aboutsummaryrefslogtreecommitdiff
path: root/libgloss/sparc/sparcl-stub.c
diff options
context:
space:
mode:
Diffstat (limited to 'libgloss/sparc/sparcl-stub.c')
-rw-r--r--libgloss/sparc/sparcl-stub.c1005
1 files changed, 0 insertions, 1005 deletions
diff --git a/libgloss/sparc/sparcl-stub.c b/libgloss/sparc/sparcl-stub.c
deleted file mode 100644
index 634878b..0000000
--- a/libgloss/sparc/sparcl-stub.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/****************************************************************************
-
- THIS SOFTWARE IS NOT COPYRIGHTED
-
- HP offers the following for use in the public domain. HP makes no
- warranty with regard to the software or it's performance and the
- user accepts the software "AS IS" with all faults.
-
- HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
- TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
- *
- * Module name: remcom.c $
- * Revision: 1.34 $
- * Date: 91/03/09 12:29:49 $
- * Contributor: Lake Stevens Instrument Division$
- *
- * Description: low level support for gdb debugger. $
- *
- * Considerations: only works on target hardware $
- *
- * Written by: Glenn Engel $
- * ModuleState: Experimental $
- *
- * NOTES: See Below $
- *
- * Modified for SPARC by Stu Grossman, Cygnus Support.
- * Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware
- * breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support.
- *
- * This code has been extensively tested on the Fujitsu SPARClite demo board.
- *
- * To enable debugger support, two things need to happen. One, a
- * call to set_debug_traps() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * Two, a breakpoint needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint(). Breakpoint()
- * simulates a breakpoint by executing a trap #1.
- *
- *************
- *
- * The following gdb commands are supported:
- *
- * command function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- *
- * k kill
- *
- * ? What was the last sigval ? SNN (signal NN)
- *
- * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
- * baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum. A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer. '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host: Reply:
- * $m0,10#2a +$00010203040506070809101112131415#42
- *
- ****************************************************************************/
-
-#include <string.h>
-#include <signal.h>
-#include "asm.h"
-
-/************************************************************************
- *
- * external low-level support routines
- */
-extern putDebugChar(); /* write a single character */
-extern getDebugChar(); /* read and return a single char */
-
-/* Pointer to hook for outbyte, set by stub's exception handler. */
-extern void (*__outbyte_hook)();
-
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-#define BUFMAX 2048
-
-static int initialized = 0; /* !0 means we've been initialized */
-
-extern void breakinst();
-static void hw_breakpoint();
-static void set_mem_fault_trap();
-static void get_in_break_mode();
-
-static const char hexchars[]="0123456789abcdef";
-
-#define NUMREGS 80
-
-/* Number of bytes of registers. */
-#define NUMREGBYTES (NUMREGS * 4)
-enum regnames {G0, G1, G2, G3, G4, G5, G6, G7,
- O0, O1, O2, O3, O4, O5, SP, O7,
- L0, L1, L2, L3, L4, L5, L6, L7,
- I0, I1, I2, I3, I4, I5, FP, I7,
-
- F0, F1, F2, F3, F4, F5, F6, F7,
- F8, F9, F10, F11, F12, F13, F14, F15,
- F16, F17, F18, F19, F20, F21, F22, F23,
- F24, F25, F26, F27, F28, F29, F30, F31,
- Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR,
- DIA1, DIA2, DDA1, DDA2, DDV1, DDV2, DCR, DSR };
-
-/*************************** ASSEMBLY CODE MACROS *************************/
-/* */
-
-extern void trap_low();
-
-asm("
- .reserve trapstack, 1000 * 4, \"bss\", 8
-
- .data
- .align 4
-
-in_trap_handler:
- .word 0
-
- .text
- .align 4
-
-! This function is called when any SPARC trap (except window overflow or
-! underflow) occurs. It makes sure that the invalid register window is still
-! available before jumping into C code. It will also restore the world if you
-! return from handle_exception.
-
- .globl " STRINGSYM(trap_low) "
-" STRINGSYM(trap_low) ":
- mov %psr, %l0
- mov %wim, %l3
-
- srl %l3, %l0, %l4 ! wim >> cwp
- cmp %l4, 1
- bne window_fine ! Branch if not in the invalid window
- nop
-
-! Handle window overflow
-
- mov %g1, %l4 ! Save g1, we use it to hold the wim
- srl %l3, 1, %g1 ! Rotate wim right
- tst %g1
- bg good_wim ! Branch if new wim is non-zero
- nop
-
-! At this point, we need to bring a 1 into the high order bit of the wim.
-! Since we don't want to make any assumptions about the number of register
-! windows, we figure it out dynamically so as to setup the wim correctly.
-
- not %g1 ! Fill g1 with ones
- mov %g1, %wim ! Fill the wim with ones
- nop
- nop
- nop
- mov %wim, %g1 ! Read back the wim
- inc %g1 ! Now g1 has 1 just to left of wim
- srl %g1, 1, %g1 ! Now put 1 at top of wim
- mov %g0, %wim ! Clear wim so that subsequent save
- nop ! won't trap
- nop
- nop
-
-good_wim:
- save %g0, %g0, %g0 ! Slip into next window
- mov %g1, %wim ! Install the new wim
-
- std %l0, [%sp + 0 * 4] ! save L & I registers
- std %l2, [%sp + 2 * 4]
- std %l4, [%sp + 4 * 4]
- std %l6, [%sp + 6 * 4]
-
- std %i0, [%sp + 8 * 4]
- std %i2, [%sp + 10 * 4]
- std %i4, [%sp + 12 * 4]
- std %i6, [%sp + 14 * 4]
-
- restore ! Go back to trap window.
- mov %l4, %g1 ! Restore %g1
-
-window_fine:
- sethi %hi(in_trap_handler), %l4
- ld [%lo(in_trap_handler) + %l4], %l5
- tst %l5
- bg recursive_trap
- inc %l5
-
- set trapstack+1000*4, %sp ! Switch to trap stack
-
-recursive_trap:
- st %l5, [%lo(in_trap_handler) + %l4]
- sub %sp,(16+1+6+1+80)*4,%sp ! Make room for input & locals
- ! + hidden arg + arg spill
- ! + doubleword alignment
- ! + registers[72] local var
-
- std %g0, [%sp + (24 + 0) * 4] ! registers[Gx]
- std %g2, [%sp + (24 + 2) * 4]
- std %g4, [%sp + (24 + 4) * 4]
- std %g6, [%sp + (24 + 6) * 4]
-
- std %i0, [%sp + (24 + 8) * 4] ! registers[Ox]
- std %i2, [%sp + (24 + 10) * 4]
- std %i4, [%sp + (24 + 12) * 4]
- std %i6, [%sp + (24 + 14) * 4]
- ! F0->F31 not implemented
- mov %y, %l4
- mov %tbr, %l5
- st %l4, [%sp + (24 + 64) * 4] ! Y
- st %l0, [%sp + (24 + 65) * 4] ! PSR
- st %l3, [%sp + (24 + 66) * 4] ! WIM
- st %l5, [%sp + (24 + 67) * 4] ! TBR
- st %l1, [%sp + (24 + 68) * 4] ! PC
- st %l2, [%sp + (24 + 69) * 4] ! NPC
- ! CPSR and FPSR not impl
- or %l0, 0xf20, %l4
- mov %l4, %psr ! Turn on traps, disable interrupts
- nop
- nop
- nop
- call " STRINGSYM(get_in_break_mode) "
- nop
- nop
- nop
-
- sethi %hi(0xff00), %l5
- or %l5, %lo(0xff00), %l5
-
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 72) * 4] ! DIA1, debug instr addr 1
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 73) * 4] ! DIA2, debug instr addr 2
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 74) * 4] ! DDA1, debug data addr 1
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 75) * 4] ! DDA2, debug data addr 2
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 76) * 4] ! DDV1, debug data val 1
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 77) * 4] ! DDV2, debug data val 2
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 78) * 4] ! DCR, debug control reg
- add %l5, 4, %l5
- lda [%l5]0x1, %l4
- st %l4, [%sp + (24 + 79) * 4] ! DSR, debug status reg
- nop
- nop
- or %l0, 0xf20, %l4
- mov %l4, %psr ! Turn on traps, disable interrupts
- nop
- nop
- nop
- call " STRINGSYM(handle_exception) "
- add %sp, 24 * 4, %o0 ! Pass address of registers
-
-! Reload all of the registers that aren't on the stack
-
- ld [%sp + (24 + 1) * 4], %g1 ! registers[Gx]
- ldd [%sp + (24 + 2) * 4], %g2
- ldd [%sp + (24 + 4) * 4], %g4
- ldd [%sp + (24 + 6) * 4], %g6
-
- ldd [%sp + (24 + 8) * 4], %i0 ! registers[Ox]
- ldd [%sp + (24 + 10) * 4], %i2
- ldd [%sp + (24 + 12) * 4], %i4
- ldd [%sp + (24 + 14) * 4], %i6
-
- sethi %hi(0xff00), %l2
- or %l2, %lo(0xff00), %l2
- ldd [%sp + (24 + 72) * 4], %l4 ! DIA1, debug instr addr 1
- stda %l4, [%l2]0x1
- nop
- nop
- nop
- nop
- ldd [%sp + (24 + 74) * 4], %l4 ! DDA1, debug data addr 1
- add %l2, 8, %l2
- stda %l4, [%l2]0x1
- nop
- nop
- nop
- nop
- ldd [%sp + (24 + 76) * 4], %l4 ! DDV1, debug data value 1
- add %l2, 8, %l2
- stda %l4, [%l2]0x1
- nop
- nop
- nop
- nop
- ld [%sp + (24 + 78) * 4], %l4 ! DCR, debug control reg
- ld [%sp + (24 + 79) * 4], %l5 ! DSR, debug control reg
- add %l2, 8, %l2
- or %l4, 0x200, %l4
- sta %l4, [%l2]0x1
- add %l2, 4, %l2
- sta %l5, [%l2]0x1
- nop
- nop
- nop
- nop
-
- ldd [%sp + (24 + 64) * 4], %l0 ! Y & PSR
- ldd [%sp + (24 + 68) * 4], %l2 ! PC & NPC
-
- restore ! Ensure that previous window is valid
- save %g0, %g0, %g0 ! by causing a window_underflow trap
-
- mov %l0, %y
- mov %l1, %psr ! Make sure that traps are disabled
- ! for rett
- sethi %hi(in_trap_handler), %l4
- ld [%lo(in_trap_handler) + %l4], %l5
- dec %l5
- st %l5, [%lo(in_trap_handler) + %l4]
-
- jmpl %l2, %g0 ! Restore old PC
- rett %l3 ! Restore old nPC
-");
-
-/* Convert ch from a hex digit to an int */
-
-static int
-hex(ch)
- unsigned char ch;
-{
- if (ch >= 'a' && ch <= 'f')
- return ch-'a'+10;
- if (ch >= '0' && ch <= '9')
- return ch-'0';
- if (ch >= 'A' && ch <= 'F')
- return ch-'A'+10;
- return -1;
-}
-
-/* scan for the sequence $<data>#<checksum> */
-
-static void
-getpacket(buffer)
- char *buffer;
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- unsigned char ch;
-
- do
- {
- /* wait around for the start character, ignore all other characters */
- while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
- checksum = 0;
- xmitcsum = -1;
-
- count = 0;
-
- /* now, read until a # or end of buffer is found */
- while (count < BUFMAX)
- {
- ch = getDebugChar() & 0x7f;
- if (ch == '#')
- break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- if (count >= BUFMAX)
- continue;
-
- buffer[count] = 0;
-
- if (ch == '#')
- {
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(getDebugChar() & 0x7f);
-#if 0
- /* Humans shouldn't have to figure out checksums to type to it. */
- putDebugChar ('+');
- return;
-#endif
- if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
- else
- {
- putDebugChar('+'); /* successful transfer */
- /* if a sequence char is present, reply the sequence ID */
- if (buffer[2] == ':')
- {
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
- /* remove sequence chars from buffer */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
- }
- }
- }
- }
- while (checksum != xmitcsum);
-}
-
-/* send the packet in buffer. */
-
-static void
-putpacket(buffer)
- unsigned char *buffer;
-{
- unsigned char checksum;
- int count;
- unsigned char ch;
-
- /* $<packet info>#<checksum>. */
- do
- {
- putDebugChar('$');
- checksum = 0;
- count = 0;
-
- while (ch = buffer[count])
- {
- if (! putDebugChar(ch))
- return;
- checksum += ch;
- count += 1;
- }
-
- putDebugChar('#');
- putDebugChar(hexchars[checksum >> 4]);
- putDebugChar(hexchars[checksum & 0xf]);
-
- }
- while ((getDebugChar() & 0x7f) != '+');
-}
-
-static char remcomInBuffer[BUFMAX];
-static char remcomOutBuffer[BUFMAX];
-
-/* Indicate to caller of mem2hex or hex2mem that there has been an
- error. */
-static volatile int mem_err = 0;
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * If MAY_FAULT is non-zero, then we will handle memory faults by returning
- * a 0, else treat a fault like any other fault in the stub.
- */
-
-static unsigned char *
-mem2hex(mem, buf, count, may_fault)
- unsigned char *mem;
- unsigned char *buf;
- int count;
- int may_fault;
-{
- unsigned char ch;
-
- set_mem_fault_trap(may_fault);
-
- while (count-- > 0)
- {
- ch = *mem++;
- if (mem_err)
- return 0;
- *buf++ = hexchars[ch >> 4];
- *buf++ = hexchars[ch & 0xf];
- }
-
- *buf = 0;
-
- set_mem_fault_trap(0);
-
- return buf;
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written */
-
-static char *
-hex2mem(buf, mem, count, may_fault)
- unsigned char *buf;
- unsigned char *mem;
- int count;
- int may_fault;
-{
- int i;
- unsigned char ch;
-
- set_mem_fault_trap(may_fault);
-
- for (i=0; i<count; i++)
- {
- ch = hex(*buf++) << 4;
- ch |= hex(*buf++);
- *mem++ = ch;
- if (mem_err)
- return 0;
- }
-
- set_mem_fault_trap(0);
-
- return mem;
-}
-
-/* This table contains the mapping between SPARC hardware trap types, and
- signals, which are primarily what GDB understands. It also indicates
- which hardware traps we need to commandeer when initializing the stub. */
-
-static struct hard_trap_info
-{
- unsigned char tt; /* Trap type code for SPARClite */
- unsigned char signo; /* Signal that we map this trap into */
-} hard_trap_info[] = {
- {1, SIGSEGV}, /* instruction access error */
- {2, SIGILL}, /* privileged instruction */
- {3, SIGILL}, /* illegal instruction */
- {4, SIGEMT}, /* fp disabled */
- {36, SIGEMT}, /* cp disabled */
- {7, SIGBUS}, /* mem address not aligned */
- {9, SIGSEGV}, /* data access exception */
- {10, SIGEMT}, /* tag overflow */
- {128+1, SIGTRAP}, /* ta 1 - normal breakpoint instruction */
- {255, SIGTRAP}, /* hardware breakpoint */
- {0, 0} /* Must be last */
-};
-
-/* Set up exception handlers for tracing and breakpoints */
-
-void
-set_debug_traps()
-{
- struct hard_trap_info *ht;
-
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- exceptionHandler(ht->tt, trap_low);
-
- /* In case GDB is started before us, ack any packets (presumably
- "$?#xx") sitting there. */
-
- putDebugChar ('+');
-
- initialized = 1;
-}
-
-asm ("
-! Trap handler for memory errors. This just sets mem_err to be non-zero. It
-! assumes that %l1 is non-zero. This should be safe, as it is doubtful that
-! 0 would ever contain code that could mem fault. This routine will skip
-! past the faulting instruction after setting mem_err.
-
- .text
- .align 4
-
-" STRINGSYM(fltr_set_mem_err) ":
- sethi %hi(" STRINGSYM(mem_err) "), %l0
- st %l1, [%l0 + %lo(" STRINGSYM(mem_err) ")]
- jmpl %l2, %g0
- rett %l2+4
-");
-
-static void
-set_mem_fault_trap(enable)
- int enable;
-{
- extern void fltr_set_mem_err();
- mem_err = 0;
-
- if (enable)
- exceptionHandler(9, fltr_set_mem_err);
- else
- exceptionHandler(9, trap_low);
-}
-
-asm ("
- .text
- .align 4
-
-" STRINGSYM(dummy_hw_breakpoint) ":
- jmpl %l2, %g0
- rett %l2+4
- nop
- nop
-");
-
-static void
-set_hw_breakpoint_trap(enable)
- int enable;
-{
- extern void dummy_hw_breakpoint();
-
- if (enable)
- exceptionHandler(255, dummy_hw_breakpoint);
- else
- exceptionHandler(255, trap_low);
-}
-
-static void
-get_in_break_mode()
-{
- set_hw_breakpoint_trap(1);
-
- asm("
- sethi %hi(0xff10), %l4
- or %l4, %lo(0xff10), %l4
- sta %g0, [%l4]0x1
- nop
- nop
- nop
- ");
-
- set_hw_breakpoint_trap(0);
-}
-
-/* Convert the SPARC hardware trap type code to a unix signal number. */
-
-static int
-computeSignal(tt)
- int tt;
-{
- struct hard_trap_info *ht;
-
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- if (ht->tt == tt)
- return ht->signo;
-
- return SIGHUP; /* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-
-static int
-hexToInt(char **ptr, int *intValue)
-{
- int numChars = 0;
- int hexValue;
-
- *intValue = 0;
-
- while (**ptr)
- {
- hexValue = hex(**ptr);
- if (hexValue < 0)
- break;
-
- *intValue = (*intValue << 4) | hexValue;
- numChars ++;
-
- (*ptr)++;
- }
-
- return (numChars);
-}
-
-/* Replacement for outbyte that sends a packet to GDB containing
- the character to be output. */
-
-static void
-outbyte_stub (int c)
-{
- static char buf[4];
-
- buf[0] = 'O';
- buf[1] = hexchars[(c >> 4) & 0xf];
- buf[2] = hexchars[c % 16];
- buf[3] = 0;
- putpacket (buf);
-}
-
-
-/*
- * This function does all command procesing for interfacing to gdb. It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-
-
-static void
-handle_exception (registers)
- unsigned long *registers;
-{
- int tt; /* Trap type */
- int sigval;
- int addr;
- int length;
- char *ptr;
- unsigned long *sp;
- unsigned long dsr;
-
-/* First, we must force all of the windows to be spilled out */
-
- asm(" save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- save %sp, -64, %sp
- restore
- restore
- restore
- restore
- restore
- restore
- restore
- restore
-");
-
- if (registers[PC] == (unsigned long)breakinst)
- {
- registers[PC] = registers[NPC];
- registers[NPC] += 4;
- }
- sp = (unsigned long *)registers[SP];
-
- dsr = (unsigned long)registers[DSR];
- if (dsr & 0x3c)
- {
- tt = 255;
- }
- else
- {
- tt = (registers[TBR] >> 4) & 0xff;
- }
-
- /* reply to host that an exception has occurred */
- sigval = computeSignal(tt);
- ptr = remcomOutBuffer;
-
- *ptr++ = 'T';
- *ptr++ = hexchars[sigval >> 4];
- *ptr++ = hexchars[sigval & 0xf];
-
- *ptr++ = hexchars[PC >> 4];
- *ptr++ = hexchars[PC & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)&registers[PC], ptr, 4, 0);
- *ptr++ = ';';
-
- *ptr++ = hexchars[FP >> 4];
- *ptr++ = hexchars[FP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */
- *ptr++ = ';';
-
- *ptr++ = hexchars[SP >> 4];
- *ptr++ = hexchars[SP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)&sp, ptr, 4, 0);
- *ptr++ = ';';
-
- *ptr++ = hexchars[NPC >> 4];
- *ptr++ = hexchars[NPC & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)&registers[NPC], ptr, 4, 0);
- *ptr++ = ';';
-
- *ptr++ = hexchars[O7 >> 4];
- *ptr++ = hexchars[O7 & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)&registers[O7], ptr, 4, 0);
- *ptr++ = ';';
-
- *ptr++ = 0;
-
- putpacket(remcomOutBuffer);
-
- __outbyte_hook = outbyte_stub;
-
- while (1)
- {
- remcomOutBuffer[0] = 0;
-
- getpacket(remcomInBuffer);
- switch (remcomInBuffer[0])
- {
- case '?':
- remcomOutBuffer[0] = 'S';
- remcomOutBuffer[1] = hexchars[sigval >> 4];
- remcomOutBuffer[2] = hexchars[sigval & 0xf];
- remcomOutBuffer[3] = 0;
- break;
-
- case 'd':
- /* toggle debug flag */
- break;
-
- case 'g': /* return the value of the CPU registers */
- {
- ptr = remcomOutBuffer;
- ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */
- ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */
- memset(ptr, '0', 32 * 8); /* Floating point */
- ptr = mem2hex((char *)&registers[Y],
- ptr + 32 * 4 * 2,
- 8 * 4,
- 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
- mem2hex((char *)&registers[DIA1], ptr,
- 8 * 4, 0); /* DIA1, DIA2, DDA1, DDA2, DDV1, DDV2, DCR, DSR */
- }
- break;
-
- case 'G': /* set the value of the CPU registers - return OK */
- {
- unsigned long *newsp, psr;
-
- psr = registers[PSR];
-
- ptr = &remcomInBuffer[1];
- hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */
- hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */
- hex2mem(ptr + 64 * 4 * 2, (char *)&registers[Y],
- 8 * 4, 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
- hex2mem(ptr + 72 * 4 * 2, (char *)&registers[DIA1],
- 8 * 4, 0); /* DIA1, DIA2, DDA1, DDA2, DDV1, DDV2, DCR, DSR */
-
- /* See if the stack pointer has moved. If so, then copy the saved
- locals and ins to the new location. This keeps the window
- overflow and underflow routines happy. */
-
- newsp = (unsigned long *)registers[SP];
- if (sp != newsp)
- sp = memcpy(newsp, sp, 16 * 4);
-
- /* Don't allow CWP to be modified. */
-
- if (psr != registers[PSR])
- registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f);
-
- strcpy(remcomOutBuffer,"OK");
- }
- break;
-
- case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
- /* Try to read %x,%x. */
-
- ptr = &remcomInBuffer[1];
-
- if (hexToInt(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length))
- {
- if (mem2hex((char *)addr, remcomOutBuffer, length, 1))
- break;
-
- strcpy (remcomOutBuffer, "E03");
- }
- else
- strcpy(remcomOutBuffer,"E01");
- break;
-
- case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
- /* Try to read '%x,%x:'. */
-
- ptr = &remcomInBuffer[1];
-
- if (hexToInt(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length)
- && *ptr++ == ':')
- {
- if (hex2mem(ptr, (char *)addr, length, 1))
- strcpy(remcomOutBuffer, "OK");
- else
- strcpy(remcomOutBuffer, "E03");
- }
- else
- strcpy(remcomOutBuffer, "E02");
- break;
-
- case 'c': /* cAA..AA Continue at address AA..AA(optional) */
- /* try to read optional parameter, pc unchanged if no parm */
-
- ptr = &remcomInBuffer[1];
- if (hexToInt(&ptr, &addr))
- {
- registers[PC] = addr;
- registers[NPC] = addr + 4;
- }
-
-/* Need to flush the instruction cache here, as we may have deposited a
- breakpoint, and the icache probably has no way of knowing that a data ref to
- some location may have changed something that is in the instruction cache.
- */
-
- flush_i_cache();
- return;
-
- /* kill the program */
- case 'k' : /* do nothing */
- break;
-#if 0
- case 't': /* Test feature */
- asm (" std %f30,[%sp]");
- break;
-#endif
- case 'r': /* Reset */
- asm ("call 0
- nop ");
- break;
-
-#if 0
-Disabled until we can unscrew this properly
-
- case 'b': /* bBB... Set baud rate to BB... */
- {
- int baudrate;
- extern void set_timer_3();
-
- ptr = &remcomInBuffer[1];
- if (!hexToInt(&ptr, &baudrate))
- {
- strcpy(remcomOutBuffer,"B01");
- break;
- }
-
- /* Convert baud rate to uart clock divider */
- switch (baudrate)
- {
- case 38400:
- baudrate = 16;
- break;
- case 19200:
- baudrate = 33;
- break;
- case 9600:
- baudrate = 65;
- break;
- default:
- strcpy(remcomOutBuffer,"B02");
- goto x1;
- }
-
- putpacket("OK"); /* Ack before changing speed */
- set_timer_3(baudrate); /* Set it */
- }
-x1: break;
-#endif
- } /* switch */
-
- /* reply to the request */
- putpacket(remcomOutBuffer);
- }
-}
-
-/* This function will generate a breakpoint exception. It is used at the
- beginning of a program to sync up with a debugger and can be used
- otherwise as a quick means to stop program execution and "break" into
- the debugger. */
-
-void
-breakpoint()
-{
- if (!initialized)
- return;
-
- asm(" .globl " STRINGSYM(breakinst) "
-
- " STRINGSYM(breakinst) ": ta 1
- ");
-}
-
-static void
-hw_breakpoint()
-{
- asm("
- ta 127
- ");
-}