS64)
+        CreateQWordField(CR64, \_SB.PCI0.PW64._MAX, PE64)
+        CreateQWordField(CR64, \_SB.PCI0.PW64._LEN, PL64)
+        Store(P1S, PS64)
+        Store(P1E, PE64)
+        Store(P1L, PL64)
+        /* add window and return result */
+        ConcatenateResTemplate(CRES, CR64, Local0)
+        Return (Local0)
+    }
+}
diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl
new file mode 100644
index 0000000..90efce0
--- /dev/null
+++ b/hw/i386/acpi-dsdt.dsl
@@ -0,0 +1,343 @@
+/*
+ * Bochs/QEMU ACPI DSDT ASL definition
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+ACPI_EXTRACT_ALL_CODE AcpiDsdtAmlCode
+
+DefinitionBlock (
+    "acpi-dsdt.aml",    // Output Filename
+    "DSDT",             // Signature
+    0x01,               // DSDT Compliance Revision
+    "BXPC",             // OEMID
+    "BXDSDT",           // TABLE ID
+    0x1                 // OEM Revision
+    )
+{
+
+#include "acpi-dsdt-dbug.dsl"
+
+
+/****************************************************************
+ * PCI Bus definition
+ ****************************************************************/
+
+    Scope(\_SB) {
+        Device(PCI0) {
+            Name(_HID, EisaId("PNP0A03"))
+            Name(_ADR, 0x00)
+            Name(_UID, 1)
+        }
+    }
+
+#include "acpi-dsdt-pci-crs.dsl"
+#include "acpi-dsdt-hpet.dsl"
+
+
+/****************************************************************
+ * VGA
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        Device(VGA) {
+            Name(_ADR, 0x00020000)
+            OperationRegion(PCIC, PCI_Config, Zero, 0x4)
+            Field(PCIC, DWordAcc, NoLock, Preserve) {
+                VEND, 32
+            }
+            Method(_S1D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S2D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S3D, 0, NotSerialized) {
+                If (LEqual(VEND, 0x1001b36)) {
+                    Return (0x03)           // QXL
+                } Else {
+                    Return (0x00)
+                }
+            }
+        }
+    }
+
+
+/****************************************************************
+ * PIIX4 PM
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        Device(PX13) {
+            Name(_ADR, 0x00010003)
+            OperationRegion(P13C, PCI_Config, 0x00, 0xff)
+        }
+    }
+
+
+/****************************************************************
+ * PIIX3 ISA bridge
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        Device(ISA) {
+            Name(_ADR, 0x00010000)
+
+            /* PIIX PCI to ISA irq remapping */
+            OperationRegion(P40C, PCI_Config, 0x60, 0x04)
+
+            /* enable bits */
+            Field(\_SB.PCI0.PX13.P13C, AnyAcc, NoLock, Preserve) {
+                Offset(0x5f),
+                , 7,
+                LPEN, 1,         // LPT
+                Offset(0x67),
+                , 3,
+                CAEN, 1,         // COM1
+                , 3,
+                CBEN, 1,         // COM2
+            }
+            Name(FDEN, 1)
+        }
+    }
+
+#include "acpi-dsdt-isa.dsl"
+
+
+/****************************************************************
+ * PCI hotplug
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        OperationRegion(PCST, SystemIO, 0xae00, 0x08)
+        Field(PCST, DWordAcc, NoLock, WriteAsZeros) {
+            PCIU, 32,
+            PCID, 32,
+        }
+
+        OperationRegion(SEJ, SystemIO, 0xae08, 0x04)
+        Field(SEJ, DWordAcc, NoLock, WriteAsZeros) {
+            B0EJ, 32,
+        }
+
+        /* Methods called by bulk generated PCI devices below */
+
+        /* Methods called by hotplug devices */
+        Method(PCEJ, 1, NotSerialized) {
+            // _EJ0 method - eject callback
+            Store(ShiftLeft(1, Arg0), B0EJ)
+            Return (0x0)
+        }
+
+        /* Hotplug notification method supplied by SSDT */
+        External(\_SB.PCI0.PCNT, MethodObj)
+
+        /* PCI hotplug notify method */
+        Method(PCNF, 0) {
+            // Local0 = iterator
+            Store(Zero, Local0)
+            While (LLess(Local0, 31)) {
+                Increment(Local0)
+                If (And(PCIU, ShiftLeft(1, Local0))) {
+                    PCNT(Local0, 1)
+                }
+                If (And(PCID, ShiftLeft(1, Local0))) {
+                    PCNT(Local0, 3)
+                }
+            }
+        }
+    }
+
+
+/****************************************************************
+ * PCI IRQs
+ ****************************************************************/
+
+    Scope(\_SB) {
+        Scope(PCI0) {
+            Name(_PRT, Package() {
+                /* PCI IRQ routing table, example from ACPI 2.0a specification,
+                   section 6.2.8.1 */
+                /* Note: we provide the same info as the PCI routing
+                   table of the Bochs BIOS */
+
+#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \
+    Package() { nr##ffff, 0, lnk0, 0 }, \
+    Package() { nr##ffff, 1, lnk1, 0 }, \
+    Package() { nr##ffff, 2, lnk2, 0 }, \
+    Package() { nr##ffff, 3, lnk3, 0 }
+
+#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC)
+#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD)
+#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA)
+#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB)
+
+                prt_slot0(0x0000),
+                /* Device 1 is power mgmt device, and can only use irq 9 */
+                prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD),
+                prt_slot2(0x0002),
+                prt_slot3(0x0003),
+                prt_slot0(0x0004),
+                prt_slot1(0x0005),
+                prt_slot2(0x0006),
+                prt_slot3(0x0007),
+                prt_slot0(0x0008),
+                prt_slot1(0x0009),
+                prt_slot2(0x000a),
+                prt_slot3(0x000b),
+                prt_slot0(0x000c),
+                prt_slot1(0x000d),
+                prt_slot2(0x000e),
+                prt_slot3(0x000f),
+                prt_slot0(0x0010),
+                prt_slot1(0x0011),
+                prt_slot2(0x0012),
+                prt_slot3(0x0013),
+                prt_slot0(0x0014),
+                prt_slot1(0x0015),
+                prt_slot2(0x0016),
+                prt_slot3(0x0017),
+                prt_slot0(0x0018),
+                prt_slot1(0x0019),
+                prt_slot2(0x001a),
+                prt_slot3(0x001b),
+                prt_slot0(0x001c),
+                prt_slot1(0x001d),
+                prt_slot2(0x001e),
+                prt_slot3(0x001f),
+            })
+        }
+
+        Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) {
+            PRQ0,   8,
+            PRQ1,   8,
+            PRQ2,   8,
+            PRQ3,   8
+        }
+
+        Method(IQST, 1, NotSerialized) {
+            // _STA method - get status
+            If (And(0x80, Arg0)) {
+                Return (0x09)
+            }
+            Return (0x0B)
+        }
+        Method(IQCR, 1, NotSerialized) {
+            // _CRS method - get current settings
+            Name(PRR0, ResourceTemplate() {
+                Interrupt(, Level, ActiveHigh, Shared) { 0 }
+            })
+            CreateDWordField(PRR0, 0x05, PRRI)
+            If (LLess(Arg0, 0x80)) {
+                Store(Arg0, PRRI)
+            }
+            Return (PRR0)
+        }
+
+#define define_link(link, uid, reg)                             \
+        Device(link) {                                          \
+            Name(_HID, EISAID("PNP0C0F"))                       \
+            Name(_UID, uid)                                     \
+            Name(_PRS, ResourceTemplate() {                     \
+                Interrupt(, Level, ActiveHigh, Shared) {        \
+                    5, 10, 11                                   \
+                }                                               \
+            })                                                  \
+            Method(_STA, 0, NotSerialized) {                    \
+                Return (IQST(reg))                              \
+            }                                                   \
+            Method(_DIS, 0, NotSerialized) {                    \
+                Or(reg, 0x80, reg)                              \
+            }                                                   \
+            Method(_CRS, 0, NotSerialized) {                    \
+                Return (IQCR(reg))                              \
+            }                                                   \
+            Method(_SRS, 1, NotSerialized) {                    \
+                CreateDWordField(Arg0, 0x05, PRRI)              \
+                Store(PRRI, reg)                                \
+            }                                                   \
+        }
+
+        define_link(LNKA, 0, PRQ0)
+        define_link(LNKB, 1, PRQ1)
+        define_link(LNKC, 2, PRQ2)
+        define_link(LNKD, 3, PRQ3)
+
+        Device(LNKS) {
+            Name(_HID, EISAID("PNP0C0F"))
+            Name(_UID, 4)
+            Name(_PRS, ResourceTemplate() {
+                Interrupt(, Level, ActiveHigh, Shared) { 9 }
+            })
+
+            // The SCI cannot be disabled and is always attached to GSI 9,
+            // so these are no-ops.  We only need this link to override the
+            // polarity to active high and match the content of the MADT.
+            Method(_STA, 0, NotSerialized) { Return (0x0b) }
+            Method(_DIS, 0, NotSerialized) { }
+            Method(_CRS, 0, NotSerialized) { Return (_PRS) }
+            Method(_SRS, 1, NotSerialized) { }
+        }
+    }
+
+#include "acpi-dsdt-cpu-hotplug.dsl"
+
+
+/****************************************************************
+ * General purpose events
+ ****************************************************************/
+
+    Scope(\_GPE) {
+        Name(_HID, "ACPI0006")
+
+        Method(_L00) {
+        }
+        Method(_E01) {
+            // PCI hotplug event
+            \_SB.PCI0.PCNF()
+        }
+        Method(_E02) {
+            // CPU hotplug event
+            \_SB.PRSC()
+        }
+        Method(_L03) {
+        }
+        Method(_L04) {
+        }
+        Method(_L05) {
+        }
+        Method(_L06) {
+        }
+        Method(_L07) {
+        }
+        Method(_L08) {
+        }
+        Method(_L09) {
+        }
+        Method(_L0A) {
+        }
+        Method(_L0B) {
+        }
+        Method(_L0C) {
+        }
+        Method(_L0D) {
+        }
+        Method(_L0E) {
+        }
+        Method(_L0F) {
+        }
+    }
+}
diff --git a/hw/i386/q35-acpi-dsdt.dsl b/hw/i386/q35-acpi-dsdt.dsl
new file mode 100644
index 0000000..21c89b0
--- /dev/null
+++ b/hw/i386/q35-acpi-dsdt.dsl
@@ -0,0 +1,452 @@
+/*
+ * Bochs/QEMU ACPI DSDT ASL definition
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+/*
+ * Copyright (c) 2010 Isaku Yamahata
+ *                    yamahata at valinux co jp
+ * Based on acpi-dsdt.dsl, but heavily modified for q35 chipset.
+ */
+
+ACPI_EXTRACT_ALL_CODE Q35AcpiDsdtAmlCode
+
+DefinitionBlock (
+    "q35-acpi-dsdt.aml",// Output Filename
+    "DSDT",             // Signature
+    0x01,               // DSDT Compliance Revision
+    "BXPC",             // OEMID
+    "BXDSDT",           // TABLE ID
+    0x2                 // OEM Revision
+    )
+{
+
+#include "acpi-dsdt-dbug.dsl"
+
+    Scope(\_SB) {
+        OperationRegion(PCST, SystemIO, 0xae00, 0x0c)
+        OperationRegion(PCSB, SystemIO, 0xae0c, 0x01)
+        Field(PCSB, AnyAcc, NoLock, WriteAsZeros) {
+            PCIB, 8,
+        }
+    }
+
+
+/****************************************************************
+ * PCI Bus definition
+ ****************************************************************/
+
+    Scope(\_SB) {
+        Device(PCI0) {
+            Name(_HID, EisaId("PNP0A08"))
+            Name(_CID, EisaId("PNP0A03"))
+            Name(_ADR, 0x00)
+            Name(_UID, 1)
+
+            // _OSC: based on sample of ACPI3.0b spec
+            Name(SUPP, 0) // PCI _OSC Support Field value
+            Name(CTRL, 0) // PCI _OSC Control Field value
+            Method(_OSC, 4) {
+                // Create DWORD-addressable fields from the Capabilities Buffer
+                CreateDWordField(Arg3, 0, CDW1)
+
+                // Check for proper UUID
+                If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
+                    // Create DWORD-addressable fields from the Capabilities Buffer
+                    CreateDWordField(Arg3, 4, CDW2)
+                    CreateDWordField(Arg3, 8, CDW3)
+
+                    // Save Capabilities DWORD2 & 3
+                    Store(CDW2, SUPP)
+                    Store(CDW3, CTRL)
+
+                    // Always allow native PME, AER (no dependencies)
+                    // Never allow SHPC (no SHPC controller in this system)
+                    And(CTRL, 0x1D, CTRL)
+
+#if 0 // For now, nothing to do
+                    If (Not(And(CDW1, 1))) { // Query flag clear?
+                        // Disable GPEs for features granted native control.
+                        If (And(CTRL, 0x01)) { // Hot plug control granted?
+                            Store(0, HPCE) // clear the hot plug SCI enable bit
+                            Store(1, HPCS) // clear the hot plug SCI status bit
+                        }
+                        If (And(CTRL, 0x04)) { // PME control granted?
+                            Store(0, PMCE) // clear the PME SCI enable bit
+                            Store(1, PMCS) // clear the PME SCI status bit
+                        }
+                        If (And(CTRL, 0x10)) { // OS restoring PCI Express cap structure?
+                            // Set status to not restore PCI Express cap structure
+                            // upon resume from S3
+                            Store(1, S3CR)
+                        }
+                    }
+#endif
+                    If (LNotEqual(Arg1, One)) {
+                        // Unknown revision
+                        Or(CDW1, 0x08, CDW1)
+                    }
+                    If (LNotEqual(CDW3, CTRL)) {
+                        // Capabilities bits were masked
+                        Or(CDW1, 0x10, CDW1)
+                    }
+                    // Update DWORD3 in the buffer
+                    Store(CTRL, CDW3)
+                } Else {
+                    Or(CDW1, 4, CDW1) // Unrecognized UUID
+                }
+                Return (Arg3)
+            }
+        }
+    }
+
+#include "acpi-dsdt-pci-crs.dsl"
+#include "acpi-dsdt-hpet.dsl"
+
+
+/****************************************************************
+ * VGA
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        Device(VGA) {
+            Name(_ADR, 0x00010000)
+            Method(_S1D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S2D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S3D, 0, NotSerialized) {
+                Return (0x00)
+            }
+        }
+    }
+
+
+/****************************************************************
+ * LPC ISA bridge
+ ****************************************************************/
+
+    Scope(\_SB.PCI0) {
+        /* PCI D31:f0 LPC ISA bridge */
+        Device(ISA) {
+            /* PCI D31:f0 */
+            Name(_ADR, 0x001f0000)
+
+            /* ICH9 PCI to ISA irq remapping */
+            OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C)
+
+            OperationRegion(LPCD, PCI_Config, 0x80, 0x2)
+            Field(LPCD, AnyAcc, NoLock, Preserve) {
+                COMA,   3,
+                    ,   1,
+                COMB,   3,
+
+                Offset(0x01),
+                LPTD,   2,
+                    ,   2,
+                FDCD,   2
+            }
+            OperationRegion(LPCE, PCI_Config, 0x82, 0x2)
+            Field(LPCE, AnyAcc, NoLock, Preserve) {
+                CAEN,   1,
+                CBEN,   1,
+                LPEN,   1,
+                FDEN,   1
+            }
+        }
+    }
+
+#include "acpi-dsdt-isa.dsl"
+
+
+/****************************************************************
+ * PCI IRQs
+ ****************************************************************/
+
+    /* Zero => PIC mode, One => APIC Mode */
+    Name(\PICF, Zero)
+    Method(\_PIC, 1, NotSerialized) {
+        Store(Arg0, \PICF)
+    }
+
+    Scope(\_SB) {
+        Scope(PCI0) {
+#define prt_slot_lnk(nr, lnk0, lnk1, lnk2, lnk3)  \
+    Package() { nr##ffff, 0, lnk0, 0 },           \
+    Package() { nr##ffff, 1, lnk1, 0 },           \
+    Package() { nr##ffff, 2, lnk2, 0 },           \
+    Package() { nr##ffff, 3, lnk3, 0 }
+
+#define prt_slot_lnkA(nr) prt_slot_lnk(nr, LNKA, LNKB, LNKC, LNKD)
+#define prt_slot_lnkB(nr) prt_slot_lnk(nr, LNKB, LNKC, LNKD, LNKA)
+#define prt_slot_lnkC(nr) prt_slot_lnk(nr, LNKC, LNKD, LNKA, LNKB)
+#define prt_slot_lnkD(nr) prt_slot_lnk(nr, LNKD, LNKA, LNKB, LNKC)
+
+#define prt_slot_lnkE(nr) prt_slot_lnk(nr, LNKE, LNKF, LNKG, LNKH)
+#define prt_slot_lnkF(nr) prt_slot_lnk(nr, LNKF, LNKG, LNKH, LNKE)
+#define prt_slot_lnkG(nr) prt_slot_lnk(nr, LNKG, LNKH, LNKE, LNKF)
+#define prt_slot_lnkH(nr) prt_slot_lnk(nr, LNKH, LNKE, LNKF, LNKG)
+
+            Name(PRTP, package() {
+                prt_slot_lnkE(0x0000),
+                prt_slot_lnkF(0x0001),
+                prt_slot_lnkG(0x0002),
+                prt_slot_lnkH(0x0003),
+                prt_slot_lnkE(0x0004),
+                prt_slot_lnkF(0x0005),
+                prt_slot_lnkG(0x0006),
+                prt_slot_lnkH(0x0007),
+                prt_slot_lnkE(0x0008),
+                prt_slot_lnkF(0x0009),
+                prt_slot_lnkG(0x000a),
+                prt_slot_lnkH(0x000b),
+                prt_slot_lnkE(0x000c),
+                prt_slot_lnkF(0x000d),
+                prt_slot_lnkG(0x000e),
+                prt_slot_lnkH(0x000f),
+                prt_slot_lnkE(0x0010),
+                prt_slot_lnkF(0x0011),
+                prt_slot_lnkG(0x0012),
+                prt_slot_lnkH(0x0013),
+                prt_slot_lnkE(0x0014),
+                prt_slot_lnkF(0x0015),
+                prt_slot_lnkG(0x0016),
+                prt_slot_lnkH(0x0017),
+                prt_slot_lnkE(0x0018),
+
+                /* INTA -> PIRQA for slot 25 - 31
+                   see the default value of D<N>IR */
+                prt_slot_lnkA(0x0019),
+                prt_slot_lnkA(0x001a),
+                prt_slot_lnkA(0x001b),
+                prt_slot_lnkA(0x001c),
+                prt_slot_lnkA(0x001d),
+
+                /* PCIe->PCI bridge. use PIRQ[E-H] */
+                prt_slot_lnkE(0x001e),
+
+                prt_slot_lnkA(0x001f)
+            })
+
+#define prt_slot_gsi(nr, gsi0, gsi1, gsi2, gsi3)  \
+    Package() { nr##ffff, 0, gsi0, 0 },           \
+    Package() { nr##ffff, 1, gsi1, 0 },           \
+    Package() { nr##ffff, 2, gsi2, 0 },           \
+    Package() { nr##ffff, 3, gsi3, 0 }
+
+#define prt_slot_gsiA(nr) prt_slot_gsi(nr, GSIA, GSIB, GSIC, GSID)
+#define prt_slot_gsiB(nr) prt_slot_gsi(nr, GSIB, GSIC, GSID, GSIA)
+#define prt_slot_gsiC(nr) prt_slot_gsi(nr, GSIC, GSID, GSIA, GSIB)
+#define prt_slot_gsiD(nr) prt_slot_gsi(nr, GSID, GSIA, GSIB, GSIC)
+
+#define prt_slot_gsiE(nr) prt_slot_gsi(nr, GSIE, GSIF, GSIG, GSIH)
+#define prt_slot_gsiF(nr) prt_slot_gsi(nr, GSIF, GSIG, GSIH, GSIE)
+#define prt_slot_gsiG(nr) prt_slot_gsi(nr, GSIG, GSIH, GSIE, GSIF)
+#define prt_slot_gsiH(nr) prt_slot_gsi(nr, GSIH, GSIE, GSIF, GSIG)
+
+            Name(PRTA, package() {
+                prt_slot_gsiE(0x0000),
+                prt_slot_gsiF(0x0001),
+                prt_slot_gsiG(0x0002),
+                prt_slot_gsiH(0x0003),
+                prt_slot_gsiE(0x0004),
+                prt_slot_gsiF(0x0005),
+                prt_slot_gsiG(0x0006),
+                prt_slot_gsiH(0x0007),
+                prt_slot_gsiE(0x0008),
+                prt_slot_gsiF(0x0009),
+                prt_slot_gsiG(0x000a),
+                prt_slot_gsiH(0x000b),
+                prt_slot_gsiE(0x000c),
+                prt_slot_gsiF(0x000d),
+                prt_slot_gsiG(0x000e),
+                prt_slot_gsiH(0x000f),
+                prt_slot_gsiE(0x0010),
+                prt_slot_gsiF(0x0011),
+                prt_slot_gsiG(0x0012),
+                prt_slot_gsiH(0x0013),
+                prt_slot_gsiE(0x0014),
+                prt_slot_gsiF(0x0015),
+                prt_slot_gsiG(0x0016),
+                prt_slot_gsiH(0x0017),
+                prt_slot_gsiE(0x0018),
+
+                /* INTA -> PIRQA for slot 25 - 31, but 30
+                   see the default value of D<N>IR */
+                prt_slot_gsiA(0x0019),
+                prt_slot_gsiA(0x001a),
+                prt_slot_gsiA(0x001b),
+                prt_slot_gsiA(0x001c),
+                prt_slot_gsiA(0x001d),
+
+                /* PCIe->PCI bridge. use PIRQ[E-H] */
+                prt_slot_gsiE(0x001e),
+
+                prt_slot_gsiA(0x001f)
+            })
+
+            Method(_PRT, 0, NotSerialized) {
+                /* PCI IRQ routing table, example from ACPI 2.0a specification,
+                   section 6.2.8.1 */
+                /* Note: we provide the same info as the PCI routing
+                   table of the Bochs BIOS */
+                If (LEqual(\PICF, Zero)) {
+                    Return (PRTP)
+                } Else {
+                    Return (PRTA)
+                }
+            }
+        }
+
+        Field(PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve) {
+            PRQA,   8,
+            PRQB,   8,
+            PRQC,   8,
+            PRQD,   8,
+
+            Offset(0x08),
+            PRQE,   8,
+            PRQF,   8,
+            PRQG,   8,
+            PRQH,   8
+        }
+
+        Method(IQST, 1, NotSerialized) {
+            // _STA method - get status
+            If (And(0x80, Arg0)) {
+                Return (0x09)
+            }
+            Return (0x0B)
+        }
+        Method(IQCR, 1, NotSerialized) {
+            // _CRS method - get current settings
+            Name(PRR0, ResourceTemplate() {
+                Interrupt(, Level, ActiveHigh, Shared) { 0 }
+            })
+            CreateDWordField(PRR0, 0x05, PRRI)
+            Store(And(Arg0, 0x0F), PRRI)
+            Return (PRR0)
+        }
+
+#define define_link(link, uid, reg)                             \
+        Device(link) {                                          \
+            Name(_HID, EISAID("PNP0C0F"))                       \
+            Name(_UID, uid)                                     \
+            Name(_PRS, ResourceTemplate() {                     \
+                Interrupt(, Level, ActiveHigh, Shared) {        \
+                    5, 10, 11                                   \
+                }                                               \
+            })                                                  \
+            Method(_STA, 0, NotSerialized) {                    \
+                Return (IQST(reg))                              \
+            }                                                   \
+            Method(_DIS, 0, NotSerialized) {                    \
+                Or(reg, 0x80, reg)                              \
+            }                                                   \
+            Method(_CRS, 0, NotSerialized) {                    \
+                Return (IQCR(reg))                              \
+            }                                                   \
+            Method(_SRS, 1, NotSerialized) {                    \
+                CreateDWordField(Arg0, 0x05, PRRI)              \
+                Store(PRRI, reg)                                \
+            }                                                   \
+        }
+
+        define_link(LNKA, 0, PRQA)
+        define_link(LNKB, 1, PRQB)
+        define_link(LNKC, 2, PRQC)
+        define_link(LNKD, 3, PRQD)
+        define_link(LNKE, 4, PRQE)
+        define_link(LNKF, 5, PRQF)
+        define_link(LNKG, 6, PRQG)
+        define_link(LNKH, 7, PRQH)
+
+#define define_gsi_link(link, uid, gsi)                         \
+        Device(link) {                                          \
+            Name(_HID, EISAID("PNP0C0F"))                       \
+            Name(_UID, uid)                                     \
+            Name(_PRS, ResourceTemplate() {                     \
+                Interrupt(, Level, ActiveHigh, Shared) {        \
+                    gsi                                         \
+                }                                               \
+            })                                                  \
+            Name(_CRS, ResourceTemplate() {                     \
+                Interrupt(, Level, ActiveHigh, Shared) {        \
+                    gsi                                         \
+                }                                               \
+            })                                                  \
+            Method(_SRS, 1, NotSerialized) {                    \
+            }                                                   \
+        }
+
+        define_gsi_link(GSIA, 0, 0x10)
+        define_gsi_link(GSIB, 0, 0x11)
+        define_gsi_link(GSIC, 0, 0x12)
+        define_gsi_link(GSID, 0, 0x13)
+        define_gsi_link(GSIE, 0, 0x14)
+        define_gsi_link(GSIF, 0, 0x15)
+        define_gsi_link(GSIG, 0, 0x16)
+        define_gsi_link(GSIH, 0, 0x17)
+    }
+
+#include "acpi-dsdt-cpu-hotplug.dsl"
+
+
+/****************************************************************
+ * General purpose events
+ ****************************************************************/
+
+    Scope(\_GPE) {
+        Name(_HID, "ACPI0006")
+
+        Method(_L00) {
+        }
+        Method(_L01) {
+            // CPU hotplug event
+            \_SB.PRSC()
+        }
+        Method(_L02) {
+        }
+        Method(_L03) {
+        }
+        Method(_L04) {
+        }
+        Method(_L05) {
+        }
+        Method(_L06) {
+        }
+        Method(_L07) {
+        }
+        Method(_L08) {
+        }
+        Method(_L09) {
+        }
+        Method(_L0A) {
+        }
+        Method(_L0B) {
+        }
+        Method(_L0C) {
+        }
+        Method(_L0D) {
+        }
+        Method(_L0E) {
+        }
+        Method(_L0F) {
+        }
+    }
+}
diff --git a/hw/i386/ssdt-misc.dsl b/hw/i386/ssdt-misc.dsl
new file mode 100644
index 0000000..a4484b8
--- /dev/null
+++ b/hw/i386/ssdt-misc.dsl
@@ -0,0 +1,119 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+ACPI_EXTRACT_ALL_CODE ssdp_misc_aml
+
+DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC", "BXSSDTSUSP", 0x1)
+{
+
+/****************************************************************
+ * PCI memory ranges
+ ****************************************************************/
+
+    Scope(\) {
+       ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_start
+       Name(P0S, 0x12345678)
+       ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_end
+       Name(P0E, 0x12345678)
+       ACPI_EXTRACT_NAME_BYTE_CONST acpi_pci64_valid
+       Name(P1V, 0x12)
+       ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_start
+       Name(P1S, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 })
+       ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_end
+       Name(P1E, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 })
+       ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_length
+       Name(P1L, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 })
+    }
+
+
+/****************************************************************
+ * Suspend
+ ****************************************************************/
+
+    Scope(\) {
+    /*
+     * S3 (suspend-to-ram), S4 (suspend-to-disk) and S5 (power-off) type codes:
+     * must match piix4 emulation.
+     */
+
+        ACPI_EXTRACT_NAME_STRING acpi_s3_name
+        Name(_S3, Package(0x04) {
+            One,  /* PM1a_CNT.SLP_TYP */
+            One,  /* PM1b_CNT.SLP_TYP */
+            Zero,  /* reserved */
+            Zero   /* reserved */
+        })
+        ACPI_EXTRACT_NAME_STRING acpi_s4_name
+        ACPI_EXTRACT_PKG_START acpi_s4_pkg
+        Name(_S4, Package(0x04) {
+            0x2,  /* PM1a_CNT.SLP_TYP */
+            0x2,  /* PM1b_CNT.SLP_TYP */
+            Zero,  /* reserved */
+            Zero   /* reserved */
+        })
+        Name(_S5, Package(0x04) {
+            Zero,  /* PM1a_CNT.SLP_TYP */
+            Zero,  /* PM1b_CNT.SLP_TYP */
+            Zero,  /* reserved */
+            Zero   /* reserved */
+        })
+    }
+
+    External(\_SB.PCI0, DeviceObj)
+    External(\_SB.PCI0.ISA, DeviceObj)
+
+    Scope(\_SB.PCI0.ISA) {
+        Device(PEVT) {
+            Name(_HID, "QEMU0001")
+            /* PEST will be patched to be Zero if no such device */
+            ACPI_EXTRACT_NAME_WORD_CONST ssdt_isa_pest
+            Name(PEST, 0xFFFF)
+            OperationRegion(PEOR, SystemIO, PEST, 0x01)
+            Field(PEOR, ByteAcc, NoLock, Preserve) {
+                PEPT,   8,
+            }
+
+            Method(_STA, 0, NotSerialized) {
+                Store(PEST, Local0)
+                If (LEqual(Local0, Zero)) {
+                    Return (0x00)
+                } Else {
+                    Return (0x0F)
+                }
+            }
+
+            Method(RDPT, 0, NotSerialized) {
+                Store(PEPT, Local0)
+                Return (Local0)
+            }
+
+            Method(WRPT, 1, NotSerialized) {
+                Store(Arg0, PEPT)
+            }
+
+            Name(_CRS, ResourceTemplate() {
+                IO(Decode16, 0x00, 0x00, 0x01, 0x01, IO)
+            })
+
+            CreateWordField(_CRS, IO._MIN, IOMN)
+            CreateWordField(_CRS, IO._MAX, IOMX)
+
+            Method(_INI, 0, NotSerialized) {
+                Store(PEST, IOMN)
+                Store(PEST, IOMX)
+            }
+        }
+    }
+}
diff --git a/hw/i386/ssdt-pcihp.dsl b/hw/i386/ssdt-pcihp.dsl
new file mode 100644
index 0000000..d29a5b9
--- /dev/null
+++ b/hw/i386/ssdt-pcihp.dsl
@@ -0,0 +1,51 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+ACPI_EXTRACT_ALL_CODE ssdp_pcihp_aml
+
+DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
+{
+
+/****************************************************************
+ * PCI hotplug
+ ****************************************************************/
+
+    /* Objects supplied by DSDT */
+    External(\_SB.PCI0, DeviceObj)
+    External(\_SB.PCI0.PCEJ, MethodObj)
+
+    Scope(\_SB.PCI0) {
+
+        /* Bulk generated PCI hotplug devices */
+        ACPI_EXTRACT_DEVICE_START ssdt_pcihp_start
+        ACPI_EXTRACT_DEVICE_END ssdt_pcihp_end
+        ACPI_EXTRACT_DEVICE_STRING ssdt_pcihp_name
+
+        // Method _EJ0 can be patched by BIOS to EJ0_
+        // at runtime, if the slot is detected to not support hotplug.
+        // Extract the offset of the address dword and the
+        // _EJ0 name to allow this patching.
+        Device(SAA) {
+            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcihp_id
+            Name(_SUN, 0xAA)
+            ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcihp_adr
+            Name(_ADR, 0xAA0000)
+            ACPI_EXTRACT_METHOD_STRING ssdt_pcihp_ej0
+            Method(_EJ0, 1) {
+                Return (PCEJ(_SUN))
+            }
+        }
+    }
+}
diff --git a/hw/i386/ssdt-proc.dsl b/hw/i386/ssdt-proc.dsl
new file mode 100644
index 0000000..58333c7
--- /dev/null
+++ b/hw/i386/ssdt-proc.dsl
@@ -0,0 +1,63 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This file is the basis for the ssdt table generated in src/acpi.c.
+ * It defines the contents of the per-cpu Processor() object.  At
+ * runtime, a dynamically generated SSDT will contain one copy of this
+ * AML snippet for every possible cpu in the system.  The objects will
+ * be placed in the \_SB_ namespace.
+ *
+ * In addition to the aml code generated from this file, the
+ * src/acpi.c file creates a NTFY method with an entry for each cpu:
+ *     Method(NTFY, 2) {
+ *         If (LEqual(Arg0, 0x00)) { Notify(CP00, Arg1) }
+ *         If (LEqual(Arg0, 0x01)) { Notify(CP01, Arg1) }
+ *         ...
+ *     }
+ * and a CPON array with the list of active and inactive cpus:
+ *     Name(CPON, Package() { One, One, ..., Zero, Zero, ... })
+ */
+
+ACPI_EXTRACT_ALL_CODE ssdp_proc_aml
+
+DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1)
+{
+    ACPI_EXTRACT_PROCESSOR_START ssdt_proc_start
+    ACPI_EXTRACT_PROCESSOR_END ssdt_proc_end
+    ACPI_EXTRACT_PROCESSOR_STRING ssdt_proc_name
+    Processor(CPAA, 0xAA, 0x0000b010, 0x06) {
+        ACPI_EXTRACT_NAME_BYTE_CONST ssdt_proc_id
+        Name(ID, 0xAA)
+/*
+ * The src/acpi.c code requires the above ACP_EXTRACT tags so that it can update
+ * CPAA and 0xAA with the appropriate CPU id (see
+ * SD_OFFSET_CPUHEX/CPUID1/CPUID2).  Don't change the above without
+ * also updating the C code.
+ */
+        Name(_HID, "ACPI0007")
+        External(CPMA, MethodObj)
+        External(CPST, MethodObj)
+        External(CPEJ, MethodObj)
+        Method(_MAT, 0) {
+            Return (CPMA(ID))
+        }
+        Method(_STA, 0) {
+            Return (CPST(ID))
+        }
+        Method(_EJ0, 1, NotSerialized) {
+            CPEJ(ID, Arg0)
+        }
+    }
+}
diff --git a/scripts/acpi_extract.py b/scripts/acpi_extract.py
new file mode 100755
index 0000000..22ea468
--- /dev/null
+++ b/scripts/acpi_extract.py
@@ -0,0 +1,362 @@
+#!/usr/bin/python
+# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@redhat.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, see <http://www.gnu.org/licenses/>.
+
+# Process mixed ASL/AML listing (.lst file) produced by iasl -l
+# Locate and execute ACPI_EXTRACT directives, output offset info
+#
+# Documentation of ACPI_EXTRACT_* directive tags:
+#
+# These directive tags output offset information from AML for BIOS runtime
+# table generation.
+# Each directive is of the form:
+# ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...)
+# and causes the extractor to create an array
+# named <array_name> with offset, in the generated AML,
+# of an object of a given type in the following <Operator>.
+#
+# A directive must fit on a single code line.
+#
+# Object type in AML is verified, a mismatch causes a build failure.
+#
+# Directives and operators currently supported are:
+# ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object from Name()
+# ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object from Name()
+# ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from Name()
+# ACPI_EXTRACT_METHOD_STRING - extract a NameString from Method()
+# ACPI_EXTRACT_NAME_STRING - extract a NameString from Name()
+# ACPI_EXTRACT_PROCESSOR_START - start of Processor() block
+# ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from Processor()
+# ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1
+# ACPI_EXTRACT_PKG_START - start of Package block
+#
+# ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML bytecode
+#
+# ACPI_EXTRACT is not allowed anywhere else in code, except in comments.
+
+import re;
+import sys;
+import fileinput;
+
+aml = []
+asl = []
+output = {}
+debug = ""
+
+class asl_line:
+    line = None
+    lineno = None
+    aml_offset = None
+
+def die(diag):
+    sys.stderr.write("Error: %s; %s\n" % (diag, debug))
+    sys.exit(1)
+
+#Store an ASL command, matching AML offset, and input line (for debugging)
+def add_asl(lineno, line):
+    l = asl_line()
+    l.line = line
+    l.lineno = lineno
+    l.aml_offset = len(aml)
+    asl.append(l)
+
+#Store an AML byte sequence
+#Verify that offset output by iasl matches # of bytes so far
+def add_aml(offset, line):
+    o = int(offset, 16);
+    # Sanity check: offset must match size of code so far
+    if (o != len(aml)):
+        die("Offset 0x%x != 0x%x" % (o, len(aml)))
+    # Strip any trailing dots and ASCII dump after "
+    line = re.sub(r'\s*\.*\s*".*$',"", line)
+    # Strip traling whitespace
+    line = re.sub(r'\s+$',"", line)
+    # Strip leading whitespace
+    line = re.sub(r'^\s+',"", line)
+    # Split on whitespace
+    code = re.split(r'\s+', line)
+    for c in code:
+        # Require a legal hex number, two digits
+        if (not(re.search(r'^[0-9A-Fa-f][0-9A-Fa-f]$', c))):
+            die("Unexpected octet %s" % c);
+        aml.append(int(c, 16));
+
+# Process aml bytecode array, decoding AML
+def aml_pkglen_bytes(offset):
+    # PkgLength can be multibyte. Bits 8-7 give the # of extra bytes.
+    pkglenbytes = aml[offset] >> 6;
+    return pkglenbytes + 1
+
+def aml_pkglen(offset):
+    pkgstart = offset
+    pkglenbytes = aml_pkglen_bytes(offset)
+    pkglen = aml[offset] & 0x3F
+    # If multibyte, first nibble only uses bits 0-3
+    if ((pkglenbytes > 1) and (pkglen & 0x30)):
+        die("PkgLen bytes 0x%x but first nibble 0x%x expected 0x0X" %
+            (pkglen, pkglen))
+    offset += 1
+    pkglenbytes -= 1
+    for i in range(pkglenbytes):
+        pkglen |= aml[offset + i] << (i * 8 + 4)
+    if (len(aml) < pkgstart + pkglen):
+        die("PckgLen 0x%x at offset 0x%x exceeds AML size 0x%x" %
+            (pkglen, offset, len(aml)))
+    return pkglen
+
+# Given method offset, find its NameString offset
+def aml_method_string(offset):
+    #0x14 MethodOp PkgLength NameString MethodFlags TermList
+    if (aml[offset] != 0x14):
+        die( "Method offset 0x%x: expected 0x14 actual 0x%x" %
+             (offset, aml[offset]));
+    offset += 1;
+    pkglenbytes = aml_pkglen_bytes(offset)
+    offset += pkglenbytes;
+    return offset;
+
+# Given name offset, find its NameString offset
+def aml_name_string(offset):
+    #0x08 NameOp NameString DataRef
+    if (aml[offset] != 0x08):
+        die( "Name offset 0x%x: expected 0x08 actual 0x%x" %
+             (offset, aml[offset]));
+    offset += 1
+    # Block Name Modifier. Skip it.
+    if (aml[offset] == 0x5c or aml[offset] == 0x5e):
+        offset += 1
+    return offset;
+
+# Given data offset, find 8 byte buffer offset
+def aml_data_buffer8(offset):
+    #0x08 NameOp NameString DataRef
+    expect = [0x11, 0x0B, 0x0A, 0x08]
+    if (aml[offset:offset+4] != expect):
+        die( "Name offset 0x%x: expected %s actual %s" %
+             (offset, aml[offset:offset+4], expect))
+    return offset + len(expect)
+
+# Given data offset, find dword const offset
+def aml_data_dword_const(offset):
+    #0x08 NameOp NameString DataRef
+    if (aml[offset] != 0x0C):
+        die( "Name offset 0x%x: expected 0x0C actual 0x%x" %
+             (offset, aml[offset]));
+    return offset + 1;
+
+# Given data offset, find word const offset
+def aml_data_word_const(offset):
+    #0x08 NameOp NameString DataRef
+    if (aml[offset] != 0x0B):
+        die( "Name offset 0x%x: expected 0x0B actual 0x%x" %
+             (offset, aml[offset]));
+    return offset + 1;
+
+# Given data offset, find byte const offset
+def aml_data_byte_const(offset):
+    #0x08 NameOp NameString DataRef
+    if (aml[offset] != 0x0A):
+        die( "Name offset 0x%x: expected 0x0A actual 0x%x" %
+             (offset, aml[offset]));
+    return offset + 1;
+
+# Find name'd buffer8
+def aml_name_buffer8(offset):
+    return aml_data_buffer8(aml_name_string(offset) + 4)
+
+# Given name offset, find dword const offset
+def aml_name_dword_const(offset):
+    return aml_data_dword_const(aml_name_string(offset) + 4)
+
+# Given name offset, find word const offset
+def aml_name_word_const(offset):
+    return aml_data_word_const(aml_name_string(offset) + 4)
+
+# Given name offset, find byte const offset
+def aml_name_byte_const(offset):
+    return aml_data_byte_const(aml_name_string(offset) + 4)
+
+def aml_device_start(offset):
+    #0x5B 0x82 DeviceOp PkgLength NameString
+    if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x82)):
+        die( "Name offset 0x%x: expected 0x5B 0x82 actual 0x%x 0x%x" %
+             (offset, aml[offset], aml[offset + 1]));
+    return offset
+
+def aml_device_string(offset):
+    #0x5B 0x82 DeviceOp PkgLength NameString
+    start = aml_device_start(offset)
+    offset += 2
+    pkglenbytes = aml_pkglen_bytes(offset)
+    offset += pkglenbytes
+    return offset
+
+def aml_device_end(offset):
+    start = aml_device_start(offset)
+    offset += 2
+    pkglenbytes = aml_pkglen_bytes(offset)
+    pkglen = aml_pkglen(offset)
+    return offset + pkglen
+
+def aml_processor_start(offset):
+    #0x5B 0x83 ProcessorOp PkgLength NameString ProcID
+    if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x83)):
+        die( "Name offset 0x%x: expected 0x5B 0x83 actual 0x%x 0x%x" %
+             (offset, aml[offset], aml[offset + 1]));
+    return offset
+
+def aml_processor_string(offset):
+    #0x5B 0x83 ProcessorOp PkgLength NameString ProcID
+    start = aml_processor_start(offset)
+    offset += 2
+    pkglenbytes = aml_pkglen_bytes(offset)
+    offset += pkglenbytes
+    return offset
+
+def aml_processor_end(offset):
+    start = aml_processor_start(offset)
+    offset += 2
+    pkglenbytes = aml_pkglen_bytes(offset)
+    pkglen = aml_pkglen(offset)
+    return offset + pkglen
+
+def aml_package_start(offset):
+    offset = aml_name_string(offset) + 4
+    # 0x12 PkgLength NumElements PackageElementList
+    if (aml[offset] != 0x12):
+        die( "Name offset 0x%x: expected 0x12 actual 0x%x" %
+             (offset, aml[offset]));
+    offset += 1
+    return offset + aml_pkglen_bytes(offset) + 1
+
+lineno = 0
+for line in fileinput.input():
+    # Strip trailing newline
+    line = line.rstrip();
+    # line number and debug string to output in case of errors
+    lineno = lineno + 1
+    debug = "input line %d: %s" % (lineno, line)
+    #ASL listing: space, then line#, then ...., then code
+    pasl = re.compile('^\s+([0-9]+)(:\s\s|\.\.\.\.)\s*')
+    m = pasl.search(line)
+    if (m):
+        add_asl(lineno, pasl.sub("", line));
+    # AML listing: offset in hex, then ...., then code
+    paml = re.compile('^([0-9A-Fa-f]+)(:\s\s|\.\.\.\.)\s*')
+    m = paml.search(line)
+    if (m):
+        add_aml(m.group(1), paml.sub("", line))
+
+# Now go over code
+# Track AML offset of a previous non-empty ASL command
+prev_aml_offset = -1
+for i in range(len(asl)):
+    debug = "input line %d: %s" % (asl[i].lineno, asl[i].line)
+
+    l = asl[i].line
+
+    # skip if not an extract directive
+    a = len(re.findall(r'ACPI_EXTRACT', l))
+    if (not a):
+        # If not empty, store AML offset. Will be used for sanity checks
+        # IASL seems to put {}. at random places in the listing.
+        # Ignore any non-words for the purpose of this test.
+        m = re.search(r'\w+', l)
+        if (m):
+                prev_aml_offset = asl[i].aml_offset
+        continue
+
+    if (a > 1):
+        die("Expected at most one ACPI_EXTRACT per line, actual %d" % a)
+
+    mext = re.search(r'''
+                      ^\s* # leading whitespace
+                      /\*\s* # start C comment
+                      (ACPI_EXTRACT_\w+) # directive: group(1)
+                      \s+ # whitspace separates directive from array name
+                      (\w+) # array name: group(2)
+                      \s*\*/ # end of C comment
+                      \s*$ # trailing whitespace
+                      ''', l, re.VERBOSE)
+    if (not mext):
+        die("Stray ACPI_EXTRACT in input")
+
+    # previous command must have produced some AML,
+    # otherwise we are in a middle of a block
+    if (prev_aml_offset == asl[i].aml_offset):
+        die("ACPI_EXTRACT directive in the middle of a block")
+
+    directive = mext.group(1)
+    array = mext.group(2)
+    offset = asl[i].aml_offset
+
+    if (directive == "ACPI_EXTRACT_ALL_CODE"):
+        if array in output:
+            die("%s directive used more than once" % directive)
+        output[array] = aml
+        continue
+    if (directive == "ACPI_EXTRACT_NAME_BUFFER8"):
+        offset = aml_name_buffer8(offset)
+    elif (directive == "ACPI_EXTRACT_NAME_DWORD_CONST"):
+        offset = aml_name_dword_const(offset)
+    elif (directive == "ACPI_EXTRACT_NAME_WORD_CONST"):
+        offset = aml_name_word_const(offset)
+    elif (directive == "ACPI_EXTRACT_NAME_BYTE_CONST"):
+        offset = aml_name_byte_const(offset)
+    elif (directive == "ACPI_EXTRACT_NAME_STRING"):
+        offset = aml_name_string(offset)
+    elif (directive == "ACPI_EXTRACT_METHOD_STRING"):
+        offset = aml_method_string(offset)
+    elif (directive == "ACPI_EXTRACT_DEVICE_START"):
+        offset = aml_device_start(offset)
+    elif (directive == "ACPI_EXTRACT_DEVICE_STRING"):
+        offset = aml_device_string(offset)
+    elif (directive == "ACPI_EXTRACT_DEVICE_END"):
+        offset = aml_device_end(offset)
+    elif (directive == "ACPI_EXTRACT_PROCESSOR_START"):
+        offset = aml_processor_start(offset)
+    elif (directive == "ACPI_EXTRACT_PROCESSOR_STRING"):
+        offset = aml_processor_string(offset)
+    elif (directive == "ACPI_EXTRACT_PROCESSOR_END"):
+        offset = aml_processor_end(offset)
+    elif (directive == "ACPI_EXTRACT_PKG_START"):
+        offset = aml_package_start(offset)
+    else:
+        die("Unsupported directive %s" % directive)
+
+    if array not in output:
+        output[array] = []
+    output[array].append(offset)
+
+debug = "at end of file"
+
+def get_value_type(maxvalue):
+    #Use type large enough to fit the table
+    if (maxvalue >= 0x10000):
+            return "int"
+    elif (maxvalue >= 0x100):
+            return "short"
+    else:
+            return "char"
+
+# Pretty print output
+for array in output.keys():
+    otype = get_value_type(max(output[array]))
+    odata = []
+    for value in output[array]:
+        odata.append("0x%x" % value)
+    sys.stdout.write("static unsigned %s %s[] = {\n" % (otype, array))
+    sys.stdout.write(",\n".join(odata))
+    sys.stdout.write('\n};\n');
diff --git a/scripts/acpi_extract_preprocess.py b/scripts/acpi_extract_preprocess.py
new file mode 100755
index 0000000..69d10d6
--- /dev/null
+++ b/scripts/acpi_extract_preprocess.py
@@ -0,0 +1,51 @@
+#!/usr/bin/python
+# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@redhat.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, see <http://www.gnu.org/licenses/>.
+
+# Read a preprocessed ASL listing and put each ACPI_EXTRACT
+# directive in a comment, to make iasl skip it.
+# We also put each directive on a new line, the machinery
+# in tools/acpi_extract.py requires this.
+
+import re;
+import sys;
+import fileinput;
+
+def die(diag):
+    sys.stderr.write("Error: %s\n" % (diag))
+    sys.exit(1)
+
+# Note: () around pattern make split return matched string as part of list
+psplit = re.compile(r''' (
+                          \b # At word boundary
+                          ACPI_EXTRACT_\w+ # directive
+                          \s+ # some whitespace
+                          \w+ # array name
+                         )''', re.VERBOSE);
+
+lineno = 0
+for line in fileinput.input():
+    # line number and debug string to output in case of errors
+    lineno = lineno + 1
+    debug = "input line %d: %s" % (lineno, line.rstrip())
+
+    s = psplit.split(line);
+    # The way split works, each odd item is the matching ACPI_EXTRACT directive.
+    # Put each in a comment, and on a line by itself.
+    for i in range(len(s)):
+        if (i % 2):
+            sys.stdout.write("\n/* %s */\n" % s[i])
+        else:
+            sys.stdout.write(s[i])