Merge remote-tracking branch 'stefanha/trivial-patches' into staging

* stefanha/trivial-patches:
  qemu-nbd: drop loop which can never loop
  Make python mandatory
  net/socket.c: Fix fd leak in net_socket_listen_init() error paths
  gdbstub: Fix fd leak in gdbserver_open() error path
  configure: Fix test for supported host CPU type
  configure: CONFIG_QEMU_INTERP_PREFIX only for user mode
  scsi virtio-blk usb-msd: Clean up device init error messages
  Strip trailing '\n' from error_report()'s first argument (again)
  qemu-options.hx: fix tls-channel help text

11 files changed, 51 insertions, 55 deletions

diff --git a/configure b/configure
index c136f12..0309dad 100755
--- a/configure
+++ b/configure
@@ -300,8 +300,11 @@ else
   cpu=`uname -m`
 fi
 
+ARCH=
+# Normalise host CPU name and set ARCH.
+# Note that this case should only have supported host CPUs, not guests.
 case "$cpu" in
-  alpha|cris|ia64|lm32|m68k|microblaze|ppc|ppc64|sparc64|unicore32)
+  ia64|ppc|ppc64|s390|s390x|sparc64)
     cpu="$cpu"
   ;;
   i386|i486|i586|i686|i86pc|BePC)
@@ -319,20 +322,17 @@ case "$cpu" in
   mips*)
     cpu="mips"
   ;;
-  s390)
-    cpu="s390"
-  ;;
-  s390x)
-    cpu="s390x"
-  ;;
   sparc|sun4[cdmuv])
     cpu="sparc"
   ;;
   *)
-    echo "Unsupported CPU = $cpu"
-    exit 1
+    # This will result in either an error or falling back to TCI later
+    ARCH=unknown
   ;;
 esac
+if test -z "$ARCH"; then
+  ARCH="$cpu"
+fi
 
 # OS specific
 if check_define __linux__ ; then
@@ -1080,6 +1080,18 @@ echo "NOTE: The object files are built at the place where configure is launched"
 exit 1
 fi
 
+# Now we have handled --enable-tcg-interpreter and know we're not just
+# printing the help message, bail out if the host CPU isn't supported.
+if test "$ARCH" = "unknown"; then
+    if test "$tcg_interpreter" = "yes" ; then
+        echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
+        ARCH=tci
+    else
+        echo "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
+        exit 1
+    fi
+fi
+
 # check that the C compiler works.
 cat > $TMPC <<EOF
 int main(void) { return 0; }
@@ -1185,13 +1197,9 @@ if test "$solaris" = "yes" ; then
   fi
 fi
 
-if test "$guest_agent" != "no" ; then
-  if has $python; then
-    :
-  else
-    echo "Python not found. Use --python=/path/to/python"
-    exit 1
-  fi
+if ! has $python; then
+  echo "Python not found. Use --python=/path/to/python"
+  exit 1
 fi
 
 if test -z "$target_list" ; then
@@ -2922,20 +2930,6 @@ echo "sysconfdir=$sysconfdir" >> $config_host_mak
 echo "docdir=$docdir" >> $config_host_mak
 echo "confdir=$confdir" >> $config_host_mak
 
-case "$cpu" in
-  i386|x86_64|alpha|arm|cris|hppa|ia64|lm32|m68k|microblaze|mips|mips64|ppc|ppc64|s390|s390x|sparc|sparc64|unicore32)
-    ARCH=$cpu
-  ;;
-  *)
-    if test "$tcg_interpreter" = "yes" ; then
-        echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
-        ARCH=tci
-    else
-        echo "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
-        exit 1
-    fi
-  ;;
-esac
 echo "ARCH=$ARCH" >> $config_host_mak
 if test "$debug_tcg" = "yes" ; then
   echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
@@ -3414,7 +3408,6 @@ echo "# Automatically generated by configure - do not modify" > $config_target_m
 bflt="no"
 target_nptl="no"
 interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
-echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
 gdb_xml_files=""
 target_short_alignment=2
 target_int_alignment=4
@@ -3620,6 +3613,7 @@ if test "$target_softmmu" = "yes" ; then
 fi
 if test "$target_user_only" = "yes" ; then
   echo "CONFIG_USER_ONLY=y" >> $config_target_mak
+  echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
 fi
 if test "$target_linux_user" = "yes" ; then
   echo "CONFIG_LINUX_USER=y" >> $config_target_mak
diff --git a/gdbstub.c b/gdbstub.c
index a5806ef..7d470b6 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -2762,11 +2762,13 @@ static int gdbserver_open(int port)
     ret = bind(fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
     if (ret < 0) {
         perror("bind");
+        close(fd);
         return -1;
     }
     ret = listen(fd, 0);
     if (ret < 0) {
         perror("listen");
+        close(fd);
         return -1;
     }
     return fd;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 505accd..5d8bf53 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1515,7 +1515,7 @@ static int scsi_initfn(SCSIDevice *dev)
     DriveInfo *dinfo;
 
     if (!s->qdev.conf.bs) {
-        error_report("scsi-disk: drive property not set");
+        error_report("drive property not set");
         return -1;
     }
 
@@ -1537,7 +1537,7 @@ static int scsi_initfn(SCSIDevice *dev)
     }
 
     if (bdrv_is_sg(s->qdev.conf.bs)) {
-        error_report("scsi-disk: unwanted /dev/sg*");
+        error_report("unwanted /dev/sg*");
         return -1;
     }
 
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 6f7d3db..0aebcddf 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -374,13 +374,13 @@ static int scsi_generic_initfn(SCSIDevice *s)
     struct sg_scsi_id scsiid;
 
     if (!s->conf.bs) {
-        error_report("scsi-generic: drive property not set");
+        error_report("drive property not set");
         return -1;
     }
 
     /* check we are really using a /dev/sg* file */
     if (!bdrv_is_sg(s->conf.bs)) {
-        error_report("scsi-generic: not /dev/sg*");
+        error_report("not /dev/sg*");
         return -1;
     }
 
@@ -396,13 +396,13 @@ static int scsi_generic_initfn(SCSIDevice *s)
     /* check we are using a driver managing SG_IO (version 3 and after */
     if (bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
         sg_version < 30000) {
-        error_report("scsi-generic: scsi generic interface too old");
+        error_report("scsi generic interface too old");
         return -1;
     }
 
     /* get LUN of the /dev/sg? */
     if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
-        error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed");
+        error_report("SG_GET_SCSI_ID ioctl failed");
         return -1;
     }
 
diff --git a/hw/usb-bus.c b/hw/usb-bus.c
index 8203390..bd4afa7 100644
--- a/hw/usb-bus.c
+++ b/hw/usb-bus.c
@@ -137,7 +137,7 @@ USBDevice *usb_create(USBBus *bus, const char *name)
         bus = usb_bus_find(-1);
         if (!bus)
             return NULL;
-        error_report("%s: no bus specified, using \"%s\" for \"%s\"\n",
+        error_report("%s: no bus specified, using \"%s\" for \"%s\"",
                 __FUNCTION__, bus->qbus.name, name);
     }
 #endif
@@ -152,12 +152,12 @@ USBDevice *usb_create_simple(USBBus *bus, const char *name)
     int rc;
 
     if (!dev) {
-        error_report("Failed to create USB device '%s'\n", name);
+        error_report("Failed to create USB device '%s'", name);
         return NULL;
     }
     rc = qdev_init(&dev->qdev);
     if (rc < 0) {
-        error_report("Failed to initialize USB device '%s'\n", name);
+        error_report("Failed to initialize USB device '%s'", name);
         return NULL;
     }
     return dev;
@@ -244,7 +244,7 @@ int usb_claim_port(USBDevice *dev)
             }
         }
         if (port == NULL) {
-            error_report("Error: usb port %s (bus %s) not found (in use?)\n",
+            error_report("Error: usb port %s (bus %s) not found (in use?)",
                          dev->port_path, bus->qbus.name);
             return -1;
         }
@@ -255,7 +255,7 @@ int usb_claim_port(USBDevice *dev)
         }
         if (bus->nfree == 0) {
             error_report("Error: tried to attach usb device %s to a bus "
-                         "with no free ports\n", dev->product_desc);
+                         "with no free ports", dev->product_desc);
             return -1;
         }
         port = QTAILQ_FIRST(&bus->free);
@@ -302,7 +302,7 @@ int usb_device_attach(USBDevice *dev)
 
     if (!(port->speedmask & dev->speedmask)) {
         error_report("Warning: speed mismatch trying to attach "
-                     "usb device %s to bus %s\n",
+                     "usb device %s to bus %s",
                      dev->product_desc, bus->qbus.name);
         return -1;
     }
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 3147131..e427296 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -529,7 +529,7 @@ static int usb_msd_initfn(USBDevice *dev)
     DriveInfo *dinfo;
 
     if (!bs) {
-        error_report("usb-msd: drive property not set");
+        error_report("drive property not set");
         return -1;
     }
 
diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index ef27421..5e81f53 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -569,7 +569,7 @@ VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf,
     DriveInfo *dinfo;
 
     if (!conf->bs) {
-        error_report("virtio-blk-pci: drive property not set");
+        error_report("drive property not set");
         return NULL;
     }
     if (!bdrv_is_inserted(conf->bs)) {
diff --git a/net/socket.c b/net/socket.c
index aaf9be4..c9d70d3 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -427,12 +427,14 @@ static int net_socket_listen_init(VLANState *vlan,
     if (ret < 0) {
         perror("bind");
         g_free(s);
+        closesocket(fd);
         return -1;
     }
     ret = listen(fd, 0);
     if (ret < 0) {
         perror("listen");
         g_free(s);
+        closesocket(fd);
         return -1;
     }
     s->vlan = vlan;
diff --git a/qemu-nbd.c b/qemu-nbd.c
index 155b058..eb61c33 100644
--- a/qemu-nbd.c
+++ b/qemu-nbd.c
@@ -202,12 +202,10 @@ static void *nbd_client_thread(void *arg)
     int ret;
     pthread_t show_parts_thread;
 
-    do {
-        sock = unix_socket_outgoing(sockpath);
-        if (sock == -1) {
-            goto out;
-        }
-    } while (sock == -1);
+    sock = unix_socket_outgoing(sockpath);
+    if (sock == -1) {
+        goto out;
+    }
 
     ret = nbd_receive_negotiate(sock, NULL, &nbdflags,
                                 &size, &blocksize);
diff --git a/qemu-options.hx b/qemu-options.hx
index b38e672..7903e5c 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -871,8 +871,8 @@ The x509 file names can also be configured individually.
 @item tls-ciphers=<list>
 Specify which ciphers to use.
 
-@item tls-channel=[main|display|inputs|record|playback|tunnel]
-@item plaintext-channel=[main|display|inputs|record|playback|tunnel]
+@item tls-channel=[main|display|cursor|inputs|record|playback]
+@item plaintext-channel=[main|display|cursor|inputs|record|playback]
 Force specific channel to be used with or without TLS encryption.  The
 options can be specified multiple times to configure multiple
 channels.  The special name "default" can be used to set the default
diff --git a/usb-redir.c b/usb-redir.c
index a36f2a7..2b53cf3 100644
--- a/usb-redir.c
+++ b/usb-redir.c
@@ -174,7 +174,7 @@ static void usbredir_log(void *priv, int level, const char *msg)
         return;
     }
 
-    error_report("%s\n", msg);
+    error_report("%s", msg);
 }
 
 static void usbredir_log_data(USBRedirDevice *dev, const char *desc,
@@ -193,7 +193,7 @@ static void usbredir_log_data(USBRedirDevice *dev, const char *desc,
         for (j = 0; j < 8 && i + j < len; j++) {
             n += sprintf(buf + n, " %02X", data[i + j]);
         }
-        error_report("%s\n", buf);
+        error_report("%s", buf);
     }
 }