diff options
Diffstat (limited to 'libgloss/hp74x/Makefile.in')
| -rw-r--r-- | libgloss/hp74x/Makefile.in | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/libgloss/hp74x/Makefile.in b/libgloss/hp74x/Makefile.in new file mode 100644 index 0000000..5a90c9b --- /dev/null +++ b/libgloss/hp74x/Makefile.in @@ -0,0 +1,215 @@ +# +# Makefile +# Copyright (C) 1990, 1991, 1992, 1993 ,1994 Free Software Foundation +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +# + +# +# Makefile for newlib/libc/stub/hppa. This is the board support code +# for the HP-PRO hppa embedded boards. <rob@cygnus.com> +# + +VPATH = @srcdir@ +srcdir = @srcdir@ +objdir = . +srcroot = $(srcdir)/../.. +objroot = $(objdir)/../.. + +prefix = @prefix +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +tooldir = $(exec_prefix)/$(target_alias) + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +SHELL = /bin/sh + +CC = @CC@ + +AS = @AS@ +AR = @AR@ +LD = @LD@ +RANLIB = @RANLIB@ + +# +# As the boot process only deals with LIF volumes, here's the src +# where we borrow existing code modules and where we put our +# boot image if we can bvuild one. +# +LIF_SRC = /usr/tftpdir/srcboot.lif +LIF_DEST = /usr/tftpdir/romboot.lif + +HPDEFS = -D_INCLUDE_POSIX_SOURCE -D_INCLUDE_XOPEN_SOURCE \ + -D_INCLUDE_HPUX_SOURCE -DPCXT + +LIBS_FOR_TARGET = -lc + +# +# The original flags used by HP for the boot ROMS were +# CFLAGS_FOR_TARGET = -c -Aa +O3 +OS -Wc,-DA1.0 -Wc,-DS1.0 +ESfic +ESsfc ${HPDEFS} +CFLAGS_FOR_TARGET = -c -Wd,-a -g +# the original value for -R was 0 +LDFLAGS_FOR_TARGET = -v -t -N -R 10000 -a archive +INCLUDES = -I${srcdir} + +BSP_OBJS= pa_stub.o debugger.o iva_table.o io.o +STUBCRT0=crt0.o +STUBLIB=hppa.o +LDSCRIPT=hppa.ld +SHARED_DIR= +SHARED_OBJS= +# SHARED_OBJS=$(SHARED_DIR) + +# Host specific makefile fragment comes in here. +@host_makefile_frag@ + +all: boot + +# this target is only for testing +test: ${STUBCRT0} $(STUBLIB) test.o $(BSP_OBJS) +# ${LD} $(LDFLAGS_FOR_TARGET) ${STUBCRT0} test.o $(BSP_OBJS) -o test $(LIBS_FOR_TARGET) + rootme=`pwd` ; \ + ${LD} $(LDFLAGS_FOR_TARGET) ${STUBCRT0} test.o pa_stub.o debugger.o iva_table.o io.o -o test $(LIBS_FOR_TARGET) + +$(STUBLIB): $(BSP_OBJS) + ${LD} -r $(BSP_OBJS) $(SHARED_OBJS) -o $(STUBLIB) + +checksum: $(srcdir)/checksum.c + $(CC) -g $(srcdir)/checksum.c -o checksum + +# this is the target from HP's Makefile, it may be bogus +hpstub: $(OBJS) + $(LD) $(LDFLAGS_FOR_TARGET) -e main -o $@ $(LIBRARY)/crt1.o \ + $(OBJS) -lc -m >stub.map + +install: + $(INSTALL_PROGRAM) $(STUBLIB) $(tooldir)/lib/$(MULTISUBDIR)$(STUBLIB) + $(INSTALL_PROGRAM) $(SHARED_DIR)/$(STUBCRT0) $(tooldir)/lib/$(MULTISUBDIR)$(STUBCRT0) + $(INSTALL_PROGRAM) $(srcdir)/$(LDSCRIPT) $(tooldir)/lib/$(LDSCRIPT) + +.c.o: + $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $< + +.c.s: + $(CC) $(CFLAGS_FOR_TARGET) -S $(INCLUDES) $< +# $(CC) $(CFLAGS_FOR_TARGET) $(NEWLIB_CFLAGS) $(INCLUDES) -c $< + +.s.o: + $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $< +# $(AS) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $< + +.SUFFIXES: .S .c .o .s .lif +# +# lifinit -- +# -vnnn Sets volume size to nnn bytes. +# nnn must be a multiple of 256. +# -d Sets directory size to nnn file entries. +# nnn must be a multiple of 8. +# -nsss Sets the volume name to be sss. +# -Knnn Forces the directory start location to be the +# nearest multiple of nnn x 1024 bytes. +# -snnn set the initial system load (ISL) start address to +# nnn in the volume label +# -lnnn Specifies the length in bytes of the ISL code. +# -ennn Set the ISL entry point to nnn bytes from the +# beginning of the ISL +# +# lifcp -- +# -r Forces RAW mode copying. +# -T Sets the file type of the directory entry. +# ASCII is 1 +# BIN is -23951 +# BINARY is -2 +# -Knnn forces each file copied in to begin on a nnn x +# 1024-byte boundary from the beginning of the volume +# Note: the word echoed below MUST be 10 characters exactly. +# +# somxtract infile outfile -- +# converts a series 800 file *only* into a raw image +# +LIF_VOL = this_lif +# 65532 +boot: test checksum +# FIXME: This fills up the hard disk unless "-R" is used + @rm -f ${LIF_VOL} ${LIF_DEST} + @ipl_entry=`nm -t d $< | grep "T .START." | sed -e 's/T .START.//' -e 's/^0*//'` ; \ + echo "Entry point is at $${ipl_entry}" ; \ + if test x"$${ipl_entry}" != x ; then \ + ipl_entry=`expr $${ipl_entry} - 65536` ; \ + echo "Entry point offset is $${ipl_entry}" ; \ + cp $< $<.raw ; \ + rm -f $<.dis ; \ + objdump -d $< > $<.dis ; \ + somxtract $< $<.raw ; \ + ipl_size=`checksum -s $<.raw $<.image | sed -e 's/ is the.*//'` ; \ + echo "IPL_SIZE is $${ipl_size}" ; \ + lifinit -v64000000 -d64 -n"CYGNUS " -K2 -s4096 -l$${ipl_size} -e$${ipl_entry} ${LIF_DEST} ;\ + else \ + echo "ERROR: \$$START\$$ symbol not found" ; \ + fi + @chmod a+rw $<.image + @lifcp -r -K2 $<.image ${LIF_DEST}:TEST + @rm -f $<.image $<.dis + @lifls -l ${LIF_DEST} + @objdump -d $< > $<.dis + +.S.o: + rm -f $*.s + ${CPP} $< > $*.s + $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $*.s +# $(CC) $(CFLAGS_FOR_TARGET) $(NEWLIB_CFLAGS) $(INCLUDES) -c $< + +.c.list: + $(CC) $(CFLAGS) $*.c -S + $(AS) $(AFLAGS) $*.s -Wa,-l > $*.list + rm $*.s + +.s.list: + $(AS) $(AFLAGS) $*.s -Wa,-l > $*.list + +doc: + +clean mostlyclean: + rm -f *~ *.map *.list stub romboot.lif a.out *.raw *.image + rm -f *.o $(STUBLIB) $(STUBCRT0) checksum *.dis test + +distclean maintainer-clean realclean: clean + rm -f Makefile config.cache config.log config.status + +pa_stub.o: $(srcdir)/pa_stub.c +debugger.o: $(srcdir)/debugger.s +iva_table.o: $(srcdir)/iva_table.s +io.o: $(srcdir)/io.c +crt0.o: $(srcdir)/crt0.s +test.o: $(srcdir)/test.c +term_in.o: $(srcdir)/term_in.s +term_out.o: $(srcdir)/term_out.s +term_init.o: $(srcdir)/term_init.s + +.PHONY: info install-info clean-info +info: +install-info: +clean-info: + +Makefile: Makefile.in config.status @host_makefile_frag_path@ + $(SHELL) config.status + +config.status: configure + $(SHELL) config.status --recheck |